Copyright 2009 by Roger D. Corneliussen
Below are links to the new articles by journals. A click should take you to the journal website. This is a great variation in where one ends up. In some cases, a click will take you to the issue in other cases a click will take you to the website and you must do a few more clicks to get to the issue. This is controlled by the publisher and not Maro. Fortunately, with a little practice, this should not be a serious problem. (RDC)
Polymer
Track (News)
Updated daily
Week 51 (12/14-12/18)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
01.
Advanced Materials 21 #47 (2009)
(Titles and Abstracts)
Review
Block Copolymer Nanolithography: Translation of Molecular Level Control to
Nanoscale Patterns
(p 4769-4792)
Advanced Materials 21 #47 (2009)
Abstract
A New, Safe, High-Rate and High-Energy Polymer
Lithium-Ion Battery
(p 4807-4810)
Advanced Materials 21 #47 (2009)
Abstract
Microwave Flash Sintering of Inkjet-Printed
Silver Tracks on Polymer Substrates
(p 4830-4834)
Advanced Materials 21 #47 (2009)
Abstract
A Continuous Flow Synthesis of Micrometer-Sized
Actuators from Liquid Crystalline Elastomers
(p 4859-4862)
Advanced Materials 21 #47 (2009)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
02.
Aerosol Science & Technology
44 #2 (2010)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
03.
The Analyst 135 #1 (2010)
(Titles and Abstracts)
Dual contactless conductivity and amperometric detection on hybrid PDMS/glass
electrophoresis microchips
(96 - 103)
The Analyst 135 #1 (2010)
Cyclic voltammetry on recessed nanodisk-array electrodes prepared from
track-etched polycarbonate membranes with 10-nm diameter pores
(172 - 176)
The Analyst 135 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
04. Analytical
Chemistry
81, #24 (2009)
(Titles and Abstracts)
Naphthalimide−Porphyrin Hybrid Based Ratiometric Bioimaging Probe for Hg2+:
Well-Resolved Emission Spectra and Unique Specificity
(9993–10001)
Analytical Chemistry 81, #24 (2009)
Carbohydrate−Protein Interactions Investigated on Plastic Chips Statically
Coated with Hydrophobically Modified Hydroxyethylcellulose
(10055–10060)
Analytical Chemistry 81, #24 (2009)
Melamine Acoustic Chemosensor Based on Molecularly Imprinted Polymer Film
(10061–10070)
Analytical Chemistry 81, #24 (2009)
Single-Molecule Studies of Oligomer Extraction and Uptake of Dyes in
Poly(dimethylsiloxane) Films
(10089–10096)
Analytical Chemistry 81, #24 (2009)
Effectiveness of Charged Noncovalent Polymer Coatings against Protein Adsorption
to Silica Surfaces Studied by Evanescent-Wave Cavity Ring-Down Spectroscopy and
Capillary Electrophoresis
(10172–10178)
Analytical Chemistry 81, #24 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
05.
Angewandte Chemie International Edition 48 #512(2009)
(Titles and Abstracts)
Metalloorganic Polymerization Catalysis as a Tool
To Probe Crystallization Properties of Polymers: The Case of Isotactic
Poly(1-butene)
(p 9871-9874)
Angewandte Chemie International Edition 48 #512(2009)
Abstract
Freeze Drying Significantly Increases Permanent
Porosity and Hydrogen Uptake in 4,4-Connected Metal-Organic Frameworks
(p 9905-9908)
Angewandte Chemie International Edition 48 #512(2009)
Abstract
A Mesoporous Metal-Organic Framework
(p 9954-9957)
Angewandte Chemie International Edition 48 #512(2009)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
06.
Applied Catalysis A: General 372 #2 (2010)
Titles and Abstracts
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
07.
Applied
Organometallic Chemistry
24 #1 (20010)
(Titles and Abstracts)
Synthesis, structure and biological activity of
triorganotin 1H-tetrazolyl-1-acetates: cyclic hexamer and linkage
coordination polymers
(p 1-7)
Applied Organometallic Chemistry 24 #1 (20010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
08.
Biomacromolecules 10 #12 (2009)
(Titles and Abstracts)
Enzyme-Catalyzed Polycondensation of Polyester Macrodiols with Divinyl Adipate:
A Green Method for the Preparation of Thermoplastic Block Copolyesters
(3176–3181)
Biomacromolecules 10 #12 (2009)
Cationic Poly(amidoamine) Dendrimer Induces Lysosomal Apoptotic Pathway at
Therapeutically Relevant Concentrations
(3207–3214)
Biomacromolecules 10 #12 (2009)
Injectable, Highly Flexible, and Thermosensitive Hydrogels Capable of Delivering
Superoxide Dismutase
(3306–3316)
Biomacromolecules 10 #12 (2009)
Inducing Demixing of Semidilute and Highly Compatible Biopolymer Mixtures in the
Presence of a Strong Polyelectrolyte
(3235–3245)
Biomacromolecules 10 #12 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
09.
Biotechnology
Progress
25 #6 (2009)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
10.
Carbon 48 #3 (2010)
(Titles and Abstracts)
In situ
TEM studies of tribo-induced bonding modifications in near-frictionless carbon
films
(587-591)
Carbon 48 #3 (2010)
Effect of functionalized carbon nanotubes on
the thermal conductivity of epoxy composites
(592-603)
Carbon 48 #3 (2010)
Fabrication and characterization of magnetic
cobalt ferrite/polyacrylonitrile and cobalt ferrite/carbon nanofibers by
electrospinning
(604-611)
Carbon 48 #3 (2010)
Investigation on sensitivity of a
polymer/carbon nanotube composite strain sensor
(680-687)
Carbon 48 #3 (2010)
The synthesis of polyacrylonitrile/carbon
nanotube microspheres by aqueous deposition polymerization under ultrasonication
(688-695)
Carbon 48 #3 (2010)
The production of submicron diameter carbon
fibers by the electrospinning of lignin
(696-705)
Carbon 48 #3 (2010)
Functionalization of multi-walled carbon
nanotubes grafted with self-generated functional groups and their polyamide 6
composites
(721-729)
Carbon 48 #3 (2010)
Selective deposition of semiconducting
single-walled carbon nanotubes onto amino-silane modified indium tin-oxide
surface for the development of poly(3-hexylthiophene)/carbon-nanotube
photovoltaic heterojunctions
(861-867)
Carbon 48 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
11.
Chemical
Society Reviews 39 #1 (2010)
(Titles and Abstracts)
Review
Mechanically bonded macromolecules
(17 - 29)
Chemical
Society Reviews 39 #1 (2010)
Review
Chemistry and materials options of sustainable carbon materials made by
hydrothermal carbonization
(103 - 116)
Chemical
Society Reviews 39 #1 (2010)
Review
Stereocontrolled ring-opening polymerization of cyclic esters: synthesis of new
polyester microstructures
(165 - 173)
Chemical
Society Reviews 39 #1 (2010)
Review
Controlled polymer synthesis—from biomimicry towards synthetic biology
(286 - 300)
Chemical
Society Reviews 39 #1 (2010)
Review
Polypeptide–polymer bioconjugates
(329 - 353)
Chemical
Society Reviews 39 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
12.
Chemical
Week
Titles and Abstracts) Weekly (H)
Trade
Journal
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
13.
Chemistry of Materials 21 #24 (2009)
(Titles
and Abstracts)
Holographic Recording with Polymer Nanocomposites Containing Silver
Nanoparticles Photogenerated in Situ by the Interference Pattern
(5711–5718)
Chemistry of Materials 21 #24 (2009)
Stereoregular Methacrylate-POSS Hybrid Polymers: Syntheses and Nanostructured
Assemblies
(5743–5753)
Chemistry of Materials 21 #24 (2009)
Two-Dimensional-Hexagonal Periodic Mesoporous Polymer Resin Thin Films by Soft
Templating
(5754–5762)
Chemistry of Materials 21 #24 (2009)
From Self-Assembled Microspheres to Self-Templated Nanotubes: Morphologies and
Properties of Sulfur-Bridged Fluoranthene-Based Organic Materials
(5763–5771)
Chemistry of Materials 21 #24 (2009)
Occurrence of Uncommon Infinite Chains Consisting of Edge-Sharing Octahedra in a
Porous Metal Organic Framework-Type Aluminum Pyromellitate Al4(OH)8[C10O8H2]
(MIL-120): Synthesis, Structure, and Gas Sorption Properties
(5783–5791)
Chemistry of Materials 21 #24 (2009)
Photodissociation and Photoionization Mechanisms in Lanthanide-based Fluorinated
β-Diketonate Metal−Organic Chemical-Vapor Deposition Precursors
(5801–5808)
Chemistry of Materials 21 #24 (2009)
New Interpenetrated Copper Coordination Polymer Frameworks having Porous
Properties
(5860–5866)
Chemistry of Materials 21 #24 (2009)
Supramolecular Nanotube Hydrogels: Remarkable Resistance Effect of Confined
Proteins to Denaturants
(5892–5898)
Chemistry of Materials 21 #24 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
14.
e-Polymers (12/15/2009) (137)
(Titles, Abstracts and Articles)
136[2009] Surface charges of anionic and cationic polyelectrolytes and their
effects on the nucleation and the growth of CaCo3 crystals
e-Polymers (12/15/2009) (137)
[Abstract]
137[2009] Starch-metal complexes and their rheology
e-Polymers (12/15/2009) (137)
[Abstract]
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
15.
Industrial &
Engineering Chemistry Research 48 #24 (2009)
(Titles and Abstracts) (T)
Intumescent Flame Retardation of Starch Containing Polypropylene
Semibiocomposites: Flame Retardancy and Thermal Degradation
(10751–10758)
Industrial & Engineering Chemistry Research 48 #24 (2009)
Phase-Transfer Catalyzed Esterification of Brominated Poly(Isobutylene-co-Isoprene)
(10759–10764)
Industrial & Engineering Chemistry Research 48 #24 (2009)
Modeling and Control of Sequence Length Distribution for Controlled Radical
(RAFT) Copolymerization
(10827–10839)
Industrial & Engineering Chemistry Research 48 #24 (2009)
Simultaneous Hydrogenation and Isomerization of Diisobutylenes over Pd-Doped
Ion-Exchange Resin Catalyst
(10857–10863)
Industrial & Engineering Chemistry Research 48 #24 (2009)
Batch-to-Batch Iterative Learning Control of a Batch Polymerization Process
Based on Online Sequential Extreme Learning Machine
(11108–11114)
Industrial & Engineering Chemistry Research 48 #24 (2009)
Preparation and Characterization of Cellulose Nanofibers from Two Commercial
Hardwood and Softwood Pulps
(11211–11219)
Industrial & Engineering Chemistry Research 48 #24 (2009)
Encapsulation of SiO2 and TiO2 Fine Powders with Poly(dl-lactic-co-glycolic
acid) by Rapid Expansion of Supercritical CO2 Incorporated with Ethanol
Cosolvent
(11230–11235)
Industrial & Engineering Chemistry Research 48 #24 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
16.
International Polymer Science and Technology 36, #9 (2009)
(Titles and Abstracts) (H)
HSE-COMPLIANT NAPHTHENIC OILS FOR RUBBERS USED
IN THE TYRE INDUSTRY
(T/1-T/5)
International Polymer Science and Technology 36, #9 (2009)
POLYMERISATION KINETICS AND MOLECULAR
CHARACTERISTICS OF "NEODYMIUM" POLYBUTADIENE: INFLUENCE OF THE MONOMER AND
CATALYST CONCENTRATIONS
(T/7-T/10)
International Polymer Science and Technology 36, #9 (2009)
OIL SOFTENERS AND PLASTICISERS, CERESIN-WAX
PRODUCTS, AND RESINOUS AGENTS: PRESENT STATE OF PRODUCTION AND NEW POSSIBILITIES
(T/11-T/13)
International Polymer Science and Technology 36, #9 (2009)
STUDY OF THE MECHANISM OF ADHESION OF
CHLORINE-CONTAINING POLYMERS IN THE BONDING OF DIFFERENT SUBSTRATES
(T/15-T/18)
International Polymer Science and Technology 36, #9 (2009)
STUDY OF WATER-SOLUBLE ASH AND FACTORS
DETERMINING ITS CONTENT IN CIS-1,4-POLYISOPRENE
(T/19-T/20)
International Polymer Science and Technology 36, #9 (2009)
COMPARATIVE ESTIMATES OF THE MICRO- AND
MACROPHYSICOMECHANICAL PROPERTIES OF ELASTOMER COMPOSITES IN NANOINDENTATION AND
MACRO-STRENGTH EXPERIMENTS
(T/21-T/26)
International Polymer Science and Technology 36, #9 (2009)
PREPARING COMPRESSION MOULDS FOR THE MOULDING
OF MECHANICAL RUBBER GOODS AND ENSURING NORMAL START-UP OF PRODUCTION
(T/27-T/31)
International Polymer Science and Technology 36, #9 (2009)
USE OF RECYCLED SILICONE RUBBER FOR
HIGH-VOLTAGE INSULATION
(T/33-T/35)
International Polymer Science and Technology 36, #9 (2009)
DESIGN FEATURES OF THE FIBROUS CORES FOR
RUBBERISED SOFT PACKING
(T/37-T/38)
International Polymer Science and Technology 36, #9 (2009)
ECOLOGICAL AND COST BENEFITS FROM USING
REGROOVED TYRES. PART 3. REGROOVING METHOD AS AN ENVIRONMENTAL PROTECTION SYSTEM
(T/39-T/42)
International Polymer Science and Technology 36, #9 (2009)
IMPROVEMENT IN DISPERSION OF MWCNTS INTO EPDM
(T/43-T/47)
International Polymer Science and Technology 36, #9 (2009)
SPECIFICS OF CONTROLLING THE MECHANICAL
PROPERTIES OF REINFORCED THERMOPLASTICS
(T/49-T/58)
International Polymer Science and Technology 36, #9 (2009)
INFLUENCE OF THE MOLECULAR WEIGHT OF POLYMETHYL
METHACRYLATE ON THE MOLECULAR MOBILITY AND PHYSICOCHEMICAL PROPERTIES
(T/59-T/65)
International Polymer Science and Technology 36, #9 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
17.
Journal of
Fluorine Chemistry 131, #1 (2010)
Titles and Abstracts
Monitoring and possible reduction of HF in
stack flue gases from ceramic tiles
(6-12)
Journal of
Fluorine Chemistry 131, #1 (2010)
A novel and efficient method for the synthesis
of polyfluoroarenesulfonyl bromides from polyfluoroarenethiols
(13-16)
Journal of
Fluorine Chemistry 131, #1 (2010)
Synthesis of perfluoro-t-butyl
trifluorovinyl ether and its copolymerization with TFE
(17-20)
Journal of
Fluorine Chemistry 131, #1 (2010)
19F NMR spectroscopy as useful tool
for determining the structure in solution of coordination compounds of MF5
(M = Nb, Ta)
(21-28)
Journal of
Fluorine Chemistry 131, #1 (2010)
Practical synthesis of
gem-difluorides from cyclohexanone:
Synthesis of gem-bistrifluoroacetates
and their reactions with fluoride nucleophiles
(29-35)
Journal of
Fluorine Chemistry 131, #1 (2010)
Synthesis and properties of fluorinated
thermoplastic polyurethane elastomer
(36-41)
Journal of
Fluorine Chemistry 131, #1 (2010)
Cation-coordinating properties of
perfluoro-15-crown-5
(42-46)
Journal of
Fluorine Chemistry 131, #1 (2010)
A survey of wave function effects on
theoretical calculation of gas phase 19F NMR chemical shifts using
factorial design
(47-52)
Journal of
Fluorine Chemistry 131, #1 (2010)
Regioselectivity of the protonation of
captodative enamines bearing a CF3 group
(53-58)
Journal of
Fluorine Chemistry 131, #1 (2010)
Synthesis, structural, spectroscopic and
reactivity properties of a new N-2,3,4-trifluorophenyl-3,5-di-tert-butylsalicylaldimine
ligand and its Cu(II) and Pd(II) complexes
(59-65)
Journal of
Fluorine Chemistry 131, #1 (2010)
Synthesis of
5-(perfluoroalkylmethyl)-1,3-dioxolan-4-ones
(66-69)
Journal of
Fluorine Chemistry 131, #1 (2010)
Aminodefluorination of
2-X-pentafluoro-1,4-naphthoquinones (X = NHnBu,
NEt2, and OMe)
(70-77)
Journal of
Fluorine Chemistry 131, #1 (2010)
Can PF2OF exist?
(78-80)
Journal of
Fluorine Chemistry 131, #1 (2010)
Chemoselectivity of cobalt-catalysed
carbonylation—A reliable platform for the synthesis of fluorinated benzoic acids
(81-85)
Journal of
Fluorine Chemistry 131, #1 (2010)
α-Fluoroalkylation of carbonyl compounds
mediated by a highly reactive alkyl-rhodium complex
(86-90)
Journal of
Fluorine Chemistry 131, #1 (2010)
Spectroscopic characterization of crystalline
AlF3 phases
(91-97)
Journal of
Fluorine Chemistry 131, #1 (2010)
Trifluoromethylation of various aromatic
compounds by CF3I in the presence of Fe(II) compound, H2O2
and dimethylsulfoxide
(98-105)
Journal of
Fluorine Chemistry 131, #1 (2010)
A facile and efficient synthesis of β-amino
alcohols using 2,2,2-trifluoroethanol as a metal-free and reusable medium
(106-110)
Journal of
Fluorine Chemistry 131, #1 (2010)
Hafnium (IV) bis(perfluorooctanesulfonyl)imide
complex catalyzed synthesis of polyhydroquinoline derivatives via unsymmetrical
Hantzsch reaction in fluorous medium
(111-114)
Journal of
Fluorine Chemistry 131, #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
18.
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #2 (2010)
(Titles and Abstracts) (H)
Novel Copolymers of Trisubstituted Ethylenes and Styrene. 7. Dihalogen
Ring-Substituted Ethyl 2-Cyano-1-oxo-3-phenyl-2-propenylcarbamates
( 89 – 93)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #2 (2010)
Novel Copolymers of Trisubstituted Ethylenes and Styrene. 8. Fluoro
Ring-Substituted Ethyl 2-Cyano-1-oxo-3-phenyl-2-propenylcarbamates
(94 – 98)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #2 (2010)
Molecular Transport Behavior of Substituted Aromatic Solvents through Biobased
Chain Extended Polyurethane
(99 – 105)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #2 (2010)
Novel Azobenzene-Functionalized Polyelectrolytes of Different Substituted Head
Groups 1: Synthesis, Characterization and Absorption Spectroscopy Studies
(106 – 118)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #2 (2010)
Designing Gelatin Nanocarriers as a Swellable System for Controlled Release of
Insulin: An In-Vitro Kinetic Study
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #2 (2010)
Electrical Conduction and Dielectric Relaxation Phenomena of PVA Based Polymer
Electrolyte Films
(131 – 137)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #2 (2010)
Synthesis and Characterization of CPE-g-GMA Graft Copolymers Obtained by
Suspension Copolymerization
(138 – 143)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #2 (2010)
Photosensitive and Optically Active Poly(amide-imide)s Based on N,N- (pyromellitoyl)-bis-L-amino
acid and Dibenzalacetone Moiety in the Main Chain: Synthesis and
Characterization
(144 – 153)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #2 (2010)
Synthesis of New Poly(biphenylene oxide) with Pendent Trifluoromethyl Group
(154 – 159)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #2 (2010)
Effect of Electron Beam Irradiation and Ethylene Vinyl Acetate Copolymer on the
Properties of NBR/HDPE Blends
(160 – 165)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #2 (2010)
Photo-Physical Properties of a New Norfloxacin-Containing Polymer for Protons
and Fe3+ Sensing
(166 – 171)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #2 (2010)
Reverse ATRP of Methacrylonitrile with Diethyl 2,3-Dicyano-2,3-Diphenyl
Succinate/SmCl3/Lactic Acid
(172 – 176)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #2 (2010)
Synthesis and Chelating Properties of Polystyrene Supported Schiff Base (N,N′-disalicylidenepropylenetriamine)
Resin Toward Some Divalent Metal Ions
(177 – 184)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
19.
Journal of Polymer Science Part A: Polymer Chemistry 48 #2 (2010)
(Titles and Abstracts) (H)
Cyclic polymers: Synthetic strategies and
physical properties
(p 251-284)
Journal of Polymer Science Part A: Polymer Chemistry 48 #2 (2010)
Abstract
Synthesis and characterization of perfluorinated
arylenevinylene polymers
(p 285-291)
Journal of Polymer Science Part A: Polymer Chemistry 48 #2 (2010)
Abstract
Conjugated copolymers comprised
cyanophenyl-substituted spirobifluorene and tricarbazole-triphenylamine repeat
units for blue-light-emitting diodes
(p 292-301)
Journal of Polymer Science Part A: Polymer Chemistry 48 #2 (2010)
Abstract
A highly controllable latent ruthenium Schiff
base olefin metathesis catalyst: Catalyst activation and mechanistic studies
(p 302-310)
Journal of Polymer Science Part A: Polymer Chemistry 48 #2 (2010)
Abstract
Ethylene polymerization by the chromium catalysts
based on bidentate [O, P
O]
or [S, P] ligands
(p 311-319)
Journal of Polymer Science Part A: Polymer Chemistry 48 #2 (2010)
Abstract
Facile one-step synthesis of electromagnetic
functionalized polypyrrole/Fe3O4
nanotubes via a self-assembly process
(p 320-326)
Journal of Polymer Science Part A: Polymer Chemistry 48 #2 (2010)
Abstract
Multistimuli responsive amphiphilic graft
poly(ether amine): Synthesis, characterization, and self-assembly in aqueous
solution
(p 327-335)
Journal of Polymer Science Part A: Polymer Chemistry 48 #2 (2010)
Abstract
Study on incomplete fluorescence quenching of
cationic poly(p-phenylenevinylene)s with different contents of cis-
and trans-vinylic linkages
(p 336-341)
Journal of Polymer Science Part A: Polymer Chemistry 48 #2 (2010)
Abstract
Effect of solvent on the dehydrogenation of
poly(1,3-cyclohexadiene): Formation and characteristics of benzoquinone-aromatic
hydrocarbon charge-transfer complexes
(p 342-350)
Journal of Polymer Science Part A: Polymer Chemistry 48 #2 (2010)
Abstract
Effects of external donors and hydrogen
concentration on oligomer formation and chain end distribution in propylene
polymerization with Ziegler-Natta catalysts
(p 351-358)
Journal of Polymer Science Part A: Polymer Chemistry 48 #2 (2010)
Abstract
Alternating copolymerization of carbon dioxide
and propylene oxide under bifunctional cobalt salen complexes: Role of Lewis
base substituent covalent bonded on salen ligand
(p 359-365)
Journal of Polymer Science Part A: Polymer Chemistry 48 #2 (2010)
Abstract
Synthesis and characterization of cross-linkable
ruthenium complex dye and its application on dye-sensitized solar cells
(p 366-372)
Journal of Polymer Science Part A: Polymer Chemistry 48 #2 (2010)
Abstract
Thermoregulated phase-transfer catalysis via
PEG-armed Ru(II)-bearing microgel core star polymers: Efficient and reusable
Ru(II) catalysts for aqueous transfer hydrogenation of ketones
(p 373-379)
Journal of Polymer Science Part A: Polymer Chemistry 48 #2 (2010)
Abstract
Cleavable multiblock copolymer synthesized by
ring-opening metathesis copolymerization of cyclooctene and macrocyclic olefin
and its hydrolysis to give carboxyl-telechelic polymer
(p 380-388)
Journal of Polymer Science Part A: Polymer Chemistry 48 #2 (2010)
Abstract
Investigation of spacer influences in
phosphorescent-emitting nonconjugated PLED systems
(p 389-402)
Journal of Polymer Science Part A: Polymer Chemistry 48 #2 (2010)
Abstract
Mimicking 
nascent
Cu(0) mediated SET-LRP of methyl acrylate in DMSO leads to complete conversion
in several minutes
(p 403-409)
Journal of Polymer Science Part A: Polymer Chemistry 48 #2 (2010)
Abstract
Dendronized polymers via Diels-Alder click
reaction
(p 410-416)
Journal of Polymer Science Part A: Polymer Chemistry 48 #2 (2010)
Abstract
Copolymerization of ethylene with 1-hexene
promoted by novel multi-chelated non-metallocene complexes with imine bridged
imidazole ligand
(p 417-424)
Journal of Polymer Science Part A: Polymer Chemistry 48 #2 (2010)
Abstract
Thermosensitive graphene nanocomposites formed
using pyrene-terminal polymers made by RAFT polymerization
(p 425-433)
Journal of Polymer Science Part A: Polymer Chemistry 48 #2 (2010)
Abstract
Photoluminescent, liquid-crystalline, and
electrochemical properties of para-phenylene-based alternating conjugated
copolymers
(p 434-442)
Journal of Polymer Science Part A: Polymer Chemistry 48 #2 (2010)
Abstract
Macromolecular brushes synthesized by grafting
from
approach based on click
chemistry
and RAFT polymerization
(p 443-453)
Journal of Polymer Science Part A: Polymer Chemistry 48 #2 (2010)
Abstract
Synthesis and characterization of hyperbranched
polystyrene via click reaction of AB2
macromonomer
(p 454-462)
Journal of Polymer Science Part A: Polymer Chemistry 48 #2 (2010)
Abstract
Synthesis, one- and two-photon properties of
poly[9,10-bis(3,4-bis(2-ethylhexyl-oxy)phenyl)-2,6-anthracenevinylene-alt-N-octyl-3,6-/2,7-carbazolevinylene]
(p 463-470)
Journal of Polymer Science Part A: Polymer Chemistry 48 #2 (2010)
Abstract
Vanadium complex with tetradentate [O,N,N,O]
ligand supported on magnesium type carrier for ethylene homopolymerization and
copolymerization
(p 471-478)
Journal of Polymer Science Part A: Polymer Chemistry 48 #2 (2010)
Abstract
Highly efficient catalysts-acetylacetonato
complexes of transition metals in the 4th period for ring-opening polymerization
of 1,3-benzoxazine
(p 479-484)
Journal of Polymer Science Part A: Polymer Chemistry 48 #2 (2010)
Abstract
Enantioseparation of doubly functionalized polar
norbornenes by HPLC and their ruthenium-catalyzed ring-opening metathesis
polymerization
(p 485-491)
Journal of Polymer Science Part A: Polymer Chemistry 48 #2 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
20.
Journal of Polymer Science B: Polymer Physics 48, #2 (2010)
(Titles and Abstracts)
Crystalline microstructure and mechanical
properties of crosslinked EPDM aged under gamma irradiation
(p 97-105)
Journal of Polymer Science B: Polymer Physics 48, #2 (2010)
Abstract
Surface adsorption-induced conformational
ordering and crystallization of polyethylene oxide
(p 106-112)
Journal of Polymer Science B: Polymer Physics 48, #2 (2010)
Abstract
Study of the quiescent and shear-induced
crystallization kinetics of intercalated PTT/MMT nanocomposites
(p 113-127)
Journal of Polymer Science B: Polymer Physics 48, #2 (2010)
Abstract
Vibrational dynamics of poly(L-histidine)
(p 128-137)
Journal of Polymer Science B: Polymer Physics 48, #2 (2010)
Abstract
Polymer chain of freely-jointed segments in
nematic molecular mean-field
(p 138-144)
Journal of Polymer Science B: Polymer Physics 48, #2 (2010)
Abstract
Effects of carbon nanotubes on dynamic mechanical
property, thermal property, and crystal structure of poly(L-lactic
acid)
(p 145-152)
Journal of Polymer Science B: Polymer Physics 48, #2 (2010)
Abstract
Microfibrillated cellulose/cellulose acetate
composites: Effect of surface treatment
(p 153-161)
Journal of Polymer Science B: Polymer Physics 48, #2 (2010)
Abstract
Liquid-liquid equilibria of polymer solutions:
Flory-huggins with specific interaction
(p 162-167)
Journal of Polymer Science B: Polymer Physics 48, #2 (2010)
Abstract
Laser speckle analysis on correlation between
gelation and phase separation in aqueous methyl cellulose solutions
(p 168-174)
Journal of Polymer Science B: Polymer Physics 48, #2 (2010)
Abstract
Vibrational dynamics and heat capacity in poly(L-lactic
acid)
(p 175-182)
Journal of Polymer Science B: Polymer Physics 48, #2 (2010)
Abstract
Antifouling poly(vinylidene fluoride)
ultrafiltration membranes containing amphiphilic comb polymer additive
(p 183-189)
Journal of Polymer Science B: Polymer Physics 48, #2 (2010)
Abstract
Shear-induced structuring kinetics in
thermoplastic segmented polyurethanes monitored by rheological tools
(p 190-201)
Journal of Polymer Science B: Polymer Physics 48, #2 (2010)
Abstract
Morphological changes of annealed poly-
-caprolactone
by enzymatic degradation with lipase
(p 202-211)
Journal of Polymer Science B: Polymer Physics 48, #2 (2010)
Abstract
Electrochemical properties for ionic
liquid/polymer electrolyte systems
(p 212-219)
Journal of Polymer Science B: Polymer Physics 48, #2 (2010)
Abstract
Review
Effect of shear on the crystallization of the poly(ether ether ketone)
(p 220-225)
Journal of Polymer Science B: Polymer Physics 48, #2 (2010)
Abstract
Secondary electron contrast modulation in SU-8
photoresist films exposed holographically
(p 226-230)
Journal of Polymer Science B: Polymer Physics 48, #2 (2010)
Abstract
Influence of local chain dynamics on diffusion of
gases in polymers as determined by pulsed field gradient NMR
(p 231-235)
Journal of Polymer Science B: Polymer Physics 48, #2 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
21.
Macromolecular Chemistry and Physics 210 #24 (2009)
(Titles and Abstracts)
Homo- and Co-Polymers of Norbornene Containing
Aryl- and Hetaryl-Azo Dyes; Synthesis and Sensing Properties
(p 2099-2106)
Macromolecular Chemistry and Physics 210 #24 (2009)
Abstract
Amphiphilic Hyperbranched Polymers Containing Two
Types of 
-Cyclodextrin
Segments: Synthesis and Properties
(p 2107-2117)
Macromolecular Chemistry and Physics 210 #24 (2009)
Abstract
Aniline-Based Disulfide/Aniline Copolymers as a
High Energy-Storage Material
(p 2118-2124)
Macromolecular Chemistry and Physics 210 #24 (2009)
Abstract
Multi-Responsive Supramolecular Double
Hydrophilic Diblock Copolymer Driven by Host-Guest Inclusion Complexation
between -Cyclodextrin
and Adamantyl Moieties
( p 2125-2137)
Macromolecular Chemistry and Physics 210 #24 (2009)
Abstract
Aggregation Behavior of Poly(N-isopropylacrylamide)
Semitelechelics with a Perfluoroalkyl Segment in Watera
(p 2138-2147)
Macromolecular Chemistry and Physics 210 #24 (2009)
Abstract
Negatively Birefringent Polymer Films
(p 2148-2152)
Macromolecular Chemistry and Physics 210 #24 (2009)
Abstract
Synthesis and Characterization of Soluble Poly(p-phenylene)
Derivatives for PLED Applications
(p 2153-2159)
Macromolecular Chemistry and Physics 210 #24 (2009)
Abstract
Influence of a Positively Charged Moiety on
Aggregation-Disaggregation Self-Oscillation Induced by the BZ Reaction
(p 2160-2166)
Macromolecular Chemistry and Physics 210 #24 (2009)
Abstract
Synthesis of Polystyrene-block-Poly(methyl
methacrylate) with Fluorene at the Junction: Sequential Anionic and Controlled
Radical Polymerization from a Single Carbon
(p 2167-2173)
Macromolecular Chemistry and Physics 210 #24 (2009)
Abstract
Influence of Nanoparticles on the Rheological
Behaviour and Initial Stages of Crystal Growth in Linear Polyethylene
(p 2174-2187)
Macromolecular Chemistry and Physics 210 #24 (2009)
Abstract
A Density Functional Study on the Influence of
the Molecular Flexibility of Donors on the Insertion Barrier and
Stereoselectivity of Ziegler-Natta Propylene Polymerization
(p 2188-2193)
Macromolecular Chemistry and Physics 210 #24 (2009)
Abstract
Noncovalent Nonspecific Functionalization and
Solubilization of Multi-Walled Carbon Nanotubes at High Concentrations with a
Hyperbranched Polyethylene
(p 2194-2202)
Macromolecular Chemistry and Physics 210 #24 (2009)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
22.
Macromolecular Materials and Engineering 294 #12 (2009)
(Titles and Abstracts)
Construction and Properties of Hydrophobic
Association Hydrogels with High Mechanical Strength and Reforming Capability
(p 815-820)
Macromolecular Materials and Engineering 294 #12 (2009)
Abstract
The Influence of Molecular Orientation on the
Yield and Post-Yield Response of Injection-Molded Polycarbonate
(p 821-828)
Macromolecular Materials and Engineering 294 #12 (2009)
Abstract
Predicting the Long-Term Mechanical Performance
of Polycarbonate from Thermal History during Injection Molding
(p 829-838)
Macromolecular Materials and Engineering 294 #12 (2009)
Abstract
High-Performance Carbon Nanotube-Reinforced
Bioplastic
(p 839-846)
Macromolecular Materials and Engineering 294 #12 (2009)
Abstract
Preparation of Micron-Sized Spherulitic Bisphenol
A Polycarbonate Particles in Thin Films
(p 847-854)
Macromolecular Materials and Engineering 294 #12 (2009)
Abstract
Designing Starch-Based Nanospheres to Make
Hydrogels with High Mechanical Strength
(p 855-859)
Macromolecular Materials and Engineering 294 #12 (2009)
Abstract
Behavior of Deformed Droplets in an Immiscible
Polymer Blend: A Comparative Study of Electron Microscopy and Small-Angle X-Ray
Scattering
(p 860-867)
Macromolecular Materials and Engineering 294 #12 (2009)
Abstract
Miscibility and Physical Properties of
Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)/Poly(ethylene oxide) Binary
Blends
(p 868-876)
Macromolecular Materials and Engineering 294 #12 (2009)
Abstract
Benzoylgermanium Derivatives as Novel
Visible-Light Photoinitiators for Dental Composites
(p 877-886)
Macromolecular Materials and Engineering 294 #12 (2009)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
23.
Macromolecular Rapid Communications 30 #24 (2009)
(Titles and Abstracts)
Covalently Scaffolded Inter-
-System
Orientations in -Conjugated
Polymers and Small Molecule Models
(p 2067-2078)
Macromolecular Rapid Communications 30 #24 (2009)
Abstract
Steric Coordination Control of Interchain
Interactions in Conducting Metallopolymers
(p 2079-2083)
Macromolecular Rapid Communications 30 #24 (2009)
Abstract
Transparent and Conductive Polyethylene Oxide
Film by the Introduction of Individualized Single-Walled Carbon Nanotubes
(p 2084-2088)
Macromolecular Rapid Communications 30 #24 (2009)
Abstract
Enhancement of Oxidative Stability of
Polyfluorenes for Direct Thermal Lithography
(p 2089-2095)
Macromolecular Rapid Communications 30 #24 (2009)
Abstract
Synthesis and Fluorescent Properties of
Biodegradable Hyperbranched Poly(amido amine)s
(p 2096-2101)
Macromolecular Rapid Communications 30 #24 (2009)
Abstract
Melt Dispersion and Electrospinning of
Non-Functionalized Multiwalled Carbon Nanotubes in Thermoplastic Polyurethane
(p 2102-2106)
Macromolecular Rapid Communications 30 #24 (2009)
Abstract
Synthesis of Oligothiophene-Layered Polymers
(p 2107-2111)
Macromolecular Rapid Communications 30 #24 (2009)
Abstract
Synthesis of POSS-Functionalized Polyisobutylene
via Direct Initiation
(p 2112-2115)
Macromolecular Rapid Communications 30 #24 (2009)
Abstract
A Facile Route to Prepare Organic/Inorganic
Hybrid Nanomaterials by 
Click
Chemistry
(p 2116-2120)
Macromolecular Rapid Communications 30 #24 (2009)
Abstract
The Self-Assembled Structure of the Diblock
Copolymer PCL-b-P4VP Transforms Upon Competitive Interactions with
Octaphenol Polyhedral Oligomeric Silsesquioxane
(p 2121-2127)
Macromolecular Rapid Communications 30 #24 (2009)
Abstract
Highly Effective and Green Catalytic Approach
Toward 
,
-Dihydroxy-Telechelic
Poly(trimethylenecarbonate)
(p 2128-2135)
Macromolecular Rapid Communications 30 #24 (2009)
Abstract
Non-Fouling Character of
Poly[2-(methacryloyloxy)ethyl Phosphorylcholine]-Modified Gold Surfaces
Fabricated by the Grafting
to
Method: Comparison of its Protein Resistance with Poly(ethylene glycol)-Modified
Gold Surfaces
(p 2136-2140)
Macromolecular Rapid Communications 30 #24 (2009)
Abstract
Highly Asymmetric Phase Diagram of a
Poly(1,2-octylene oxide)-Poly(ethylene oxide) Diblock Copolymer System
Comprising a Brush-Like Poly(1,2-octylene oxide) Block
(p 2141-2146)
Macromolecular Rapid Communications 30 #24 (2009)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
24.
Macromolecular Symposia 286 #1 (2009)
(Titles and Abstracts)
(H)
Chain Dynamics in Solid Polymers and Polymerizing
Systems as Revealed by Broadband Dielectric Spectroscopy
(p 1-19)
Macromolecular Symposia 286 #1 (2009)
Abstract
Non Linearity of Glassy Polymers
(p 20-24)
Macromolecular Symposia 286 #1 (2009)
Abstract
Computer Simulations of Natural and Synthetic
Polymers in Confined Systems
(p 25-33)
Macromolecular Symposia 286 #1 (2009)
Abstract
Spectroscopic, Mechanical and Dynamic-Mechanical
Studies on the Photo-Aging of a Tetrafunctional Epoxy Resin
(p 34-41)
Macromolecular Symposia 286 #1 (2009)
Abstract
Formulation and Evaluation af a Novel Adhesive
Film for Use in Composite Patch Repair
(p 42-48)
Macromolecular Symposia 286 #1 (2009)
Abstract
Demixing Time and Temperature Influence on
Porosity and Interconnection of PLLA Scaffolds Prepared via TIPS
(p 49-52)
Macromolecular Symposia 286 #1 (2009)
Abstract
The Dynamic Impact Experiments Under Active
Confining Pressure and the Constitutive Equation of PP/PA Blends at Multi-Axial
Compressive Stress State
(p 53-59)
Macromolecular Symposia 286 #1 (2009)
Abstract
Synthesis and Characterization of Composite
Materials HDPE/HA and PMMA/HA Prepared by Sonochemistry
(p 60-69)
Macromolecular Symposia 286 #1 (2009)
Abstract
HDPE-Coconut Flour Composites: Effect of Coupling
Agents and Surface Modification
(p 70-80)
Macromolecular Symposia 286 #1 (2009)
Abstract
Towards a Non Empirical Kinetic Model for the
Lifetime Prediction of Polyethylene Pipes Transporting Drinking Water
(p 81-88)
Macromolecular Symposia 286 #1 (2009)
Abstract
Synthesis and Characterization of Polymeric
Materials from Vegetable Oils
(p 89-94)
Macromolecular Symposia 286 #1 (2009)
Abstract
Characterization of Carbon Based Nanoparticles
Dispersion in Aqueous Solution Using Dynamic Light Scattering Technique
(p 95-100)
Macromolecular Symposia 286 #1 (2009)
Abstract
OLED with Hole-Transporting Layer Fabricated by
Ink-Jet Printing
(p 101-106)
Macromolecular Symposia 286 #1 (2009)
Abstract
Degradation of Plasticized PVB During
Reprocessing by Kneading
(p 107-115)
Macromolecular Symposia 286 #1 (2009)
Abstract
Electroless Copper Sulfide Deposition on the
Polyacrylonitrile Films with Chelating Agents and its EMI Shielding
Effectiveness
(p 116-124)
Macromolecular Symposia 286 #1 (2009)
Abstract
Effect of Initiator on the Over-Voltage Positive
Temperature Coefficient of Linear Low Density Polyethylene/Carbon Black Nano
Composites
(p 125-134)
Macromolecular Symposia 286 #1 (2009)
Abstract
Influences of Plasma Treatment and
60Co 
-Ray
Radiation on the Over-Voltage Positive Temperature Coefficient of High Density
Polyethylene/Carbon Black Nano Composites
(p 135-144)
Macromolecular Symposia 286 #1 (2009)
Abstract
Mechanical Properties and Dynamic Mechanical
Analysis of Thermoplastic-Natural Fiber/Glass Reinforced Composites
(p 145-155)
Macromolecular Symposia 286 #1 (2009)
Abstract
DPD Simulations of PMMA-Oleic Acid Mixture
Behaviour in Organic Capped Nanoparticle Based Polymer Nanocomposite
(p 156-163)
Macromolecular Symposia 286 #1 (2009)
Abstract
In-Situ Formation of Silver Nanoparticles in PEI
(p 164-171)
Macromolecular Symposia 286 #1 (2009)
Abstract
Processing and Dynamic-Mechanical Properties of
Poly(butylen terephthalate) Based Nanocomposites
(p 172-179)
Macromolecular Symposia 286 #1 (2009)
Abstract
Effect of a Nanodispersed Clay Fillers on Glass
Transition of Thermosetting Polyurethane
(p 180-186)
Macromolecular Symposia 286 #1 (2009)
Abstract
Using Plasma-Activated High Performance Fibers
with Nanocrystalline Structure in Producing New Reinforced Composite Materials
(p 187-194)
Macromolecular Symposia 286 #1 (2009)
Abstract
Influence of High Temperatures on PET-Concrete
Properties
(p 195-202)
Macromolecular Symposia 286 #1 (2009)
Abstract
A Study of the Swelling Properties of Polymer
Nanocomposites through Electrical and Optical Characterization
(p 203-209)
Macromolecular Symposia 286 #1 (2009)
Abstract
Polyethylene and Poly(propylene)/Clay
Nanocomposites
(p 210-217)
Macromolecular Symposia 286 #1 (2009)
Abstract
Reorientational Dynamics of Polyethylene Glycol/PAMAM
Dendrimer Blends
(p 218-230)
Macromolecular Symposia 286 #1 (2009)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
25.
Macromolecular Theory and Simulations 18 #9 (2009)
(Titles and Abstracts)
Model Development and Validation of
Crystallization Behavior in Injection Molding Prototype Flows
(p 469-494)
Macromolecular Theory and Simulations 18 #9 (2009)
Abstract
Mathematical Modeling of PAG- and NIPAM-Based
Polymer Gel Dosimeters Contaminated by Oxygen and Inhibitor
(p 495-510)
Macromolecular Theory and Simulations 18 #9 (2009)
Abstract
Kinetic Study of the Thermopolymerization of
Furfuryl Methacrylate in Bulk by Mathematical Modeling. Part A: Simulation of
Experimental Data and Sensitivity Analysis of Kinetic Parameters
(p 511-527)
Macromolecular Theory and Simulations 18 #9 (2009)
Abstract
Electrospinning of Polyaniline/Poly(Lactic Acid)
Ultrathin Fibers: Process and Statistical Modeling using a Non-Gaussian
Approach
(p 528-536)
Macromolecular Theory and Simulations 18 #9 (2009)
Abstract
Small-Angle Neutron Scattering from Elastomeric
Networks in which the Junctions Alternate Regularly in their Functionality
(p 537-544)
Macromolecular Theory and Simulations 18 #9 (2009)
Abstract
Properties of Polyvinyl Alcohol Oligomers: A
Molecular Dynamics Study
(p 545-552)
Macromolecular Theory and Simulations 18 #9 (2009)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
26.
Macromolecules 42 #24 (2009)
(Titles and Abstracts)
Mixed Polymer Brush-Grafted Particles: A New Class of Environmentally Responsive
Nanostructured Materials
(9369–9383)
Macromolecules 42 #24 (2009)
Polystyrene-block-poly(vinyl acetate) through the Use of a Switchable RAFT Agent
(9384–9386)
Macromolecules 42 #24 (2009)
Steric Stabilization Effects in Nickel-Catalyzed Regioregular
Poly(3-hexylthiophene) Synthesis
(9387–9389)
Macromolecules 42 #24 (2009)
Controlling Poly(3-hexylthiophene) Crystal Dimension: Nanowhiskers and
Nanoribbons
(9390–9393)
Macromolecules 42 #24 (2009)
Programmable Nanoparticle Assembly via Polymer Single Crystals
(9394–9399)
Macromolecules 42 #24 (2009)
Luminogenic Polyacetylenes and Conjugated Polyelectrolytes: Synthesis,
Hybridization with Carbon Nanotubes, Aggregation-Induced Emission,
Superamplification in Emission Quenching by Explosives, and Fluorescent Assay
for Protein Quantitation
(9400–9411)
Macromolecules 42 #24 (2009)
Degradable Amphiphilic End-Linked Conetworks with Aqueous Degradation Rates
Determined by Polymer Topology
(9412–9421)
Macromolecules 42 #24 (2009)
Lectin Recognizable Biomaterials Synthesized via Nitroxide-Mediated
Polymerization of a Methacryloyl Galactose Monomer
(9422–9434)
Macromolecules 42 #24 (2009)
Synthesis of Poly(n-butyl acrylate)-b-poly(ε-caprolactone) through Combination
of SG1 Nitroxide-Mediated Polymerization and Sn(Oct)2-Catalyzed Ring-Opening
Polymerization: Study of Sequential and One-Step Approaches from a Dual
Initiator
(9435–9442)
Macromolecules 42 #24 (2009)
Inimer-Promoted Synthesis of Branched and Hyperbranched Polylactide Copolymers
(9443–9456)
Macromolecules 42 #24 (2009)
Monitoring Block-Copolymer Crossover-Chemistry in ROMP: Catalyst Evaluation via
Mass-Spectrometry (MALDI)
(9457–9466)
Macromolecules 42 #24 (2009)
Nanostructure, Morphology, and Properties of Fluorous Copolymers Bearing Ionic
Grafts
(9467–9480)
Macromolecules 42 #24 (2009)
Synthesis and Radical Polymerization of Adamantyl Methacrylate Monomers Having
Hemiacetal Moieties
(9481–9485)
Macromolecules 42 #24 (2009)
Thermodynamics, Transition Dynamics, and Texturing in Polymer-Dispersed Liquid
Crystals with Mesogens Exhibiting a Direct Isotropic/Smectic-A Transition
(9486–9497)
Macromolecules 42 #24 (2009)
Rotational and Conformational Dynamics of a Model Polymer Melt at Solid
Interfaces
(9498–9505)
Macromolecules 42 #24 (2009)
High Impact Properties of Polyketone/Polyamide-6 Alloys Induced by
Characteristic Morphology and Water Absorption
(9506–9514)
Macromolecules 42 #24 (2009)
Interactive Crystallization of a Strongly Segregated Double Crystalline Block
Copolymer with Close Crystallizable Temperatures
(9515–9522)
Macromolecules 42 #24 (2009)
Structural Determination of High Density, ATRP Grown Polystyrene Brushes by
Neutron Reflectivity
(9523–9527)
Macromolecules 42 #24 (2009)
Small Angle Neutron Scattering from the Highly Interacting Polymer Mixture TMPC/PSd:
No Evidence of Spatially Dependent χ Parameter
(9528–9536)
Macromolecules 42 #24 (2009)
Self-Diffusion and Cooperative Diffusion in Semidilute Polymer Solutions As
Measured by Fluorescence Correlation Spectroscopy
(9537–9547)
Macromolecules 42 #24 (2009)
Water-Soluble Cationic Aromatic Dendrimers and Their Complexation with DNA
(9548–9560)
Macromolecules 42 #24 (2009)
Phase-Separated Conetwork Structure Induced by Radical Copolymerization of
Poly(dimethylsiloxane)-α,ω-diacrylate and N,N-Dimethylacrylamide
(9561–9567)
Macromolecules 42 #24 (2009)
Hydrophobic Polyelectrolytes in Better Polar Solvent. Structure and Chain
Conformation As Seen by SAXS and SANS
(9568–9580)
Macromolecules 42 #24 (2009)
Local Dynamics and Hydrogen Bonding in Hyperbranched Aliphatic Polyesters
(9581–9591)
Macromolecules 42 #24 (2009)
Stress Relaxation of Comb Polymers with Short Branches
(9592–9608)
Macromolecules 42 #24 (2009)
Easy Orientation of Diblock Copolymers on Self-Assembled Monolayers Using UV
Irradiation
(9609–9612)
Macromolecules 42 #24 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
27.
Applied Physics
Letters 95 #24 (2009)
Titles and Abstracts
Graphene field effect transistors with parylene gate dielectric
(# 24210)
Applied Physics
Letters 95 #24 (2009)
Ferroelectric polymer/silver nanocomposites with high dielectric constant and
high thermal conductivity
(# 242901)
Applied Physics
Letters 95 #24 (2009)
Compact polarization-insensitive biopolymer multimode interference waveguide
splitter
(# 243301)
Applied Physics
Letters 95 #24 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
28. Building
and Environment 45 #4 (2010)
(Titles and Abstracts)
On coupling 1D non-isothermal heat and mass
transfer in porous materials with a multizone building energy simulation model
(865-877)
Building
and Environment 45 #4 (2010)
Impact of paint and wall-paper on mould growth
on plasterboards and aluminum
(916-921)
Building
and Environment 45 #4 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
29.
Chemical Communications #2 (2010)
(Titles, Abstracts and Articles)
A click chemistry based coordination polymer inside small heat shock protein
(264 - 266)
Chemical Communications #2 (2010)
Dicationic and zwitterionic catalysts for the amine-initiated, immortal
ring-opening polymerisation of rac-lactide: facile synthesis of
amine-terminated, highly heterotactic PLA
(273 - 275)
Chemical Communications #2 (2010)
Efficient protein renaturation using tunable hemifluorinated anionic surfactants
as additives
(276 - 273)
Chemical Communications #2 (2010)
Biocompatibility of choline salts as crosslinking agents for collagen based
biomaterials
(294 - 296)
Chemical Communications #2 (2010)
Heteromeric double helix formation by cross-hybridization of chloro-and fluoro-substituted
quinoline oligoamides
(297 - 299)
Chemical Communications #2 (2010)
Chiral bifunctional phase transfer catalysts for asymmetric fluorination of
-keto
esters
(321 - 323)
Chemical Communications #2 (2010)
Catalytic SNAr reaction of non-activated fluoroarenes
with amines via Ru
6-arene
complexes
(336 - 338)
Chemical Communications #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
30.
Coatings
World
13 #11 (2009)
(Titles, Abstracts and Articles)
Trade Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
31.
Colloid Journal 71 #5 (2008)
(Titles and Abstracts)
Formation of silver nanoparticles on shells of polyelectrolyte capsules using
silver-mirror reaction
(596-602)
Colloid Journal 71 #5 (2008)
Surface faceting of gold nanoparticles and adsorption of organic
macromolecules
(668-671)
Colloid Journal 71 #5 (2008)
Multilattice model for calculating characteristics of porous media:
Calculation of electrical conductivity
(692-698)
Colloid Journal 71 #5 (2008)
Comparison of electrochemical characteristics of acetylcellulose
microfiltration membranes and a model system
(706-711)
Colloid Journal 71 #5 (2008)
***************************************************
Colloid Journal 71 #6 (2008)
(Titles and Abstracts)
Adsorption equilibriums in a silica-poly(vinyl alcohol)-gelatin system
(735-738)
Colloid Journal 71 #6 (2008)
Nucleation and growth of gold nanoparticles on adsorption layers and in
ultrathin films of poly(2-vinylpyridine)
(754-763)
Colloid Journal 71 #6 (2008)
Synthesis and characterization of Au and Ag nanoparticles protected by PAMAM and
its derivative
(764-770)
Colloid Journal 71 #6 (2008)
Structure of mechanically activated high-energy Al + polytetrafluoroethylene
nanocomposites
(852-860)
Colloid Journal 71 #6 (2008)
Hydrogen adsorption on model adsorbents in terms of volume filling of micropores:
II. Hydrogen adsorption in the space between Single-Wall carbon nanotubes
(877-881)
Colloid Journal 71 #6 (2008)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
32.
Journal of
Plastic Film and Sheeting 25 #2 (2009)
(Titles and Abstracts)
Recent Technical Advances in Polypropylene
(95-113)
Journal of Plastic Film and Sheeting 25 #2 (2009)
Tailored Additive Release Rates in Extruded Plastic
Films Produced With Smart Blending Machines
(115-140)
Journal of Plastic Film and Sheeting 25 #2 (2009)
[Abstract]
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
33.
Modern
Plastics
(2009)
(Titles and Abstracts)
Weekly
Trade
Magazine
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
34.
Nano
Letters 9 #12 (2009)
(Titles and Abstracts)
Charge Carrier Motion in Disordered Conjugated Polymers: A Multiscale Ab Initio
Study
(3996–4000) Nano
Letters 9 #12 (2009)
Layered Carbon Nanotube-Polyelectrolyte Electrodes Outperform Traditional Neural
Interface Materials
(4012–4018) Nano
Letters 9 #12 (2009)
Porous Graphene as the Ultimate Membrane for Gas Separation
(4019–4024) Nano
Letters 9 #12 (2009)
Templated Self-Assembly of Square Symmetry Arrays from an ABC Triblock
Terpolymer
(4364–4369) Nano
Letters 9 #12 (2009)
Dynamic Nanoinscribing for Continuous and Seamless Metal and Polymer
Nanogratings
(4392–4397) Nano
Letters 9 #12 (2009)
Intracellular Processing of Proteins Mediated by Biodegradable Polyelectrolyte
Capsules
(4398–4402) Nano
Letters 9 #12 (2009)
Polymeric Nanoparticle-Based Activatable Near-Infrared Nanosensor for Protease
Determination In Vivo
(4412–4416) Nano
Letters 9 #12 (2009)
Protein Nanocapsule Weaved with Enzymatically Degradable Polymeric Network
(4533–4538) Nano
Letters 9 #12 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
35.
Plastics,
Additives and Compounding 11 #5 (2009)
(Titles and Abstracts)
Trade Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
36.
Polymer Bulletin 64 #1 (2010)
(Titles
and Abstracts)
Stable free radical polymerization of styrene with
4-sulphonate-2,2,6,6-tetramethylpiperidine-N-oxyl as mediators
(1-13)
Polymer Bulletin 64 #1 (2010)
A novel strategy to synthesize POSS/PS composite and study on its thermal
properties
(15-25)
Polymer Bulletin 64 #1 (2010)
Poly(acrylamide/maleic acid)–sepiolite composite hydrogels for immobilization of
invertase
(27-40)
Polymer Bulletin 64 #1 (2010)
Heavy metal ions removal through poly(acrylamide-co-methacrylic acid)
resin
(41-52)
Polymer Bulletin 64 #1 (2010)
Pendant-decorated polytriphenylamine derivative: potential blue-emitting and
hole-transporting material
(53-65)
Polymer Bulletin 64 #1 (2010)
Thermodegradative and morphological behavior of composites of HDPE with
surface-treated hydroxyapatite
(67-79)
Polymer Bulletin 64 #1 (2010)
Surface properties and chain structure of fluorinated acrylate copolymers
prepared by emulsion polymerization
(81-97)
Polymer Bulletin 64 #1 (2010)
Morphology of composite particles of single wall carbon nanotubes/biodegradable
polyhydroxyalkanoates prepared by spray drying
(99-106)
Polymer Bulletin 64 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
37.
Polymer Composites 31 #1 (2010)
(Titles and Abstracts)
Experimental investigation of acid environment
influences on load-bearing performance of pin-connected continuous
glass-fiber-reinforced polyphenylenesulfide composites
(p 1-9)
Polymer Composites 31 #1 (2010)
Abstract
The composition, morphology, and mechanical
properties of ethylene propylene diene monomer-encapsulated coal gangue
powder/polypropylene composites
(p 10-17)
Polymer Composites 31 #1 (2010)
Abstract
Preparation, characterization, and thermal
stability of novel PMMA/expandable graphite halogen-free flame retardant
composites
(p 18-24)
Polymer Composites 31 #1 (2010)
Abstract
Bearing strength of pin-connected polymer
composites subjected to dynamic loading
(p 25-31)
Polymer Composites 31 #1 (2010)
Abstract
Nanostructured polyaniline reinforced sustainable
resource (soy oil alkyd) based composites
(p 32-37)
Polymer Composites 31 #1 (2010)
Abstract
Friction and wear properties of PTFE composites
filled with PA6
(p 38-42)
Polymer Composites 31 #1 (2010)
Abstract
Visualization study of foaming process for
polyimide foams and its reinforced foams
(p 43-50)
Polymer Composites 31 #1 (2010)
Abstract
pH-sensitive Podophyllotoxin carrier for cancer
cells specific delivery
(p 51-59)
Polymer Composites 31 #1 (2010)
Abstract
Nonisothermal cocuring behavior and kinetics of
epoxy resin/3-glycidyloxypropyl-POSS with MeTHPA
(p 60-67)
Polymer Composites 31 #1 (2010)
Abstract
Influence of addition of
styrene-ethylene/butylene-styrene copolymer on rheological, mechanical, and
tribological properties of polyamide nanocomposites
(p 68-76)
Polymer Composites 31 #1 (2010)
Abstract
Temperature dependence of oxygen diffusion into
clay-doped PS films
(p 77-82)
Polymer Composites 31 #1 (2010)
Abstract
Conducting polyaniline-titanium dioxide
nanocomposites prepared by inverted emulsion polymerization
(p 83-88)
Polymer Composites 31 #1 (2010)
Abstract
Superabsorbent composite XXII: Effects of
modified sepiolite on water absorbency and swelling behavior of chitosan-g-poly(acrylic
acid)/sepiolite superabsorbent composite
(p 89-96)
Polymer Composites 31 #1 (2010)
Abstract
Effect of rubber matrix type on the morphology
and reinforcement effects in carbon black-nanoclay hybrid composites - A
comparative assessment
(p 97-104)
Polymer Composites 31 #1 (2010)
Abstract
Influence of composition and phase morphology on
rheological properties of polypropylene/poly(ethylene-co-octene) blends
(p 105-113)
Polymer Composites 31 #1 (2010)
Abstract
Processing and properties of PLA/thermoplastic
starch/montmorillonite nanocomposites
(p 114-127)
Polymer Composites 31 #1 (2010)
Abstract
The comparison of the behaviors of polymer/clay
nanocomposites based on high density polyethylene and polypropylene in exposure
of electron-irradiation
(p 128-135)
Polymer Composites 31 #1 (2010)
Abstract
A novel cyanate ester resin/microcapsules system
(p 136-144)
Polymer Composites 31 #1 (2010)
Abstract
High conducting multilayer films from
poly(acrylic acid) and graphite by layer-by-layer self-assembly
(p 145-151)
Polymer Composites 31 #1 (2010)
Abstract
Dielectric relaxation of conductive carbon black
reinforced chlorosulfonated polyethylene vulcanizates
(p 152-162)
Polymer Composites 31 #1 (2010)
Abstract
Synthesis of conducting
polyaniline-montmorillonite nanocomposites via inverse emulsion polymerization
in supercritical carbon dioxide
(p 163-172)
Polymer Composites 31 #1 (2010)
Abstract
Experimental failure analysis of bolted joints in
moisture- and temperature-induced composite laminates under preload
(p 173-178)
Polymer Composites 31 #1 (2010)
Abstract
Strength improvement of iPP/MWCNT nanocomposites
(p 179-184)
Polymer Composites 31 #1 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
38.
Polymer
Degradation and Stability
95 #1 (2010)
(Titles and Abstracts)
Study on gamma-ray-induced degradation of
polymer electrolyte by pH titration and solution analysis
(1-5)
Polymer
Degradation and Stability
95 #1 (2010)
A spheres-in-sphere structure for improving
protein-loading poly (lactide-co-glycolide) microspheres
(6-13)
Polymer
Degradation and Stability
95 #1 (2010)
Effects of thermal ageing on mechanical and
thermal behaviors of linear low density polyethylene pipe
(14-20)
Polymer
Degradation and Stability
95 #1 (2010)
Investigation of degradation mechanisms in
mechanical properties of polyimide films exposed to a low earth orbit
environment
(21-33)
Polymer
Degradation and Stability
95 #1 (2010)
The effect of dyes on photo-induced
chemiluminescence emission from polymers
(34-42)
Polymer
Degradation and Stability
95 #1 (2010)
Synthesis of highly photostable blue-emitting
1,8-naphthalimides and their acrylonitrile copolymers
(43-52)
Polymer
Degradation and Stability
95 #1 (2010)
The effect of metal catalyst on the
discoloration of poly(ethylene terephthalate) in thermo-oxidative degradation
(53-58)
Polymer
Degradation and Stability
95 #1 (2010)
Influence of accelerated ageing on the physico-mechanical
properties of alkali-treated industrial hemp fibre reinforced poly(lactic acid)
(PLA) composites
(59-65)
Polymer
Degradation and Stability
95 #1 (2010)
Emission of reactive oxygen species during
degradation of iron gall ink
(66-71)
Polymer
Degradation and Stability
95 #1 (2010)
Synthesis, properties and enzymatic hydrolysis
of biodegradable alicyclic/aliphatic copolyesters based on
1,3/1,4-cyclohexanedimethanol
(72-78)
Polymer
Degradation and Stability
95 #1 (2010)
Evaluation of PFO formation from the
biodegradation of a fluorotelomer-based urethane polymer product in aerobic
soils
(79-85)
Polymer
Degradation and Stability
95 #1 (2010)
Hydrolysis of poly(
(86-88)
Polymer
Degradation and Stability
95 #1 (2010)
Isolation of strains degrading poly(Vinyl
alcohol) at high temperatures and their biodegradation ability
(89-93)
Polymer
Degradation and Stability
95 #1 (2010)
Prediction of the decay resistance of heat
treated wood on the basis of its elemental composition
(94-97)
Polymer
Degradation and Stability
95 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
39.
Polymer
Engineering & Science 50 #1 (2010)
(Titles and Abstracts)
Characterization of contamination effects for two
polypropylene-based materials
(p 1-9)
Polymer Engineering & Science 50 #1 (2010)
Abstract
Morphology and properties of SAN-clay
nanocomposites prepared principally by water-assisted extrusion
(p 10-21)
Polymer Engineering & Science 50 #1 (2010)
Abstract
A neck-in model in extrusion lamination process
(p 22-31)
Polymer Engineering & Science 50 #1 (2010)
Abstract
Flow pattern variations of viscoelastic fluid
flows in three-dimensional branching channel
(p 32-42)
Polymer Engineering & Science 50 #1 (2010)
Abstract
A facile synthesis method of nickel nanotubes
assisted by polyethylene glycol
(p 43-47)
Polymer Engineering & Science 50 #1 (2010)
Abstract
Synthesis and characterization of
phosphorus-containing polysulfone
(p 48-56)
Polymer Engineering & Science 50 #1 (2010)
Abstract
Study on a novel ion-conductive compound
plasticizer for soft and antistatic PVC materials
(p 57-60)
Polymer Engineering & Science 50 #1 (2010)
Abstract
Development of a rheo-dielectric sensor for
online shear stress measurement during the injection molding process
(p 61-68)
Polymer Engineering & Science 50 #1 (2010)
Abstract
Chemical modification and dechlorination of
polyvinyl chloride by substitution with thiocyanate as a nucleophile
(p 69-75)
Polymer Engineering & Science 50 #1 (2010)
Abstract
Preparation and biodegradation of copolyesters
based on poly(ethylene terephthalate) and poly(ethylene glycol)/oligo(lactic
acid) by transesterification
(p 76-83)
Polymer Engineering & Science 50 #1 (2010)
Abstract
Cure kinetics modeling and cure shrinkage
behavior of a thermosetting composite
(p 84-92)
Polymer Engineering & Science 50 #1 (2010)
Abstract
Influence of carbon nanofiber structure on
properties of linear low density polyethylene composites
(p 93-99)
Polymer Engineering & Science 50 #1 (2010)
Abstract
Effects of addition of functionalized SEBS on
rheological, mechanical, and tribological properties of polyamide 6
nanocomposites
(p 100-112)
Polymer Engineering & Science 50 #1 (2010)
Abstract
Studies on the effect of movement during the cure
on the mechanical properties of a silicone building joint sealant
(p 113-119)
Polymer Engineering & Science 50 #1 (2010)
Abstract
Surface infusion of gold nanoparticles into
processed thermoplastics
(p 120-127)
Polymer Engineering & Science 50 #1 (2010)
Abstract
Rheological behavior of polydispersed bubble
suspensions in shear flows
(p 128-137)
Polymer Engineering & Science 50 #1 (2010)
Abstract
Study of the molecular orientation heterogeneity
in polypropylene injection-molded parts by Raman spectroscopy
(p 138-143)
Polymer Engineering & Science 50 #1 (2010)
Abstract
Barrier properties of organic-inorganic hybrid
coatings based on polyvinyl alcohol with improved water resistance
(p 144-153)
Polymer Engineering & Science 50 #1 (2010)
Abstract
Effects of nanoparticle feed location during
nanocomposite compounding
(p 154-164)
Polymer Engineering & Science 50 #1 (2010)
Abstract
Determination of the heat transfer coefficient
from short-shots studies and precise simulation of microinjection molding
(p 165-173)
Polymer Engineering & Science 50 #1 (2010)
Abstract
Application of thiol-ene photopolymerization for
injectable intraocular lenses: A preliminary study
(p 174-182)
Polymer Engineering & Science 50 #1 (2010)
Abstract
Functionalization of carbon nanotubes and carbon
nanofibers used in epoxy/amine matrices that avoid partitioning of the monomers
at the fiber interface
(p 183-190)
Polymer Engineering & Science 50 #1 (2010)
Abstract
Rheological properties of blends of linear and
long-chain branched polypropylenes
(p 191-199)
Polymer Engineering & Science 50 #1 (2010)
Abstract
On the physical behavior of isotactic
polypropylene fibers extruded at different draw-down ratios: II. Structure and
properties
(p 200-208)
Polymer Engineering & Science 50 #1 (2010)
Abstract
Impression creep of PMR-15 resin at elevated
temperatures
(p 209-213)
Polymer Engineering & Science 50 #1 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
40.
Polymer
International
59 #1 (2010)
(Titles and Abstracts)
(H)
Thermoplastic polyurethane and nitrile butadiene
rubber blends with layered double hydroxide nanocomposites by solution blending
(p 2-10)
Polymer International 59 #1 (2010)
Abstract
Molecularly imprinted polyallylamine hydrogels:
another reassessment
(p 11-15)
Polymer International 59 #1 (2010)
Abstract
Review
Theoretical investigations of electronic structure and charge transport
properties in polythiophene-based organic field-effect transistors
(p 16-21)
Polymer International 59 #1 (2010)
Abstract
Oligomeric A2
+ B3 synthesis of highly
branched polysulfone ionomers: novel candidates for ionic polymer transducers
(p 25-35)
Polymer International 59 #1 (2010)
Abstract
Effect of different bases and neutralization
steps on porosity and properties of collagen-based hydrogels
(p 36-42)
Polymer International 59 #1 (2010)
Abstract
Condensation of alkoxysilanes in alcoholic media:
I. Oligomerization of dimethyldiethoxysilane
(p 43-54)
Polymer International 59 #1 (2010)
Abstract
Silk fibroin/chitosan/heparin scaffold:
preparation, antithrombogenicity and culture with hepatocytes
(p 55-61)
Polymer International 59 #1 (2010)
Abstract
Preparation of chitosan-graft-(methyl
methacrylate)/Ag nanocomposite with antimicrobial activity
(p 62-70)
Polymer International 59 #1 (2010)
Abstract
Use of a new natural clay to produce poly(methyl
methacrylate)-based nanocomposites
(p 71-77)
Polymer International 59 #1 (2010)
Abstract
Synthesis and characterization of
poly[acrylamide-co-(sodium 4-styrenesulfonate)] via inverse microemulsion
polymerization
(p 78-84)
Polymer International 59 #1 (2010)
Abstract
X-ray diffraction and dynamic mechanical analyses
of -chitin
whisker-reinforced poly(vinyl alcohol) nanocomposite nanofibers
(p 85-91)
Polymer International 59 #1 (2010)
Abstract
Biocompatibility of braided poly(L-lactic
acid) nanofiber wires applied as tissue sutures
(p 92-99)
Polymer International 59 #1 (2010)
Abstract
Polymer nanocomposites reinforced with
multi-walled carbon nanotubes for semiconducting layers of high-voltage power
cables
(p 100-106)
Polymer International 59 #1 (2010)
Abstract
Preparation and evaluation of epoxy methacrylate
UV-curable coatings containing phthalazinone
(p 107-111)
Polymer International 59 #1 (2010)
Abstract
Effect of an epoxy octasilsesquioxane on the
thermodegradation of an epoxy/amine system
(p 112-118)
Polymer International 59 #1 (2010)
Abstract
Synthesis, characterization and thermal
properties of novel epoxy/expandable graphite composites
(p 119-126)
Polymer International 59 #1 (2010)
Abstract
Phosphated crosslinked pectin as a potential
excipient for specific drug delivery: preparation and physicochemical
characterization
(p 127-135)
Polymer International 59 #1 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
41.
Polymer Journal 41 #12 (2009)
(Titles and Abstracts)
Electrically Induced Microstructures in Micro- and Nano-Suspensions and
Related Physical Properties
(1019-1026)
Polymer Journal 41 #12 (2009)
[Abstract]
Highly Conductive and Transparent
Poly(3,4-ethylenedioxythiophene)/Poly(4-styrenesulfonate) (PEDOT/PSS) Thin Films
(1028-1029)
Polymer Journal 41 #12 (2009)
[Abstract]
Synthesis and Characterization of Chitosan Biguanidine Hydrochloride
under Microwave Irradiation
(1030-1035)
Polymer Journal 41 #12 (2009)
[Abstract]
Thickness Anomalies in Supported Polystyrene Films with Thicknesses
Comparable to the Radius of Gyration
(1036-1040)
Polymer Journal 41 #12 (2009)
[Abstract]
Excess X-ray Scattering Observed at Low Angles during Melting of
Crystalline-Amorphous Diblock Copolymers
(1041-1048)
Polymer Journal 41 #12 (2009)
[Abstract]
Prediction of Solvent Diffusivities in Amorphous Polymers by Free-Volume
Theory: Group Contribution and PALS Methods
(1049-1054)
Polymer Journal 41 #12 (2009)
[Abstract]
Influence of Polymer Morphology on the Capacity of Molecularly Imprinted
Resins to Release or to Retain their Template
(1055-1066)
Polymer Journal 41 #12 (2009)
[Abstract]
A Novel Method for Synthesis of Chiral Polymer Useful for Membrane
Application
(1067-1075)
Polymer Journal 41 #12 (2009)
[Abstract]
White Light Emission from Blue InGaN LED with Fluorescent Conjugated
Polymer Blends
(1076-1079)
Polymer Journal 41 #12 (2009)
[Abstract]
Kinetics of Photo-Induced Chemiluminescence Decay from Polymers
(1085-1091)
Polymer Journal 41 #12 (2009)
[Abstract]
Studies on the Preparation and Properties of Sol–Gel Molecularly
Imprinted Polymer Based on Tetramethoxysilane and Methyltrimethoxysilane for
Recognized Sulfonamides
(1092-1097)
Polymer Journal 41 #12 (2009)
[Abstract]
Effect of Copolymerization Time on the Microstructure and Properties of
Polypropylene/Poly(ethylene-co-propylene) In-Reactor Alloys
(1098-1104)
Polymer Journal 41 #12 (2009)
[Abstract]
Syntheses and Characterization of the Alternating Polymers Based on
Cyclopenta[def]phenanthrene Backbone with Spiro Group
(1105-1110)
Polymer Journal 41 #12 (2009)
[Abstract]
Fusible, Elastic, and Biodegradable Polyesters of
2-Pyrone-4,6-Dicarboxylic Acid (PDC)
(1111-1116)
Polymer Journal 41 #12 (2009)
[Abstract]
Palladium-Mediated Polymerization of Bifunctional Diazocarbonyl
Compounds: Preparation of Crosslinked Polymers by Copolymerization of Bi- and
Monofunctional Diazocarbonyl Compounds
(1117-1123)
Polymer Journal 41 #12 (2009)
[Abstract]
Phenolic Resin-Based Carbon Thin Fibers Prepared by Electrospinning:
Additive Effects of Poly(vinyl butyral) and Electrolytes
(1124-1128)
Polymer Journal 41 #12 (2009)
[Abstract]
Microwave-Assisted Simultaneous Synthesis of Conducting and
Non-Conducting Polymers from Potassium 2,4,6-Tribromophenolate
(1129-1135)
Polymer Journal 41 #12 (2009)
[Abstract]
Oxidative Coupling Copolycondensation of 2,6-Dimethylphenol with
2,5-Dimethylphenol: Highly Thermostable Poly(phenylene ether)
(1136-1143)
Polymer Journal 41 #12 (2009)
[Abstract]
Liquid Chromatography under Limiting Conditions of Desorption IV.
Separation of Macromolecules According to Their Stereoregularity
(1144-1151)
Polymer Journal 41 #12 (2009)
[Abstract]
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
42.
Advanced Synthesis and Catalysis 351 #18 (2009)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
43.
Colloids and Surfaces A: Physicochemical and Engineering Aspects 353 #2-3 (2010)
(Titles and Abstracts)
Effect of latex on surface structure and
wetting of pigment coatings
(104-116)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 353 #2-3 (2010)
Synergistic stabilization of emulsions by
poly(oxypropylene)diamine and Laponite particles
(117-124)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 353 #2-3 (2010)
Sustained delivery of doxorubicin by porous
CaCO3 and chitosan/alginate multilayers-coated CaCO3
microparticles
(132-139)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 353 #2-3 (2010)
Paclitaxel-loaded micelles composed of
folate-poly(ethylene glycol) and poly(γ-benzyl
(140-148)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 353 #2-3 (2010)
Aqueous foam stabilized by hydrophobically
modified silica particles and liquid paraffin droplets
(181-188)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 353 #2-3 (2010)
Adsorption of a foam agent on porous sandstone
and its effect on foam stability
(189-196)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 353 #2-3 (2010)
Evolution process of polymethacrylate hydrogels
investigated by rheological and dynamic light scattering techniques
(197-203)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 353 #2-3 (2010)
Characterisation of the dispersion stability of
a stimulus responsive core–shell colloidal latex
(210-215)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 353 #2-3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
44.
Colloids
and Surfaces B: Biointerfaces 75 #2 (2010)
(Titles and Abstracts)
Ammonium methacrylate units polymer content and
their effect on acyclovir colloidal nanoparticles properties and bioavailability
in human volunteers
(398-404)
Colloids
and Surfaces B: Biointerfaces 75 #2 (2010)
Formation and cross-linking of fibrinogen
layers monitored with in situ
spectroscopic ellipsometry
(410-417)
Colloids
and Surfaces B: Biointerfaces 75 #2 (2010)
Encapsulation of proteins in poly(
(418-424)
Colloids
and Surfaces B: Biointerfaces 75 #2 (2010)
Using flowerlike polymer–copper nanostructure
composite and novel organic–inorganic hybrid material to construct an
amperometric biosensor for hydrogen peroxide
(425-431)
Colloids
and Surfaces B: Biointerfaces 75 #2 (2010)
Preparation of chitosan microspheres by
ionotropic gelation under a high voltage electrostatic field for protein
delivery
(448-453)
Colloids
and Surfaces B: Biointerfaces 75 #2 (2010)
Evaluation of boronate-containing polymer
brushes and gels as substrates for carbohydrate-mediated adhesion and
cultivation of animal cells
(510-519)
Colloids
and Surfaces B: Biointerfaces 75 #2 (2010)
Fabrication of nanomicelle with enhanced
solubility and stability of camptothecin based on α,β-poly[(N-carboxybutyl)-
(543-549)
Colloids
and Surfaces B: Biointerfaces 75 #2 (2010)
Amphiphilic drug persuaded collapse of
polyvinylpyrrolidone and poly(ethylene glycol) chains: A dynamic light
scattering study
(590-594)
Colloids
and Surfaces B: Biointerfaces 75 #2 (2010)
A quantitative study of the enzymatic activity
of horseradish peroxidase at a planar poly(acrylic acid) brush
(612-616)
Colloids
and Surfaces B: Biointerfaces 75 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
45.
Composite Interfaces 16
#47-9(2009)
(Titles
and Abstracts)
Interfaces of Cellulose Fiber Filled Polymer Composites
(579-581)
Composite Interfaces 16
#47-9(2009)
Relationship Between Interfacial Adhesion and Viscosity of Cellulose Fiber
Filled Polypropylene and Poly(ε-caprolactone): A Review
(583-598)
Composite Interfaces 16
#47-9(2009)
Multiscale Reinforcement of Polymers Combining Cellulosic Wood Pulp with Layered
Silicate Nanoplatelets
(599-618)
Composite Interfaces 16
#47-9(2009)
Effects of Regenerated Cellulose and Natural Fiber on Interfacial Adhesion,
Rheology and Crystallization Property in ε-Polycaprolactone Compounds
(619-637)
Composite Interfaces 16
#47-9(2009)
Resin-Sisal and Wood Flour Composites Made from Unsaturated Polyester Thermosets
(639-657)
Composite Interfaces 16
#47-9(2009)
Fabrication and Properties of Recycled Cellulose Fibre-Reinforced Epoxy
Composites
(659-669)
Composite Interfaces 16
#47-9(2009)
Modification of Wood Flour Surfaces by Esterification with Acid Chlorides: Use
in HDPE/Wood Flour Composites
(671-686)
Composite Interfaces 16
#47-9(2009)
Ultrasound-Assisted Surface-Modification of Wood Particulates for Improved
Wood/Plastic Composites
(687-709)
Composite Interfaces 16
#47-9(2009)
Effect of Fiber Surface Modification on the Interfacial and Mechanical
Properties of Kenaf Fiber-Reinforced Thermoplastic and Thermosetting Polymer
Composites
(711-729)
Composite Interfaces 16
#47-9(2009)
Melt Flow Instabilities of Wood Polymer Composites
(731-750)
Composite Interfaces 16
#47-9(2009)
The Effects of Morphological Properties of Henequen Fiber Irradiated by EB on
the Mechanical and Thermal Properties of Henequen Fiber/PP Composites
(751-768)
Composite Interfaces 16
#47-9(2009)
Cellulose-Based Natural Fiber Topography and the Interfacial Shear Strength of
Henequen/Unsaturated Polyester Composites: Influence of Water and Alkali
Treatments
(769-779)
Composite Interfaces 16
#47-9(2009)
Novel Jute/Polycardanol Biocomposites: Effect of Fiber Surface Treatment on
Their Properties
(781-795)
Composite Interfaces 16
#47-9(2009)
Injection Molding of Wood-Fiber/Plastic Composite Foams
(797-811)
Composite Interfaces 16
#47-9(2009)
Fluorocarbon Barriers on Starch Foam Tray Surfaces Through SF6 Cold
Plasma Treatment
(813-824)
Composite Interfaces 16
#47-9(2009)
A New Approach to Fabricating Cellulosic-Polymer Composites
(825-836)
Composite Interfaces 16
#47-9(2009)
Effect of a Novel Polymeric Coupling Agent on the Water Uptake Property and Warp
Stability of Poly(vinyl chloride)/Bamboo Flour Composite
(837-846)
Composite Interfaces 16
#47-9(2009)
Forced Air Plasma Treatment (FAPT) of Hybrid Wood Plastic Composite (WPC)-Fiber
Reinforced Plastic (FRP) Surfaces
(847-867)
Composite Interfaces 16
#47-9(2009)
Microcellular and Solid Polylactide-Flax Fiber Composites
(869-890)
Composite Interfaces 16
#47-9(2009)
Preparation of Encapsulated Polymer Adhesion Beads and Adhesion with Porous
Fibers
(891-900)
Composite Interfaces 16
#47-9(2009)
An Optical Model for Polarization Microscopy Analysis of Pulp Fibre-to-Fibre
Bonds
(901-922)
Composite Interfaces 16
#47-9(2009)
Synthesis of Lignin-Based Thermoplastic Copolyester Using Kraft Lignin as a
Macromonomer
(923-935)
Composite Interfaces 16
#47-9(2009)
Moisture Absorption Behavior of Wood/Plastic Composites Made with
Ultrasound-Assisted Alkali-Treated Wood Particulates
(937-951)
Composite Interfaces 16
#47-9(2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
46.
Composites Part A: Applied Science and Manufacturing 41 #1 (2010)
(Titles and Abstracts)
Assessment of semi-impregnated fabrics in
honeycomb sandwich structures
(8-15)
Composites Part A: Applied Science and Manufacturing 41 #1 (2010)
Study of saturated and unsaturated permeability
in natural fiber fabrics
(16-21)
Composites Part A: Applied Science and Manufacturing 41 #1 (2010)
Continuous transverse permeability of fibrous
media
(22-28)
Composites Part A: Applied Science and Manufacturing 41 #1 (2010)
Permeability prediction for the meso–macro
coupling in the simulation of the impregnation stage of Resin Transfer Moulding
(29-35)
Composites Part A: Applied Science and Manufacturing 41 #1 (2010)
Characterization of Liquid Resin Infusion (LRI)
filling by fringe pattern projection and in situ thermocouples
(36-44)
Composites Part A: Applied Science and Manufacturing 41 #1 (2010)
Simulation of the reinforcement compaction and
resin flow during the complete resin infusion process
(45-57)
Composites Part A: Applied Science and Manufacturing 41 #1 (2010)
A new computational tool for liquid composite
moulding process design based on configuration spaces
(58-77)
Composites Part A: Applied Science and Manufacturing 41 #1 (2010)
A flux limiter strategy for solving the
saturation equation in RTM process simulation
(78-82)
Composites Part A: Applied Science and Manufacturing 41 #1 (2010)
Bubble formation and motion in non-crimp
fabrics with perturbed bundle geometry
(83-92)
Composites Part A: Applied Science and Manufacturing 41 #1 (2010)
A model for thermoplastic melt impregnation of
fiber bundles during consolidation of powder-impregnated continuous fiber
composites
(93-100)
Composites Part A: Applied Science and Manufacturing 41 #1 (2010)
Effect of annealing on the thermal expansion
and residual stresses of bidirectional thermoplastic composite laminates
(101-107)
Composites Part A: Applied Science and Manufacturing 41 #1 (2010)
Material characterization and residual stresses
simulation during the manufacturing process of epoxy matrix composites
(108-115)
Composites Part A: Applied Science and Manufacturing 41 #1 (2010)
Investigation of the dimensional stability of
carbon epoxy cylinders manufactured by resin transfer moulding
(116-124)
Composites Part A: Applied Science and Manufacturing 41 #1 (2010)
Manufacturing requirements in design: The RTM
process in aeronautics
(125-130)
Composites Part A: Applied Science and Manufacturing 41 #1 (2010)
Effect of bark fiber content and size on the
mechanical properties of bark/HDPE composites
(131-137)
Composites Part A: Applied Science and Manufacturing 41 #1 (2010)
Effect of system of initiators on the process
cycle of nonisothermal resin transfer molding – Numerical investigation
(138-145)
Composites Part A: Applied Science and Manufacturing 41 #1 (2010)
Chemical, morphological, and mechanical
analysis of rice husk/post-consumer polyethylene composites
(154-160)
Composites Part A: Applied Science and Manufacturing 41 #1 (2010)
Thermal conductivity of spark plasma sintering
consolidated SiCp/Al composites containing pores: Numerical study and
experimental validation
(161-167)
Composites Part A: Applied Science and Manufacturing 41 #1 (2010)
Investigation of trapezoidal corrugated aramid/epoxy
laminates under large tensile displacements transverse to the corrugation
direction
(168-176)
Composites Part A: Applied Science and Manufacturing 41 #1 (2010)
Isogrid stiffened syntactic foam cored sandwich
structure under low velocity impact
(177-184)
Composites Part A: Applied Science and Manufacturing 41 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
47.
Composites Part B: Engineering 40 #8 (2009)
(Titles
and Abstracts)
Non-classical effects in FRP composite tubes
(681-697)
Composites Part B: Engineering 40 #8 (2009)
Three-dimensional analysis of the interaction
between a matrix crack and nanofiber
(698-704)
Composites Part B: Engineering 40 #8 (2009)
3D mathematical modelling for robotic pick up
of textile composites
(705-713)
Composites Part B: Engineering 40 #8 (2009)
Shear capacity of reinforced concrete members
strengthened in shear with FRP by using strut-and-tie models and genetic
algorithms
(714-726)
Composites Part B: Engineering 40 #8 (2009)
Novel nanocellulosic xylan composite film
(727-730)
Composites Part B: Engineering 40 #8 (2009)
Optimization of laminated composites
considering different failure criteria
(731-740)
Composites Part B: Engineering 40 #8 (2009)
Dynamic analysis of composite coil springs of
arbitrary shape
(741-757)
Composites Part B: Engineering 40 #8 (2009)
Flexural stiffness modelling of RC slab
strengthened by externally bonded FRP
(758-765)
Composites Part B: Engineering 40 #8 (2009)
Numerical model for CFRP confined concrete
elements subject to monotonic and cyclic loadings
(766-775)
Composites Part B: Engineering 40 #8 (2009)
A modified micromechanical curved beam
analytical model to predict the tension modulus of 2D plain weave fabric
composites
(776-783)
Composites Part B: Engineering 40 #8 (2009)
Experimental study of bond behaviour between
concrete and FRP bars using a pull-out test
(784-797)
Composites Part B: Engineering 40 #8 (2009)
The effect of hybridization on the GFRP
behavior under high velocity impact
(798-803)
Composites Part B: Engineering 40 #8 (2009)
Numerical analysis of the stress intensity
factors for repaired cracks from a notch with bonded composite semicircular
patch
(804-810)
Composites Part B: Engineering 40 #8 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
48.
Composites
Science and Technology 70 #1 (20010)
(Titles and Abstracts)
An assessment of the science and technology of
carbon nanotube-based fibers and composites
(1-19)
Composites
Science and Technology 70 #1 (20010)
Interlaminar and intralaminar reinforcement of
composite laminates with aligned carbon nanotubes
(20-28)
Composites
Science and Technology 70 #1 (20010)
Polyolefin composites with curaua fibres:
Effect of the processing conditions on mechanical properties, morphology and
fibres dimensions
(29-35)
Composites
Science and Technology 70 #1 (20010)
Effects of interphase material properties in
unidirectional fibre reinforced composites
(36-44)
Composites
Science and Technology 70 #1 (20010)
Die drawn wood polymer composites. I.
Mechanical properties
(45-52)
Composites
Science and Technology 70 #1 (20010)
Die drawn wood polymer composites. II.
Micromechanical modelling of tensile modulus
(53-60)
Composites
Science and Technology 70 #1 (20010)
Multiscale progressive failure analysis of
textile composites
(61-72)
Composites
Science and Technology 70 #1 (20010)
A discrete element method for the simulation of
CFRP cutting
(73-80)
Composites
Science and Technology 70 #1 (20010)
A phenomenologically based damage model for
textile composites with crimped reinforcement
(81-87)
Composites
Science and Technology 70 #1 (20010)
Comparing single-walled carbon nanotubes and
samarium oxide as strain sensors for model glass-fibre/epoxy composites
(88-93)
Composites
Science and Technology 70 #1 (20010)
Damage characterization of a cross-ply carbon
fiber/epoxy laminate by an optical measurement of the displacement field
(94-101)
Composites
Science and Technology 70 #1 (20010)
Effect of short carbon fibers and MWCNTs on
microwave absorbing properties of polyester composites containing nickel-coated
carbon fibers
(102-109)
Composites
Science and Technology 70 #1 (20010)
Synthesis and characterization of biodegradable
poly(
(110-115)
Composites
Science and Technology 70 #1 (20010)
Morphological, thermal and mechanical
characterization of okra (Abelmoschus
esculentus) fibres as potential reinforcement in polymer composites
(116-122)
Composites
Science and Technology 70 #1 (20010)
Commingled natural fibre/polypropylene wrap
spun yarns for structured thermoplastic composites
(130-135)
Composites
Science and Technology 70 #1 (20010)
Investigation of combined stress state failure
criterion for glass fiber/epoxy interface by the cruciform specimen method
(143-150)
Composites
Science and Technology 70 #1 (20010)
Comparison of nanotubes produced by fixed bed
and aerosol-CVD methods and their electrical percolation behaviour in melt mixed
polyamide 6.6 composites
(151-160)
Composites
Science and Technology 70 #1 (20010)
Fabrication of nature-inspired bulk laminar
composites by a powder processing
(161-166)
Composites
Science and Technology 70 #1 (20010)
Polybutene as a matrix for wood plastic
composites
(167-172)
Composites
Science and Technology 70 #1 (20010)
A comparative study of the electrical and
mechanical properties of epoxy nanocomposites reinforced by CVD- and arc-grown
multi-wall carbon nanotubes
(173-180)
Composites
Science and Technology 70 #1 (20010)
Damage evolution of novel 3D textile-reinforced
composites under fatigue loading conditions
(186-192)
Composites
Science and Technology 70 #1 (20010)
The tensile fatigue behaviour of a silica
nanoparticle-modified glass fibre reinforced epoxy composite
(193-199)
Composites
Science and Technology 70 #1 (20010)
Utilization of polymer degradation to modify
electrical properties of poly(
(200-205)
Composites
Science and Technology 70 #1 (20010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
49.
Composite Structures 92 #3 (2010)
(Titles and Abstracts)
Flexural response predictions of reinforced
concrete beams strengthened with prestressed CFRP plates
(612-622)
Composite Structures 92 #3 (2010)
Low-velocity impact on carbon/epoxy tubes
subjected to torque – Experimental results, analytical models and FEM analysis
(623-632)
Composite Structures 92 #3 (2010)
Hygrothermal effects on multilayered composite
plates using a refined higher order theory
(633-646)
Composite Structures 92 #3 (2010)
On the tensile behavior of an embedded carbon
nanotube in polymer matrix with non-bonded interphase region
(647-652)
Composite Structures 92 #3 (2010)
A C0-type higher-order theory for
bending analysis of laminated composite and sandwich plates
(653-661)
Composite Structures 92 #3 (2010)
Through thickness stress distributions in
pultruded GRP materials
(662-668)
Composite Structures 92 #3 (2010)
Characterization and numerical evaluation of
vibration on elastic–viscoelastic sandwich structures
(669-675)
Composite Structures 92 #3 (2010)
Nonlinear free vibration of functionally graded
carbon nanotube-reinforced composite beams
(676-683)
Composite Structures 92 #3 (2010)
Analytic homogenization for torsion of
orthotropic sandwich plates: Application to corrugated cardboard
(699-706)
Composite Structures 92 #3 (2010)
A new shear-flexible FRP-reinforced concrete
slab element
(730-735)
Composite Structures 92 #3 (2010)
An experimental study on the effect of tow
variations on compressive characteristics of plain weave carbon/epoxy composites
under compressions
(736-744)
Composite Structures 92 #3 (2010)
Nano-structured sandwich composites response to
low-velocity impact
(745-751)
Composite Structures 92 #3 (2010)
Deformation behavior and mechanical properties
of braided rectangular pipes
(752-756)
Composite Structures 92 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
50.
Construction
and Building Materials
24 #2 (2010)
(Titles and Abstracts)
Performance of slash pine fibers in fiber
cement products
(165-170)
Construction
and Building Materials
24 #2 (2010)
Asbestos-free technology with new high
toughness polypropylene (PP) fibers in air-cured Hatschek process
(171-180)
Construction
and Building Materials
24 #2 (2010)
Effect of accelerated carbonation on
cementitious roofing tiles reinforced with lignocellulosic fibre
(193-201)
Construction
and Building Materials
24 #2 (2010)
Durable phosphate-bonded natural fiber
composite products
(215-219)
Construction
and Building Materials
24 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
51.
Corrosion Science 52 #1
(2010)
(Titles and Abstracts)
An ultrathin polymer coating of carboxylate
self-assembled monolayer adsorbed on passivated iron to prevent iron corrosion
in 0.1 M Na2SO4
(1-6)
Corrosion Science 52 #1 (2010)
Electrochemical investigation of the
coating/substrate interface stability for styrene/acrylate copolymer films
applied on iron
(37-44)
Corrosion Science 52 #1 (2010)
Electrodeposition of polypyrrole onto NiTi and
the corrosion behaviour of the coated alloy
(229-234)
Corrosion Science 52 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
52.
Dalton
Transactions #2 (2010)
(Titles
and Abstracts)
Recent progress in olefin polymerization catalyzed by transition metal
complexes: new catalysts and new reactions
(311 - 328)
Dalton Transactions #2 (2010)
Three-coordinate late transition metal fluorinated alkoxide complexes
(374 - 383)
Dalton Transactions #2 (2010)
Using metal–ligand interactions for the synthesis of metallostar polymers
(388 - 391)
Dalton Transactions #2 (2010)
New insights into addition reactions of dialkylzinc reagents to trifluoromethyl
ketones: Structural authentication of a
-hydride
elimination product containing a tetranuclear zinc chain
(520 - 526)
Dalton Transactions #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
53.
Diamond and Related Materials 19 #1 (2010)
(Titles
and Abstracts)
A study of biotribological behavior of DLC
coatings and its influence to human serum albumin
(62-66)
Diamond and Related Materials 19 #1 (2010)
Dielectric properties of a novel high absorbing
onion-like-carbon based polymer composite
(91-99)
Diamond and Related Materials 19 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
54.
Doklady Chemistry 429 #1 (2009)
(Titles only)
Carbofunctional organosilicon monomers and polymers: Reagents for new generation
test systems
(268-272)
Doklady Chemistry 429 #1 (2009)
Novel fluorine-containing bis(tetraarylcyclopentadienones)
(277-282)
Doklady Chemistry 429 #1 (2009)
Scientific grounds and process aspects for the production of polygalacturonate
with Ca2+ and Fe2+ ions
(297-300)
Doklady Chemistry 429 #1 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
55.
Drying Technology 27 #12 (2009)
(Titles and Abstracts)
Description of Water Sorption Isotherms of Natural and Degradable Polymers Using
BET and DA Equations
(1286 – 1291)
Drying Technology 27 #12 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
56.
Dyes and Pigments 85 #1-2 (2010)
(Titles and Abstracts)
Spectrophotometric investigation of the
monomer–dimer process of C.I. Basic Blue 9 in aqueous polymer–surfactant system
(16-20)
Dyes and Pigments 85 #1-2 (2010)
High luminescence, organic–inorganic
nanocomposite films with covalently linked 8-hydroxyquinoline anchored to ZnS
nanoparticles
(66-72)
Dyes and Pigments 85 #1-2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
57.
Ecotoxicology
and Environmental Safety 73 #2 (2009)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
58.
Energy and Buildings 42 #2 (2010)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
59.
Energy
& Fuels 23 #12 (2009)
(Titles
and Abstracts)
Effects of Reactor Configuration on the Yield of Solid Carbon from Pyrolysis of
Low-Density Polyethylene
(6095–6101)
Energy & Fuels 23 #12 (2009)
Pyrolysis Gas Chromatography Mass Spectrometry Studies to Evaluate
High-Temperature Aqueous Pretreatment as a Way to Modify the Composition of
Bio-Oil from Fast Pyrolysis of Wheat Straw
(6242–6252)
Energy & Fuels 23 #12 (2009)
Analysis of Cross-Linking Behavior during Pyrolysis of Cellulose for Elucidating
Reaction Pathway
(5765–5772)
Energy & Fuels 23 #12 (2009)
Influence of Operating Variables on Solid Carbons Obtained by Low-Density
Polyethylene Pyrolysis in a Semicontinuous Fast Heating Quartz Reactor
(6102–6110)
Energy & Fuels 23 #12 (2009)
Role of Polydispersity and Cocrystallization on the Gelation of Long-Chained n-Alkanes
in Solution
(5947–5957)
Energy & Fuels 23 #12 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
60.
The Engineering Economist 54 #4 (2009)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
61.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
62.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
63.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
64.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
65.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
66.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
67.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
68.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
67.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
70.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Roger D.
Corneliussen
Editor
Telephone: 610 883 0055
rcorneliussen@4spe.org
www.maropolymeronline.com
Copyright 2009 by Roger D. Corneliussen