Copyright 2009 by Roger D. Corneliussen
Below are links to the new articles by journals. A click should take you to the journal website. This is a great variation in where one ends up. In some cases, a click will take you to the issue in other cases a click will take you to the website and you must do a few more clicks to get to the issue. This is controlled by the publisher and not Maro. Fortunately, with a little practice, this should not be a serious problem. (RDC)
Polymer
Track (News)
Updated daily
Week 1 (1/4-1/8)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
01.
Accreditation and Quality Assurance 15, #1 (2010)
(Titles and Abstracts)
International comparison of the determination of the mass fraction of cadmium,
chromium, mercury and lead in polypropylene: the Comité Consultatif pour la
Quantité de Matière pilot study CCQM-P106
(39-44) Accreditation
and Quality Assurance 15, #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
02.
Additives
for Polymers
2009 #12 (2009)
(Titles
only)
Trade Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
03.
Advanced
Engineering Materials 11 #12 (2009)
(Titles and Abstracts)
Cytotoxicity and Cell Cycle Effects of Bare and
Poly(vinyl alcohol)-Coated Iron Oxide Nanoparticles in Mouse Fibroblasts
(p B243-B250)
Advanced Engineering Materials 11 #12 (2009)
Abstract
Neurite Outgrowth on Nanocomposite Scaffolds
Synthesized from PLGA and Carboxylated Carbon Nanotubes
(p B261-B266)
Advanced Engineering Materials 11 #12 (2009)
Abstract
Synthesis, Characterization and Drug Release
Behavior of pH-Responsive O-carboxymethyl Chitosan-graft-poly(N-vinylpyrrolidone)
Hydrogel Beads
(p B267-B274)
Advanced Engineering Materials 11 #12 (2009)
Abstract
Li-Metal Symmetrical Cell Studies Using Ionic
Organic Plastic Crystal Electrolyte
(p 1044-1048)
Advanced Engineering Materials 11 #12 (2009)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
04.
Advanced Functional Materials 20 #1 (2010)
(Titles and Abstracts)
Foldable Printed Circuit Boards on Paper
Substrates
(p 28-35) Advanced
Functional Materials 20 #1 (2010)
Abstract
Light-Triggered Self-Assembly of a
Spiropyran-Functionalized Dendron into Nano-/Micrometer-Sized Particles and
Photoresponsive Organogel with Switchable Fluorescence
(p 36-42) Advanced
Functional Materials 20 #1 (2010)
Abstract
Polyphenylene Dendrimer-Templated In Situ
Construction of Inorganic-Organic Hybrid Rice-Shaped Architectures
(p 43-49) Advanced
Functional Materials 20 #1 (2010)
Abstract
Variations in Hole Injection due to Fast and Slow
Interfacial Traps in Polymer Light-Emitting Diodes with Interlayers
(p 119-130) Advanced
Functional Materials 20 #1 (2010)
Abstract
Rapid Generation of Biologically Relevant
Hydrogels Containing Long-Range Chemical Gradients
(p 131-137) Advanced
Functional Materials 20 #1 (2010)
Abstract
Red-Emitting Polyfluorenes Grafted with Quinoline-Based
Iridium Complex: 
Simple
Polymeric Chain, Unexpected High Efficiency
(p 138-146) Advanced
Functional Materials 20 #1 (2010)
Abstract
Antioxidant Activity of Degradable Polymer
Poly(trolox ester) to Suppress Oxidative Stress Injury in the Cells
(p 147-154) Advanced
Functional Materials 20 #1 (2010)
Abstract
Exciton-Exciton Annihilation in Mixed-Phase
Polyfluorene Films
(p 155-161) Advanced
Functional Materials 20 #1 (2010)
Abstract
High-Strain Shape-Memory Polymers
(p 162-171) Advanced
Functional Materials 20 #1 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
05.
Advanced Materials 22 #2 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
06.
Aerospace Science and Technology 14 #1 (2010)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
07. Analytical
Chemistry
82, #21 (2010)
(Titles and Abstracts)
Surface Molecular Self-Assembly for Organophosphate Pesticide Imprinting in
Electropolymerized Poly(p-aminothiophenol) Membranes on a Gold Nanoparticle
Modified Glassy Carbon Electrode
(241–249 )
Analytical Chemistry 82, #21 (2010)
Fabrication and Characterization of Paper-Based Microfluidics Prepared in
Nitrocellulose Membrane By Wax Printing
(329–335)
Analytical Chemistry 82, #21 (2010)
GC/MS Analytical Procedure for the Characterization of Glycerolipids, Natural
Waxes, Terpenoid Resins, Proteinaceous and Polysaccharide Materials in the Same
Paint Microsample Avoiding Interferences from Inorganic Media
(376–386)
Analytical Chemistry 82, #21 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
08.
Angewandte Chemie International Edition 49 #2 (2010)
(Titles and Abstracts)
Proton-Conductive Aromatic Ionomers Containing
Highly Sulfonated Blocks for High-Temperature-Operable Fuel Cells
(p 317-320)
Angewandte Chemie International Edition 49 #2 (2010)
Abstract
Consequences of Isostructural Main-Chain
Modifications for the Design of Antimicrobial Foldamers: Helical Mimics of
Host-Defense Peptides Based on a Heterogeneous Amide/Urea Backbone
(p 333-336)
Angewandte Chemie International Edition 49 #2 (2010)
Abstract
Layer-by-Layer Growth of Polymer/Quantum Dot
Composite Multilayers by Nucleophilic Substitution in Organic Media
(p 359-363)
Angewandte Chemie International Edition 49 #2 (2010)
Abstract
Single-Crystal to Single-Crystal Photochemical
Structural Transformations of Interpenetrated 3 D Coordination Polymers by [2+2]
Cycloaddition Reactions
(p 390-393)
Angewandte Chemie International Edition 49 #2 (2010)
Abstract
Synthesis of a Carbon Nitride Structure for
Visible-Light Catalysis by Copolymerization
(p 441-444)
Angewandte Chemie International Edition 49 #2 (2010)
Abstract
************************************************
Angewandte Chemie International Edition 49 #3 (2010)
(Titles and Abstracts)
Nanobubbles from Gas-Generating Polymeric
Nanoparticles: Ultrasound Imaging of Living Subjects
(p 524-528)
Angewandte Chemie International Edition 49 #3 (2010)
Abstract
A Green Route to Well-Defined
High-Molecular-Weight (Co)polymers Using ARGET ATRP with Alkyl Pseudohalides and
Copper Catalysis
(p 541-544)
Angewandte Chemie International Edition 49 #3 (2010)
Abstract
Synthesis of Fe3O4@SiO2@PMMA
Core-Shell-Shell Magnetic Microspheres for Highly Efficient Enrichment of
Peptides and Proteins for MALDI-ToF MS Analysis
(p 607-611)
Angewandte Chemie International Edition 49 #3 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
09.
Analytical
Letters
43 #1 (2010)
(Titles and Abstracts)
Fabrication of an Amperometric Triglyceride Biosensor based on PVC Membrane
(1 – 11)
Analytical
Letters
43 #1 (2010)
Two- and Three-Dimensional Fractal Dimensions of Electro-Deposited
Carbon-Black-Epoxy Composite Films
(197 – 208)
Analytical
Letters
43 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
10.
Appliance Design (January 2010)
(Titles, Abstracts
and Articles)
Trade
Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
11.
Applied Clay Science 47 #1-2 (2010)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
12.
Applied Physics A Materials Science & Processing 98 #3 (2010)
(Titles
and Abstracts)
Fabrication of Ni nanodots templated by nanoporous polysulfone membrane:
Structural and Magnetic properties
(481-485)
Applied Physics A Materials Science & Processing 98 #3 (2010)
Electrospinning of polyacrylonitrile fibers from ionic liquid solution
Tang Yang,
Yongyi Yao,
Yi Lin,
Bing Wang,
Ruili Xiang,
Yurong Wu and
Dacheng Wu
(517-523 )
Applied Physics A Materials Science & Processing 98 #3 (2010)
A nanostructured hybrid material based on polymer infiltrated porous silicon layer
L. De Stefano,
E. De Tommasi,
I. Rea,
L. Rotiroti,
M. Canciello,
G. Maglio and
R. Palumbo
(525-530)
Applied Physics A Materials Science & Processing 98 #3 (2010)
Thermal diffusivity in femtosecond-laser-structured micro-volumes of polymers
(551-556)
Applied Physics A Materials Science & Processing 98 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
13.
Applied Physics B
Lasers and Optics 98 #2-3 (2010)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
14.
Applied Surface Science 256 #6 (2010)
(Titles
and Abstracts)
Preparation and characterization of asymmetric
polyethersulfone and thin-film composite polyamide nanofiltration membranes for
water softening
(1657-1663)
Applied Surface Science 256 #6 (2010)
A sol–gel based surface treatment for
preparation of water repellent antistatic textiles
(1668-1674)
Applied Surface Science 256 #6 (2010)
Surface roughness analysis and improvement of
PMMA-based microfluidic chip chambers by CO2 laser cutting
(1675-1678)
Applied Surface Science 256 #6 (2010)
Direct fabrication of periodic patterns with
hierarchical sub-wavelength structures on poly(3,4-ethylene dioxythiophene)–poly(styrene
sulfonate) thin films using femtosecond laser interference patterning
(1708-1713)
Applied Surface Science 256 #6 (2010)
Synthesis and characterization of thermotropic
liquid crystalline polyester/multi-walled carbon nanotube nanocomposites
(1739-1743)
Applied Surface Science 256 #6 (2010)
The influence of sulfonated polyethersulfone (SPES)
on surface nano-morphology and performance of polyethersulfone (PES) membrane
(1825-1831)
Applied Surface Science 256 #6 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
15.
Biodegradation 21 #1
(2010)
Titles and Abstracts
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
16. Biomass
and Bioenergy 34 #1 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
17.
Biomaterials 31 #6 (2010)
(Titles
and Abstracts)
Self-initiated surface grafting with
poly(2-methacryloyloxyethyl phosphorylcholine) on poly(ether-ether-ketone)
(1017-1024)
Biomaterials 31 #6 (2010)
Silk nanospheres and microspheres from silk/pva
blend films for drug delivery
(1025-1035)
Biomaterials 31 #6 (2010)
The biocompatibility of materials used in
printed circuit board technologies with respect to primary neuronal and K562
cells
(1045-1054)
Biomaterials 31 #6 (2010)
The contribution of plasmid design and release
to in vivo gene expression following delivery from cationic polymer modified
scaffolds
(1140-1147)
Biomaterials 31 #6 (2010)
Injectable biodegradable hydrogels with tunable
mechanical properties for the stimulation of neurogenesic differentiation of
human mesenchymal stem cells in 3D culture
(1148-1157)
Biomaterials 31 #6 (2010)
A biomimetic hydrogel based on methacrylated
dextran-graft-lysine and gelatin for 3D
smooth muscle cell culture
(1158-1170)
Biomaterials 31 #6 (2010)
Immunological response to tissue-engineered
cartilage derived from auricular chondrocytes and a PLLA scaffold in transgenic
mice
(1227-1234)
Biomaterials 31 #6 (2010)
Self-Assembly of phospholipid-analogous
hyperbranched polymers nanomicelles for drug delivery
(1334-1341)
Biomaterials 31 #6 (2010)
Partly PEGylated polyamidoamine dendrimer for
tumor-selective targeting of doxorubicin: The effects of PEGylation degree and
drug conjugation style
(1360-1371)
Biomaterials 31 #6 (2010)
The induction of tumor apoptosis in B16
melanoma following STAT3 siRNA delivery with a lipid-substituted
polyethylenimine
(1420-1428)
Biomaterials 31 #6 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
18.
Biopolymers 93 #3 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
19.
British Plastics and Rubber (January 2010)
(Titles and Abstracts) (H)
Trade Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
20.
Catalysis
Today
149, #3-4 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
21.
Cellulose
17 #1 (2010)
(Titles and Abstracts)
Preparation and characterization of water-redispersible nanofibrillated
cellulose in powder form
(19-30)
Cellulose 17 #1 (2010)
Dissolution mechanisms of wood cellulose fibres in NaOH–water
(31-45)
Cellulose 17 #1 (2010)
Nanocomposites prepared by in situ enzymatic polymerization of phenol with
TEMPO-oxidized nanocellulose
(57-68)
Cellulose 17 #1 (2010)
Glucomannan composite films with cellulose nanowhiskers
(69-81)
Cellulose 17 #1 (2010)
Bacterial cellulose/poly(ethylene glycol) composite: characterization and first
evaluation of biocompatibility
(83-91)
Cellulose 17 #1 (2010)
Ligament-like tough double-network hydrogel based on bacterial cellulose
(93-101)
Cellulose 17 #1 (2010)
Evaluation of molten inorganic salt hydrates as reaction medium for the
esterification of cellulose
(161-165)
Cellulose 17 #1 (2010)
Synthesis of water-soluble cationic cellulose derivatives with tertiary amino
groups
(167-172)
Cellulose 17 #1 (2010)
ABA- and BAB-triblock cooligomers of tri-O-methylated and unmodified
cello-oligosaccharides: syntheses and structure-solubility relationship
(173-186)
Cellulose 17 #1 (2010)
The effects of cotton gauze coating with microbial cellulose
(199-204)
Cellulose 17 #1 (2010)
Formaldehyde removal by Rayon-based activated carbon fibers modified by P-aminobenzoic
acid
(205-214)
Cellulose 17 #1 (2010)
A new methodology to recycle polyester from fabric blends with cellulose
(215-222)
Cellulose 17 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
22.
Chemical Communications #3 (2010)
(Titles, Abstracts and Articles)
Spatially mineralized self-assembled polymeric nanocarriers with enhanced
robustness and controlled drug-releasing property
(377 - 379)
Chemical Communications #3 (2010)
Dispersion of graphene sheets in ionic liquid [bmim][PF6]
stabilized by an ionic liquid polymer
(386 - 388)
Chemical Communications #3 (2010)
Peculiar nanocomposite hydrogel with controllable multiple thermosensitivity:
double phase transition and ternary stable states
(430 - 432)
Chemical Communications #3 (2010)
A rapid and efficient strategy for preparation of super-hydrophobic surface with
cross-linked cyclotriphosphazene/6F-bisphenol A copolymer microspheres
(487 - 489)
Chemical Communications #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
23.
Chemical Engineering (January 2010)
(Titles and Abstracts) (T)
Trade Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
24.
Chemical Engineering Communications 197 #5 (2010)
(Titles
and Abstracts) (T)
HYDROMAGNETIC BOUNDARY LAYER FLOW AND HEAT TRANSFER IN VISCOELASTIC FLUID OVER A
CONTINUOUSLY MOVING PERMEABLE STRETCHING SURFACE WITH NONUNIFORM HEAT
SOURCE/SINK EMBEDDED IN FLUID-SATURATED POROUS MEDIUM
(633 – 655)
Chemical Engineering Communications 197 #5 (2010)
NONLINEAR KELVIN-HELMHOLTZ INSTABILITY OF TWO SUPERPOSED DIELECTRIC FINITE
FLUIDS IN POROUS MEDIUM UNDER VERTICAL ELECTRIC FIELDS
(656 – 683)
Chemical Engineering Communications 197 #5 (2010)
ANALYTICAL AND NUMERICAL SOLUTIONS OF THE MASS CONTINUITY EQUATION IN THE LUMEN
SIDE OF A HOLLOW-FIBER MEMBRANE CONTACTOR WITH LINEAR OR NONLINEAR BOUNDARY
CONDITIONS
(709 – 732)
Chemical Engineering Communications 197 #5 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
25.
Chemical Physics Letters 485 #1-3 (2010)
(Titles and Abstracts)
Measurement of adiabatic ionization energies of
the rotational isomers of n-propylbenzene and m-fluorophenol by direct VUV laser
photoionization
(31-35)
Chemical Physics Letters 485 #1-3 (2010)
Weak hydrogen bonds in
σ-1,4-difluorobenzene-ammonia: A rotational study
(36-39)
Chemical Physics Letters 485 #1-3 (2010)
Electrostatic electrochemistry: Nylon and
polyethylene systems
(231-234)
Chemical Physics Letters 485 #1-3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
26.
Chemical
Week
Titles and Abstracts) Weekly (H)
Trade
Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
27.
Chemistry of Materials 22 #1 (2010)
(Titles
and Abstracts)
Two-Photon Acid Generation in Thin Polymer Films. Photoinduced Electron Transfer
As a Promising Tool for Subwavelength Lithography
(15–17)
Chemistry of Materials 22 #1 (2010)
Bismuth-Assisted CdSe and CdTe Nanowire Growth on Plastics
(77–84)
Chemistry of Materials 22 #1 (2010)
Silicate Dispersion and Mechanical Reinforcement in Polysiloxane/Layered
Silicate Nanocomposites
(167–174)
Chemistry of Materials 22 #1 (2010)
ZnO Nanostructures Grown onto Polypyrrole Films Prepared in Swollen Liquid
Crystals via Integrative Chemistry
(218–225)
Chemistry of Materials 22 #1 (2010)
Ion Conduction and Water Transport in Polyphosphazene-Based Multilayers
(226–232)
Chemistry of Materials 22 #1 (2010)
Polyelectrolyte-Mediated Electrochemical Fabrication of a Polyacetylene p−n
Junction
(241–246)
Chemistry of Materials 22 #1 (2010)
Covalently Bonded Polyaniline−TiO2 Hybrids: A Facile Approach to Highly Stable
Anodic Electrochromic Materials with Low Oxidation Potentials
(255–260)
Chemistry of Materials 22 #1 (2010)
Structured Polymer Brushes on Silicon Carbide
(272–278)
Chemistry of Materials 22 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
28.
Colloid and Polymer Science 288 #1 (2010)
(Titles and Abstracts)
Optimizing functionalization of multiwalled carbon nanotubes using sodium
lignosulfonate
(1-6)
Colloid and Polymer Science 288 #1 (2010)
Photo-living radical polymerization of methyl methacrylate using alkoxyamine as
an initiator
(7-13)
Colloid and Polymer Science 288 #1 (2010)
Shape memory polymer based on chemically cross-linked poly(vinyl alcohol)
containing a small number of water molecules
(15-24)
Colloid and Polymer Science 288 #1 (2010)
Characterization of advanced morphologies in polymer dispersions by AUC and HDC
(25-35)
Colloid and Polymer Science 288 #1 (2010)
Silicone-stabilized liposomes
(37-45)
Colloid and Polymer Science 288 #1 (2010)
Preparation of conductive PTFE nanocomposite containing multiwalled carbon
nanotube via latex heterocoagulation approach
(47-53)
Colloid and Polymer Science 288 #1 (2010)
Soap-free synthesis of highly monodisperse magnetic polymer particles with
amphoteric initiator
(55-61)
Colloid and Polymer Science 288 #1 (2010)
Preparation of silica/perfluoroalkyl methacrylate polymer inorganic/organic
particles in supercritical carbon dioxide
(63-72)
Colloid and Polymer Science 288 #1 (2010)
Nitroxide-mediated photo-living radical polymerization of vinyl acetate
(73-78)
Colloid and Polymer Science 288 #1 (2010)
Fabrication of multiwalled carbon nanotube-wrapped magnetic carbonyl iron
microspheres and their magnetorheology
(79-84)
Colloid and Polymer Science 288 #1 (2010)
Investigation on extremely dilute solution of PEO by PFG-NMR
(85-89)
Colloid and Polymer Science 288 #1 (2010)
Photo-induced micellization of poly(4-pyridinemethoxymethylstyrene)-block-polystyrene
using a photo-acid generator
(91-95)
Colloid and Polymer Science 288 #1 (2010)
An experimental and analytical study of the elasticity of model polyurethane
networks crosslinked by tri- and quadriisocyanate
(97-103)
Colloid and Polymer Science 288 #1 (2010)
Polyglycol-templated synthesis of poly(N-isopropyl acrylamide) microgels
with improved biocompatibility
(105-114)
Colloid and Polymer Science 288 #1 (2010)
Electrospinning fabrication and characterization of poly(vinyl alcohol)/montmorillonite/silver
hybrid nanofibers for antibacterial applications
(115-121)
Colloid and Polymer Science 288 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
29.
Colloids and Surfaces A: Physicochemical and Engineering Aspects 354 #2-3 (2010)
(Titles and Abstracts)
Basic properties of foam films stabilized with
tetraethyl ammonium salt of perfluoro octane sulfonate (PFOS)
(1-7)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 354 #2-3 (2010)
Wetting films from aqueous solutions of
polymeric surfactants on hydrophobic solid surface
(22-27)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 354 #2-3 (2010)
Cross-linked DNA gels: Disruption and release
properties
Pages 28-33
On the origin of electrostatic and steric
repulsion in oil-in-water emulsion films from PEO-PPO-PEO triblock copolymers
(56-60)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 354 #2-3 (2010)
Investigation of pH dependence of poly(acrylic
acid) conformation by means of electric birefringence
(61-64)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 354 #2-3 (2010)
Macroporous poly(aromatic amine): Synthesis and
film fabrication
(156-161)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 354 #2-3 (2010)
Aggregation and network formation of aqueous
methylcellulose and hydroxypropylmethylcellulose solutions
(162-171)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 354 #2-3 (2010)
Molecular orientation and miscibility of
fluorinated α,ω-alkanediol and alcohol at the hexane/water interface
(205-209)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 354 #2-3 (2010)
Super water- and highly oil-repellent films
made of fluorinated poly(alkylpyrroles)
(234-239)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 354 #2-3 (2010)
Multilayered CaCO3/block-copolymer
materials via amorphous precursor to crystal transformation
(279-283)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 354 #2-3 (2010)
Investigation of foam drainage using foam
pressure drop technique
(291-297)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 354 #2-3 (2010)
Induced surface activity of supramolecular
cyclodextrin–statin complexes: Relevance in drug delivery
(308-313)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 354 #2-3 (2010)
Sulfite biosensor based on osmium redox polymer
wired sulfite oxidase
(314-319)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 354 #2-3 (2010)
Topographical, chemical, thermal and
electrostatic properties of latex films
(320-330)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 354 #2-3 (2010)
The long-term release of antibiotics from
monolithic nonporous polymer implants for use as tympanostomy tubes
(331-337)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 354 #2-3 (2010)
Surface tension of high density polyethylene (HDPE)
in supercritical nitrogen: Effect of polymer crystallization
(347-352)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 354 #2-3 (2010)
Template mediated formation of shaped
polypyrrole particles
(368-376)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 354 #2-3 (2010)
Synthesis of monodispersed crosslinked
nanoparticles decorated with surface carboxyl groups via soapless emulsion
polymerization
(377-381)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 354 #2-3 (2010)
Impact of surfactant chain length on dynamic
surface properties of alkyltrimethylammonium bromide/polyacrylic acid solutions
(382-389)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 354 #2-3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
30.
Combustion Science and Technology 182 #1 (2010)
(Titles
and Abstracts) S
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
31.
Composites Part B: Engineering 41 #1 (2010)
(Titles
and Abstracts)
Effects of the surface treatment on the
properties of polyaniline coated carbon nanotubes/epoxy composites
(2-7)
Composites Part B: Engineering 41 #1 (2010)
I–V
characteristics and electro-mechanical response of different carbon black/epoxy
composites
(25-32)
Composites Part B: Engineering 41 #1 (2010)
Measuring mechanical properties of micro- and
nano-fibers embedded in an elastic substrate: Theoretical framework and
experiment
(33-41)
Composites Part B: Engineering 41 #1 (2010)
A predictive model for ultrasonic attenuation
coefficient in particulate composites
(42-47)
Composites Part B: Engineering 41 #1 (2010)
Development of viscoplastic strains during
creep in continuous fibre GMT composites
(48-57)
Composites Part B: Engineering 41 #1 (2010)
Influence of material nonlinearity on thermal
distortion of polymer matrix composite panels
(58-66)
Composites Part B: Engineering 41 #1 (2010)
Impact fracture behaviour of nylon 6-based
ternary nanocomposites
(67-75)
Composites Part B: Engineering 41 #1 (2010)
Experimental study of RC beam–column joints
strengthened using CFRP composites
(76-85)
Composites Part B: Engineering 41 #1 (2010)
Analysis of flexural properties of
hollow-particle filled composites
(86-93)
Composites Part B: Engineering 41 #1 (2010)
Failure of fibrous anisotropic materials under
combined loading
(94-97)
Composites Part B: Engineering 41 #1 (2010)
Natural silica fiber as reinforcing filler of
nylon 6
(98-105)
Composites Part B: Engineering 41 #1 (2010)
Characterizing elastic properties of carbon
nanotubes/polyimide nanocomposites using multi-scale simulation
(106-115)
Composites Part B: Engineering 41 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
32.
Composites
Science and Technology 70 #2 (20010)
(Titles and Abstracts)
Preparation and properties of nanocomposites
based on PS-b-(PS/PB)-b-PS triblock copolymer by controlling the size of silica
nanoparticles with electron beam irradiation
(215-222)
Composites
Science and Technology 70 #2 (20010)
Improved dispersion and mechanical properties
of hybrid nanocomposites
(223-230)
Composites
Science and Technology 70 #2 (20010)
Interfacial bonding of Flax fibre/Poly(
(231-239)
Composites
Science and Technology 70 #2 (20010)
Damage sensitivity of axially loaded
stringer-stiffened curved CFRP panels
(240-248)
Composites
Science and Technology 70 #2 (20010)
Bimodal Co0.5Zn0.5Fe2O4/PANI
nanocomposites: Synthesis, formation mechanism and magnetic properties
(249-254)
Composites
Science and Technology 70 #2 (20010)
Structural health monitoring of glass fiber
reinforced composites using embedded carbon nanotube (CNT) fibers
(260-271)
Composites
Science and Technology 70 #2 (20010)
The static and high strain rate behaviour of a
commingled E-glass/polypropylene woven fabric composite
(272-283)
Composites
Science and Technology 70 #2 (20010)
Influence of single-walled carbon nanotubes on
the effective elastic constants of poly(ethylene terephthalate)
(284-290)
Composites
Science and Technology 70 #2 (20010)
A combined experimental–numerical approach for
generating statistically equivalent fibre distributions for high strength
laminated composite materials
(291-297)
Composites
Science and Technology 70 #2 (20010)
Reduced thermal stress in composites via
negative thermal expansion particulate fillers
(318-327)
Composites
Science and Technology 70 #2 (20010)
Structure–property relationships in isotactic
polypropylene/multi-walled carbon nanotubes nanocomposites
(328-335)
Composites
Science and Technology 70 #2 (20010)
Liquid sensing properties of fibres prepared by
melt spinning from poly(lactic acid) containing multi-walled carbon nanotubes
(343-349)
Composites
Science and Technology 70 #2 (20010)
Buckling strength of adhesively-bonded single
and double-strap repairs on carbon-epoxy structures
(371-379)
Composites
Science and Technology 70 #2 (20010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
33.
Composite Structures 92 #4 (2010)
(Titles and Abstracts)
Two-way bending behavior of 3-D GFRP sandwich
panels with through-thickness fiber insertions
(950-963)
Composite Structures 92 #4 (2010)
Bond strength of CFRP–concrete elements under
freeze–thaw cycles
(973-983)
Composite Structures 92 #4 (2010)
A numerical study of free and forced vibration
of composite sandwich beam with viscoelastic core
(996-1008)
Composite Structures 92 #4 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
34.
Concurrent Engineering:
17 #34(2009)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
35.
Corrosion Science 52 #2 (2010)
(Titles and Abstracts)
Correlation of interfacial electrode potential
and corrosion resistance of plasma polymer coated galvanized steel. Part 1:
Ultra-thin plasma polymer films of varying thickness
(369-377)
Corrosion Science 52 #2 (2010)
Correlation of interfacial electrode potential
and corrosion resistance of plasma polymer coated galvanized steel. Part 2:
Influence of forming induced defects
(378-386)
Corrosion Science 52 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
36.
Dalton Transactions #3 (2010)
(Titles
and Abstracts)
The first polyoxometalate-templated four-fold interpenetrated coordination
polymer with new topology and ferroelectricity
(700 - 703)
Dalton Transactions #3 (2010)
The amido-bridged zirconocene's reactivity and catalytic behavior for ethylene
polymerization
(807 - 814)
Dalton Transactions #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
37.
Doklady Chemistry 429 #2 (2009)
(Titles only)
New poly(1,2,3-triazolesulfonic acids) for proton exchange membranes of fuel
cell
(305-310)
Doklady Chemistry 429 #2 (2009)
Synthesis of stereoregular polybutadiene under ultrasonic treatment
(321-323)
Doklady Chemistry 429 #2 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
38.
Drying Technology 28 #1 (2010)
(Titles and Abstracts)
Drying of Lignite in a Pressurized Steam Fluidized Bed—Theory and Experiments
(5 – 19)
Drying Technology 28 #1 (2010)
Performance and Energy Consumption of an Impinging Stream Dryer for
High-Moisture Particulate Materials
(20 – 29)
Drying Technology 28 #1 (2010)
Dewatering a Superabsorbent Polymer Using Liquefied Dimethyl Ether
(30 – 35)
Drying Technology 28 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
39.
Dyes and Pigments 85 #3 (2010)
(Titles and Abstracts)
Red non-doped electroluminescent dyes based on
arylamino fumaronitrile derivatives
(86-92)
Dyes and Pigments 85 #3 (2010)
A novel azoanthraquinone dye made through
innovative enzymatic process
(99-108)
Dyes and Pigments 85 #3 (2010)
Structural and spectroscopic characteristics of
polycyclic fluorophores relevant to organic light-emitting diodes
(109-116)
Dyes and Pigments 85 #3 (2010)
Polyvinyl alcohol as an aftertreatment: Part 3
direct dyes on cotton
(124-132)
Dyes and Pigments 85 #3 (2010)
The crystal structure of two new developers for
high-performance thermo-sensitive paper: H-bonded network in urea–urethane
derivatives
(139-142)
Dyes and Pigments 85 #3 (2010)
Tunable emission of polymer light emitting
diodes bearing green-emitting Ir(III) complexes: The structural role of
9-((6-(4-fluorophenyl)pyridin-3-yl)methyl)-9H-carbazole
ligands
(143-151)
Dyes and Pigments 85 #3 (2010)
First hyperpolarizability orientation in
asymmetric pyrrole-based polyene chromophores
(162-170)
Dyes and Pigments 85 #3 (2010)
Absorption and fluorescence of
arylmethylidenoxindoles and isoindigo
(171-176)
Dyes and Pigments 85 #3 (2010)
The synthesis and characterization of
metal-free and metallophthalocyanine polymers by microwave irradiation
containing diazadithia macrocyclic moieties
(177-182)
Dyes and Pigments 85 #3 (2010)
Photophysical investigations on the sensor
potential of novel, poly(propylenamine) dendrimers modified with
1,8-naphthalimide units
(189-193)
Dyes and Pigments 85 #3 (2010)
The synthesis and characterisation of novel
pyrazoline derivatives containing triphenylamine
(194-200)
Dyes and Pigments 85 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
40.
Energy and Buildings 42 #3 (2010)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
41.
Engineering Failure Analysis 17 #2 (2010)
(Titles
and Abstracts)
Failure analysis of heat exchanger fluid vapor
phase vent lines in a Polyester plant
(447-454)
Engineering Failure Analysis 17 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
42.
Environmental
Science & Technology 44 #1 (2010)
(Titles
and Abstracts)
Using a Novel Petroselinic Acid Embedded Cellulose Acetate Membrane to Mimic
Plant Partitioning and In Vivo Uptake of Polycyclic Aromatic Hydrocarbons
(297–301)
Environmental Science & Technology 44 #1 (2010)
Characterization of the Mineral Fraction Associated to Extracellular Polymeric
Substances (EPS) in Anaerobic Granular Sludges
(412–418)
Environmental Science & Technology 44 #1 (2010)
Sonochemical Degradation of Perfluorooctanesulfonate in Aqueous Film-Forming
Foams
(432–438)
Environmental Science & Technology 44 #1 (2010)
Wood Plastic Composite Produced by Nonmetals from Pulverized Waste Printed
Circuit Boards
(463–468)
Environmental Science & Technology 44 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
43.
e-Polymers (12/31/2009) (52)
(Titles, Abstracts and Articles)
141[2009] Effect of calcium neutralization on elastic and swelling
properties of crosslinked poly(acrylic acid) - correlation to inhomogeneities
and phase behaviour
e-Polymers (12/31/2009) (52)
[Abstract]
142[2009] New optically active poly(amide-imide)s from N,N´-(bicyclo[2,2,2]oct-7-ene-2,3,5,6-tetracrboxylic)-bis-L-valine
diacid and aromatic diamines: synthesis and properties
e-Polymers (12/31/2009) (52)
[Abstract]
143[2009] Effects of polypropylene-g-dibutyl maleate on mechanical and
rheological properties of PP/PA6 blends
e-Polymers (12/31/2009) (52)
[Abstract]
144[2009] Release behavior of 2,4-dichlorophenoxyacetic acid herbicide using
novel porous poly(acrylamide) hydrogels
e-Polymers (12/31/2009) (52)
[Abstract]
145[2009] Modification of styrene polymer by attaching suitable groups as
side chain
e-Polymers (12/31/2009) (52)
[Abstract]
146[2009] New trends in polymer electrolytes: a review
e-Polymers (12/31/2009) (52)
[Abstract]
147[2009] Synthesis and characterization of novel fluorinated
polybenzoxazoles derived from 2,5-difluoroterephthalic acid
e-Polymers (12/31/2009) (52)
[Abstract]
148[2009] Fabrication and investigation of core-sheath polymer/polyaniline
composite nanofibers
e-Polymers (12/31/2009) (52)
[Abstract]
149[2009] Effect of rosemary extract on the radiation stability of UHMWPE
e-Polymers (12/31/2009) (52)
[Abstract]
150[2009] Influence of side chain lengths of graft copolymers on
compatibilization of homopolymer a/homopolymer b/graft copolymer ternary blends:
a Monte Carlo simulation
e-Polymers (12/31/2009) (52)
[Abstract]
151[2009] Flame retardance and thermal properties of a novel
phosphorus-containing unsaturated polyester resin/SiO2 hybrid nanocomposite
e-Polymers (12/31/2009) (52)
[Abstract]
152[2009] Morphology, thermal and mechanical properties of PVAc/ TiO2 hybrid
nanofibers
e-Polymers (12/31/2009) (52)
[Abstract]
*************************************************
e-Polymers (1/7/2010) (2)
(Titles, Abstracts and Articles)
001[2010] Non-isothermal degradation kinetics for polycarbonate/polymethylphenylsilsesquioxane
composites
e-Polymers (1/7/2010) (2)
[Abstract]
002[2010] Konjac glucomannan nanocrystals prepared by acid hydrolysis
e-Polymers (1/7/2010) (2)
[Abstract]
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
44.
European Coatings, January (2010)
(Titles, Abstracts and Articles)
Trade
Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
45.
European Journal of Physics 31 #2
(2010)
(Titles
and Abstracts; Full PDF versions of Articles are available free for 30 days after
publication)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
46.
Fire Safety Journal 45 #1 (2010)
(Titles and Abstracts) S
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
47.
Industrial &
Engineering Chemistry Research 49 #1 (2010)
(Titles and Abstracts) (T)
Effect of Polymer Granules on the Electrostatic Behavior in Gas−Solid Fluidized
Beds
(132–139)
Industrial & Engineering Chemistry Research 49 #1 (2010)
Composite Membranes Based on a Selective Chitosan−Poly(ethylene glycol) Hybrid
Layer: Synthesis, Characterization, and Performance in Oil−Water Purification
(366–373)
Industrial & Engineering Chemistry Research 49 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
48.
Injection Molding Magazine (January 2010)
(Titles, Abstracts and
Articles)
Trade
Magazine
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
49.
International Journal of Polymer Analysis and Characterization 15 #1 (2010)
(Titles and Abstracts)
Study of Quenched Poly Ethylene Naphatalate (PEN) Using the Three-Phase Model by
Differential Scanning Calorimetry (DSC)
(7 – 17)
International Journal of Polymer Analysis and Characterization 15 #1 (2010)
Medical-Grade Polyvinyl Chloride Modified with Crystal Violet and
Montmorillonite
(18 – 26)
International Journal of Polymer Analysis and Characterization 15 #1 (2010)
Graft Copolymerization of Methyl Methacrylate (MMA) onto Agave americana
Fibers and Evaluation of their Physicochemical Properties
(27 – 42)
International Journal of Polymer Analysis and Characterization 15 #1 (2010)
Preparation and Characterization of Conjugated Polypseudorotaxane Poly(Pyrrole/α-Cyclodextrin)
(43 – 53)
International Journal of Polymer Analysis and Characterization 15 #1 (2010)
Correlation between Morphology and Electrical Response in PEN Polyester Film
(54 – 66)
International Journal of Polymer Analysis and Characterization 15 #1 (2010)
A Comparative Study on Time-Dependent Recovery Behavior of PTT and PET
Multifilament
(67 – 72)
International Journal of Polymer Analysis and Characterization 15 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
50.
International Journal of Polymeric Materials 59 #3 (2010)
(Titles and Abstracts)
Synthesis, Characterization and Glass/Carbon Reinforcement of
Acetone-Formaldehyde-1,5-Dihydroxynaphthalene-Epoxy Resin System
(151 – 160)
International Journal of Polymeric Materials 59 #3 (2010)
Expanded Discrete Relaxation Model for Konjac Glucomannan Hydrocolloid
(161 – 172)
International Journal of Polymeric Materials 59 #3 (2010)
Cure Kinetics and Sorption Characteristics of Neoprene-Based Rubber Ferrite
Composites
(173 – 183)
International Journal of Polymeric Materials 59 #3 (2010)
Preparation and Properties of Drug-Loaded Chitosan-Sodium Alginate Complex
Membrane
(184 – 191)
International Journal of Polymeric Materials 59 #3 (2010)
Modified Cyclohexanone-Formaldehyde Resin as an Epoxy Resin Curing Agent
(192 – 199)
International Journal of Polymeric Materials 59 #3 (2010)
Investigation of Properties of Polymer/Textile Fiber Composites
(200 – 214)
International Journal of Polymeric Materials 59 #3 (2010)
Composites of Poly(Keto-Sulfide)–Epoxy Resin Systems and Their Thermal and
Mechanical Properties
(215 – 229)
International Journal of Polymeric Materials 59 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
51.
Journal of Materials
Science 45 #3 (2010)
(Titles and Abstracts) (H)
Synthesis and characterisation of styrene butadiene styrene-g-N-isopropylacrylamide
via UV polymerisation for potential use in biomedical applications
(599-606) Journal
of Materials Science 45 #3 (2010)
Influence of granulated blast furnace slag on the reaction, structure and
properties of fly ash based geopolymer
(607-615) Journal
of Materials Science 45 #3 (2010)
The effect of multi-walled carbon nanotubes addition on the thermo-oxidative
decomposition and flammability of PP/MWCNT nanocomposites
(633-640) Journal
of Materials Science 45 #3 (2010)
Preparation and characterization of electrospun
poly(2,5-dicyclohexylphenylene-1,4-ethynylene) (C24H30)n/poly(ethylene
oxide) (PEO) hybrid nanofibers
(713-718) Journal
of Materials Science 45 #3 (2010)
Effect of test conditions on the bending strength of a geopolymer-reinforced
composite
(744-749) Journal
of Materials Science 45 #3 (2010)
A facile method for the synthesis of ZnS/polystyrene composite particles and ZnS
hollow micro-spheres
(777-782) Journal
of Materials Science 45 #3 (2010)
Properties of cellulosic fibre reinforced plaster: influence of hemp or flax
fibres on the properties of set gypsum
(793-803) Journal
of Materials Science 45 #3 (2010)
Critical fluid shear stress analysis for cell–polymer adhesion
(811-817) Journal
of Materials Science 45 #3 (2010)
*************************************************
Journal of Materials
Science 45 #4 (2010)
(Titles and Abstracts) (H)
Novel approach for measuring the effective shear modulus of porous materials
(936-945)
Journal of Materials Science 45 #4 (2010)
An unusual morphology and crystallization behavior in in situ formed
polyphenylene oxide/polyamide 6 blends
(987-992)
Journal of Materials Science 45 #4 (2010)
Blend membranes from poly(2,5-benzimidazole) and poly(styrene sulfonic acid) as
proton-conducting polymer electrolytes for fuel cells
(993-998Journal
of Materials Science 45 #4 (2010)
Calcium-containing inorganic polymers as potential bioactive materials
(999-1007)
Journal of Materials Science 45 #4 (2010)
Polyacrylamide and poly(acrylamide-co-2-acrylamido-2-methyl-1-propanesulfonic
acid)-silica composite nanogels through in situ microemulsion polymerisation
(1008-1016)
Journal of Materials Science 45 #4 (2010)
Crosslinked sulfonated poly (bis-A)-sulfones as proton exchange membrane for PEM
fuel cell application
(1017-1024)
Journal of Materials Science 45 #4 (2010)
Synthesis and characterization of novel preceramic polymer for SiC
(1025-1031)
Journal of Materials Science 45 #4 (2010)
Electrospun poly(methyl methacrylate) nanofibers and microparticles
(1032-1038)
Journal of Materials Science 45 #4 (2010)
Influence of cross-linking density on swelling and estradiol permeation of
chitosan membranes
(1046-1051)
Journal of Materials Science 45 #4 (2010)
Effect of surface modifications of carbon black (CB) on the properties of
CB/polyurethane foams
(1065-1073)
Journal of Materials Science 45 #4 (2010)
Effect of sequence of nanoclay addition in TPU/PP blends: thermomechanical
properties
(1078-1085)
Journal of Materials Science 45 #4 (2010)
Influence of fibre taper on the work of fibre pull-out in short fibre composite
fracture
(1086-1090)
Journal of Materials Science 45 #4 (2010)
*************************************************
Journal of Materials
Science 45 #5 (2010)
(Titles and Abstracts) (H)
The use of new technologies in coloration of textile fibers
(1143-1153)
Journal of Materials Science 45 #5 (2010)
A novel method for preparation of organic resins reinforced geopolymer
composites
(1189-1192)
Journal of Materials Science 45 #5 (2010)
The toughness of epoxy polymers and fibre composites modified with rubber
microparticles and silica nanoparticles
(1193-1210)
Journal of Materials Science 45 #5 (2010)
Mechanical studies on poly(vinyl chloride)–poly(methyl methacrylate)-based
polymer electrolytes
(1280-1283)
Journal of Materials Science 45 #5 (2010)
In vitro degradation and drug release from polymer blends based on poly(dl-lactide),
poly(l-lactide-glycolide)
and poly(ε-caprolactone)
(1284-1292)
Journal of Materials Science 45 #5 (2010)
Dry rolling and sliding friction and wear of organophilic layered
silicate/hydrogenated nitrile rubber nanocomposite
(1293-1298)
Journal of Materials Science 45 #5 (2010)
Solvent control of cellulose acetate nanofibre felt structure produced by
electrospinning
(1299-1306)
Journal of Materials Science 45 #5 (2010)
Self-assembly of coordination polymers constructed from CuCN and unidentate
pyridine bases
(1307-1314)
Journal of Materials Science 45 #5 (2010)
Properties of polymer networks prepared by blending polyester urethane acrylate
with acrylated epoxidized soybean oil
(1315-1320)
Journal of Materials Science 45 #5 (2010)
1,3,4-Oxadiazole epoxy resin-based liquid crystalline thermosets and their cure
kinetics
(1321-1327)
Journal of Materials Science 45 #5 (2010)
Isothermal crystallization kinetics of poly(vinylidene fluoride) in the α-phase
in the scope of the Avrami equation
(1328-1335)
Journal of Materials Science 45 #5 (2010)
Utilization of olive mill sludge in manufacture of lignocellulosic/polypropylene
composite
(1336-1342)
Journal of Materials Science 45 #5 (2010)
Functional geraniol-Ca(OH)2 composite/sodium acetate alginate film on
nonwoven polyethylene sheet: acetic acid gas production in response to acid
(1343-1349)
Journal of Materials Science 45 #5 (2010)
High strength bio-composite films of poly(vinyl alcohol) reinforced with
chemically modified-fly ash
(1354-1360)
Journal of Materials Science 45 #5 (2010)
A non-destructive method for thickness measurement of thin electrospun membranes
using white light profilometry
(1411-1418)
Journal of Materials Science 45 #5 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
52.
Journal of Polymers and the Environment
17 #3 (2009)
(Titles and Abstracts)
Synthesis of Segmented Polyurethane Based on Polymeric Soybean Oil Polyol and
Poly (Ethylene Glycol)
(153-158)
Journal of Polymers and the Environment 17 #3 (2009)
Influence of Carbonyl Fe on Degradation of Epoxy in Ozone Environment
(159-164)
Journal of Polymers and the Environment 17 #3 (2009)
Adhesion Properties of Adhesive Prepared from Waste Polystyrene
(165-169)
Journal of Polymers and the Environment 17 #3 (2009)
Fouling and Degradation of Polycarbonate in Seawater: Field and Lab Studies
(170-180)
Journal of Polymers and the Environment 17 #3 (2009)
Preparation, Characterization and Application of Leather Particulate-Polymer
Composites (LPPCs)
(181-186)
Journal of Polymers and the Environment 17 #3 (2009)
Connectivity of Hybrid Polymer by Tight Binding Approximation: Example of (Si(CH3)2)n(OSiO)p(OH)q
(187-190)
Journal of Polymers and the Environment 17 #3 (2009)
Natural Weathering Studies of Polypropylene
(191-202)
Journal of Polymers and the Environment 17 #3 (2009)
Study on Biodegradable Starch/OMMT Nanocomposites for Packaging Applications
(203-207)
Journal of Polymers and the Environment 17 #3 (2009)
Methanolysis and Hydrolysis of Polycarbonate Under Moderate Conditions
(208-211)
Journal of Polymers and the Environment 17 #3 (2009)
The Shape Memory Properties of Biodegradable Chitosan/Poly(l-lactide) Composites
(212-224)
Journal of Polymers and the Environment 17 #3 (2009)
**************************************************
Journal of Polymers and the Environment
17 #4 (2009)
(Titles and Abstracts)
Preparation and Properties of Thermoplastic Starch/Montmorillonite Nanocomposite
Using N-(2-Hydroxyethyl)formamide as a New Additive
(225-232)
Journal of Polymers and the Environment 17 #4 (2009)
Comparative Biodegradation Studies of Non-poronized and Poronized LDPE Using
Indigenous Microbial Consortium
(233-239)
Journal of Polymers and the Environment 17 #4 (2009)
Biodegradable Poly(lactic acid) Blends with Chemically Modified
Polyhydroxyoctanoate Through Chain Extension
(240-247)
Journal of Polymers and the Environment 17 #4 (2009)
Comparison of Cationic and Unmodified Starches in Reactive Extrusion of Starch–Polyacrylamide
Graft Copolymers
(248-253)
Journal of Polymers and the Environment 17 #4 (2009)
Preparation, Thermal Properties and Thermal Reliability of Form-Stable
Paraffin/Polypropylene Composite for Thermal Energy Storage
(254-258)
Journal of Polymers and the Environment 17 #4 (2009)
Use of Industrial Hemp Fibers to Reinforce Wheat Gluten Plastics
(259-266)
Journal of Polymers and the Environment 17 #4 (2009)
Synergistic Effect of TNPP and Carbon Black in Weathered XLPE Materials
(267-272)
Journal of Polymers and the Environment 17 #4 (2009)
Rheology of Concentrated Cellulose Solutions in 1-Butyl-3-methylimidazolium
Chloride
(273-279)
Journal of Polymers and the Environment 17 #4 (2009)
Biodegradation of the Films of PP, PHBV and Its Blend in Soil
(280-285)
Journal of Polymers and the Environment 17 #4 (2009)
Influence of pH and C/N Ratio on Poly(Vinyl Alcohol) Biodegradation in Mixed
Bacterial Culture
(286-290)
Journal of Polymers and the Environment 17 #4 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
53.
Journal of Porous Materials 17 #1 (2010)
(Titles and Abstracts) (R)
Mechanical properties of porous methyl silsesquioxane and nanoclustering silica
films using atomic force microscope
(11-18)
Journal of Porous Materials 17 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
54.
Journal of Rheology 53 #6 (2009)
(Titles and Abstracts)
Observing the chain stretch transition in a highly entangled
polyisoprene melt using transient extensional rheometry
(1327-1346)
Journal of Rheology 53 #6 (2009)
Abstract
Local versus integral measurements of the extensional viscosity of
polymer melts
(1363-1377)
Journal of Rheology 53 #6 (2009)
Abstract
On time-temperature-concentration superposition principle for dynamic
rheology of carbon black filled polymers
(1379-1388)
Journal of Rheology 53 #6 (2009)
Abstract
Exploring stress overshoot phenomenon upon startup deformation of
entangled linear polymeric liquids
(1389-1401)
Journal of Rheology 53 #6 (2009)
Abstract
Influence of confinement on the steady state behavior of single droplets
in shear flow for immiscible blends with one viscoelastic component
(1403-1424)
Journal of Rheology 53 #6 (2009)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
55.
Macromolecular Chemistry and Physics 211 #1 (2010)
(Titles and Abstracts)
Copolymer of Fluorene and Triphenylamine
Moieties: Direct and Post-Functionalization Strategy, Structural
Characterization, and Chemosensoring Behavior
(p 18-26)
Macromolecular Chemistry and Physics 211 #1 (2010)
Abstract
Luminescent Mechanochromic Sensors Based on
Poly(vinylidene fluoride) and Excimer-Forming p-Phenylene Vinylene Dyes
(p 28-34)
Macromolecular Chemistry and Physics 211 #1 (2010)
Abstract
Rapid Synthesis and MALDI-ToF Characterization of
Poly(ethylene oxide) Multiarm Star Polymers
(p 35-44)
Macromolecular Chemistry and Physics 211 #1 (2010)
Abstract
Synthesis of Amphiphilic and Double-Hydrophilic
Block Copolymers Containing Poly(vinyl amine) Segments by RAFT Polymerization of
N-Vinylphthalimide
(p 45-56)
Macromolecular Chemistry and Physics 211 #1 (2010)
Abstract
Vitrification and Devitrification during the
Non-Isothermal Cure of a Thermoset. Theoretical Model and Comparison with
Calorimetric Experiments
(p 57-65)
Macromolecular Chemistry and Physics 211 #1 (2010)
Abstract
Characterization and Crystallization Kinetics of
in situ Prepared Poly(propylene terephthalate)/SiO2
Nanocomposites
(p 66-79)
Macromolecular Chemistry and Physics 211 #1 (2010)
Abstract
A Perfect Couple: PLP/SEC/ESI-MS for the Accurate
Determination of Propagation Rate Coefficients in Free Radical Polymerization
(p 80-90)
Macromolecular Chemistry and Physics 211 #1 (2010)
Abstract
Role of Silica Properties in the Polymerisation
of Ethylene Using Supported Metallocene Catalysts
(p 91-102)
Macromolecular Chemistry and Physics 211 #1 (2010)
Abstract
Influence of Type of Initiation on Thiol-Ene
Click
Chemistry
(p 103-110)
Macromolecular Chemistry and Physics 211 #1 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
56.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
57.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
58.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
59.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
60.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
61.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
62.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
63.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
64.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
65.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
66.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
67.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
68.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
67.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
70.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Roger D.
Corneliussen
Editor
Telephone: 610 883 0055
rcorneliussen@4spe.org
www.maropolymeronline.com
Copyright 2009 by Roger D. Corneliussen