Copyright 2009 by Roger D. Corneliussen
Below are links to the new articles by journals. A click should take you to the journal website. This is a great variation in where one ends up. In some cases, a click will take you to the issue in other cases a click will take you to the website and you must do a few more clicks to get to the issue. This is controlled by the publisher and not Maro. Fortunately, with a little practice, this should not be a serious problem. (RDC)
Polymer
Track (News)
Updated daily
Week 52 (12/21-12/25)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
01.
Accounts of
Chemical Research 42 #12 (2009)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
02.
Advanced Functional Materials 19 #24 (2009)
(Titles and Abstracts)
Intrinsic Surface Dipoles Control the Energy
Levels of Conjugated Polymers
(p 3874-3879)
Advanced Functional Materials 19 #24 (2009)
Abstract
Microstructural Engineering of Hydroxyapatite
Membranes to Enhance Proton Conductivity
(p 3941-3947)
Advanced Functional Materials 19 #24 (2009)
Abstract
Photochromic Polymers Based on the Photoinduced
Opening and Thermal Closing of [1,3]Oxazine Rings
(p 3956-3961)
Advanced Functional Materials 19 #24 (2009)
Abstract
Specific Functionalization of Carbon Nanotubes
for Advanced Polymer Nanocomposites
(p 3962-3971)
Advanced Functional Materials 19 #24 (2009)
Abstract
Multifunctional Fluorene-Based Oligomers with
Novel Spiro-Annulated Triarylamine: Efficient, Stable Deep-Blue
Electroluminescence, Good Hole Injection, and Transporting Materials with Very
High Tg
(p 3987-3995)
Advanced Functional Materials 19 #24 (2009)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
03.
Advanced Materials 21 #48 (2009)
(Titles and Abstracts)
Small-Molecule End-Groups of Linear Polymer
Determine Cell-type Gene-Delivery Efficacy
(p 4947-4951)
Advanced Materials 21 #48 (2009)
Abstract
A Versatile Synthetic Extracellular Matrix Mimic
via Thiol-Norbornene Photopolymerization
(p 5005-5010)
Advanced Materials 21 #48 (2009)
Abstract
Repairing Polymers Using Oscillating Magnetic
Field
(p 5011-5015)
Advanced Materials 21 #48 (2009)
Abstract
Characterization of Quantum Dot/Conducting
Polymer Hybrid Films and Their Application to Light-Emitting Diodes
(p 5022-5026)
Advanced Materials 21 #48 (2009)
Abstract
*************************************************
Advanced Materials 22 #1 (2010)
(Titles and Abstracts)
Perfluoropolymer Surface for Shock-free
Homeotropic Alignment of Smectic Liquid Crystals
(p 34-38)
Advanced Materials 22 #1 (2010)
Abstract
High-Modulus Organic Glasses Prepared by Physical
Vapor Deposition
(p 39-42)
Advanced Materials 22 #1 (2010)
Abstract
Simultaneous red-green-blue reflection and
wavelength tuning from an achiral liquid crystal and a polymer template
(p 53-56)
Advanced Materials 22 #1 (2010)
Abstract
Low-Voltage Ring Oscillators Based on
Polyelectrolyte-Gated Polymer Thin-Film Transistors
(p 72-76)
Advanced Materials 22 #1 (2010)
Abstract
Site Isolation in Phosphorescent Bichromophoric
Block Copolymers Designed for White Electroluminescence
(p 77-82)
Advanced Materials 22 #1 (2010)
Abstract
Rational Optimization of Benzo[2,1-b;3,4-b
]dithiophene-Containing
Polymers for Organic Field-Effect Transistors
(p 83-86)
Advanced Materials 22 #1 (2010)
Abstract
Vacuum-Assisted Aerosol Deposition of a
Low-Dielectric-Constant Periodic Mesoporous Organosilica Film
(p 99-102)
Advanced Materials 22 #1 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
04.
Archive of Applied
Mechanics 80
#2 (2010)
(Titles
and Abstracts)
Buckling and postbuckling of a compressed thin film bonded on a soft elastic
layer: a three-dimensional analysis
(175-188)
Archive of Applied Mechanics 80 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
05.
Chemical Vapor Deposition 15, #10-12 (2009)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
06.
Chemical
Week
Titles and Abstracts) Weekly (H)
Trade
Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
07.
Applied Catalysis A: General 373 #1-2 (2010)
Titles and Abstracts
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
08.
Coatings
World
13 #12 (2009)
(Titles, Abstracts and Articles)
Trade Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
09.
Color
Research & Application
35 #1 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
10.
Composites Part A: Applied Science and Manufacturing 41 #2 (2010)
(Titles and Abstracts)
Properties of silane grafted polypropylene/montmorillonite
nanocomposites
(185-191)
Composites Part A: Applied Science and Manufacturing 41 #2 (2010)
Physico-mechanical properties of chemically
treated coir reinforced polypropylene composites
(192-198)
Composites Part A: Applied Science and Manufacturing 41 #2 (2010)
Characterization of membranes used in pressure
driven composite processing
(207-214)
Composites Part A: Applied Science and Manufacturing 41 #2 (2010)
Enhanced thermal conductivity of epoxy
nanocomposites filled with hybrid filler system of triethylenetetramine-functionalized
multi-walled carbon nanotube/silane-modified nano-sized silicon carbide
(215-221)
Composites Part A: Applied Science and Manufacturing 41 #2 (2010)
Carbon nanotube yarn and 3-D braid composites.
Part I: Tensile testing and mechanical properties analysis
(230-237)
Composites Part A: Applied Science and Manufacturing 41 #2 (2010)
Computationally efficient pseudo-viscoelastic
models for evaluation of residual stresses in thermoset polymer composites
during cure
(247-256)
Composites Part A: Applied Science and Manufacturing 41 #2 (2010)
Structural collapse of a wind turbine blade.
Part A: Static test and equivalent single layered models
(257-270)
Composites Part A: Applied Science and Manufacturing 41 #2 (2010)
Structural collapse of a wind turbine blade.
Part B: Progressive interlaminar failure models
(271-283)
Composites Part A: Applied Science and Manufacturing 41 #2 (2010)
Anisotropic and tension–compression asymmetric
model for composites consolidation
(284-294)
Composites Part A: Applied Science and Manufacturing 41 #2 (2010)
Risk reduction in composites processing using
prototype data, process simulation, and Bayesian statistics
(295-303)
Composites Part A: Applied Science and Manufacturing 41 #2 (2010)
Hybrid bio-composite from talc, wood fiber and
bioplastic: Fabrication and characterization
(304-312)
Composites Part A: Applied Science and Manufacturing 41 #2 (2010)
A constitutive model of particulate-reinforced
composites taking account of particle size effects and damage evolution
(313-321)
Composites Part A: Applied Science and Manufacturing 41 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
11.
e-Polymers (12/22/2009) (140)
(Titles, Abstracts and Articles)
138[2009] Polyamide/layered
silicate nanocomposites: A correlation between fracture toughness and molecular
mobility
Jiri Kotek*, Ivan Kelnar, Jiri Brus, Martina Urbanova
[Abstract]
139[2009] Elaboration of
stimuli responsive core-shell magnetic latexes from oil in water ferrofluid
emulsion
e-Polymers (12/22/2009)
(140)
[Abstract]
140[2009] Study of
rheological behaviours of electrostatic thermoset powder coatings
e-Polymers (12/22/2009)
(140)
[Abstract]
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
12.
European Coatings, December (2009)
(Titles, Abstracts and Articles)
Trade
Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
13.
Fire
Technology
46 #1 (2010)
(Titles and Abstracts) S
A New Method to Analyze the Membrane Action of Composite Floor Slabs in Fire
Condition
(3-18)
Fire Technology 46 #1 (2010)
A Simple Method to Predict Temperatures in Steel Joints with Partial Intumescent
Coating Fire Protection
(19-35)
Fire Technology 46 #1 (2010)
Ultimate Behavior of Idealized Composite Floor Elements at Ambient and Elevated
Temperature
(67-89)
Fire Technology 46 #1 (2010)
Experimental Testing and Analytical Prediction of the Behaviour of Timber Bolted
Connections Subjected to Fire
(129-148)
Fire Technology 46 #1 (2010)
Experimental and Numerical Analysis of Gypsum Plasterboards in Fire
(149-167)
Fire Technology 46 #1 (2010)
Assessment of Eurocode 5 Charring Rate Calculation Methods
(169-181)
Fire Technology 46 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
14.
Journal of Materials
Science 45 #1(2010)
(Titles and Abstracts) (H)
Review: current international research into cellulose nanofibres and
nanocomposites
(1-33) Journal
of Materials Science 45 #1(2010)
Chlorinated polyethylene nanocomposites: thermal and mechanical behavior
(64-73) Journal
of Materials Science 45 #1(2010)
Comparison of the influence of copper micro- and nano-particles on the
mechanical properties of polyethylene/copper composites
(82-88) Journal
of Materials Science 45 #1(2010)
Effect of silver nanoparticles content on the various properties of
nanocomposite hydrogels by in situ polymerization
(89-97) Journal
of Materials Science 45 #1(2010)
Swelling and crystallization behaviors of absorptive functional fiber based on
butyl methacrylate/hydroxyethyl methacrylate copolymer
(98-105) Journal
of Materials Science 45 #1(2010)
High-temperature pyrolysis of ceramic fibers derived from polycarbosilane–polymethylhydrosiloxane
polymer blends with porous structures
(139-145) Journal
of Materials Science 45 #1(2010)
Elastic properties of thermoplastic elastomers based on poly(tetramethylene
oxide) and monodisperse amide segments
(158-167) Journal
of Materials Science 45 #1(2010)
Synthesis and characterization of chiral liquid crystal polymers containing
donor–acceptor group
(201-208) Journal
of Materials Science 45 #1(2010)
Modeling of the compression of coated papers in a soft rolling nip
(216-226) Journal
of Materials Science 45 #1(2010)
Pyrolysis of aluminium loaded polymethylsiloxanes: the influence of Al/PMS ratio
on mullite formation
(233-241) Journal
of Materials Science 45 #1(2010)
Electrical properties of flash-evaporated carbon nanolayers on PTFE
(279-281) Journal
of Materials Science 45 #1(2010)
*************************************************
Journal of Materials
Science 45 #2(2010)
(Titles and Abstracts) (H)
A semi-empirical unified model of strain fatigue life for insulation plastics
(326-333)
Journal of Materials Science 45 #2(2010)
Effects of hydrothermal aging on glass–fiber/polyetherimide (PEI) composites
(399-404)
Journal of Materials Science 45 #2(2010)
Luminescence analysis of Eu complexes containing diphenanthryl β-diketone
ligands doped silicone rubber
(405-408)
Journal of Materials Science 45 #2(2010)
Transport of methyl methacrylate monomer through natural rubber
(409-417)
Journal of Materials Science 45 #2(2010)
Fabrication of poly(methyl methacrylate) microsphere added pressure-sensitive
adhesives and their physical characteristics
(429-434)
Journal of Materials Science 45 #2(2010)
Stilbene-based liquid crystalline and photocrosslinkable polynaphthylphosphate
esters
(435-442)
Journal of Materials Science 45 #2(2010)
A first principles investigation of isotactic polypropylene
(443-447)
Journal of Materials Science 45 #2(2010)
Analysis of the essential work of fracture method as applied to UHMWPE
(448-459)
Journal of Materials Science 45 #2(2010)
Novel superhydrophobic and highly oleophobic PFPE-modified silica nanocomposite
(460-466)
Journal of Materials Science 45 #2(2010)
Mechanism of dispersing an active component into a polymeric carrier by the SEDS-PA
process
(467-474)
Journal of Materials Science 45 #2(2010)
Electrochemical and morphological studies of an electroactive material derived
from 3-hydroxyphenylacetic acid: a new matrix for oligonucleotide hybridization
(475-482)
Journal of Materials Science 45 #2(2010)
High conductivity and low percolation threshold in polyaniline/graphite
nanosheets composites
(483-489)
Journal of Materials Science 45 #2(2010)
Influence of reactive compatibilizers on the rheometrical and mechanical
properties of PA6/LDPE and PA6/HDPE blends
(496-502)
Journal of Materials Science 45 #2(2010)
The morphology and phase mixing studies on poly(ester–urethane) during shape
memory cycle
(511-522)
Journal of Materials Science 45 #2(2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
15.
Journal of Polymers and the Environment
17 #2 (2009)
(Titles and Abstracts)
Effects of Saturated Acids on Physical Properties of UPE Resins Prepared from
Recycled PET Products
(65-70)
Journal of Polymers and the Environment 17 #2 (2009)
Evaluation of the Biodegradability of Polyvinyl Alcohol/Starch Blends: A
Methodological Comparison of Environmentally Friendly Materials
(71-82)
Journal of Polymers and the Environment 17 #2 (2009)
Effect of Matrix–Particle Interfacial Adhesion on the Mechanical Properties of
Poly(lactic acid)/Wood-Flour Micro-Composites
(83-94)
Journal of Polymers and the Environment 17 #2 (2009)
Removal of Linear and Branched p-Alkylphenols from Aqueous Solution by
Combined Use of melB Tyrosinase and Chitosan Beads
(95-102)
Journal of Polymers and the Environment 17 #2 (2009)
Solvent-Free Polymerization of
l-Aspartic Acid in
the Presence of d-Sorbitol
to Obtain Water Soluble or Network Copolymers
(103-108)
Journal of Polymers and the Environment 17 #2 (2009)
Mechanical and Thermal Properties of Bamboo Microfibril Reinforced
Polyhydroxybutyrate Biocomposites
(109-114)
Journal of Polymers and the Environment 17 #2 (2009)
Compatible Blends of Zein and Polyvinylpyrrolidone
(115-122)
Journal of Polymers and the Environment 17 #2 (2009)
Polyacetal Polyols for Polyurethanes
(123-130)
Journal of Polymers and the Environment 17 #2 (2009)
Feather Fiber Reinforced Light-Weight Composites with Good Acoustic Properties
(131-142)
Journal of Polymers and the Environment 17 #2 (2009)
Lignocellulosic Fiber-Reinforced Keratin Polymer Composites
(143-151)
Journal of Polymers and the Environment 17 #2 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
16.
Journal of Polymer Science Part A: Polymer Chemistry 48 #3 (2010)
(Titles and Abstracts) (H)
From polymeric particles to multifunctional
nanocapsules for biomedical applications using the miniemulsion process
(p 493-515) Journal
of Polymer Science Part A: Polymer Chemistry 48 #3 (2010)
Abstract
Synthesis of thermal-stable and
photo-crosslinkable polyfluorenes for the applications of polymer light-emitting
diodes
(p 516-524) Journal
of Polymer Science Part A: Polymer Chemistry 48 #3 (2010)
Abstract
Synthesis of refractive star-shaped polysulfide
by anionic polymerization of phenoxy propylene sulfide using an initiating
system consisting of trifunctional thiol derived from five-membered cyclic
dithiocarbonate and amine
(p 525-531) Journal
of Polymer Science Part A: Polymer Chemistry 48 #3 (2010)
Abstract
Preparation of molecularly imprinted polymers via
atom transfer radical 
bulk
polymerization
(p 532-541) Journal
of Polymer Science Part A: Polymer Chemistry 48 #3 (2010)
Abstract
Synthesis of magnetic, reactive, and
thermoresponsive Fe3O4
nanoparticles via surface-initiated RAFT copolymerization of N-isopropylacrylamide
and acrolein
(p 542-550) Journal
of Polymer Science Part A: Polymer Chemistry 48 #3 (2010)
Abstract
Photoresponsive nanocarriers based on PAMAM
dendrimers with a o-nitrobenzyl shell
(p 551-557) Journal
of Polymer Science Part A: Polymer Chemistry 48 #3 (2010)
Abstract
A green epoxidation system with
poly(4-vinylpyridine) microsphere-supported molybdenum catalyst
(p 558-562) Journal
of Polymer Science Part A: Polymer Chemistry 48 #3 (2010)
Abstract
Preparation and characterization of a
poly(vinylbenzyl sulfonic acid)-grafted FEP membrane
(p 563-569) Journal
of Polymer Science Part A: Polymer Chemistry 48 #3 (2010)
Abstract
Kinetic study of the polymerization of aromatic
polyurethane prepolymers by high-throughput experimentation
(p 570-580) Journal
of Polymer Science Part A: Polymer Chemistry 48 #3 (2010)
Abstract
Synthesis and characterization of physical
crosslinking systems based on cyclodextrin inclusion/host-guest complexation
(p 581-592) Journal
of Polymer Science Part A: Polymer Chemistry 48 #3 (2010)
Abstract
Synthesis of oily core-hybrid shell nanocapsules
through interfacial free radical copolymerization in miniemulsion: Droplet
formation and nucleation
(p 593-603) Journal
of Polymer Science Part A: Polymer Chemistry 48 #3 (2010)
Abstract
Kinetic model of reversible
addition-fragmentation chain transfer polymerization in microemulsions
(p 604-613) Journal
of Polymer Science Part A: Polymer Chemistry 48 #3 (2010)
Abstract
Poly(3-hexylthiophene)-b-poly(3-cyclohexylthiophene):
Synthesis, microphase separation, thin film transistors, and photovoltaic
applications
(p 614-626) Journal
of Polymer Science Part A: Polymer Chemistry 48 #3 (2010)
Abstract
Thermoresponsive fluorescent water-soluble
copolymers containing BODIPY dye: Inhibition of H-aggregation of the BODIPY
units in their copolymers by LCST
(p 627-634) Journal
of Polymer Science Part A: Polymer Chemistry 48 #3 (2010)
Abstract
Synthesis and properties of phenothiazylene
vinylene-based polymers: New organic semiconductors for field-effect transistors
and solar cells
(p 635-646) Journal
of Polymer Science Part A: Polymer Chemistry 48 #3 (2010)
Abstract
Thermoresponsive PPEGMEA-g-PPEGEEMA
well-defined double hydrophilic graft copolymer synthesized by successive
SET-LRP and ATRP
(p 647-655) Journal
of Polymer Science Part A: Polymer Chemistry 48 #3 (2010)
Abstract
Synthesis of highly refractive and transparent
polyimides derived from 4,4-thiobis[2
,6-dimethyl-4-(p-phenylenesulfanyl)aniline]
(p 656-662) Journal
of Polymer Science Part A: Polymer Chemistry 48 #3 (2010)
Abstract
Oxygen-sensing properties of
5,10,15,20-tetraphenylporphinato platinum(II) and palladium(II) covalently bound
on poly(isobutyl-co-2,2,2-trifluoroethyl methacrylate)
(p 663-670) Journal
of Polymer Science Part A: Polymer Chemistry 48 #3 (2010)
Abstract
Macrocyclization of polymers via ring-closing
metathesis and azide/alkyne-click-reactions:
An approach to cyclic polyisobutylenes
(p 671-680) Journal
of Polymer Science Part A: Polymer Chemistry 48 #3 (2010)
Abstract
Unimolecular micelle derived from hyperbranched
polyethylenimine with well-defined hybrid shell of poly(ethylene oxide) and
polystyrene: A versatile nanocapsule
(p 681-691) Journal
of Polymer Science Part A: Polymer Chemistry 48 #3 (2010)
Abstract
Polyethylene/graphite nanocomposites obtained by
in situ polymerization
(p 692-698) Journal
of Polymer Science Part A: Polymer Chemistry 48 #3 (2010)
Abstract
The relationship between catalyst precursors and
chain end groups in homogeneous propene polymerization catalysis
(p 699-708) Journal
of Polymer Science Part A: Polymer Chemistry 48 #3 (2010)
Abstract
Synthesis and thermoreversible gelation of
dendron-like polypeptide/linear poly(
-caprolactone)/dendron-like
polypeptide triblock copolymers
(p 709-718) Journal
of Polymer Science Part A: Polymer Chemistry 48 #3 (2010)
Abstract
Specific lectin interactions and
temperature-induced reversible gels in novel water-soluble glycopolymers bearing
maltotrionolactone pendant groups
(p 719-729)
Abstract
Self-assembled dendron nanotubes: Surface
functionalization with maltosyl units and their reversible complexation with
Concanavalin A
(p 730-734) Journal
of Polymer Science Part A: Polymer Chemistry 48 #3 (2010)
Abstract
ATRP of 2-vinylpyridine and tert-butyl
acrylate mixtures giving precursors of polyampholytes
(p 735-741) Journal
of Polymer Science Part A: Polymer Chemistry 48 #3 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
17.
Journal of Polymer Science B: Polymer Physics 48, #3 (2010)
(Titles and Abstracts)
Nanostructure and mechanical properties studied
during dynamical straining of microfibrillar reinforced HDPE/PA blends
(p 237-250)
Journal of Polymer Science B: Polymer Physics 48, #3 (2010)
Abstract
Effect of dispersed phase composition on
morphological and mechanical properties of PET/EVA/PP ternary blends
(p 251-259)
Journal of Polymer Science B: Polymer Physics 48, #3 (2010)
Abstract
Synthesis and performance of proton conducting
chitosan/NH4Cl electrolyte
(p 260-266)
Journal of Polymer Science B: Polymer Physics 48, #3 (2010)
Abstract
Effect of chain entanglements on plastic
deformation behavior of ultra-high molecular weight polyethylene
(p 276-285)
Journal of Polymer Science B: Polymer Physics 48, #3 (2010)
Abstract
Melt crystallization and morphology of poly(-caprolactone)-poly(ethylene
glycol) diblock copolymers with different compositions and molecular weights
(p 286-293)
Journal of Polymer Science B: Polymer Physics 48, #3 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
18.
Journal of
Reinforced Plastics and Composites 28 #24 (2009)
(Titles and Abstracts)
Effects of Wood Preheat Treatment on Thermal Stability
of HDPE Composites
(2945-2955) Journal
of Reinforced Plastics and Composites 28 #24 (2009)
[Abstract]
Fatigue Crack Growth Behavior of Filament Wound
Composite Pipes in Corrosive Environment
(2957-2970) Journal
of Reinforced Plastics and Composites 28 #24 (2009)
[Abstract]
Experimental Investigation of Recron3s Fiber-reinforced
Hybrid Ferrocement Hollow Slabs
(2971-2982) Journal
of Reinforced Plastics and Composites 28 #24 (2009)
[Abstract]
Phase Behavior and Thermal Properties of Polypropylene
In Situ Reinforced with Liquid Crystalline Polymer and rPET
(2983-2998.)
Two-body Abrasive Wear Behavior of Nano-clay Filled
LDPE/EVA Composites
( 2999-3007) Journal
of Reinforced Plastics and Composites 28 #24 (2009)
Influence of Multilayer vdW Interaction on Torsional
Buckling of Multi-walled Carbon Nanotube under Thermal Fields
(3009-3020) Journal
of Reinforced Plastics and Composites 28 #24 (2009)
An Experimental Study on Energy Absorption Behavior of
Polyurethane Foams
(3021-3026) Journal
of Reinforced Plastics and Composites 28 #24 (2009)
[Abstract]
The Influence of Fiber Treatment on the Performance of
Bagasse Fiber-Reinforced Polymer Composite
(3027-3036) Journal
of Reinforced Plastics and Composites 28 #24 (2009)
[Abstract]
Influence of Rigid Inserts on Shear Modulus and
Strength of Sandwich Beams with Polyurethane Foam as Core
(3037-3047) Journal
of Reinforced Plastics and Composites 28 #24 (2009)
[Abstract]
The Effect of Silane Coupling Agent on Mechanical
Properties of Feldspar Filled Polypropylene Composites
(3049-3060) Journal
of Reinforced Plastics and Composites 28 #24 (2009)
[Abstract]
Investigation on Composite Coating of Low Grade
Minerals
(3061-3067) Journal
of Reinforced Plastics and Composites 28 #24 (2009)
[Abstract]
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
19.
Modern
Plastics
(2009)
(Titles and Abstracts)
Weekly
Trade
Magazine
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
20.
Nanotechnology 21 #4 (2010)
(Titles and Abstracts; Full PDF versions of Articles are available free
for 30 days after publication)
Antioxidant activity and haemolysis prevention
efficiency of polyaniline nanofibers
(#045101)
Nanotechnology 21 #4 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
21.
Plastics Europe #12 (2009)
English version of Kunststoffe
(Titles
and Abstracts) Some, not all, articles are available without charge
Trade
Journal
Colored Brushes in Flying Molds
Shuttle Molding
(6-9)
Plastics Europe #12 (2009) English version of Kunststoffe
The Composites Market in Europe 2008/2009
Market Prospects
(10-12)
Plastics Europe #12 (2009) English version of Kunststoffe
Getting Innovations onto the Road Faster
(14-16)
Plastics Europe #12 (2009) English version of Kunststoffe
The EU Waste Framework Directive and Its Effects
Recycling
(18-20)
Plastics Europe #12 (2009) English version of Kunststoffe
Idea Thieves in the Media Pillory
Product Protection
(21-22)
Plastics Europe #12 (2009) English version of Kunststoffe
Blasting Product Pirates with Laser Cannons
Product Protection
(23-25)
Plastics Europe #12 (2009) English version of Kunststoffe
Faster Part Removal
Software
(26-27)
Plastics Europe #12 (2009) English version of Kunststoffe
Savings with a Single Screw
Energy Efficiency
(28-32)
Plastics Europe #12 (2009) English version of Kunststoffe
Constant Dripping
Watering Technique
(33-34)
Plastics Europe #12 (2009) English version of Kunststoffe
Flat Sheet from PET Bottles
Direct Processing
(35-36)
Plastics Europe #12 (2009) English version of Kunststoffe
Mirrors for Electromagnetic Waves
Modified Materials
(37-40)
Plastics Europe #12 (2009) English version of Kunststoffe
Enhanced Thermal Conductivity
Nanoscale Fillers
(41-47)
Plastics Europe #12 (2009) English version of Kunststoffe
From Commodity to Specialty
Styrenic Polymers
(48-50)
Plastics Europe #12 (2009) English version of Kunststoffe
One Step Instead of Three
Modified PTFE
(51-53)
Plastics Europe #12 (2009) English version of Kunststoffe
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
22.
Polymer Bulletin 64 #2 (2010)
(Titles
and Abstracts)
Room temperature preparation of highly crosslinked microgels
(107-114)
Polymer Bulletin 64 #2 (2010)
Preparation and structural properties of Fe3O4–polyimide
hybrid nanocomposites
(115-126)
Polymer Bulletin 64 #2 (2010)
Synthesis and characterization of novel polyamides derived from
1,4-bis((4-amino-2-(trifluoromethyl)phenoxy)methyl)cyclohexane and aromatic
dicarboxylic acids
(127-140)
Polymer Bulletin 64 #2 (2010)
Lipase immobilized on poly (vinyl alcohol) modified polysulfone membrane:
application in hydrolytic activities for olive oil
(141-158)
Polymer Bulletin 64 #2 (2010)
Graft copolymers of poly(methyl methacrylate) and polyamide-6 via in situ
anionic polymerization of ε-caprolactam and their properties
(159-169)
Polymer Bulletin 64 #2 (2010)
Preparation and characterization of poly(acrylic acid)/pillared clay
superabsorbent composite
(171-183)
Polymer Bulletin 64 #2 (2010)
Fracture surface characteristics and impact properties of poly(butylene
terephthalate)
(185-196)
Polymer Bulletin 64 #2 (2010)
The effect of polypropylene/polyamide 66 blending modification on melt strength
and rheologic behaviors of polypropylene
(197-207)
Polymer Bulletin 64 #2 (2010)
**************************************************
Polymer Bulletin 64 #3 (2010)
(Titles
and Abstracts)
Effects of monomer and ether structure on metal-free living cationic
polymerization of various vinyl ethers using hydrogen chloride with ether
(209-220)
Polymer Bulletin 64 #3 (2010)
Polypropylene nanocomposites using metallocene catalysts supported on commercial
organophilic clays
(221-231)
Polymer Bulletin 64 #3 (2010)
Fe(III)-catalyzed AGET ATRP of styrene using triphenyl phosphine as ligand
(233-244)
Polymer Bulletin 64 #3 (2010)
Microstructure of methyl methacrylate/tert-butyl acrylate copolymer
characterized by 13C NMR spectroscopy
(259-273)
Polymer Bulletin 64 #3 (2010)
Supermolecular structure of wood/polypropylene composites: I. The influence of
processing parameters and chemical treatment of the filler
(275-290)
Polymer Bulletin 64 #3 (2010)
Dynamic rheology–morphology relationship of PP/EPDM blends prepared by melt
mixing under Sc-CO2
(291-302)
Polymer Bulletin 64 #3 (2010)
Optimization of synthesis parameters in interfacial polycondensation using
design of experiments
(303-314)
Polymer Bulletin 64 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
23.
Polymer - Plastics Technology and Engineering 49 #1 (2010)
(Titles and Abstracts)
Surface Plasma Modification of LLDPE for Biomedical Applications
(1 – 7)
Polymer - Plastics Technology and Engineering 49 #1 (2010)
Three-Body Abrasive Wear Behaviour of Polymer Matrix Composites Filled with SiC
Particles
(8 – 12)
Polymer - Plastics Technology and Engineering 49 #1 (2010)
Compressive and Thermal Properties of Recycled EPS Foams
(13 – 19)
Polymer - Plastics Technology and Engineering 49 #1 (2010)
The TPB Properties of Plasma-Treated Carbon Fiber-Reinforced Polystyrene
Composites
(20 – 23)
Polymer - Plastics Technology and Engineering 49 #1 (2010)
The Preparation of Malefic Anhydride Modified Polyethylene via in-situ
Chlorinating Graft Copolymerization
(24 – 31)
Polymer - Plastics Technology and Engineering 49 #1 (2010)
Optimization of Residual Stresses in the Surface Regions of Injection Moldings
(32 – 37)
Polymer - Plastics Technology and Engineering 49 #1 (2010)
Effect of Nano-CaCO3 on Mechanical and Thermal Properties of
Polyamide Nanocomposites
(38 – 44)
Polymer - Plastics Technology and Engineering 49 #1 (2010)
Studies on Water Absorption of Bamboo-Polyester Composites: Effect of Silane
Treatment of Mercerized Bamboo
(45 – 52)
Polymer - Plastics Technology and Engineering 49 #1 (2010)
Study on Injection Molding Parameters for Thin-Shell Plastic Parts Using a
Neural Network–Based Approach
(53 – 61)
Polymer - Plastics Technology and Engineering 49 #1 (2010)
Mechanical, Morphological and Thermal Properties of Polycarbonate/SEBS-G-MA/Montmorillonite
Nanocomposites
(62 – 68)
Polymer - Plastics Technology and Engineering 49 #1 (2010)
Investigation of Scale Mitigation and Sequestering Properties of Some
Polyelectrolytes
(69 – 73)
Polymer - Plastics Technology and Engineering 49 #1 (2010)
Thermal Stability of Lubricating Oil Additives Based on Styrene and n-Alkyl
Methacrylate Terpolymers
(74 – 77)
Polymer - Plastics Technology and Engineering 49 #1 (2010)
A Decorative Construction Material Prepared by Making Use of Marble Waste
Granules and PMMA/SiO2 Nanocomposites
(78 – 82)
Polymer - Plastics Technology and Engineering 49 #1 (2010)
Kinetics and Thermodynamics of Neutral Hydrolytic Depolymerization of
Polyurethane Foam Waste Using Different Catalysts at Higher Temperature and
Autogenious Pressures
(83 – 89)
Polymer - Plastics Technology and Engineering 49 #1 (2010)
Fabrication and Characterization of Microencapsulated Phase Change Material with
Large Diameter Range
(90 – 94)
Polymer - Plastics Technology and Engineering 49 #1 (2010)
A Novel Absorptive Functional Fiber Copolymerized by Butyl Methacrylate with
Hydroxyethyl Methacrylate: Preparation and Characterization
(95 – 103)
Polymer - Plastics Technology and Engineering 49 #1 (2010)
Synthesis and Characterization of MRI-Detectable Magnetic Dendritic Nanocarriers
(104 – 109)
Polymer - Plastics Technology and Engineering 49 #1 (2010)
Effects of Dynamic Vulcanization on Tensile Properties, Morphology and Natural
Weathering of Polypropylene/Recycled Acrylonitrile Butadiene Rubber (PP/NBRr)
Blends
(110 – 119)
Polymer - Plastics Technology and Engineering 49 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
24.
Engineering Failure Analysis 17 #1 (2010)
(Titles
and Abstracts)
Fracture behaviour of thermosetting polymers
for ophthalmic lenses
(4-10)
Engineering Failure Analysis 17 #1 (2010)
Repair of composite structures on Formula 1 race cars
(70-82)
Engineering Failure Analysis 17 #1 (2010)
Formula 1 Composites Engineering
(92-115)
Engineering Failure Analysis 17 #1 (2010)
Development of penetration resistance in the
survival cell of a Formula 1 racing car
(116-127)
Engineering Failure Analysis 17 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
25.
Engineering Fracture Mechanics 77 #1 (2010)
(Titles and Abstracts)
Inelastic fracture of adhesively bonded overlap
joints
(1-21)
Engineering Fracture Mechanics 77 #1 (2010)
Mode I and II fracture behavior of
adhesively-bonded pultruded composite joints
(128-143)
Engineering Fracture Mechanics 77 #1 (2010)
Mixed-mode I/II wood fracture characterization
using the mixed-mode bending test
(144-152)
Engineering Fracture Mechanics 77 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
26.
Engineering Optimization 42 #1 (2010)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
27.
Environmental Claims Journal 21 #4 (2009)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
28.
The
Environmentalist
29 #4 (2009)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
29. Environmental
Science & Technology 43 #24 (2009)
(Titles
and Abstracts)
Current-Use Brominated Flame Retardants in Water, Sediment, and Fish from
English Lakes
(9077–9083)
Environmental Science & Technology 43 #24 (2009)
Estimated 2017 Refrigerant Emissions of 2,3,3,3-tetrafluoropropene (HFC-1234yf)
in the United States Resulting from Automobile Air Conditioning
(9252–9259)
Environmental Science & Technology 43 #24 (2009)
Development and Validation of Chemical and Biological Analyses to Determine the
Antiestrogenic Potency of Resin Acids in Paper Mill Effluents
(9300–9305)
Environmental Science & Technology 43 #24 (2009)
Leaching of Biocides Used in Façade Coatings under Laboratory Test Conditions
(9321–9328)
Environmental Science & Technology 43 #24 (2009)
Role of Gelling Soluble and Colloidal Microbial Products in Membrane Fouling
(9341–9347)
Environmental Science & Technology 43 #24 (2009)
Sensitivity Analysis of the Pressure-Based Direct Integrity Test for Membranes
Used in Drinking Water Treatment
(9419–9424)
Environmental Science & Technology 43 #24 (2009)
Life-Cycle Case Study Comparison of Permeable Reactive Barrier versus
Pump-and-Treat Remediation
(9432–9438)
Environmental Science & Technology 43 #24 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
30.
European Journal of Physics 31 #1
(2010)
(Titles
and Abstracts; Full PDF versions of Articles are available free for 30 days after
publication)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
31.
Faraday Discussions #144 (2008)
(Titles
and Abstracts)
Fine-graining without coarse-graining: an easy and fast way to equilibrate dense
polymer melts
(25 - 42)
Faraday Discussions #144 (2008)
Mesoscale modelling of polyelectrolyte electrophoresis
(57 - 70)
Faraday Discussions #144 (2008)
Kinetic Monte Carlo simulations of flow-induced nucleation in polymer melts
(71 - 92)
Faraday Discussions #144 (2008)
Simulations of theoretically informed coarse grain models of polymeric systems
(111 - 125)
Faraday Discussions #144 (2008)
Phase behavior of low-functionality, telechelic star block copolymers
(143 - 157)
Faraday Discussions #144 (2008)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
32.
Fatigue & Fracture of Engineering Materials and Structures 33 #1 (2010)
(Title
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
33.
Ferroelectrics 393
(Titles
and Abstracts)
Electromechanical Coupling in the Novel 2–2 Parallel-Connected PMN–0.33PT
Single-Domain Crystal/Polymer Composite
\(27 – 37)
Ferroelectrics 393
The Influence of Individual Phases on Piezoelectric Coefficient of PZT-PVdF
Composites
(88 – 93)
Ferroelectrics 393
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
34. Ferroelectrics
Letters Section 36 #5&6 (2009)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
35.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
36.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
37.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
38.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
39.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
40.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
41.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
42.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
43.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
44.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
45.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
46.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
47.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
48.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
49.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
50.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
51.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
52.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
53.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
54.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
55.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
56.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
57.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
58.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
59.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
60.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
61.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
62.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
63.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
64.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
65.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
66.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
67.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
68.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
67.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
70.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Roger D.
Corneliussen
Editor
Telephone: 610 883 0055
rcorneliussen@4spe.org
www.maropolymeronline.com
Copyright 2009 by Roger D. Corneliussen