Articles by Journal

Week 17

(4/20-4/24)2009

Home

Polymer Track (News)
Updated daily

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

01.  Advances in Polymer Technology 27 #3 (2008)
(Titles and Abstracts)

Efficient utilization of plastic waste through product design and process adaptation: A case study on stiffness enhancement of beams produced from plastic lumber 
(p 133-142) Advances in Polymer Technology 27 #3 (2008)
Abstract

Physically and chemically modified polycarbonate by metal ion implantation 
(p 143-151) Advances in Polymer Technology 27 #3 (2008)
Abstract

Synthesis and characterization of hybrid nanocomposites comprising poly(vinyl alcohol) and colloidal silica 
(p 152-162) Advances in Polymer Technology 27 #3 (2008)
Abstract

Carbon fiber composites cured by -radiation-induced polymerization of an epoxy resin matrix 
(p 163-171) Advances in Polymer Technology 27 #3 (2008)
Abstract

Study of oriented polyvinyl chloride pipes by inner-pressing expansion
(p 172-181) Advances in Polymer Technology 27 #3 (2008)
Abstract

******************************************

Advances in Polymer Technology 27 #4 (2008)
(Titles and Abstracts)

Overview of polymer micro/nanomanufacturing for biomedical applications 
(p 188-198)  Advances in Polymer Technology 27 #4 (2008)
Abstract

Process optimization and effects of material properties on numerical prediction of warpage for injection molding 
(p 199-216)  Advances in Polymer Technology 27 #4 (2008)
Abstract

Injection molding control: From single cycle to batch control 
(p 217-223)  Advances in Polymer Technology 27 #4 (2008)
Abstract

Variable mold temperature to improve surface quality of microcellular injection molded parts using induction heating technology 
(p 224-232)  Advances in Polymer Technology 27 #4 (2008)
Abstract

Review Article
Rapid thermal cycling of injection molds: An overview on technical approaches and applications 
(p 233-255)  Advances in Polymer Technology 27 #4 (2008)
Abstract  

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

02.  AIChE Journal 55 #5 (2008)
(Titles and Abstracts) (T)

Agglomeration modeling of small and large particles by a diffusion theory approach 
(p 1127-1134) AIChE Journal 55 #5 (2008)
Abstract

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

03.  Chemical Engineering and Processing 48, #5 (2009)
(Titles and Abstracts) (T)

The microwave processing of wood using a continuous microwave belt drier
(997-1003) Chemical Engineering and Processing 48, #5 (2009)

Separation of isopropyl alcohol–water mixtures by pervaporation using crosslink IPN membranes
(1020-1029) Chemical Engineering and Processing 48, #5 (2009)

Interfacial polycondensation of polyarylate in Taylor-Couette-Reactor
(1061-1071) Chemical Engineering and Processing 48, #5 (2009)

Technical and economical feasibility of zeolite NaA membrane-based reactors in liquid-phase etherification reactions
(1072-1079) Chemical Engineering and Processing 48, #5 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

04.   Chemical Week 
Titles and Abstracts) Weekly (H)
Trade Journal

No articles selected

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

05.  e-Polymers (4/21/2009) (42)
(Titles, Abstracts and Articles)

042[2009]  Influences of crystallinity on the response of bone marrow stromal cells to the polymeric substrates
e-Polymers (4/21/2009) (42)
[Abstract]

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

06.  European Polymer Journal 45  #5 (2009)
(Titles and Abstracts) (H)

Review
Chitosan for coagulation/flocculation processes – An eco-friendly approach
(1337-1348) European Polymer Journal 45  #5 (2009)

Physical properties of ion beam treated electrospun poly(vinyl alcohol) nanofibers
(1349-1358) European Polymer Journal 45  #5 (2009)

Graft polymerization from pore wall of three-dimensionally ordered macroporous cross-linked polystyrene via atom transfer radical polymerization
(1359-1366) European Polymer Journal 45  #5 (2009)

Nanowear studies in chemically heterogeneous responsive polymeric brushes by surface force microscopy
(1367-1376) European Polymer Journal 45  #5 (2009)

The diverse effect of antiplasticizer in the molecular dynamics of an organic dye-doped polymer observed at different motional lengthscales
(1377-1384) European Polymer Journal 45  #5 (2009)

Dependence of nanophase separated structure of epoxy hydrogels on swelling conditions investigated by SANS
(1385-1390) European Polymer Journal 45  #5 (2009)

Sorption of silicic acid from non-saturated aqueous solution by a complex of zinc ions with poly(vinylamine)
(1391-1396) European Polymer Journal 45  #5 (2009)

Preparation and characteristics of hydroxypropyl-β-cyclodextrin polymeric nanocapsules loading nimodipine
(1397-1402) European Polymer Journal 45  #5 (2009)

Synthesis, characterization and flocculation performance of zwitterionic copolymer of acrylamide and 4-vinylpyridine propylsulfobetaine
(1403-1411) European Polymer Journal 45  #5 (2009)

Surface modification and characterization of thermoplastic polyurethane
(1412-1419) European Polymer Journal 45  #5 (2009)

Preparation of a new lightly cross-linked liquid crystalline polyamide by interfacial polymerization. Application to the obtainment of microcapsules with photo-triggered release
(1420-1432) European Polymer Journal 45  #5 (2009)

Thiol–ene UV-curable coatings using vegetable oil macromonomers
(1433-1441) European Polymer Journal 45  #5 (2009)

The chemical and dielectric properties of epoxy/(Ba_0.8Sr_0.2)(Ti_0.9Zr_0.1)O₃ composites for embedded capacitor application
(1442-1447) European Polymer Journal 45  #5 (2009)

Study on the chemical modification of epoxy/anhydride thermosets using a hydroxyl terminated hyperbranched polymer
(1454-1466) European Polymer Journal 45  #5 (2009)

Synthesis and characterization of sulfonated naphthalenic polyimides based on 4,4′-diaminodiphenylether-2,2′-disulfonic acid and bis[4-(4-aminophenoxy)phenylhexafluoropropane] for fuel cell applications
(1467-1475) European Polymer Journal 45  #5 (2009)

New azo-peroxidic initiators in the radical polymerization of styrene and methyl methacrylate
(1476-1484) European Polymer Journal 45  #5 (2009)

Transmission electron microscopy study of phase morphology in polypropylene/ethylene-octene copolymer blends
(1485-1492) European Polymer Journal 45  #5 (2009)

³¹P NMR spectroscopy in benzoxazine model compounds and benzoxazine chemistry – main chain and end group studies
(1493-1505) European Polymer Journal 45  #5 (2009)

Primary and secondary dielectric relaxations in semi-crystalline and amorphous starch
(1506-1515) European Polymer Journal 45  #5 (2009)

Improved polyHEMA–DAQ films for the optical analysis of nitrite
(1516-1523) European Polymer Journal 45  #5 (2009)

Water transport in epoxy–aliphatic amine networks – Influence of curing cycles
(1524-1534) European Polymer Journal 45  #5 (2009)

Glycolysis of poly(ethylene terephthalate) catalyzed by ionic liquids
(1535-1544) European Polymer Journal 45  #5 (2009)

Carbazole–oxadiazole containing polyurethanes as phosphorescent host for organic light emitting diodes
(1545-1553) European Polymer Journal 45  #5 (2009)

Effects of SEBS-g-BTAI on the morphology, structure and mechanical properties of PA6/SEBS blends
(1554-1560) European Polymer Journal 45  #5 (2009)

Synthesis and characterization of fluorinated poly(imide siloxane) block copolymers
(1561-1569) European Polymer Journal 45  #5 (2009)

Synthesis of polyrotaxanes consisting of multiple α-cyclodextrin rings threaded on reverse Pluronic PPO–PEO–PPO triblock copolymers based on block-selected inclusion complexation
(1570-1579) European Polymer Journal 45  #5 (2009)

A study of correlations between structural properties and phase behaviour of polyelectrolyte systems: Effects of size and chain form factor
(1580-1585) European Polymer Journal 45  #5 (2009)

Synthesis and characterization of new polyphenols derived from o-dianisidine: The effect of substituent on solubility, thermal stability, and electrical conductivity, optical and electrochemical properties
(1586-1598) European Polymer Journal 45  #5 (2009)

Preparation and properties of new ortho-linked polyamide-imides bearing ether, sulfur, and trifluoromethyl linkages
(1599-1606) European Polymer Journal 45  #5 (2009)

Differential reactivity of aromatic diamines during polyimide formation in water
(1607-1616) European Polymer Journal 45  #5 (2009)

Investigation into the gelation and crystallization of polyacrylonitrile
(1617-1624) European Polymer Journal 45  #5 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

07.  Journal of Applied Polymer  Science 113 #1 (2009)
(Titles and Abstracts) (H) 

Terpolymer resin VIII: Chelation ion-exchange properties of 2,4-dihydroxybenzophenone-oxamide-formaldehyde terpolymer resins 
(p 1-9) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Thermal cure behavior and pyrolysis of methyl-tri(phenylethynyl)silane resin 
(p 10-16) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Nonisothermal decomposition kinetics of nylon 1010/POSS composites 
(p 17-23) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Optimization of preparation conditions of carboxymethyl potato starch through orthogonal experimental design 
(p 24-33) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

A starch-based biodegradable film modified by nano silicon dioxide 
(p 34-40) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract  

Studies on preparation of PGMA/Al₂O₃ and its effect on impact strength of epoxy resin 
(p 41-48) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Mechanical relaxation of medical grade UHMWPE of different crosslink density as prepared by electron beam irradiation 
(p 49-59) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract  

The study on poly(ether sulfone) modified cyanate ester resin and epoxy resin cocuring blends 
(p 60-70) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Influence of oxygen plasma treatment on interfacial properties of poly(p-phenylene benzobisoxazole) fiber-reinforced poly(phthalazinone ether sulfone ketone) composite 
(p 71-77) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Preparation and electrochemical studies of layered PANI/HNb₃O₈ nanocomposite 
(p 78-86) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Influence of silicone phosphate on the transesterification in PBT/PC blends 
(p 87-95) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Electrochemical polymerization of 2-phenylindole and characterization of its polymer 
(p 96-103) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Novel hydrogels based on itaconic acid and citraconic acid: Synthesis, metal ion binding, and swelling behavior 
(p 104-111) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Effect of plasticizer on the crystallization behavior of poly(lactic acid) 
(p 112-121) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Genetic algorithm for the determination of linear viscoelastic relaxation spectrum from experimental data 
(p 122-135) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract  

Electropolymerization of N-hydroxyethylcarbazole on carbon fiber microelectrodes 
(p 136-142) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Effect of interaction between hydroxyl group and high valence metal ion impurity on the electrospinnability of polyvinyl alcohols 
(p 143-149) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Effect of oligosaccharide accumulated in the coagulation bath on the lyocell fiber process during industrial production 
(p 150-156) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract  

Pervaporation-aided dehydration and esterification of acetic acid with ethanol using 4A zeolite-filled cross-linked sodium alginate-mixed matrix membranes 
(p 157-168) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Thermodynamic study of surfaces of liquid polybutadienes and their interfaces with poly(dimethylsiloxane) 
(p 169-180) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Investigation on the fracture behavior and morphology of maleated poly(ethylene 1-octene) toughened and glass fiber-reinforced nylon 1010 
(p 181-189) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Simultaneous continuous, nonchromatographic monitoring and discrete chromatographic monitoring of polymerization reactions 
(p 190-198) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Effects induced by gamma irradiation on free-volumes, mechanical, and thermal properties of flame- and non flame-retardant polyvinylchloride 
(p 199-206) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Preparation and structure control of hollow polymer particles: Influence of seeded emulsion polymerization and alkalization treatment process 
(p 207-215) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Studies on the curing kinetics and thermal stability of diglycidyl ether of bisphenol-A using mixture of novel, environment friendly sulphur containing amino acids and 4,4-diaminodiphenylsulfone 
(p 216-225) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Effects of some electrospinning parameters on morphology of natural silk-based nanofibers 
(p 226-234) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Structural changes and development of transport properties during the conversion of a polyimide membrane to a carbon membrane 
(p 235-242) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Hydration and proton conduction in Nafion/ceramic nanocomposite membranes produced by solid-state processing of powders from mechanical attrition 
(p 243-250) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Synthesis, characterization and evaluation of novel methoxypolyethyleneglycol- grafted- poly(ester-urethane)s for controlled release of repaglinide 
(p 251-257) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Composition optimization of poly(vinyl alcohol)-/cornstarch-blended biodegradable composite using response surface methodology 
(p 258-264) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Thermal characteristics and crystallinity of Ziegler-Natta isotactic polypropylene/metallocene isotactic polypropylene polyblended fibers 
(p 265-273) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Preparation of PVA/PAN bicomponent nanofiber via electrospinning and selective dissolution 
(p 274-282) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Ablation and thermal properties of ethylene-propylene-diene elastomer composites reinforced with polysulfonamide short fibers 
(p 283-289) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Grafting of polypropylene and its potential use as metal ion adsorption resin 
(p 290-298) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Heterogeneous dispersion of the compatibilizer in the injection molding of polyamide 6/polypropylene blends 
(p 299-305) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Study on microstructure of PET/nanopowder composites 
(p 306-315) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Dielectric analysis of chlorinated polyvinyl chloride stabilized with di-n-octyltin maleate 
(p 316-320) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Thermosensitive phase transition kinetics of poly(N-isopropylacryl amide-co-acrylamide) microgel aqueous dispersions 
(p 321-326) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Preparation a novel pH-sensitive blend hydrogel based on polyaspartic acid and ethylcellulose for controlled release of naproxen sodium
(p 327-336) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Piezoresistivity of silicone-rubber/carbon black composites excited by Ac electrical field 
(p 337-341) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Sorption and transport properties of the semi-interpenetrating network based on crosslinked poly(vinyl alcohol) and poly(styrene sulfonic acid-co-maleic anhydride) as proton-conducting membranes 
(p 342-350) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract  

Poly(2-(methacryloyloxy) ethyl phosphorylcholine)-functionalized multi-walled carbon nanotubes: Preparation, characterization, solubility, and effects on blood coagulation 
(p 351-357) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract  

Electromagnetic and electrical properties of coated cotton fabric with barium ferrite doped polyaniline film 
(p 358-366) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Polypropylene nanocomposites prepared with natural and ODTABr-modified montmorillonite 
(p 367-374) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Synthesis of poly(methyl methacrylate) nanoparticles initiated by azobisisobutyronitrile using a differential microemulsion polymerization technique 
(p 375-382) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Thermal and electrical properties of copoly(1,3,4-oxadiazole-ethers) containing fluorene groups 
(p 383-391) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Linear and branched polyoxide-based copolymers: Methods to determine the CMC 
(p 392-399) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Preparation and characterization of a novel thermosensitive hydrogel based on chitosan and gelatin blends 
(p 400-407) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract  

Cure properties of self-extinguishing epoxy resin systems with microencapsulated latent catalysts for halogen-free semiconductor packaging materials 
(p 408-417) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Photografting of methyl methacrylate onto high-density polyethylene initiated by aliphatic ketones 
(p 418-426) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Manipulation of polymer layer characteristics by electrochemical polymerization from mixtures of aniline and ortho-phenylenediamine monomers 
(p 427-436) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Reverse atom transfer radical graft polymerization of 4-vinylpyridine onto inorganic oxide surfaces 
(p 437-449) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Electrical resistivity of polycarbonate/multiwalled carbon nanotube composites under varying injection molding conditions 
(p 450-455) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

High-quality cellulose triacetate prepared from bamboo dissolving pulp 
(p 456-465) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

The enhanced mechanical properties of a covalently bound chitosan-multiwalled carbon nanotube nanocomposite 
(p 466-472) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Synthesis and characterization of novel polyurethane crosslinked by linear oligo[bis-(phenoxy)_1.8(4-hydroxybutaneoxy)_0.2 phosphazene] 
(p 473-478) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Preparation and properties of bio-based epoxy montomorillonite nanocomposites derived from polyglycerol polyglycidyl ether and -polylysine 
(p 479-484) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Structural and material properties of a rapidly cured thermoplastic-toughened epoxy system 
(p 485-491) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Elucidation of the nanoparticle effect on the grafting of vinyl monomers onto cotton fabric 
(p 492-501) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Experimental failure analysis of two-serial-bolted composite plates 
(p 502-515) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Effect of creep strain on the optomechanical properties and some structural properties of terylene fibers 
(p 516-525) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Electrohydrodynamic liquid atomization of biodegradable polymer microparticles: Effect of electrohydrodynamic liquid atomization variables on microparticles 
(p 526-534) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Cationic polymerization of ethylene oxide with Maghnite-H as a clay catalyst in the presence of ethylene glycol 
(p 535-540) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Synthesis, characterization, and curing properties of novel phosphorus-containing naphthyl epoxy systems 
(p 541-546) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Reentrant phase transition and fast responsive behaviors of poly{N-[3-(dimethylaminopropyl)] methacrylamide} hydrogels prepared in poly(ethylene glycol) solutions 
(p 547-552) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Latex film performance of styrene-acrylic particles functionalized with acrylic acid 
(p 553-557) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Toughening of poly(L-lactide) by melt blending with rubbers 
(p 558-566) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Effect of artificial perspiration and cleaning chemicals on the mechanical and chemical properties of ballistic materials 
(p 567-584) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Preparation and characterization of poly(butylene terephthalate) nanocomposites with various organoclays 
(p 585-592) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract  

Wood particle/high-density polyethylene composites: Thermal sensitivity and nucleating ability of wood particles 
(p 593-600) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Deterioration of polypropylene/silicon dioxide nanocomposites before oxidative degradation 
(p 601-606) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Removal of Basic Blue 3 by sorption onto a weak acid acrylic resin 
(p 607-614) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Adsorption of anionic textile dye Acid Green 9 from aqueous solution onto weak or strong base anion exchangers 
(p 615-627) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Reaction of phenol- and thiophenol-terminated compounds with bisoxazolines 
(p 628-636) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Synthesis of new phase transfer-catalyzed free radical polymerization of ethyl methacrylate: A kinetic study 
(p 637-643) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Preparation and characterization of poly(vinylidene fluoride) nanocomposites containing multiwalled carbon nanotubes 
(p 644-650) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Modeling thermomechanical behaviors of shape memory polymer 
(p 651-656) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Hardness of irradiated hydroxyethyl methacrylate copolymer at elevated temperatures 
(p 657-661) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Viscoelastic behavior and submolecular level dynamic heterogeneity of hydrogen-bonded polymer blends probed by dynamic FTIR spectroscopy 
(p 662-666) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Nanoclay exfoliation in rubber compounds characterized by online measurements of electrical conductance 
(p 667-677) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract

Exfoliation of organically modified montmorillonite driven by molecular diffusion in maleated polypropylene
(p 678-684) Journal of Applied Polymer  Science 113 #1 (2009)
Abstract  

Journal of Applied Polymer  Science 113 #2 (2009)
(Titles and Abstracts) (H)

Preparation and properties of a carboxyl-terminated butadiene acrylonitrile toughened epoxy/montmorillonite nanocomposite 
(p 685-692) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract  

Viscoelastic behavior of rubber under a complex loading 
(p 693-699) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Investigations of chemically synthesized poly(aniline-co-o-toluidine)s doped with dodecylbenzenesulfonic acid 
(p 700-708) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Bulk free-radical polymerization of styrene on a spinning disc reactor 
(p 709-715) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Comparative study of the mechanical properties of fiber-reinforced denture base resin 
(p 716-720) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Acrylic rubber/nitrile rubber blends: The effect of curatives on the mechanical, morphological, and dynamic mechanical properties 
(p 721-729) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Monitoring cure in epoxies containing carbon nanotubes with an optical-fiber Fresnel refractometer 
(p 730-735) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Performance and characterization of irradiated poly(vinyl alcohol)/polyvinylpyrrolidone composite hydrogels used as cartilages replacement 
(p 736-741) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Conductive polymer tape containing highly oriented carbon nanofillers 
(p 742-751) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract  

Effect of low-molar-mass liquid crystal on the melt processing conditions of polycarbonate using single screw extruder 
(p 752-756) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract  

Copper (II) ions and copper nanoparticles-loaded chemically modified cotton cellulose fibers with fair antibacterial properties 
(p 757-766) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Synthesis and characterization of novel wholly para-oriented aromatic polyamide-hydrazides containing sulfone-ether linkages 
(p 767-776) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Thermal, optical, and water sorption properties in composite films of poly(ether imide) and bismaleimides: Effect of chemical structure 
(p 777-783) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Functionalization of ethylene-propylene-diene monomer rubber with maleic anhydride in the melt state through high-shear stress-induced initiation 
(p 784-792) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Use of lignin strengthened with modified wheat gluten in biodegradable composites 
(p 793-801) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Control of microvoids in resol phenolic resin using unsaturated polyester 
(p 802-810) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract  

Controlling the release of active iron and manganese ions from styrene-butadiene rubber-binding matrix containing chloride salts of them 
(p 811-817) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Synthesis and antimicrobial activity of metronidazole containing polymer and copolymers 
(p 818-826) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Synthesis, characterization, and anticorrosive coating properties of waterborne interpenetrating polymer network based on epoxy-acrylic-oleic acid with butylated melamine formaldehyde 
(p 827-838) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Polyurethane elastomers based on 1,3 and 1,4-bis(isocyanatomethyl)cyclohexane 
(p 839-848) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Formulation and curing characteristics of EPDM/NR and EPDM/SBR polyblends used in metallic surfaces rubber lining 
(p 849-854) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Preparation and characterization of a solid polymer electrolyte PEO-ENR50 (80/20)-LiCF₃SO₃ 
(p 855-859) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Application of urea/H₂O₂ activation-oxidation system in degradation of PVA and desizing of polyester/cotton fabric 
(p 860-867) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Effects of ultrasonic irradiation on the morphology of chemically prepared polyaniline nanofibers 
(p 868-875) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Characterization, crystallization kinetics, and melting behavior of poly(ethylene succinate) copolyester containing 7 mol % butylene succinate 
(p 876-886) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

UV-VIS absorption and NIR-stimulated emission of Nd³⁺: PVA films 
(p 887-895) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Synthesis and photopolymerization kinetics of multifunctional aliphatic urethane acrylates containing the tertiary amine group 
(p 896-900) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Determination of crystallinity ratio and some physicochemical properties of poly(4-methyl-1-pentene) 
(p 901-906) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Crystallization behavior of wet brush and dry brush blends of PS-b-PEO-b-PS/h-PEO 
(p 907-915) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Fabrication of pH-responsive molecularly imprinted polyethersulfone particles for bisphenol-A uptake 
(p 916-921) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Polypropylene-organoclay nanocomposite: Preparation, microstructure, and mechanical properties 
(p 922-926) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Electrospun nanocomposites from polystyrene loaded with cellulose nanowhiskers 
(p 927-935) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Comparative study of the release kinetics of osmotically active solutes from hydrophobic elastomeric matrices combined with the characterization of the depleted matrices 
(p 936-949) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Influence of EMAA compatibilizer on the structure and properties of HDPE/hydrotalcite nanocomposites prepared by melt mixing 
(p 950-958) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Self-organization of amphiphilic poly[2-(methacryloyloxy)ethyl phosphorylcholine] carrying tocopheryl moieties as terminal groups 
(p 959-965) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Activated charcoal-loaded composite membranes of sodium alginate in pervaporation separation of water-organic azeotropes 
(p 966-975) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Residual stress and mechanical properties of polyimide thin films 
(p 976-983) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Synthesis of zwitterionic stationary phase based on hydrophilic non-porous poly(glycidymethacrylate-co-ethylenedimethacrylate) beads and their application for fast separation of proteins 
(p 984-991) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Enhancement of the surface and bulk mechanical properties of polystyrene through the incorporation of raw multiwalled nanotubes with the twin-screw mixing technique 
(p 992-999) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Effects of wheat straw fiber content and characteristics, and coupling agent concentration on the mechanical properties of wheat straw fiber-polypropylene composites 
(p 1000-1007) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

A novel method to control microcapsule release behavior via photo-crosslink polyurethane acrylate shells 
(p 1008-1016) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Methylolation of melamine with incipient condensation. II. Mathematical modeling 
(p 1017-1029) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Methylolation of melamine with incipient condensation. I. Synthesis and characterization 
(p 1030-1041) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Cure characterization of soybean oil - Styrene - Divinylbenzene thermosetting copolymers 
(p 1042-1049) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Synthesis of highly efficient D-naproxen imprinted polymer and investigation of their specific performance 
(p 1050-1062) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Effect of electron beam irradiation on the silk fibroin fiber/poly(-caprolactone) composite 
(p 1063-1069) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Preparation and comparison of two electrodes for supercapacitors: Pani/CNT/Ni and Pani/Alizarin-treated nickel
(p 1070-1081) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Ultrasonic sealing of polyester and spectra fabrics using thermo plastic properties 
(p 1082-1089) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract  

A novel route of synthesis, characterization of terephthalic dihydrazide from polyethylene terephthalate waste and it's application in PVC compounding as plasticizer 
(p 1090-1096) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Negative air ion releasing properties of tourmaline/bamboo charcoal compounds containing ethylene propylene diene terpolymer/polypropylene composites
(p 1097-1110) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Synthesis, characterization, and hydrolytic degradation of biodegradable poly(ether ester)-urethane copolymers based on -caprolactone and poly(ethylene glycol) 
(p 1111-1119) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Cellulose mercerization: Use of amino acid-glycerol ethers as wetting agents 
(p 1120-1124) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Preparation and application of Norfloxacin-MIP/polysulfone blending molecular imprinted polymer membrane 
(p 1125-1132) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Preparation of bovine serum albumin-imprinted calcium polyacrylate/alginate hybrid microspheres via Ca²⁺ crosslinking 
(p 1133-1140) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Study on the structure of nylon 6 films iodinated before forming. III. Fine structure variation of the amorphous film through deiodination 
(p 1141-1145) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Studies on ethylene-propylene-diene rubber modification by N-chlorothio-N-butyl-benzenesulfonamide 
(p 1146-1154) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Performance studies of heterogeneous ion exchange membranes in the removal of bivalent metal ions in an electrodialysis stack 
(p 1155-1164) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Mechanical reinforcement of poly(1-butene) using polypropylene-grafted multiwalled carbon nanotubes 
(p 1165-1172) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

New anthracene-containing phenylene- or thienylene-vinylene copolymers: Synthesis, characterization, photophysics, and photovoltaics 
(p 1173-1181) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

The effects of experimental parameters on the extent of intercalation of PMMA/MMT nanocomposites prepared in solution 
(p 1182-1187) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract  

Synthesis of poly(vinyl alcohol)-graft-poly(-caprolactone) and poly(vinyl alcohol)-graft-poly(lactide) in melt with magnesium hydride as catalyst 
(p 1188-1197) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Pendent polyimides using mellitic acid dianhydride. III. The effect of pendent group functionality on polymer properties 
(p 1198-1206) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Synergistic enhancement in tensile strength and ductility of ABS by using recycled PETG plastic 
(p 1207-1215) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Synthesis and evaluation of poly(dioctyltin maleate-styrene-methyl acrylate) as a stabilizer for poly(vinyl chloride) 
(p 1216-1222) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Polymeric calcium phosphate cements incorporated with poly--glutamic acid: Comparative study of poly--glutamic acid and citric acid 
(p 1223-1231) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Influence of phenolic curative on crosslink density and other related properties of dynamically cured NR/HDPE blends
(p 1232-1240) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

In situ fast gelling formulation of methyl cellulose for in vitro ophthalmic controlled delivery of ketorolac tromethamine 
(p 1241-1246) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Effects of layered silicate structure on the mechanical properties and structures of protein-based bionanocomposites 
(p 1247-1256) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Physicomechanical and thermal properties of moldings made from liquefied wood-based novolak PF resins under various hot-pressing conditions 
(p 1257-1263) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Preparation and photocatalytic activity of zinc sulfide/polymer nanocomposites 
(p 1264-1269) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

A novel process to isolate fibrils from cellulose fibers by high-intensity ultrasonication, Part 1: Process optimization 
(p 1270-1275) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Electrokinetic properties of polypropylene-layered silicate nanocomposite fibers 
(p 1276-1281) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Melt electrospinning from poly(L-lactide) rods coated with poly(ethylene-co-vinyl alcohol) 
(p 1282-1288) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Preparation and properties of one epoxy system bearing fluorene moieties 
(p 1289-1297) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Composition, thermal properties, and biodegradability of a new biodegradable aliphatic/aromatic copolyester 
(p 1298-1306) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Suspension polymerization of poly(methyl methacrylate)/clay nanocomposites 
(p 1307-1315) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Synthesis and characterization of in situ sodium-activated and organomodified bentonite clay/styrene-butadiene rubber nanocomposites by a latex blending technique 
(p 1316-1329) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Rapid bending of a nonliquid crystal azobenzene polymer film and characteristics of surface relief grating 
(p 1330-1334) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Separation and preconcentration of some heavy-metal ions using new chelating polymeric hydrogels 
(p 1335-1344) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Experimental rapid surface heating by induction for micro-injection molding of light-guided plates 
(p 1345-1354) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Aramid-short-fiber reinforced rubber as a tire tread composite 
(p 1355-1363) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

Self-assembly and drug delivery behaviors of thermo-sensitive poly(t-butyl acrylate)-b-poly(N-isopropylacrylamide) micelles 
(p 1364-1368) Journal of Applied Polymer  Science 113 #2 (2009)
Abstract

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

08.  Journal of Cellular Plastics 45  #3 (2009)
(Titles and Abstracts) (R)

Preparation and Characterization of Expandable St/MMA Copolymers Produced by Suspension Polymerization
(197-224) Journal of Cellular Plastics 45  #3 (2009)
[Abstract]

Effects of Blend Morphology on the Foaming of Polypropylene/ Low-density Polyethylene Blends during a Batch Foaming Process
(225-241) Journal of Cellular Plastics 45  #3 (2009)
[Abstract]

Global Atmospheric Emissions Model of HCFC142b with Respect to Extruded Polystyrene Foam Applications
(243-278) Journal of Cellular Plastics 45  #3 (2009)
[Abstract]

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

09.  Journal of Polymer Science Part A: Polymer  Chemistry 47 #10 (2009)
(Titles and Abstracts) (H)

Review
Advances in liquid crystalline conjugated polymers 
(p 2463-2485) Journal of Polymer Science Part A: Polymer  Chemistry 47 #10 (2009)
Abstract

Facile and efficient preparation of phosphinate-functionalized aromatic diamines and their high-T_g polyimides 
(p 2486-2499) Journal of Polymer Science Part A: Polymer  Chemistry 47 #10 (2009)
Abstract  

Poly-(p-phenylene vinylenes) with pendent 2,4-difluorophenyl and fluorenyl moieties: Synthesis, characterization, and device performance 
(p 2500-2508) Journal of Polymer Science Part A: Polymer  Chemistry 47 #10 (2009)
Abstract

(Meth)acrylate vinyl ester hybrid polymerizations 
(p 2509-2517) Journal of Polymer Science Part A: Polymer  Chemistry 47 #10 (2009)
Abstract

Ferrocenyl-functionalized long chain branched polydienes 
(p 2518-2529) Journal of Polymer Science Part A: Polymer  Chemistry 47 #10 (2009)
Abstract

Chiral polyamides consisting of N--benzoyl-L-glutamic acid as a diacid component 
(p 2530-2538) Journal of Polymer Science Part A: Polymer  Chemistry 47 #10 (2009)
Abstract

Heterotactic-specific radical polymerization of N-isopropylacrylamide and phase transition behavior of aqueous solution of heterotactic poly(N-isopropylacrylamide)
(p 2539-2550) Journal of Polymer Science Part A: Polymer  Chemistry 47 #10 (2009)
Abstract

Carbon nanotubes decorated with terpyridine-ruthenium complexes 
(p 2551-2559) Journal of Polymer Science Part A: Polymer  Chemistry 47 #10 (2009)
Abstract

Vinyl addition polymerization of norbornene with cationic (allyl)Ni catalysts: Mechanistic insights and characterization of first insertion products 
(p 2560-2573) Journal of Polymer Science Part A: Polymer  Chemistry 47 #10 (2009)
Abstract

Incorporating glycidyl methacrylate into block copolymers using poly(methacrylate-ran-styrene) macroinitiators synthesized by nitroxide-mediated polymerization 
(p 2574-2588) Journal of Polymer Science Part A: Polymer  Chemistry 47 #10 (2009)
Abstract

Synthesis and characterization of novel PDMS nanocomposites using POSS derivatives as cross-linking filler 
(p 2589-2596) Journal of Polymer Science Part A: Polymer  Chemistry 47 #10 (2009)
Abstract

Synthesis of exact comb polybutadienes with two and three branches 
(p 2597-2607) Journal of Polymer Science Part A: Polymer  Chemistry 47 #10 (2009)
Abstract

Synthesis of amphiphilic copolymer brushes possessing alternating poly(methyl methacrylate) and poly(N-isopropylacrylamide) grafts via a combination of ATRP and click chemistry 
(p 2608-2619) Journal of Polymer Science Part A: Polymer  Chemistry 47 #10 (2009)
Abstract

An efficient synthetic route to well-defined theta-shaped copolymers 
(p 2620-2630) Journal of Polymer Science Part A: Polymer  Chemistry 47 #10 (2009)
Abstract

Control of molecular aggregation in symmetrically substituted -conjugated bulky poly(p-phenylenevinylene)s and their copolymers 
(p 2631-2646) Journal of Polymer Science Part A: Polymer  Chemistry 47 #10 (2009)
Abstract

Studies on sulfonic acid functionalized hollow silica spheres/Nafion® composite proton exchange membranes 
(p 2647-2655) Journal of Polymer Science Part A: Polymer  Chemistry 47 #10 (2009)
Abstract

Catalyst-free synthesis of polyorganosiloxanes by high temperature and pressure water. II. Understanding of the reaction process 
(p 2656-2663) Journal of Polymer Science Part A: Polymer  Chemistry 47 #10 (2009)
Abstract

(Meth)acrylate-based photoelastomers as tailored biomaterials for artificial vascular grafts 
(p 2664-2676) Journal of Polymer Science Part A: Polymer  Chemistry 47 #10 (2009)
Abstract

High quantum yield photoluminescence of new polyamides containing oligo-PPV amino derivatives and related oligomers 
(p 2677-2689) Journal of Polymer Science Part A: Polymer  Chemistry 47 #10 (2009)
Abstract

Synthesis and characterization of side-chain liquid crystalline polymers bearing cholesterol mesogen 
(p 2690-2701) Journal of Polymer Science Part A: Polymer  Chemistry 47 #10 (2009)
Abstract

Well-defined poly[(dimethylamimo)ethyl methacrylate]-b-poly(fluoroalkyl methacrylate) diblock copolymers: Effects of different fluoroalkyl groups on the solution properties 
(p 2702-2712) Journal of Polymer Science Part A: Polymer  Chemistry 47 #10 (2009)
Abstract

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

10.   Journal of Rheology 53 #3 (2009)
(Titles and Abstracts)

Soft colloidal matter: A phenomenological comparison of the aging and mechanical responses with those of molecular glasses
(489-516) Journal of Rheology 53 #3 (2009)
Abstract

Anisotropy of nonaqueous layered silicate suspensions subjected to shear flow
(517-538) Journal of Rheology 53 #3 (2009)
Abstract

Note: Method for overcoming ductile failure in Münstedt-type extensional rheometers
(539-545) Journal of Rheology 53 #3 (2009)
Abstract  

The rheology and modeling of chemically treated carbon nanotubes suspensions
(547-573) Journal of Rheology 53 #3 (2009)
Abstract

Directed self-assembly of suspensions by large amplitude oscillatory shear flow
(575-588) Journal of Rheology 53 #3 (2009)
Abstract

Dynamic defect morphology and hydrodynamics of sheared nematic polymers in two space dimensions
(589-615) Journal of Rheology 53 #3 (2009)
Abstract  

Universal scaling behavior in startup shear of entangled linear polymer melts
(617-629) Journal of Rheology 53 #3 (2009)
Abstract  

Rheological behavior of fiber-filled model suspensions: Effect of fiber flexibility
(631-650) Journal of Rheology 53 #3 (2009)
Abstract

The effect of hydrophobic and hydrophilic fumed silica on the rheology of magnetorheological suspensions
(651-662) Journal of Rheology 53 #3 (2009)
Abstract

Passive breakup of viscoelastic droplets and filament self-thinning at a microfluidic T-junction
(663-683) Journal of Rheology 53 #3 (2009)
Abstract

Using transient shear rheology to determine material parameters in fiber suspension theory
(685-705) Journal of Rheology 53 #3 (2009)
Abstract  

Viscoelasticity and shear flow of concentrated, noncrystallizing colloidal suspensions: Comparison with mode-coupling theory
(707-726) Journal of Rheology 53 #3 (2009)
Abstract  

Rheology and spatially resolved structure of cetyltrimethylammonium bromide wormlike micelles through the shear banding transition
(727-756) Journal of Rheology 53 #3 (2009)
Abstract

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

11.  Journal of Thermoplastic Composite Materials 22 #3 (2009)
(Titles and Abstracts)

Dielectric Relaxation of Curing DGEBA/mPDA System at 2.45 GHz
(249-257) Journal of Thermoplastic Composite Materials 22 #3 (2009)
[Abstract]

Influence of Sawdust on the Mechanical Properties of Vinyl Plasticized Composites
(259-272) Journal of Thermoplastic Composite Materials 22 #3 (2009)
[Abstract]

An Investigation of the Physical Properties of Extruded Glycerol- and Formamide-Plasticized Cornstarch
(273-291) Journal of Thermoplastic Composite Materials 22 #3 (2009)
[Abstract]

Short Nylon Fiber-reinforced HDPE: Melt Rheology
(293-304) Journal of Thermoplastic Composite Materials 22 #3 (2009)
 [Abstract]

Approximate Method for Buckling of Symmetric Composite Laminates under Thermal Loading
(305-320) Journal of Thermoplastic Composite Materials 22 #3 (2009)
[Abstract]

Mechanical Performances of Wood Polypropylene Composite due to Extended Moisture Immersion
Journal of Thermoplastic Composite Materials 2009 22: 321-333. [Abstract] [PDF] [References]

Optoelectrical Properties of Ferroelectric PC/Ceramic Composites
(335-348) Journal of Thermoplastic Composite Materials 22 #3 (2009)
 [Abstract]

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

12.  Macromolecular Chemistry and Physics 210 #8 (2009)
(Titles and Abstracts)

Online HPLC-NMR of PS-b-PMMA and Blends of PS and PMMA, 2 - LCCC-NMR at Critical Conditions of PMMA 
(p 605-613) Macromolecular Chemistry and Physics 210 #8 (2009)
Abstract

Synthesis and Characterization of Amphiphilic Polyethers Based on Tetrahydrofuran and Glycidol: Antibacterial Assessment 
(p 614-630) Macromolecular Chemistry and Physics 210 #8 (2009)
Abstract

Peculiar Behavior of Degenerative Chain Transfer Polymerization of a Phosphonated Methacrylate 
(p 631-639) Macromolecular Chemistry and Physics 210 #8 (2009)
Abstract

Parallel Synthesis of Polymer Libraries Using Atom Transfer Radical Polymerization (ATRP) 
(p 640-650) Macromolecular Chemistry and Physics 210 #8 (2009)
Abstract

Solution Self-Assembly of Core-Labeled Block Random-Copolymers Prepared by Ring Opening Metathesis Polymerization 
(p 651-658) Macromolecular Chemistry and Physics 210 #8 (2009)
Abstract

Luminescent and Ionochromic Polyiminofluorene with Conjugated Terpyridine Substituent Groups 
(p 659-668) Macromolecular Chemistry and Physics 210 #8 (2009)
Abstract

Preparation and Properties of Degradable Shape Memory Material Based on Partial -Cyclodextrin-Poly(-caprolactone) Inclusion Complex 
(p 669-676) Macromolecular Chemistry and Physics 210 #8 (2009)
Abstract

Surface Area Effects in Hydroxyapatite/Poly(-caprolactone) Nanocomposites 
(p 677-688) Macromolecular Chemistry and Physics 210 #8 (2009)
Abstract

AB₂ Functional Polyesters via Ring Opening Polymerization: Synthesis and Characterization 
(p 689-697) Macromolecular Chemistry and Physics 210 #8 (2009)
Abstract

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

13.  Macromolecular Materials and Engineering 294 #4 (2009)
(Titles and Abstracts)

Dilatometry: A Tool to Measure the Influence of Cooling Rate and Pressure on the Phase Behavior of Nucleated Polypropylene 
(p 231-243) Macromolecular Materials and Engineering 294 #4 (2009)
Abstract  

Pressure-Sensitive Chromogenic Polyesters 
(p 244-249) Macromolecular Materials and Engineering 294 #4 (2009)
Abstract

Defined Comonomer Re-Feeding During the Metallocene-Catalyzed Copolymerization of 10-Undecene-1-olate with Propene through FTIR In-Line Monitoring 
(p 250-255) Macromolecular Materials and Engineering 294 #4 (2009)
Abstract

Thermal- and Sun-Promoted Generation of Silver Nanoparticles Embedded into Poly(vinyl alcohol) Films 
(p 256-264) Macromolecular Materials and Engineering 294 #4 (2009)
Abstract

Polymeric Nanosprings by Bicomponent Electrospinning 
(p 265-271) Macromolecular Materials and Engineering 294 #4 (2009)
Abstract

Correlation of Sequence Block Lengths and Degree of Randomness with Melt Rheological Properties in PET/PEN Blends 
(p 272-280) Macromolecular Materials and Engineering 294 #4 (2009)
Abstract

Visualisation of Nanoclay Dispersion in Polymer Matrix by High-Resolution Electron Microscopy Combined with Electron Tomography 
(p 281-286) Macromolecular Materials and Engineering 294 #4 (2009)
Abstract  

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

14.  Macromolecular Theory and Simulations 18 #3 (2009)
(Titles and Abstracts)

Highly Conductive Carbon Nanotube/Polymer Nanocomposites Achievable? 
(p 155-161) Macromolecular Theory and Simulations 18 #3 (2009)
Abstract

Numerical Self-Consistent Field Theory of Cylindrical Polyelectrolyte Brushes 
(p 162-170) Macromolecular Theory and Simulations 18 #3 (2009)
Abstract

Sol MWD During Styrene, Vinyl Acetate, Methyl Methacrylate, and Butyl Acrylate Homopolymerization: A Numerical Study Using the NFT Approach 
(p 171-194) Macromolecular Theory and Simulations 18 #3 (2009)
Abstract  

New Approach in Modeling of Metallocene-Catalyzed Olefin Polymerization Using Artificial Neural Networks 
(p 195-200) Macromolecular Theory and Simulations 18 #3 (2009)
Abstract

Simulation of Agglomerate Dispersion in Cubic Cavity Flow 
(p 201-208) Macromolecular Theory and Simulations 18 #3 (2009)
Abstract  

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

15.  Macromolecules 42 #8 (2009)
(Titles and Abstracts)

Poly(γ-benzyl-l-glutamate) Peptides Confined to Nanoporous Alumina: Pore Diameter Dependence of Self-Assembly and Segmental Dynamics
(2881–2885) Macromolecules 42 #8 (2009)

Direct Observation and Modeling of Transient Nucleation in Isothermal Thickening of Polymer Lamellar Crystal Monolayers
(2886–2890) Macromolecules 42 #8 (2009)

Functionalized Hyperbranched Polymers via Olefin Metathesis
(2895–2898) Macromolecules 42 #8 (2009)

Synthesis of Organic/Inorganic Hybrid Quatrefoil-Shaped Star-Cyclic Polymer Containing a Polyhedral Oligomeric Silsesquioxane Core
(2903–2910) Macromolecules 42 #8 (2009)

Effective Recognition on the Surface of a Polymer Prepared by Molecular Imprinting Using Ionic Complex
(2911–2915) Macromolecules 42 #8 (2009)

Synthesis and Self-Assembly of Coil−Rod Double Hydrophilic Diblock Copolymer with Dually Responsive Asymmetric Centipede-Shaped Polymer Brush as the Rod Segment
(2916–2924) Macromolecules 42 #8 (2009)

Luminescent m-Carborane-Based π-Conjugated Polymer
(2925–2930) Macromolecules 42 #8 (2009)

pH-Detachable Polymer Brushes Formed Using Titanium−Diol Coordination Chemistry and Living Radical Polymerization (RAFT)
(2931–2939) Macromolecules 42 #8 (2009)

Preparation of Tadpole-Shaped Amphiphilic Cyclic PS-b-linear PEO via ATRP and Click Chemistry
(2940–2948) Macromolecules 42 #8 (2009)

Iron(III)-Mediated Atom Transfer Radical Polymerization in the Absence of Any Additives
(2949–2957) Macromolecules 42 #8 (2009)

Tuning Nanostructure Morphology and Gold Nanoparticle “Locking” of Multi-Responsive Amphiphilic Diblock Copolymers† †
(2958–2964) Macromolecules 42 #8 (2009)

Lower Critical Solution Temperature Behavior of Comb and Graft Shaped Poly[oligo(2-ethyl-2-oxazoline)methacrylate]s
(2965–2971) Macromolecules 42 #8 (2009)

Semisegmented Amphiphilic Polymer Conetworks: Synthesis and Characterization
(2972–2980) Macromolecules 42 #8 (2009)

Electropolymerizable 2,2′-Carboranyldithiophenes. Structure−Property Investigations of the Corresponding Conducting Polymer Films by Electrochemistry, UV−Visible Spectroscopy and Conducting Probe Atomic Force Microscopy
(2981–2987) Macromolecules 42 #8 (2009)

Synthesis of Organoboron Quinoline-8-thiolate and Quinoline-8-selenolate Complexes and Their Incorporation into the π-Conjugated Polymer Main-Chain
(2988–2993) Macromolecules 42 #8 (2009)

Effects of Monomer Functionality and Hydrogen Bonding on the Polymerization Kinetics and Properties of Thiol−Ene Networks
(2994–2999) Macromolecules 42 #8 (2009)

Proton-Conducting Polymers via Free Radical Polymerization of Diisopropyl-p-vinylbenzyl Phosphonate and 1-Vinylimidazole
(3000–3004) Macromolecules 42 #8 (2009)

Py−GC/MS and MALDI−TOF/TOF CID Study of Polysulfone Fragmentation Reactions
(3005–3013) Macromolecules 42 #8 (2009)

Triazole-Based Leaving Group for RAFT-Mediated Polymerization Synthesized via the Cu-Mediated Huisgen 1,3-Dipolar Cycloaddition Reaction
(3014–3018) Macromolecules 42 #8 (2009)

Mechanistic Studies on Template Polymerization in Porous Isotactic Poly(methyl methacrylate) Thin Films by Radical Polymerization and Postpolymerization of Methacrylate Derivatives
(3019–3025) Macromolecules 42 #8 (2009)

Tunable Thermosensitivity of Biodegradable Polymer Micelles of Poly(ε-caprolactone) and Polyphosphoester Block Copolymers
(3026–3032) Macromolecules 42 #8 (2009)

DFT Study on the Propagation Kinetics of Free-Radical Polymerization of α-Substituted Acrylates
(3033–3041) Macromolecules 42 #8 (2009)

Columnar Stacks of Star- and Tadpole-Shaped Polyoxazolines Having Triphenylene Moiety and Their Applications for Synthesis of Wire-Assembled Gold Nanoparticles
(3042–3047) Macromolecules 42 #8 (2009)

Synthesis and Characterization of Isotactic 1,2-Poly(E-3-methyl-1,3-pentadiene). Some Remarks about the Influence of Monomer Structure on Polymerization Stereoselectivity
(3048–3056) Macromolecules 42 #8 (2009)

Cyanobacteria That Produce Megamolecules with Efficient Self-Orientations
(3057–3062) Macromolecules 42 #8 (2009)

Phase Behavior and Dimensional Scaling of Symmetric Block Copolymer−Homopolymer Ternary Blends in Thin Films
(3063–3072) Macromolecules 42 #8 (2009)

Stereoregular Diblock Copolymers of Syndiotactic Polypropylene and Polyesters: Syntheses and Self-Assembled Nanostructures
(3073–3085 Macromolecules 42 #8 (2009)

Controlled Ring-Opening Polymerization of -Caprolactone Using Polymer-Supported Scandium Trifluoromethanesulfonate in Organic Solvent and Ionic Liquids
(3086–3091) Macromolecules 42 #8 (2009)

Synthesis and Fluorescent Properties of Difluoroboron Dibenzoylmethane Polycaprolactone
(3092–3097) Macromolecules 42 #8 (2009)

Role of Solvent Trapping Effects in Determining the Structure and Morphology of Ternary Blend Organic Devices
(3098–3103) Macromolecules 42 #8 (2009)

Triphenylamine−Fluorene Alternating Conjugated Copolymers with Pendant Acceptor Groups: Synthesis, Structure−Property Relationship, and Photovoltaic Application
(3104–3111) Macromolecules 42 #8 (2009)

Multifunctional Hydrophilic Poly(vinylidene fluoride) Graft Copolymer with Supertoughness and Supergluing Properties
(3112–3120) Macromolecules 42 #8 (2009)

Melt Dynamics of Blended Poly(oxyethylene) Chains and Rings
(3121–3128) Macromolecules 42 #8 (2009)

Highly Sulfonated Poly(phenylene sulfone): Preparation and Stability Issues
(3129–3137) Macromolecules 42 #8 (2009)

Ordered Microphase Separation in Thin Films of PMMA−PBA Synthesized by RAFT: Effect of Block Polydispersity
(3138–3146) Macromolecules 42 #8 (2009)

End Groups Adjusting the Molecular Nano-Assembly Pattern and Thermal Gelation of Polypeptide Block Copolymer Aqueous Solution
(3147–3151) Macromolecules 42 #8 (2009)

Electrophoretic Behavior of Anionic Triazine and PAMAM Dendrimers: Methods for Improving Resolution and Assessing Purity Using Capillary Electrophoresis
(3152–3161) Macromolecules 42 #8 (2009)

Difluoroboron Dibenzoylmethane PCL-PLA Block Copolymers: Matrix Effects on Room Temperature Phosphorescence
(3162–3169) Macromolecules 42 #8 (2009)

Linear and Nonlinear Elastic Behaviors of Star Polymers
(3170–3178) Macromolecules 42 #8 (2009)

Difference in Steady Shear Flow Viscosity between Polar and Nonpolar Nematic Liquid Crystals in Aromatic Polyesters Derived from VECTRA
(3179–3185) Macromolecules 42 #8 (2009)

Interfacial Structure and Dynamics of Siloxane Systems: PDMS−Vapor and PDMS−Water
(3186–3194) Macromolecules 42 #8 (2009)

Shape Transformations of Membrane Vesicles from Amphiphilic Triblock Copolymers: A Dissipative Particle Dynamics Simulation Study
(3195–3200) Macromolecules 42 #8 (2009)

Dielectric Spectroscopy Investigation of Relaxation in C60−Polyisoprene Nanocomposites
(3201–3206) Macromolecules 42 #8 (2009)

Preparation of Head-to-Head Type Substituted Polyacetylenes by Organometallic Polycondensation
(3207–3210) Macromolecules 42 #8 (2009)

Stick-Release Pattern in Stretching Single Condensed Polyelectrolyte Toroids
(3211–3214) Macromolecules 42 #8 (2009)

Origin of Carbon Nanotubes Induced Poly(l-Lactide) Crystallization: Surface Induced Conformational Order
(3215–3218) Macromolecules 42 #8 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

16.  Microporous and Mesoporous Materials 122. #1-3 (2009)
(Titles and Abstracts) (R)

Synthesis of C,N,S-tridoped mesoporous titania with enhanced visible light-induced photocatalytic activity
(1-6) Microporous and Mesoporous Materials 122. #1-3 (2009)

Clay-catalyzed phenomena of cationic-dye aggregation and hydroxo-chromium oligomerization
(13-19) Microporous and Mesoporous Materials 122. #1-3 (2009)

Removal of cationic dyes by kaolinite
(20-27) Microporous and Mesoporous Materials 122. #1-3 (2009)

Adsorption behavior of arsenic onto protonated titanate nanotubes prepared via hydrothermal method
(28-35) Microporous and Mesoporous Materials 122. #1-3 (2009)

Catalytic benzene hydroxylation over copper-substituted aluminophosphate molecular sieves (CuAPO-11)
(36-41) Microporous and Mesoporous Materials 122. #1-3 (2009)

Template-free hydrothermal fabrication of hierarchically organized γ-AlOOH hollow microspheres
(42-47) Microporous and Mesoporous Materials 122. #1-3 (2009)

Mo-functionalized MCF meso-material and its catalytic performance for epoxidation of propylene by cumene hydroperoxide
(55-60) Microporous and Mesoporous Materials 122. #1-3 (2009)

Heptane adsorption in silicalite-1: Molecular dynamics simulation
(61-71) Microporous and Mesoporous Materials 122. #1-3 (2009)

Optimizing the sol–gel parameters on the synthesis of mesostructure nanocrystalline γ-Al₂O₃
(72-78) Microporous and Mesoporous Materials 122. #1-3 (2009)

In-situ preparation of supported precious metal and metal oxide nanoparticles by nanoreactor flash pyrolysis
(79-86) Microporous and Mesoporous Materials 122. #1-3 (2009)

Pore size control for mesoporous titanium hydroxide prepared with mixed template molecules and its fluoride ion exchange property
(87-92) Microporous and Mesoporous Materials 122. #1-3 (2009)

New highly porous aluminium based metal-organic frameworks: Al(OH)(ndc) (ndc = 2,6-naphthalene dicarboxylate) and Al(OH)(bpdc) (bpdc = 4,4′-biphenyl dicarboxylate)
(93-98) Microporous and Mesoporous Materials 122. #1-3 (2009)

Zeta potential study of thermally treated dolomite samples in electrolyte solutions
(99-104) Microporous and Mesoporous Materials 122. #1-3 (2009)

Dependence of ²⁹Si NMR chemical shielding properties of precursor silicate species, Q⁰ on its local structure at the pre-nucleation stages of zeolite synthesis – A DFT based computational correlation
(105-113) Microporous and Mesoporous Materials 122. #1-3 (2009)

Monodispersed MCM-41 large particles by modified pseudomorphic transformation: Direct diamine functionalization and application in protein bioseparation
(114-120) Microporous and Mesoporous Materials 122. #1-3 (2009)

Correlation between deuterium NMR spectral components and MCM-41 pore surface hydration sites
(121-127) Microporous and Mesoporous Materials 122. #1-3 (2009)

12-Tungstophosphoric heteropolyacid supported on modified SBA-15 as catalyst in HDS of thiophene
(128-134) Microporous and Mesoporous Materials 122. #1-3 (2009)

Influence of post-synthesis treatment on BEA zeolites hydrophobicity assessed under static and dynamic conditions
(135-142) Microporous and Mesoporous Materials 122. #1-3 (2009)

Adsorption of fermentation inhibitors from lignocellulosic biomass hydrolyzates for improved ethanol yield and value-added product recovery
(143-148) Microporous and Mesoporous Materials 122. #1-3 (2009)

Synthesis of LEV zeolite by interzeolite conversion method and its catalytic performance in ethanol to olefins reaction
(149-154) Microporous and Mesoporous Materials 122. #1-3 (2009)

Synthesis of carbon nanotubes on carbon fabric for use as electrochemical capacitor
(155-159) Microporous and Mesoporous Materials 122. #1-3 (2009)

Influences of synthesis conditions and mesoporous structures on the gold nanoparticles supported on mesoporous silica hosts
(160-167) Microporous and Mesoporous Materials 122. #1-3 (2009)

Effect of nonsurfactant template content on the particle size and surface area of monodisperse mesoporous silica nanospheres
(168-174) Microporous and Mesoporous Materials 122. #1-3 (2009)

Preparation of high-surface area activated carbons from Paulownia wood by ZnCl₂ activation
(189-194) Microporous and Mesoporous Materials 122. #1-3 (2009)

Titanosilicate ETS-10 derived from rice husk ash
(195-200) Microporous and Mesoporous Materials 122. #1-3 (2009)

Mesostructured silica based delivery system for a drug with a peptide as a cell-penetrating vector
(201-207) Microporous and Mesoporous Materials 122. #1-3 (2009)