Articles by Journal

Hit Counter

Home

Copyright 2009 by Roger D. Corneliussen

Below are links to the new articles by  journals.  A click should take you to the journal website.  This is a great variation in where one ends up.  In some cases, a click will take you to the issue in other cases a click will take you to the website and you must do a few more clicks to get to the issue.  This is controlled by the publisher and not Maro.  Fortunately, with a little practice, this should not be a serious problem.  (RDC)

Polymer Track (News)
Updated daily

Week 38 (9/14-8/18) 2009

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

01.  AIChE Journal 55 #10 (2008)
(Titles and Abstracts) (T)

Viscocapillary model of slide coating: Effect of operating parameters and range of validity 
(p 2491-2505)
AIChE Journal 55 #10 (2008)
Abstract

Application of direct fluid flow oscillations to improve mixing in microbioreactors 
(p 2725-2736)
AIChE Journal 55 #10 (2008)
Abstract

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

02.  Chemical Engineering Progress 105 #9 (2009)
(Titles and Abstracts) (T)
Trade Journal

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

03.  Chemical Reviews 109 #9 (2009)
(Titles and Abstracts)

Thermochemistry of Microporous and Mesoporous Materials
(3885–3902)
Chemical Reviews 109 #9 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

04.  Chemical Week 
Titles and Abstracts) Weekly (H)
Trade Journal

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

05.  Combustion Science and Technology 181 #9 (2009)
(Titles and Abstracts) S

No articles selected

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

06.   e-Polymers (9/14/2009) (107)
(Titles, Abstracts and Articles)

104[2009]  Effects of feed rate and solution conductivity on jet current and fiber diameter in electrospinning of polyacrylonitrile solutions
 e-Polymers (9/14/2009) (107)
[Abstract]

105[2009]  Graft copolymerization of acrylonitrile onto Saccharum cilliari fiber
 e-Polymers (9/14/2009) (107)
[Abstract]

106[2009]  PA6/NBR blends: iprovement of processability and mechanical properties
 e-Polymers (9/14/2009) (107)
[Abstract]

107[2009]  Synthesis of monodisperse poly(styrene-co-divinylbenzene) microspheres by precipitation polymerization in acetonitrile and n-butanol mixture
 e-Polymers (9/14/2009) (107)
[Abstract]

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

07.  Geotextiles and Geomembranes 27  #5 (2009)
(Titles and Abstracts)

Performance-based indicators for controlling geosynthetic clay liners in landfill applications
(321-331)
 Geotextiles and Geomembranes 27  #5 (2009)

Effect of randomly distributed geofibers on the piping behaviour of embankments constructed with fly ash as a fill material
(341-349)
 Geotextiles and Geomembranes 27  #5 (2009)

Soil–geosynthetic interaction: Modelling and analysis
(368-390)
 Geotextiles and Geomembranes 27  #5 (2009)

Unconfined compressive strength of fly ash reinforced with jute geotextiles
(391-398)
 Geotextiles and Geomembranes 27  #5 (2009)

A comprehensive method for analyzing the effect of geotextile layers on embankment stability
(399-405)
 Geotextiles and Geomembranes 27  #5 (2009)

Field observation of GCL shrinkage at a site in Melbourne Australia
(406-408)
 Geotextiles and Geomembranes 27  #5 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

08.  Industrial & Engineering Chemistry Research 48 #18 (2009)
(Titles and Abstracts) (T)

Polypropylene and Ethylene−Propylene Copolymer Reactor Alloys Prepared by Metallocene/Ziegler−Natta Hybrid Catalyst
(8349–8355)  
Industrial & Engineering Chemistry Research 48 #18 (2009)

Age-Induced Changes in the Microstructure and Selected Properties of Extruded Starch Films Plasticized with Glycerol and Stearic Acid
(8457–8463)  
Industrial & Engineering Chemistry Research 48 #18 (2009)

Influence of Bitumen Colloidal Nature on the Design of Isocyanate-Based Bituminous Products with Enhanced Rheological Properties
(8464–8470)  
Industrial & Engineering Chemistry Research 48 #18 (2009)

Effect of Surface Treatment on Titania-Modified PET Fiber Using Polyethylene Nanoparticles
(8487–8492)  
Industrial & Engineering Chemistry Research 48 #18 (2009)

Fuzzy Model-Based Predictive Hybrid Control of Polymerization Processes
(8542–8550)  
Industrial & Engineering Chemistry Research 48 #18 (2009)

Simulation of Flash Separation in Polyethylene Industrial Processing: Comparison of SRK and SL Equations of State
(8613–8628)  
Industrial & Engineering Chemistry Research 48 #18 (2009)

Behavior of Inorganic Nanoparticles in Silver Polymer Electrolytes and Their Effects on Silver Ion Activity for Facilitated Olefin Transport
(8650–8654)  
Industrial & Engineering Chemistry Research 48 #18 (2009)

Enhancement of Gas Selectivities of Hexafluoroisopropylidene-Based Polyimides with Poly(Methylmethacrylate) Blending
(8663–8669)  
Industrial & Engineering Chemistry Research 48 #18 (2009)

Valorization of Waste Agricultural Polyethylene Film by Sequential Pyrolysis and Catalytic Reforming
(8697–8703)  
Industrial & Engineering Chemistry Research 48 #18 (2009)

Online Measurement of Fiber Diameter and Temperature in the Melt-Spinning and Melt-Blowing Processes
(8736–8744)  
Industrial & Engineering Chemistry Research 48 #18 (2009)

Diol-Functionalized Imidazolium-Based Room-Temperature Ionic Liquids with Bis(trifluoromethanesulfonimide) Anions that Exhibit Variable Water Miscibility
(8757–8759)  
Industrial & Engineering Chemistry Research 48 #18 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

09.  Journal of Applied Polymer  Science 114 #6 (2009)
(Titles and Abstracts) (H) 

Preparation of a crosslinked polyelectrolyte membrane for fuel cells with an allyl methacrylate based two-step reaction 
(p 3343-3350)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Synthesis and characterization of novel fluorine-containing methacrylate copolymers: Reactivity ratios, thermal properties, and antimicrobial activity 
(p 3351-3359)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Studies on structure property correlation of cross-linked glycidyl azide polymer 
(p 3360-3368)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Preparation and characterization of CMCS/PVA blend membranes and its sorption and pervaporation performance (I) 
(p 3369-3378)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Thermomechanical and optical properties of biodegradable poly(L-lactide)/silica nanocomposites by melt compounding 
(p 3379-3388)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Effects of prior aging at 288°C in argon environment on time-dependent deformation behavior of a thermoset polymer at elevated temperature, Part 2: Modeling with viscoplasticity theory based on overstress 
(p 3389-3395)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Preparation and in vitro degradation of novel bioactive polylactide/wollastonite scaffolds 
(p 3396-3406)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract  

Mechanical and thermal properties of functionalized multiwalled carbon nanotubes and multiwalled carbon nanotube-polyurethane composites 
(p 3407-3413)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Facile way to disperse single-walled carbon nanotubes using a noncovalent method and their reinforcing effect in poly(methyl methacrylate) composites 
(p 3414-3419)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Synthetic paper from plastic waste: Influence of a surface treatment with corona discharge 
(p 3420-3427)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Effects of superfine silk protein powders on mechanical properties of wet-spun polyurethane fibers 
(p 3428-3433)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Microwave absorbing properties of ternary linear low-density polyethylene/carbonyl iron powder/carbon black composites 
(p 3434-3439)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Incorporation of triclosan into polydioxanone monofilaments and evaluation of the corresponding release 
(p 3440-3451)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract  

Effect of ceramic nanoadditive content and type on the rheological properties of poly(vinyl alcohol) spinning solutions 
(p 3452-3457)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Synthesis and characterization of novel organosoluble polyesters based on a DIOL with azaquinoxaline ring 
(p 3458-3463)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Synthesis and characterization of novel photoactive polyamide derived from substituted fluorene by copper (I) catalyst 
(p 3464-3471)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Preparation of liquid-filled micelles based on an amphiphilic triblock copolymer 
(p 3472-3478)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Generation of polymer ultrafine fibers through solution (air-) blowing 
(p 3479-3486)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Preparation of poly(vinyl amine)-grafted crosslinked poly(vinyl alcohol) microspheres 
(p 3487-3494)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Influence of polyacrylate/titanium dioxide composite particles on the antiaging performance of polycarbonates 
(p 3495-3500)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Natural rubber/poly(acrylic acid) semi-interpenetrating polymer network membranes for the pervaporation of water-ethanol mixtures 
(p 3501-3509)

Abstract

Electromagnetic properties and mechanical properties of Ni0.8Zn0.2Fe2O4/polyolefin elastomer composites for high-frequency applications 
(p 3510-3514)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Influence of the spinning conditions on the structure and properties of polyamide 12/carbon nanotube composite fibers 
(p 3515-3523)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Needleless electrospinning. I. A comparison of cylinder and disk nozzles 
(p 3524-3530)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract  

Large-scale synthesis of polyaniline nanofibers based on renewable resource molecular template 
(p 3531-3541)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Antipolyelectrolyte superabsorbing nanocomposites: Synthesis and properties 
(p 3542-3547)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Evaluation of water sorption behavior and in vitro blood compatibility of polyvinyl alcohol based magnetic bionanocomposites 
(p 3548-3560)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract  

Hydrolysis reaction of poly(ethylene terephthalate) using ionic liquids as solvent and catalyst 
(p 3561-3565)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Silicone-based cholesteric liquid crystalline polymers: Effect of crosslinking agent on phase transition behavior 
(p 3566-3573)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Biodegradation of blends of polyethylene-octene elastomer with starches by fungi 
(p 3574-3584)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Cardanol-based novolac resins as curing agents of epoxy resins 
(p 3585-3591)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Influence of hybridization of glass fiber and talc on the mechanical performance of polypropylene composites 
(p 3592-3601)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Role of PLLA plasma surface modification in the interaction with human marrow stromal cells 
(p 3602-3611)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract  

Improved mechanical properties and structure of polypropylene pipe prepared under vibration force field 
(p 3612-3620)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Investigation the jet stretch in PAN fiber dry-jet wet spinning for PAN-DMSO-H2O system 
(p 3621-3625)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract  

A novel intumescent flame-retardant system for flame-retarded LLDPE/EVA composites 
(p 3626-3635)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Bingham characteristics of polymer-based electrorheological fluids with different electrode gaps and materials 
(p 3636-3644)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Plasticizer effect of dibutyl phthalate on the morphology and mechanical properties of hard elastic poly(vinylidene fluoride) fibers 
(p 3645-3651)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract  

Multifunctionality of layered fabric systems based on electrospun polyurethane/zinc oxide nanocomposite fibers 
(p 3652-3658)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Synthesis and characterization of poly(dimethylsiloxane-urethane) nanocomposites: Effect of (in)completely condensed silsesquioxanes on thermal, morphological, and mechanical properties 
(p 3659-3667)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Thermal-shrinkage investigation of the chemical reaction during the stabilization of polyacrylonitrile fibers 
(p 3668-3672)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Modeling and simulation of photofabrication processes using unsaturated polyester resins 
(p 3673-3685)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Microspheres of calcium carbonate composite regulated by sodium polyacrylates with various ways 
(p 3686-3692)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Evaluating fouling-resistance and fouling-release performance of smart polyurethane surfaces: An outlook for efficient and environmentally benign marine coatings 
(p 3693-3703)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Impact resistant polymeric glasses using compressive pre-stress 
(p 3704-3715)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Covalent immobilization of alpha-amylase onto UV-curable coating 
(p 3716-3722)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract  

Carbohydrate-based poly(ester-urethane)s: A comparative study regarding cyclic alditols extenders and polymerization procedures 
(p 3723-3736)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Study on morphology and viscoelastic properties of PP/PET/SEBS ternary blend and their fibers 
(p 3737-3743)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

A novel nonviral gene delivery vector: Low-molecular-weight polyethylenimine-graft-ovalbumin 
(p 3744-3750)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Influence of PP-g-MA on morphology, mechanical properties and deformation mechanism of copolypropylene/clay nanocomposite 
(p 3751-3759)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Suppression of breast cancer cells in vitro by polyamidoamine-dendrimer-mediated 5-fluorouracil chemotherapy combined with antisense micro-RNA 21 gene therapy 
(p 3760-3766)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Properties of isocyanate-reactive waterborne polyurethane adhesives: Effect of cure reaction with various polyol and chain extender content 
(p 3767-3773)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Tensile testing of individual ultrathin electrospun poly(L-lactic acid) fibers 
(p 3774-3779)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract  

Empirical models for end-use properties prediction: Application to injection molding of some polyethylene resins 
(p 3780-3792)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Adsorptive removal of uranium from water by sulfonated phenol-formaldehyde resin 
(p 3793-3801)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract  

A thermal and rheological investigation during the complex cure of a two-component thermoset polyurethane 
(p 3802-3810)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

The effects on the properties of PET bottles of changes to bottle-base geometry 
(p 3811-3818)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Stress-strain curve modeling and length effect of polymer concrete subjected to flexural compressive stress 
(p 3819-3826)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract  

Polyethylene-collagen hydrolizate thermoplastic blends: Thermal and mechanical properties 
(p 3827-3834)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Antimicrobial polyethylene terephthalate (PET) treated with an aromatic N-halamine precursor, m-aramid 
(p 3835-3840)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

A new methodology in the study of PVAc-based adhesive formulations 
(p 3841-3854)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Facile route to hierarchical conducting polymer nanostructure: Synthesis of layered polypyrrole network plates 
(p 3855-3862)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Preparation and characterization of colloidal carbon sphere/rigid polyurethane foam composites 
(p 3863-3869)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Electrospinning of poly(dimethyl siloxane) by sol-gel method 
(p 3870-3874)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Miniemulsions using static mixers: A feasibility study using simple in-line static mixers 
(p 3875-3881)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Equilibrium of benzidine inclusion adsorption on cyclodextrin copolymer 
(p 3882-3888)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Synthesis, characterization, and properties of a novel epoxy resin containing both binaphthyl and biphenyl moieties 
(p 3889-3895)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Modification of kappa-carrageenan by graft copolymerization of methacrylic acid: Synthesis and applications 
(p 3896-3905)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Ionomeric modification of a metallocene-based polyolefinic elastomer and its influence on the physicomechanical properties: Effects of the crystallinity and pendent chain length 
(p 3906-3914)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Synthesis of high metal-complexation linear elastomers containing sym-1,2,4,5-tetrazine rings 
(p 3915-3922)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Miscibility, crystallization, and mechanical properties of poly(3-hydroxybutyrate-co-4-hydroxybutyrate)/ poly(butylene succinate) blends 
(p 3923-3931)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Effect of Co and V complexes on polymerization of methyl methacrylate initiated by AlEt2Br-TEMPO catalyst 
(p 3932-3938)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Studies on binary copolymerization and glass transition temperatures of methyl methacrylate with ethyl methacrylate and n-butyl methacrylate 
(p 3939-3944)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Thermally stable polyureas and poly(urea-imide)s containing zinc and nickel napthtrien complexes 
(p 3945-3954)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Viscoelastic properties and characterization of inorganic particulate-filled polymer composites 
(p 3955-3960)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Application of crosslinked carboxymethyl konjac glucomannan in speciation of dissolved Fe(II) and Fe(III) in water samples 
(p 3961-3966)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract  

Dynamic mechanical, thermal, and morphological properties of silane-treated montmorillonite reinforced polycarbonate nanocomposites 
(p 3967-3975)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Effect of molecular weight of epoxidized natural rubber on shear strength of adhesives 
(p 3976-3979)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Effects of air plasma treatment on tribological properties of hybrid PTFE/Kevlar fabric composite 
(p 3980-3986)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Synthesis and characterization of soluble poly(ether imide)s containing fluorenyl cardo groups 
(p 3987-3993)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Studies on the preparation and properties of inorganic molecularly imprinted polymer (MIP) based on tetraethoxysilane and silane coupling agents 
(p 3994-3999)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Syntheses of PAM microgel surfacely covered with alkyl quaternary ammonium surfactant/Keggin-type polyoxometalate complexes 
(p 4000-4010)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Structural changes evidenced by rheology in PPgMA nanocomposites during oxidative ageing 
(p 4011-4019)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

The effect of copolymer composition on the surface properties of perfluoroalkylethyl acrylates 
(p 4020-4029)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

N2-filled hollow glass beads as novel gas carriers for microcellular polyethylene 
(p 4030-4035)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Molecularly imprinted polyethersulfone microfibers for the binding and recognition of bisphenol A 
(p 4036-4041)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Preparation of amphiphilic phenyl-polysucrose microspheres for protein adsorption 
(p 4042-4050)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Electrochemical synthesis of polypyrrole layers doped with glutamic ions 
(p 4051-4058)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Crosslinking and thermal stability of thermosets based on novolak and melamine 
(p 4059-4065)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Synthesis and mechanical properties of diimide-hydrogenated natural rubber vulcanizates 
(p 4066-4075)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Rheology and viscosity scaling of the polyelectrolyte xanthan gum 
(p 4076-4084)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

Relationship between polarity of template hydrogel and nanoporous structure replicated in sol-gel-derived silica matrix 
(p 4085-4090)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract  

Influence of organically modified nanoclay on the performance of pineapple leaf fiber-reinforced polypropylene nanocomposites 
(p 4091-4103)
Journal of Applied Polymer  Science 114 #6 (2009)
Abstract

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

10.   Journal of Bioactive and Compatible Polymers 24 #5 (2008)
(Titles and Abstracts)

Injectable Poly(ethylene glycol) Dimethacrylate-based Hydrogels with Hydroxyapatite  
(405-423)  Journal of Bioactive and Compatible Polymers 24 #5 (2008)
[Abstract]

Bilayer Hyaluronic Acid Wound Dressing to Promote Wound Healing in Diabetic Ulcer  
(424-443)  Journal of Bioactive and Compatible Polymers 24 #5 (2008)
[Abstract]

Poly(Ethylene Glycol)-based Crosslinked Networks with Potential Multidrug Resistance 1 (MDR1) Protein Inhibition Effects  
(444-456)  Journal of Bioactive and Compatible Polymers 24 #5 (2008)
[Abstract]

Posterolateral Spinal Fusion in Rabbits Using a RP-based PLGA/ TCP/Col/BMSCs-OB Biomimetic Grafting Material  
(457-472.)  Journal of Bioactive and Compatible Polymers 24 #5 (2008)
[Abstract]

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

11.  Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
(Titles and Abstracts) (H)

Development of synthetic double helical polymers and oligomers 
(p 5195-5207)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

Visibly observed photocrosslinking reaction in indolyl based pendant liquid crystalline polymers: Synthesis and optical property 
(p 5208-5220)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract  

A pi-stacked and conjugated hybrid based on poly(N-vinylcarbazole) postfunctionalized with terfluorene for stable deep-blue hole-transporting materials 
(p 5221-5229)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

Role of dispersion stabilizer with hydroxy groups in preparation of monodisperse polylactide microspheres 
(p 5230-5240)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

Controlled vinyl-type polymerization of norbornene with a Nickel(II) diphosphinoamine/methylaluminoxane catalytic system 
(p 5241-5250)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

Cationic polymerization of styrene involving ionization of the CbondCl bond in ionic liquid/SO2 mixture 
(p 5251-5257)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

Synthesis, photopolymerization, and adhesive properties of new bisphosphonic acid monomers for dental application 
(p 5258-5271)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

PVA networks grafted with PDMS branches 
(p 5272-5277)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

Polyisobutylene-based polyurethanes. III. Polyurethanes containing PIB/PTMO soft co-segments 
(p 5278-5290)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

Synthesis and white electroluminescent properties of multicomponent copolymers containing polyfluorene, oligo(phenylenevinylene), and porphyrin derivatives 
(p 5291-5303)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

High performance polymer field-effect transistors based on polythiophene derivative with conjugated side chain 
(p 5304-5312)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

A comprehensive investigation into ldquocontrolled/livingrdquo chain growth crosslinking copolymerization including a back to basics modeling 
(p 5313-5327)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

Poly(cyclohexene oxide)/clay nanocomposites by photoinitiated cationic polymerization via activated monomer mechanism 
(p 5328-5335)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

Synthesis and characterization of new low bandgap polyfluorene copolymers for bulk heterojunction solar cells 
(p 5336-5343)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

An efficient approach to synthesize polysaccharides-graft-poly(p-dioxanone) copolymers as potential drug carriers 
(p 5344-5353)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

Deep-red emissive conjugated poly(2,6-BODIPY-ethynylene)s bearing alkyl side chains 
(p 5354-5366)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

Preparation of nanocomposites by reversible addition-fragmentation chain transfer polymerization from the surface of quantum dots in miniemulsion 
(p 5367-5377)

Abstract

Near-infrared electrochromic poly(aryl ether)s based on isolated electroactive tetraphenyl-p-phenylenediamine moieties 
(p 5378-5385)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

Incorporation of poly(2-acrylamido-2-methyl-N-propanesulfonic acid) segments into block and brush copolymers by ATRP 
(p 5386-5396)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract  

Microwave-assisted graft polymerization of epsiv-caprolactone onto magnetite 
(p 5397-5404)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

Aqueous RAFT polymerization of 2-aminoethyl methacrylate to produce well-defined, primary amine functional homo- and copolymers 
(p 5405-5415)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

Photoluminescence behaviors of organic soluble DNA bearing carbazole and pyrene derivatives as side-chain substituents and effect of the copolymer structure on the Förster energy transfer process 
(p 5416-5425)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

Synthesis, characterization, and photoresponsive behavior of new azobenzene-containing polyethers 
(p 5426-5436)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

Michael addition for crosslinking of poly(caprolactone)s 
(p 5437-5447)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

Synthesis of gradient copolymers with complexing groups by RAFT polymerization and their solubility in supercritical CO2 
(p 5448-5460)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

Ionomers for proton exchange membrane fuel cells by sulfonation of novel dendritic multiblock copoly(ether-sulfone)s 
(p 5461-5473)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

Photopolymerization of vinyl ether networks using an iodonium initiator - The role of photosensitizers 
(p 5474-5487)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

Synthesis and optoelectronic properties of alternating benzofuran/terfluorene copolymer with stable blue emission 
(p 5488-5497)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

Low bandgap pi-conjugated copolymers based on fused thiophenes and benzothiadiazole: Synthesis and structure-property relationship study 
(p 5498-5508)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

Y-shaped diblock copolymer with epoxy-based block of poly(glycidyl methacrylate): Synthesis, characterization, and its morphology study 
(p 5509-5526)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

Cylindrical molecular brushes with a loose grafting density 
(p 5527-5533)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

Selective 17-beta-estradiol molecular imprinting 
(p 5534-5542)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

Biocompatible and degradable nanogels via oxidation reactions of synthetic thiomers in inverse miniemulsion 
(p 5543-5549)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

Synthesis of glyco-microspheres via a thiol-ene coupling reaction 
(p 5550-5556)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

Facile syntheses of cylindrical molecular brushes by a sequential RAFT and ROMP ldquografting-throughrdquo methodology 
(p 5557-5563)
 Journal of Polymer Science Part A: Polymer  Chemistry 47 #20 (2009)
Abstract

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

12.  Journal of Rheology 53 #5 (2009)
(Titles and Abstracts)

Structural analysis of non-aqueous layered silicate suspensions subjected to shear flow
(1025-1048) Journal of Rheology 53 #5 (2009)
Abstract   

Obtaining reliable transient rheological data on concentrated short fiber suspensions using a rotational rheometer
(1049-1068) Journal of Rheology 53 #5 (2009)
Abstract  

Concentration dependence of the longest relaxation times of dilute and semi-dilute polymer solutions
(1069-1085) Journal of Rheology 53 #5 (2009)
Abstract   

Rheology of worm-like micelles composed of tri-block copolymer in the limit of slow dynamics
(1087-1100) Journal of Rheology 53 #5 (2009)

Rheological, morphological and structural properties of PE/PA/nanoclay ternary blends: Effect of clay weight fraction
(1101-1119) Journal of Rheology 53 #5 (2009)

Interface slippage study between polyamide 12 and ethylene butene copolymer melt in capillary extrusion
(1121-1132) Journal of Rheology 53 #5 (2009)
Abstract

Nonlinear rheology of model comb polymers
(1133-1153) Journal of Rheology 53 #5 (2009)
Abstract  

Injection of a viscoplastic material inside a tube or between two parallel disks: Conditions for wall detachment of the advancing front
(1155-1191) Journal of Rheology 53 #5 (2009)
Abstract

The nonlinear response of entangled star polymers to startup of shear flow
(1193-1214) Journal of Rheology 53 #5 (2009)
Abstract

Viscoelastic properties and gelation of an elastin-like polypeptide
(1215-1228) Journal of Rheology 53 #5 (2009)
Abstract

Real-time depth sectioning: Isolating the effect of stress on structure development in pressure-driven flow
(1229-1254) Journal of Rheology 53 #5 (2009)
Abstract  

Nonlinearity in large amplitude oscillatory shear (LAOS) of different viscoelastic materials
(1255-1274) Journal of Rheology 53 #5 (2009)
Abstract

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

13.  Macromolecular Rapid Communications 30 #18 (2009)
(Titles and Abstracts)

Supramolecular Self-Assembly of Nonlinear Amphiphilic and Double Hydrophilic Block Copolymers in Aqueous Solutions 
(p 1523-1532)
Macromolecular Rapid Communications 30 #18 (2009)
Abstract

A Triphenylamine-Based Conjugated Polymer with Donor-pi-Acceptor Architecture as Organic Sensitizer for Dye-Sensitized Solar Cells 
(p 1533-1537)
Macromolecular Rapid Communications 30 #18 (2009)
Abstract

Layer-by-Layer Assembled Nanotubes as Biomimetic Nanoreactors for Calcium Carbonate Deposition 
(p 1538-1542)
Macromolecular Rapid Communications 30 #18 (2009)
Abstract

Discriminating Among Co-monomer Sequence Distributions in Random Copolymers Using Interaction Chromatography 
(p 1543-1548)
Macromolecular Rapid Communications 30 #18 (2009)
Abstract

Substrate-Induced Controllable Wrinkling for Facile Nanofabrication 
(p 1549-1553)
Macromolecular Rapid Communications 30 #18 (2009)
Abstract  

Polymerizable Ionic Liquid Crystals 
(p 1554-1558)
Macromolecular Rapid Communications 30 #18 (2009)
Abstract

Amphiphilic Hybrid pi-Conjugated Polymers Containing Polyhedral Oligomeric Silsesquioxanes (p 1559-1563)
Abstract

Reactive Hydrogel Networks for the Fabrication of Metal-Polymer Nanocomposites 
(p 1564-1569)
Macromolecular Rapid Communications 30 #18 (2009)
Abstract

Cross-Linked Conjugated Polymers for Achieving Patterned Three-Color and Blue Polymer Light-Emitting Diodes with Multi-Layer Structures 
(p 1570-1576)
Macromolecular Rapid Communications 30 #18 (2009)
Abstract

A Novel Strategy for the Synthesis of Sheet-Like Polyaniline 
(p 1577-1582)
Macromolecular Rapid Communications 30 #18 (2009)
Abstract

Preparation of Ag-Embedded Polystyrene Nanospheres and Nanocapsules by Miniemulsion Polymerization 
(p 1583-1588)
Macromolecular Rapid Communications 30 #18 (2009)
Abstract

Thinner is Better: An Ultrathin Conducting Oligoaniline Film for Gas Microsensors with Ultralow Detection Limits 
(p 1589-1593)
Macromolecular Rapid Communications 30 #18 (2009)
Abstract  

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

14.  Modern Plastics (2009)
(Titles and Abstracts)  Weekly
Trade Magazine

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

15.  Nano Letters 9 #9 (2009)
(Titles and Abstracts)

Translocation of RecA-Coated Double-Stranded DNA through Solid-State Nanopores
(3089–3095)
Nano Letters 9 #9 (2009)

Lateral Buckling Mechanics in Silicon Nanowires on Elastomeric Substrates
(3214–3219)
Nano Letters 9 #9 (2009)

First-Principles Studies of the Dynamics of [2]Rotaxane Molecular Switches
(3225–3229)
Nano Letters 9 #9 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

16.  Nanotechnology 20 #40 (2009)
(Titles and Abstracts; Full PDF versions of  Articles are available free for 30 days after publication)

The fabrication of periodic polymer/silver nanoparticle structures: in situ reduction of silver nanoparticles from precursor spatially distributed in polymer using holographic exposure
#405301 Nanotechnology 20 #40 (2009)
Abstract

Coaxial nickel/poly(p-phenylene vinylene) nanowires as luminescent building blocks manipulated magnetically
# 405601 Nanotechnology 20 #40 (2009)
Abstract

High volume fraction carbon nanotube–epoxy composites
# 405702 Nanotechnology 20 #40 (2009)
Abstract

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

17.  Polymer 50 #20 (2009)
(Titles and Abstracts)  (H)

Porous microspheres of methoxy poly(ethylene glycol)-b-poly(var epsilon-caprolactone-co-d,l-lactide) prepared by a melt dispersion method
(4761-4767)
Polymer 50 #20 (2009)

PMMA–mesocellular foam silica nanocomposites prepared through batch emulsion polymerization and compression molding
(4768-4774)
Polymer 50 #20 (2009)

New synthesis and characterization of ionic polyurethane-urea liquid crystals
(4775-4780)
Polymer 50 #20 (2009)

Electrospinning zwitterion-containing nanoscale acrylic fibers
(4781-4787)
Polymer 50 #20 (2009)

Ring-opening polymerization of six-membered cyclic esters catalyzed by tetrahydroborate complexes of rare earth metals
(4788-4793)
Polymer 50 #20 (2009)

Amine groups-functionalized alcohol-soluble polyfluorene derivatives: Synthesis, photophysical properties, and self-assembly behaviors
(4794-4800)
Polymer 50 #20 (2009)

Synthesis and characterization of highly soluble 9,10-diphenyl-substituted poly(2,6-anthracenevinylene)
(4801-4806)
Polymer 50 #20 (2009)

Synthesis, characterization and fluorescence adjustment of well-defined polymethacrylates with pendant π-conjugated benzothiazole via atom transfer radical polymerization (ATRP)
(4807-4812)
Polymer 50 #20 (2009)

Synthesis and characterization of main-chain liquid crystalline copolyesters containing phosphaphenanthrene side-groups
(4813-4820)
Polymer 50 #20 (2009)

Block copolymer aggregates with photo-responsive switches: Towards a controllable supramolecular container
(4821-4828)
Polymer 50 #20 (2009)

Creation of dense polymer brush layers by the controlled deposition of an amphiphilic responsive comb polymer
(4829-4836)
Polymer 50 #20 (2009)

Interplay between nematic ordering and thermomechanical response in a side-chain liquid single crystal elastomer containing pendant azomesogen units
(4837-4844)
Polymer 50 #20 (2009)

UV, Raman and XRD study of polymorphism of poly(methyl-n-propylsilane)
(4845-4851)
Polymer 50 #20 (2009)

UV, Raman and XRD study of polymorphism of poly(methyl-n-propylsilane)
(4845-4851)
Polymer 50 #20 (2009)

Poly(ethylene glycol)s 2000–8000 in water may be planar: A small-angle neutron scattering (SANS) structure study
(4852-4858)
Polymer 50 #20 (2009)

Thermal stability of gelatin gels: Effect of preparation conditions on the activation energy barrier to melting
(4859-4867)
Polymer 50 #20 (2009)

Glass transition behavior of hyper-branched polystyrenes
(4868-4875)
Polymer 50 #20 (2009)

Influence of octakis-functionalized polyhedral oligomeric silsesquioxanes on the physical properties of their polymer nanocomposites
(4876-4887)
Polymer 50 #20 (2009)

Swelling behavior of amphiphilic gels based on hydrophobically modified dimethylaminoethyl methacrylate
(4888-4894)
Polymer 50 #20 (2009)

Toughening mechanisms in epoxy–silica nanocomposites (ESNs)
(4895-4905)
Polymer 50 #20 (2009)

Improving multifunctional behavior in structural electrolytes through copolymerization of structure- and conductivity-promoting monomers
(4906-4916)
Polymer 50 #20 (2009)

Crystalline crosslinked microparticles from immiscible blends of polyethylene and polystyrene
(4917-4925)
Polymer 50 #20 (2009)

Effect of poly(ethylene oxide) with different molecular weights on the electrospinnability of sodium alginate
(4926-4934)
Polymer 50 #20 (2009)

Scaling law on particle-to-fiber formation during electrospinning
(4935-4943)
Polymer 50 #20 (2009)

Phase behavior of poly(3-alkylthiophene)/polystyrene blends
(4944-4949)
Polymer 50 #20 (2009)

Insight into growth details and characteristics of windmill-like polyethylene crystals
(4950-4956) Polymer 50 #20 (2009)

The effects of interaction energy on the volume phase transition of N-isopropylacrylamide-co-N-isopropylmethacrylamide nano-sized gel particles: Applicability of molecular simulation technique
(4957-4963)
Polymer 50 #20 (2009)

Microstructures of lamella-forming diblock copolymer melts under nanorod-array confinements
(4964-4972) Polymer 50 #20 (2009)

Molecular dynamics simulation of miscibility in several polymer blends
(4973-4978)
Polymer 50 #20 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

18.  Polymer Composites 30 #10 (2009)
(Titles and Abstracts)

Optical, rheological, and thermal properties of hollow glass bead filled isotactic polypropylene 
(p 1371-1377)
Polymer Composites 30 #10 (2009)
Abstract

Modification of carbon nanotubes and its effect on properties of carbon nanotube/epoxy nanocomposites 
(p 1378-1387)
Polymer Composites 30 #10 (2009)
Abstract

In situ polymerization of polyethylene/clay nanocomposites using a novel clay-supported Ziegler-Natta catalyst 
(p 1388-1393)
Polymer Composites 30 #10 (2009)
Abstract

Cure kinetics and conductivity of rigid rod epoxy with polyaniline as a curing agent 
(p 1394-1400)
Polymer Composites 30 #10 (2009)
Abstract

Rheological properties of polypropylene/hemp fiber composites 
(p 1401-1407)
Polymer Composites 30 #10 (2009)
Abstract

Thermogravimetric and weathering study of novolac resin composites reinforced with mercerized bamboo fiber 
(p 1408-1416)
Polymer Composites 30 #10 (2009)
Abstract

Natural fiber hybrid composites - A comparison between compression molding and resin transfer molding 
(p 1417-1425)
Polymer Composites 30 #10 (2009)
Abstract

Rheological behavior and theoretical modeling of uniaxial elongational flow properties of polypropylene/layered silicate nanocomposites 
(p 1426-1436)
Polymer Composites 30 #10 (2009)
Abstract

Determination of mechanical properties of glass-epoxy composites in high temperatures 
(p 1437-1441)
Polymer Composites 30 #10 (2009)
Abstract  

Influence of erodent particle types on solid particle erosion of polyphenylene sulphide composite under low particle speed 
(p 1442-1449)
Polymer Composites 30 #10 (2009)
Abstract

Predicting the cure of thermosetting polymers: The isoconversion map 
(p 1450-1457)
Polymer Composites 30 #10 (2009)
Abstract

Effects of hygrothermal aging on the thermal-mechanical properties of vinylester resin and its pultruded carbon fiber composites 
(p 1458-1464)
Polymer Composites 30 #10 (2009)
Abstract  

Statistical characteristics of out-of-plane permeability for plain-woven structure 
(p 1465-1472)
Polymer Composites 30 #10 (2009)
Abstract

Polyaniline-supported platinum-hydrous ruthenium oxide nanocomposite as electrocatalyst for methanol oxidation 
(p 1473-1479)
Polymer Composites 30 #10 (2009)
Abstract

Preparation and characterization of high permittivity and low loss PTFE/CaTiO3 microwave laminates 
(p 1480-1485)
Polymer Composites 30 #10 (2009)
Abstract

Tensile properties and morphological evolution of polypropylene and poly(ethylene-co-1-octene) blends 
(p 1486-1491)
Polymer Composites 30 #10 (2009)
Abstract

Nonlinear optical properties of poly-ortho-toluidine films implantated by N+ ions with different energy 
(p 1492-1496)
Polymer Composites 30 #10 (2009)
Abstract

Experimental study of sharp-tipped projectile perforation of GFRP plates containing sand filler under high velocity impact and quasi-static loadings 
(p 1497-1509)
Polymer Composites 30 #10 (2009)
Abstract

Numerical analysis of parametric effects on consolidation of angle-bended composite laminates 
(p 1510-1516)
Polymer Composites 30 #10 (2009)
Abstract

Preparation and characterization of cellulose fiber/chitosan composites 
(p 1517-1522)
Polymer Composites 30 #10 (2009)
Abstract

The influence of plasma treatment on the tribological properties of hybrid PTFE/cotton fabric/phenolic composites 
(p 1523-1531)
Polymer Composites 30 #10 (2009)
Abstract

Development of poly(acrylamide)-hydroxyapatite composites as bone substitutes: Study of mechanical and blood compatible behavior 
(p 1532-1543)
Polymer Composites 30 #10 (2009)
Abstract

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

19.  Polymer  Engineering &  Science 49 #10 (2009)
(Titles and Abstracts)

Preparation and properties of novel phosphorus-containing binaphthyl epoxy polymer 
(p 1879-1885)
Polymer  Engineering &  Science 49 #10 (2009)
Abstract

Adhesion control for injection overmolding of polypropylene with elastomeric ethylene copolymers 
(p 1886-1893)
Polymer  Engineering &  Science 49 #10 (2009)
Abstract

Hot embossing of discrete microparts 
(p 1894-1901)
Polymer  Engineering &  Science 49 #10 (2009)
Abstract

A constitutive model for large multiaxial deformations of solid polypropylene at high temperature 
(p 1902-1908)
Polymer  Engineering &  Science 49 #10 (2009)
Abstract

Investigation on the multiwalled carbon nanotubes reinforced polyamide 6/polypropylene composites 
(p 1909-1917)
Polymer  Engineering &  Science 49 #10 (2009)
Abstract

Chitin and chitosan: Transformations due to the electrospinning process 
(p 1918-1928)
Polymer  Engineering &  Science 49 #10 (2009)
Abstract  

Influence of processing window and weight ratio on the morphology of the extruded and drawn PET/PP blends 
(p 1929-1936)
Polymer  Engineering &  Science 49 #10 (2009)
Abstract

Influence of clay and predispersion method on the structure and properties of polystyrene (PS)-clay nanocomposites 
(p 1937-1944)
Polymer  Engineering &  Science 49 #10 (2009)
Abstract

Selectivity of allylic coagent-mediated polypropylene maleation 
(p 1945-1950)
Polymer  Engineering &  Science 49 #10 (2009)
Abstract

Modeling the development of elastic anisotropy as a result of plastic flow for glassy polycarbonate 
(p 1951-1959)
Polymer  Engineering &  Science 49 #10 (2009)
Abstract

Slip effects in tapered dies 
(p 1960-1969)
Polymer  Engineering &  Science 49 #10 (2009)
Abstract

Enhanced mechanical properties of polyamide 6 fibers coated with a polyurethane thin film 
(p 1970-1978)
Polymer  Engineering &  Science 49 #10 (2009)
Abstract

Numerical investigation and experimental validation of the performance of a tubular packed bed reactor for hydrogenation of diene-based polymers 
(p 1979-1989)
Polymer  Engineering &  Science 49 #10 (2009)
Abstract

Melt processing and rheology of an acrylonitrile copolymer with absorbed carbon dioxide 
(p 1990-2004)
Polymer  Engineering &  Science 49 #10 (2009)
Abstract

Polyamide-6/high-density polyethylene blend using recycled high-density polyethylene as compatibilizer: Morphology, mechanical properties, and thermal stability 
(p 2005-2014)
Polymer  Engineering &  Science 49 #10 (2009)
Abstract

Low-loss planar optical waveguides fabricated from polycarbonate 
(p 2015-2019)
Polymer  Engineering &  Science 49 #10 (2009)
Abstract

Composites of carbon nanofibers and thermoplastic polyurethanes with shape-memory properties prepared by chaotic mixing 
(p 2020-2030)
Polymer  Engineering &  Science 49 #10 (2009)
Abstract

A real-time process optimization system for injection molding 
(p 2031-2040)
Polymer  Engineering &  Science 49 #10 (2009)
Abstract

Effect of carbon black on electrical property of graphite nanoplatelets/epoxy resin composites 
(p 2041-2045)
Polymer  Engineering &  Science 49 #10 (2009)
Abstract

Reinforcing and toughening on poly(ether imide) by a novel thermo tropic liquid crystalline poly(ester-imide-ketone) with low content 
(p 2046-2053)
Polymer  Engineering &  Science 49 #10 (2009)
Abstract

Dispersion of cellulose crystallites by nonionic surfactants in a hydrophobic polymer matrix 
(p 2054-2061)
Polymer  Engineering &  Science 49 #10 (2009)
Abstract

A parametric study on the processing parameters and properties of a porous poly(DL-lactide-co-glycolide) acid 85/15 bioscaffolds 
(p 2062-2069)
Polymer  Engineering &  Science 49 #10 (2009)
Abstract

Foaming behavior of high-melt strength polypropylene/clay nanocomposites 
(p 2070-2084)
Polymer  Engineering &  Science 49 #10 (2009)
Abstract

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

20.  Polymer International 58 #10 (2008)
(Titles and Abstracts) (H)

Reviews

Review
Functional water-soluble polymers: polymer-metal ion removal and biocide properties 
(p 1093-1114)
Polymer International 58 #10 (2008)
Abstract

Determination of molar mass and solution properties of cationic hydroxyethyl cellulose derivatives by multi-angle laser light scattering with simultaneous refractive index detection 
(p 1115-1119)
Polymer International 58 #10 (2008)
Abstract

A novel pH-sensitive and freeze-thawed carboxymethyl chitosan/poly(vinyl alcohol) blended hydrogel for protein delivery 
(p 1120-1125)
Polymer International 58 #10 (2008)
Abstract

Preparation of grafted polytetrafluoroethylene fibers and adsorption of bilirubin 
(p 1126-1133)
Polymer International 58 #10 (2008)
Abstract  

Characterisation of melt-processed poly(ethylene terephthalate)/synthetic mica nanocomposite sheet and its biaxial deformation behaviour 
(p 1134-1141)
Polymer International 58 #10 (2008)
Abstract

Preparation of albumin-ferrite superparamagnetic nanoparticles using reverse micelles 
(p 1142-1147)
Polymer International 58 #10 (2008)
Abstract

Solid and thermal properties of ABA-type triblock copolymers designed using difunctional fluorine-containing polyimide macroinitiators with methyl methacrylate 
(p 1148-1159)
Polymer International 58 #10 (2008)
Abstract

Synthesis and characterization of hydrophilic copolymers of maleimide derivatives with 2-hydroxyethyl methacrylate: electrochemical and thermal behavior 
(p 1160-1166)
Polymer International 58 #10 (2008)
Abstract

Synthesis of poly(ether amide)s from p-xylylene glycol and bis(ether nitrile)s 
(p 1167-1172)
Polymer International 58 #10 (2008)
Abstract

Preparation of nanosize polyaniline by solid-state polymerization and determination of crystal structure 
(p 1173-1180)
Polymer International 58 #10 (2008)
Abstract  

Synthesis and characterization of polyurethane cationomer/MMT hybrid composite 
(p 1181-1189)
Polymer International 58 #10 (2008)
Abstract

In situ crosslinked hydrogels formed using Cu(I)-free Huisgen cycloaddition reaction 
(p 1190-1195)
Polymer International 58 #10 (2008)
Abstract

Synthesis of sub-micrometer core-shell rubber particles with 1,2-azobisisobutyronitrile as initiator and deformation mechanisms of modified polystyrene under various conditions 
(p 1196-1201)
Polymer International 58 #10 (2008)
Abstract

A novel phosphorus-containing copolyester with low melting temperature and high flame retardancy 
(p 1202-1208)
Polymer International 58 #10 (2008)
Abstract  

On-line acoustic attenuation spectroscopy of emulsions stabilized by vinyl alcohol-vinyl acetate copolymers: a model system for the suspension polymerization of vinyl chloride 
(p 1209-1216)
Polymer International 58 #10 (2008)
Abstract

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

21.  Polymer Journal 41 #9 (2009)
(Titles and Abstracts)

Synthesis and Characterization of Partially Fluorinated Poly(arylene ether) Containing Sulfofluorenyl Groups for Proton Exchange Membranes
(
692-693) Polymer Journal 41 #9 (2009)
[Abstract

Fluorescence Properties of Some Triazene Polyacrylates for Possible Sensor Applications
(
694-701) Polymer Journal 41 #9 (2009)
 [Abstract]

Anionic Ring-Opening Copolymerization of L-Lactide with a Five-Membered Cyclic Carbonate Having a Glucopyranoside Structure
(
702-708) Polymer Journal 41 #9 (2009)
 [Abstract]

1-(Arylmethyloxy)-9,10-anthraquinones: Photoinitiators for Radical and Cationic Polymerizations
(
709-714) Polymer Journal 41 #9 (2009)
[Abstract]

Preparation and Properties of Polyamines: Part II–Controlled and Sustained Release of Nitric Oxide (NO) from Nitrosated Polymer
(
715-725) Polymer Journal 41 #9 (2009)
[Abstract

Vacuum-Deposited Poly(o-phenylenediamine)/WO3·nH2O Nanocomposite Thin Film for NO2 Gas Sensor
(
726-732) Polymer Journal 41 #9 (2009)
[Abstract

Synthesis and Light-Emitting Behavior of Silicon-Bridged Fluorene Copolymers Bearing Oligoarylenevinylene Chromophore
(
733-738) Polymer Journal 41 #9 (2009)
[Abstract]

Induced Circular Dichroism of Anionic Porphyrin TPPS Aggregates in DNA Solutions
(
739-743) Polymer Journal 41 #9 (2009)
[Abstract]

Preparation of Antibacterial Polymer-Grafted Silica Nanoparticle and Surface Properties of Composites Filled with the Silica (2)
(
744-751) Polymer Journal 41 #9 (2009)
 [Abstract

Fabrication, Morphology and Cure Behavior of Triethylenetetramine-Grafted Multiwalled Carbon Nanotube/Epoxy Nanocomposites
(
752-763) Polymer Journal 41 #9 (2009)
[Abstract]

Orientated Bacterial Cellulose Culture Controlled by Liquid Substrate of Silicone Oil with Different Viscosity and Thickness
(
764-770) Polymer Journal 41 #9 (2009)
[Abstract]

Preparation and Characterization of Micrometer-Sized Poly(N-isopropylacrylamide) Hydrogel Particles
(
771-777) Polymer Journal 41 #9 (2009)
[Abstract]

Poly(methacrylate)s Labeled by Perylene Diimide: Synthesis and Applications in Single Chain Detection Studies
(
778-783) Polymer Journal 41 #9 (2009)
[Abstract]

A Conducting Nanocomposite of Polystyrene with Acetylene Black
(
784-786) Polymer Journal 41 #9 (2009)
[Abstract

Formation of Porous Spherulites of Poly(L-lactide) Grown from Solutions
(
787-791) Polymer Journal 41 #9 (2009)
[Abstract]

Amylose Selectively Includes a Specific Range of Molecular Weights in Poly(tetrahydrofuran)s in Vine-Twining Polymerization
(
792-796) Polymer Journal 41 #9 (2009)
[Abstract]

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

22.  Polymer Science: Series A 51 #8 (2009)
(Titles and Abstracts)

Quantum Vibration Dynamics and Deformation of Skeleton of Polymer Molecules
(849)
Polymer Science: Series A 51 #8 (2009)

Phase Diagrams and the Thermodynamic Flory–Huggins Interaction Parameter of Deformed Solutions of Polymers
(858)
Polymer Science: Series A 51 #8 (2009)

Complexation in the Polyacrylonitrile–Amide Solvent–PtCl4 System
(864)
Polymer Science: Series A 51 #8 (2009)

Microstructure of Polyisoprene Produced by Cationic Polymerization: NMR Spectroscopic Study
(870)
Polymer Science: Series A 51 #8 (2009)

Manifestation of the Monoclinic Phase in IR Spectra of Ultrahigh Molecular Weight Polyethylene
(877)
Polymer Science: Series A 51 #8 (2009)

Initial Stages of Growth of Poly(p_xylylene) Coatings: AFM Study
(881)
Polymer Science: Series A 51 #8 (2009)

Specific Features of the Melting of Poly(ethylene terephthalate) After Its Thermal and Mechanical Treatment
(891)
Polymer Science: Series A 51 #8 (2009)

Morphological, Thermal, and Conductivity Studies of Poly(methyl methacrylate)/Polyaniline Dodecylbenzenesulfonate Blends
(898)
Polymer Science: Series A 51 #8 (2009)

Evolution of the Structure and Phase State in Nonequilibrium Heterogeneous Polymer Systems
(904)
Polymer Science: Series A 51 #8 (2009)

Gel Formation of Solutions of Fibrillar Proteins During Flow in a Longitudinal Field
(912)
Polymer Science: Series A 51 #8 (2009)

Solid_Phase Extrusion of Polyamide under Simple Shear
(916)
Polymer Science: Series A 51 #8 (2009)

Effect of Wall Slip on the Shear Flow of a Polymer in a Channel with a Wavy Bottom
( 923)
Polymer Science: Series A 51 #8 (2009)

The Effect of Glass Transition on the Self_oscillation Regime of Tensile Drawing of a Polymer
(930)
Polymer Science: Series A 51 #8 (2009)

The Theory of Viscoelastic Characteristics of a Highly Stretched Macromolecule in Single Molecule AFM
(940)
Polymer Science: Series A 51 #8 (2009)

Monte Carlo Simulation of a Polymer_Analogous Reaction in a Polymer Blend
(957)
Polymer Science: Series A 51 #8 (2009)

The Effect of Glass Transition on the Self_oscillation Regime of Tensile Drawing of a Polymer
(930)
Polymer Science: Series A 51 #8 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

23.   Polymer Science: Series B 51 #7-8 (2009)
(Titles and Abstracts)

Synthesis of Ultra_High_Molecular_Weight Polyacrylonitrile by Anionic Polymerization
(205)
Polymer Science: Series B 51 #7-8 (2009)

Kinetics of Pseudoliving Free_Radical Copolymerization of Styrene and Methyl Methacrylate by the Reversible Addition Fragmentation Chain_Transfer Mechanism
(212)
Polymer Science: Series B 51 #7-8 (2009)

Free_Radical Polymerization of Methyl Methacrylate in the Presence of a Ferrocenyl_Containing Iron(II) Clathrochelate Complex and Initiators of Various Natures
(219)
Polymer Science: Series B 51 #7-8 (2009)

Complex_Radical Polymerization of Methyl Methacrylate in the Presence of Metallocenes
(226)
Polymer Science: Series B 51 #7-8 (2009)

Copolymerization of Acrylic Acid Amides with Alkenyl Halides
(233)
Polymer Science: Series B 51 #7-8 (2009)

Formation of Linear Polymers in Confined Intranetwork Space during Synthesis of Sequential Semi_Interpenetrating Polymer Networks
(239)
Polymer Science: Series B 51 #7-8 (2009)

Hydrophilization of Porous Polyethylene Films by Cold Plasma of Different Types
(247)
Polymer Science: Series B 51 #7-8 (2009)

Microspheres Based on Poly(3_hydroxy)butyrate for Prolonged Drug Release
(256)
Polymer Science: Series B 51 #7-8 (2009)

Reviews
Copolymerization of Divinyl and Monovinyl Monomers
(264)
Polymer Science: Series B 51 #7-8 (2009)

Polymerization

Polymerization of Ethylene with Self_Immobilizing Bis(phenoxyimine) Catalytic Systems
(276)
Polymer Science: Series B 51 #7-8 (2009)

Alternating Copolymerization of Ethylene with Carbon Monoxide on a Supported Palladium Catalyst
(283)
Polymer Science: Series B 51 #7-8 (2009)

Copolymerization of Sodium 2_Acrylamido_2_Methylpropanesulfonate with Sodium Acrylate in Concentrated Aqueous Solutions
(291)
Polymer Science: Series B 51 #7-8 (2009)

Hyperbranched Polylysines: Mechanism of Formation
(296)
Polymer Science: Series B 51 #7-8 (2009)

Chlorinated Polymers Based on Low_Molecular_Mass 1,2_Polybutadiene
(303)
Polymer Science: Series B 51 #7-8 (2009)

Mechanochemical Synthesis of Ferromagnetic Semiconducting Material from Polymer and Nanosized Iron Particles
(309)
Polymer Science: Series B 51 #7-8 (2009)

Statistical Model of Thermal Degradation of Linear Polymers
(313)
Polymer Science: Series B 51 #7-8 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

24.   Polymer Science: Series C 51 #1 (2008) 
(Titles and Abstracts)

New Sulfonated Polynaphthylimides: Synthesis and Investigation
(3)
Polymer Science: Series C 51 #1 (2008) 

New Polybenzimidazoles for Producing Medium_Temperature Proton_Exchange Membranes
(8)
Polymer Science: Series C 51 #1 (2008) 

Synthesis and Properties of Poly[2_(4'_oxyphenylene)_5_benzimidazole] and a Proton_Exchange Membrane Produced on Its Basis
(12)
Polymer Science: Series C 51 #1 (2008) 

New Phenylated Polyphenylenes Carrying Main_Chain Bipyridyl Groups and Their Complexes with Metal Ions
(17)
Polymer Science: Series C 51 #1 (2008) 

One_Stage Synthesis of Network Poly(urethane–isocyanurate) Polymers
(26)
Polymer Science: Series C 51 #1 (2008) 

Chemical Transformations of Poly(arylene ether ketones) Containing Side Functional Groups
(35)
Polymer Science: Series C 51 #1 (2008) 

New Possibilities for Efficient Effect of Charge Transport in Phthalide_Containing Poly(arylene ether ketones)
(46)
Polymer Science: Series C 51 #1 (2008) 

Photochromic Silicon Polymers Based on 1,2_Dihetarylethenes
(51)
Polymer Science: Series C 51 #1 (2008) 

Synthesis of Amphiphilic Network Copolymers Based on Poly(ester dimethacrylates)
(57)
Polymer Science: Series C 51 #1 (2008) 

Synthesis and Characteristics of the Composites Based on Poly(caproamide)
and Multiwalled Carbon Nanotubes
(63)
Polymer Science: Series C 51 #1 (2008) 

Structure and Thermal Properties of Oligomeric Salts of m_Carboranedicarboxylic Acid
(81)
Polymer Science: Series C 51 #1 (2008) 

Thermostable and Heat Resistant Aromatic Polyethers Based on heterocyclic bisphenols
(87)
Polymer Science: Series C 51 #1 (2008) 

Synthesis of Methylidene Phthalide, Its Polymerization, and Properties of Poly(methylidene phthalide)
(126)
Polymer Science: Series C 51 #1 (2008) 

Cyclic and Multicyclic Polymers by Thermodynamically Controlled Polycondensations—Theory and Experiments
(133)
Polymer Science: Series C 51 #1 (2008) 

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

25.  Accounts of  Chemical  Research 42 #9 (2009)
(Titles and Abstracts) 

Two-Dimensional Vibrational Spectroscopy of Rotaxane-Based Molecular Machines
(1462–1469)
Accounts of  Chemical  Research 42 #9 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

26.  Advanced Materials 21 #34 (2009)
(Titles and Abstracts)

Challenges and Progress in High-Throughput Screening of Polymer Mechanical Properties by Indentation 
(p 3551-3561)
Advanced Materials 21 #34 (2009)
Abstract

The Effect of Stress Transfer Within Double-Walled Carbon Nanotubes Upon Their Ability to Reinforce Composites 
(p 3591-3595)
Advanced Materials 21 #34 (2009)
Abstract

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

27.  Angewandte Chemie International Edition 48 #39 (2009)
(Titles and Abstracts)

No articles selected

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

28.  Analytical Letters 42  #13 (2009)
(Titles and Abstracts)

Evaluation of the Analytical Potentialities of a Composite Electrode Modified with Molecularly Imprinted Polymers
(1940 – 1957) Analytical Letters 42  #13 (2009)

Tb3+ PVC-Membrane Electrode Based on 2-{2-(2-Anilinocarbothioyl)hydrazino)-2-oxoacetyl}-N-phenyl-1-hydrazine Carbothioamide
(1958 – 1970) Analytical Letters 42  #13 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

29.  Applied Organometallic Chemistry 23 #10 (2009)
(Titles and Abstracts)

No articles selected

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

30.  Applied Physics Letters 95 #11 (2009)
Titles and Abstracts

Formation of creases on the surfaces of elastomers and gels
(# 111901) Applied Physics Letters 95 #11 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

31.  Catalysis Today 147, #3-4 (2009)
(Titles and Abstracts)

Monitoring the bactericidal effect of UV-A photocatalysis: A first approach through 1D and 2D protein electrophoresis
(169-172)
Catalysis Today 147, #3-4 (2009)

The role of mechanically induced defects in carbon nanotubes to modify the properties of electrodes for PEM fuel cell
(287-299)
Catalysis Today 147, #3-4 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

32.  Chemical Physics 363 #1-3 (2009)
(Titles and Abstracts)

No articles selected

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

33.  Chemical Vapor Deposition 15, #7-9 (2009)
(Titles and Abstracts)

No articles selected

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

34.  Chemistry of  Materials 21 #18 (2009)
(Titles and Abstracts)

Template Synthesis of Porous Polypyrrole in 3D Coordination Nanochannels
(4096–4098)
Chemistry of  Materials 21 #18 (2009)

Template-Directed Synthesis of Hybrid Titania Nanowires within Core−Shell Bishydrophilic Cylindrical Polymer Brushes
(4146–4154)
Chemistry of  Materials 21 #18 (2009)

New Monofunctional POSS and Its Utilization as Dewetting Additive in Methacrylate Based Free-Standing Films
(4163–4171)
Chemistry of  Materials 21 #18 (2009)

Electrochemically Template-Grown Multi-Segmented Gold-Conducting Polymer Nanowires with Tunable Electronic Behavior
(4241–4247)
Chemistry of  Materials 21 #18 (2009)

Tunable Surface Plasmon Band of Position Selective Ag and Au Nanoparticles in Thin Block Copolymer Micelle Films
(4248–4255)
Chemistry of  Materials 21 #18 (2009)

Surface Electroinitiated Emulsion Polymerization (SEEP): A Mechanistic Approach
(4261–4274)
Chemistry of  Materials 21 #18 (2009)

Residual Halide Groups in Gilch-Polymerized Poly(p-phenylene-vinylene) and Their Impact on Performance and Lifetime of Organic Light-Emitting Diodes
(4288–4298)
Chemistry of  Materials 21 #18 (2009)

Mesoporous Silica-Templated Assembly of Luminescent Polyester Particles
(4310–4315)
Chemistry of  Materials 21 #18 (2009)

Surface-Tethered pH-Responsive Hydrogel Thin Films as Size-Selective Layers on Nanoporous Asymmetric Membranes
(4323–4331)
Chemistry of  Materials 21 #18 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

35.  Chinese Physics Letters 26 #9 (2009)
(Titles and Abstracts; Full PDF versions of Articles are available free for 30 days after publication)

No articles selected

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

36.  Ecotoxicology and Environmental Safety 72 #7 (2009)
(Titles and Abstracts) 

No articles selected

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

37.  The Engineering Economist 54 #3 (2009)
(Titles and Abstracts)

No articles selected

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

38.  Engineering Fracture Mechanics 76 #15 (2009)
(Titles and Abstracts)

No articles selected

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

39.  Engineering Optimization 41 #9 (2009)
(Titles and Abstracts)

Determining heat transfer coefficients using evolutionary algorithms
( 855 – 870) Engineering Optimization 41 #9 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

40.  Faraday Discussions #143 (2008)
(Titles and Abstracts)

Challenges in soft nanotechnology
(9 - 1) Faraday Discussions #143 (2008)

The efficiency of encapsulation within surface rehydrated polymersomes
(29 - 46) Faraday Discussions #143 (2008)

Molecular control of ionic conduction in polymer nanopores
(47 - 62) Faraday Discussions #143 (2008)

Template sol–gel synthesis of mesostructured silica composites using metal complexes bearing amphiphilic side chains: immobilization of a polymeric Pt complex formed by a metallophilic interaction
(335 - 343) Faraday Discussions #143 (2008)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

41.  Fatigue & Fracture of Engineering Materials and Structures 32 #10 (2009)
(Title and Abstracts)

No articles selected

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

42.  Fluid Dynamics 44  #4 (2009)
(Titles and Abstracts)

No articles selected

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

43.  Fluid Phase Equilibria 284 #1-2 (2009)
(Titles and Abstracts)

Improvement of an Entropic-FV model based on solubility parameters for prediction of vapor–liquid equilibria of solvent–polymer systems
(105-111)
Fluid Phase Equilibria 284 #1-2 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

44.  International Journal of Heat and Mass Transfer 52 #23-24 (2009)
(Titles and Abstracts)

Heating of saturated porous media in practice: Several causes of local thermal non-equilibrium
(5412-5422)
International Journal of Heat and Mass Transfer 52 #23-24 (2009)

Convection heat and mass transfer along a vertical heated plate with film evaporation in a non-Darcian porous medium
(5447-5450)
International Journal of Heat and Mass Transfer 52 #23-24 (2009)

Electrical cross effects in porous media with ice inclusions. Part II: Double electrical layer mechanism
(5577-5584)
International Journal of Heat and Mass Transfer 52 #23-24 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

45.  International Journal of Impact Engineering 36 #12 (2009)
(Titles and Abstracts)

No articles selected

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

46.  International Journal of Non-Linear Mechanics 44 #9 (2009)
(Titles and Abstracts)

No articles selected

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

47.  International Journal of Plasticity 25 #10 (2009)
(Titles and Abstracts)

Deformation, stress state and thermodynamic force for a growing void in an elastic–plastic material
(1819-1832)
International Journal of Plasticity 25 #10 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

48.  International Journal of Solids and Structures 46 #21 (2009)
(Titles and Abstracts)

A numerical model for the isolation of moving-load induced vibrations by pile rows embedded in layered porous media
(3771-3781)
International Journal of Solids and Structures 46 #21 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

49.  International Journal of Thermal Sciences 48 #11 (2009)
(Titles and Abstracts)

No articles selected

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

50.  Inverse Problems in Science and Engineering 17, #7 (2009)
(Titles and Abstracts) 

No articles selected

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

51.  Journal of Adhesion Science and Technology 23, #10-11 (2009)
(Titles and Abstracts)

Buckling Behaviour of Carbon-Epoxy Adhesively-Bonded Scarf Repairs
(1493-1513) Journal of Adhesion Science and Technology 23, #10-11 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

52.  Journal of  Agricultural and Food Chemistry 57 #18 (2009)
(Titles and Abstracts)

Preparation of Antimicrobial Membranes: Coextrusion of Poly(lactic acid) and Nisaplin in the Presence of Plasticizers
(8392–8398)
Journal of  Agricultural and Food Chemistry 57 #18 (2009)

Stability of Chitosan Powder during Long-Term Storage at Room Temperature
(8434–8438)
Journal of  Agricultural and Food Chemistry 57 #18 (2009)

Effect of Mixed Antimicrobial Agents and Flavors in Active Packaging Films
(8564–8571)
Journal of  Agricultural and Food Chemistry 57 #18 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

53.  Journal of the American  Chemical Society 131 #37 (2009)
(Titles and Abstracts)

Polyelectrolyte Synthesis and in Situ Complex Formation in Ionic Liquids
(13220–13221)
Journal of the American  Chemical Society 131 #37 (2009)

Formation of the Calcium/Poly(3-Hexylthiophene) Interface: Structure and Energetics
(13498–13507)
Journal of the American  Chemical Society 131 #37 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

54.  Journal of Biomaterials Applications 24, #3 (2009) 
(Titles and Abstracts)

Surface Characterization and Cytocompatibility of Three Chitosan/Polycation Composite Membranes for Guided Bone Regeneration  
(209-229) Journal of Biomaterials Applications 24, #3 (2009) 
[Abstract]

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

55.  Journal of Catalysis 267  #1 (2009)
(Titles and Abstracts)

No articles selected

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

56.  Journal of  Chemical & Engineering Data 54 #9 (2009)
(Titles and Abstracts)

Measurements on the Enhancement of the Thermal Conductivity of an Epoxy Resin when Reinforced with Glass Fiber and Carbon Multiwalled Nanotubes
(2365–2370)  
Journal of  Chemical & Engineering Data 54 #9 (2009)

Mass Diffusion Coefficients of Cellulose Acetate Butyrate in Methyl Ethyl Ketone Solutions at Temperatures between (293 and 323) K and Mass Fractions from 0.05 to 0.60 Using the Soret Forced Rayleigh Scattering Method
(2708–2714)  
Journal of  Chemical & Engineering Data 54 #9 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

57.  Journal of Chemical Physics 131 #10 (2009)
(Titles and Abstracts)

Study of phase transition of two-dimensional ferroelectric copolymer P(VDF-TrFE) Langmuir monolayer by Maxwell displacement current and Brewster angle microscopy
# 104702 
Journal of Chemical Physics 131 #10 (2009)

Excited state relaxation in poly(spirobifluorene-co-benzothiadiazole) films
# 104902 
Journal of Chemical Physics 131 #10 (2009)

Preferential positioning of a nanoparticle bound to a polymer: Exact enumeration of a self-avoiding walk chain model
# 104904 
Journal of Chemical Physics 131 #10 (2009)

Polymer adsorption in finite range surface potentials: Planar and spherical adsorbing surfaces
# 104905 
Journal of Chemical Physics 131 #10 (2009)

Thermodynamically stable, size selective solubilization of carbon nanotubes in aqueous solutions of amphiphilic block copolymers
# 104906 
Journal of Chemical Physics 131 #10 (2009)

Time-resolved specular and off-specular neutron reflectivity measurements on deuterated polystyrene and poly(vinyl methyl ether) blend thin films during dewetting process
# 104907  
Journal of Chemical Physics 131 #10 (2009)

Packaging-ejection phase transitions of a polymer chain: Theory and Monte Carlo simulation
# 105104 
Journal of Chemical Physics 131 #10 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

58.  Journal of Coatings Technology, June (2009)
(Titles only)
Trade Journal

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

59.  Journal of Colloid and Interface Science 339 #1 (2009)
(Titles and Abstracts)

Effects of fluorination modification on pore size controlled electrospun activated carbon fibers for high capacity methane storage
(31-35)
Journal of Colloid and Interface Science 339 #1 (2009)

Carboxylated core–shell particles: I. A system showing hindered swelling behavior
(36-44)
Journal of Colloid and Interface Science 339 #1 (2009)

A simple route to interpenetrating network hydrogel with high mechanical strength
(45-52) Journal of Colloid and Interface Science 339 #1 (2009)

Influence of iron oxide nanoparticles on the rheological properties of hybrid chitosan ferrogels
(53-59)
Journal of Colloid and Interface Science 339 #1 (2009)

Multifunctional nanoparticles/silica microsphere assemblies using polyglycidyl methacrylate shells as supports
(83-90)
Journal of Colloid and Interface Science 339 #1 (2009)

Transitional properties of starch colloid with particle size reduction from micro- to nanometer
(117-124)
Journal of Colloid and Interface Science 339 #1 (2009)

Pervaporation separation of n-heptane/thiophene mixtures by polyethylene glycol membranes: Modeling and experimental
(152-159)
Journal of Colloid and Interface Science 339 #1 (2009)

Expanding mesoporosity of triblock-copolymer-templated silica under weak synthesis acidity
(160-167)
Journal of Colloid and Interface Science 339 #1 (2009)

Quantification of the velocity acceleration factor for colloidal transport in porous media using NMR
(168-174)
Journal of Colloid and Interface Science 339 #1 (2009)

Nanopattern transfer and wettability modification of regularly structured metallic and polymeric surfaces with replication
(217-221)
Journal of Colloid and Interface Science 339 #1 (2009)

Steady and dynamic rheological behaviors of sodium carboxymethyl cellulose entangled semi-dilute solution with opposite charged surfactant dodecyl-trimethylammonium bromide
(236-242)
Journal of Colloid and Interface Science 339 #1 (2009)

Low-temperature polymer-assisted synthesis of shape-tunable zinc oxide nanostructures dispersible in both aqueous and non-aqueous media
(249-258) Journal of Colloid and Interface Science 339 #1 (2009)

Gels from a semifluorinated n-alkane in fluorinated solvents as a probe for intermolecular interactions
(259-265)
Journal of Colloid and Interface Science 339 #1 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

60.   Journal of Combinatorial Chemistry 11 #5 (2009)
(Titles and Abstracts)

Combinatorial/High Throughput Methods for the Determination of Polyanhydride Phase Behavior
(820–828)
Journal of Combinatorial Chemistry 11 #5 (2009)

Synbeads Porous-Rigid Methacrylic Support: Application to Solid Phase Peptide Synthesis and Characterization of the Polymeric Matrix by FTIR Microspectroscopy and High Resolution Magic Angle Spinning NMR
(835–845)
Journal of Combinatorial Chemistry 11 #5 (2009)

Multiplicity of Diverse Heterocycles from Polymer-Supported α-Acylamino Ketones
(851–859)
Journal of Combinatorial Chemistry 11 #5 (2009)

Solid-Phase Synthesis of 2-Pyridones, 1,4-Diazepines, and 1,4-Oxazepines from Resin-Bound 3-Amino-2-seleno Ester
(938–942)
Journal of Combinatorial Chemistry 11 #5 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

61.  Journal of Composite Materials 43 #20 (2009)
(Titles and Abstracts)

Effects of Geometric Parameters on the Pin-bearing Strength of Glass/Polyphenylenesulphide Composites  
(2239-2253)  Journal of Composite Materials 43 #20 (2009)
[Abstract]

Effect of Mixing Sequences on the Flexural and Morphological Properties of Epoxy/ Organo-Montmorillonite Nanocomposites  (2269-2284)  Journal of Composite Materials 43 #20 (2009)
[Abstract]

Thermal Dependence of Young’s Modulus of Wood/Polymer/Clay Nanocomposites  
(2285-2301)  Journal of Composite Materials 43 #20 (2009)
[Abstract]

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

62.  Journal of Controlled Release 139 #2 (2009)
(Titles and Abstracts)

Protein kinase Cα-specific peptide substrate graft-type copolymer for cancer cell-specific gene regulation systems
(133-139)
Journal of Controlled Release 139 #2 (2009)

Preparation and characterization of chitosan/polyguluronate nanoparticles for siRNA delivery
(146-152)
Journal of Controlled Release 139 #2 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

63.  Journal of  Dispersion  Science and Technology 30 #8 (2009)
(Titles and Abstracts)

Synthesis and Characterization of D-α-Tocopheryl Polyethylene Glycol 1000 Succinate-Block-Poly (ε-caprolactone) Copolymer Used as Carriers for Microparticles
(1129 – 1134)  Journal of  Dispersion  Science and Technology 30 #8 (2009)

Effect of the Interionic Distance on the Interfacial Behavior of Double-Chain Zwitterionic Amphiphiles
(1135 – 1141)  Journal of  Dispersion  Science and Technology 30 #8 (2009)

Some Corrosion Inhibitors Based on Schiff Base Surfactants for Mild Steel Equipments
(1142 – 1147)  Journal of  Dispersion  Science and Technology 30 #8 (2009)

The State of NaOH in NaOH/Poly(Sodium Acrylate) Composite
(1148 – 1151)  Journal of  Dispersion  Science and Technology 30 #8 (2009)

Metallomicellar Catalysis: Hydrolysis of PNPP Catalyzed by Copper(II), Zinc(II), Cerium(IV) Complexes with Long Alkyl Pyridine Ligands in CTAB Micellar Solution
(1182 – 1187)  Journal of  Dispersion  Science and Technology 30 #8 (2009)

Protein Delivery by Enteric Copolymer Nanoparticles
(1188 – 1194)  Journal of  Dispersion  Science and Technology 30 #8 (2009)

Aripiprazole Loaded Polymeric Biodegradable Microspheres: Formulation and In Vitro Characterization
(1198 – 1202)  Journal of  Dispersion  Science and Technology 30 #8 (2009)

Dynamic and Equilibrium Studies on Adsorption of Cu(II) Ions onto Biopolymeric Cross-Linked Pectin and Alginate Beads
(1208 – 1215)  Journal of  Dispersion  Science and Technology 30 #8 (2009)

Nucleation Activation and Spherical Crystals Morphology of LLDPE/LDPE/TiO2 Nanocomposites Prepared by Non-Isothermal Crystallization
(1231 – 1236)  Journal of  Dispersion  Science and Technology 30 #8 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

64.  Journal of Elasticity 97 #1 (2009)
(Titles and Abstracts)

A One-Dimensional Theory of Solute Diffusion and Degradation in Elastic Solids
(15-30)
Journal of Elasticity 97 #1 (2009)

A Concise Derivation of Membrane Theory from Three-Dimensional Nonlinear Elasticity
(97-101)
Journal of Elasticity 97 #1 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

65.  Journal of Electronic Packaging 131 #3 (2009)
(Titles and Abstracts)

Effect of Warpage of Flip Chip Packages Due to the Underfill Encapsulating Process on Interconnect Reliability
# 031005   Journal of Electronic Packaging 131 #3 (2009)
Abstract

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

66.  Journal of Electrostatics 67, #4 (2009)
(Titles and Abstracts)

Influences of different powders on the characteristics of particle charging and deposition in powder coating processes
(663-671)
Journal of Electrostatics 67, #4 (2009)

Electrodeposition in highly viscous media: Experiments and simulations
(672-677)
Journal of Electrostatics 67, #4 (2009)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

67.  Journal of Energetic Materials 27 #4 (2009)
(Titles and Abstracts)

No articles selected

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

68.  Journal of Engineering Design 20 #5 (2009)
(Titles and Abstracts)

No articles selected

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

69.  Journal of Engineering Materials and Technology 131 #4 (2009)
(Titles and Abstracts)

Inverse Calculation of Uniaxial Stress-Strain Curves From Bending Test Data
# 041001 Journal of Engineering Materials and Technology 131 #4 (2009)
Abstract

Microstructure Design to Improve Wear Resistance in Bioimplant UHMWPE Materials
# 041211  Journal of Engineering Materials and Technology 131 #4 (2009)
 Abstract

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

70.   Journal of Engineering Physics and Thermophysics 82 #3 (2008)
(Titles and Abstracts)

No articles selected

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Roger D. Corneliussen
Editor
Telephone: 610 883 0055
rcorneliussen@4spe.org

www.maropolymeronline.com

Copyright 2009 by Roger D. Corneliussen