Copyright 2009 by Roger D. Corneliussen
Below are links to the new articles by journals. A click should take you to the journal website. This is a great variation in where one ends up. In some cases, a click will take you to the issue in other cases a click will take you to the website and you must do a few more clicks to get to the issue. This is controlled by the publisher and not Maro. Fortunately, with a little practice, this should not be a serious problem. (RDC)
Polymer
Track (News)
Updated daily
Week 01 (1/11-1/15)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
01.
Advanced Materials 22 #3 (2010)
(Titles and Abstracts)
Pentacene Transistors Fabricated on Photocurable
Polymer Gate Dielectrics: Tuning Surface Viscoelasticity and Device Response
(p 342-346)
Advanced Materials 22 #3 (2010)
Abstract
Silicon Atom Substitution Enhances Interchain
Packing in a Thiophene-Based Polymer System
(p 371-375)
Advanced Materials 22 #3 (2010)
Abstract
Highly Efficient Tandem Polymer Photovoltaic
Cells
(p 380-383)
Advanced Materials 22 #3 (2010)
Abstract
Evidence for Band-Like Transport in Graphene-Based
Organic Monolayers
(p 384-388)
Advanced Materials 22 #3 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
02.
AIChE
Journal 56 #2 (2010)
(Titles and Abstracts) (T)
Spectral characterization of static mixers. The
S-shaped micromixer as a case study
(p 318-335)
AIChE Journal 56 #2 (2010)
Abstract
The effect of mixer properties and fill level on
granular flow in a bladed mixer
(p 336-353)
AIChE Journal 56 #2 (2010)
Abstract
Modeling the dynamics of reactive foaming and
film thinning in polyurethane foams
(p 522-530)
AIChE Journal 56 #2 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
03.
Angewandte Chemie International Edition 49 #4 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
04.
Applied
Organometallic Chemistry
24 #2 (20010)
(Titles and Abstracts)
Synthesis of 2-(N-arylimino)pyrrolide
nickel complexes and polymerization of methyl methacrylate
(p 82-85)
Applied Organometallic Chemistry 24 #2 (20010)
Abstract
Organotin catalysts grafted onto cross-linked
polystyrene supports through polar spacers
(p 135-141)
Applied Organometallic Chemistry 24 #2 (20010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
05.
Applied Physics
Letters 96 #1 (2010)
Titles and Abstracts
High-Q conical polymeric microcavities
(# 013303)
Applied Physics Letters 96 #1 (2010)
Multilayer structured polymer light emitting diodes with cross-linked polymer
matrices|
(# 013504)
Applied Physics Letters 96 #1 (2010)
Flexible high-frequency microwave inductors and capacitors integrated on a
polyethylene terephthalate substrate
(# 013509)
Applied Physics Letters 96 #1 (2010)
Carbon nanotube film piezoresistors embedded in polymer membranes
(# 013511)
Applied Physics Letters 96 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
06.
Automotive Engineering International
(January 2009)
(Titles, Abstracts and Articles)
Trade Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
07.
Biomacromolecules 11 #1 (2010)
(Titles and Abstracts)
Wet-Spinning of Regenerated Silk Fiber from Aqueous Silk Fibroin Solution:
Discussion of Spinning Parameters
(15)
Biomacromolecules 11 #1 (2010)
Continuum of Structural Organization from Chitosan Solutions to Derived Physical
Forms
(612)
Biomacromolecules 11 #1 (2010)
Fluorescent Conjugated Polyfluorene with Pendant Lactopyranosyl Ligands for
Studies of Ca2+-Mediated Carbohydrate−Carbohydrate Interaction
(1319)
Biomacromolecules 11 #1 (2010)
Biodegradation of Physicochemically Treated Polycarbonate by Fungi
(2028)
Biomacromolecules 11 #1 (2010)
Understanding the Protonation Behavior of Linear Polyethylenimine in Solutions
through Monte Carlo Simulations
(2938)
Biomacromolecules 11 #1 (2010)
Characterization of Tailor-Made Copolymers of Oligo(ethylene glycol) Methyl
Ether Methacrylate and N,N-Dimethylaminoethyl Methacrylate as Nonviral Gene
Transfer Agents: Influence of Macromolecular Structure on Gene Vector Particle
Properties and Transfection Efficiency
(3950)
Biomacromolecules 11 #1 (2010)
Entering and Exiting the Protein−Polyelectrolyte Coacervate Phase via
Nonmonotonic Salt Dependence of Critical Conditions
(5159)
Biomacromolecules 11 #1 (2010)
Modification of Polylactide Surfaces with Lactide-Ethylene Oxide Functional
Block Copolymers: Accessibility of Functional Groups
(6875)
Biomacromolecules 11 #1 (2010)
Hydrophobization and Antimicrobial Activity of Chitosan and Paper-Based
Packaging Material
(8896)
Biomacromolecules 11 #1 (2010)
Comparison of the Mechanical Properties of Cellulose and Starch Films
(126132)
Biomacromolecules 11 #1 (2010)
Nanoparticles Incorporated in pH-Sensitive Hydrogels as Amoxicillin Delivery for
Eradication of Helicobacter pylori
(133142)
Biomacromolecules 11 #1 (2010)
Insoluble and Flexible Silk Films Containing Glycerol
(143150)
Biomacromolecules 11 #1 (2010)
Polylactide Stereocomplex-Based Electrospun Materials Possessing Surface with
Antibacterial and Hemostatic Properties
(151159)
Biomacromolecules 11 #1 (2010)
Metastability of Nematic Gels Made of Aqueous Chitin Nanocrystal Dispersions
(175181)
Biomacromolecules 11 #1 (2010)
Viscoelasticity and Phase Separation of Aqueous Na-Type Gellan Solution
(187191)
Biomacromolecules 11 #1 (2010)
Functional Star Polymers with a Cholic Acid Core and their Thermosensitive
Properties
(201206)
Biomacromolecules 11 #1 (2010)
Influence of Amide versus Ester Linkages on the Properties of Eight-Armed
PEG-PLA Star Block Copolymer Hydrogels
(224232)
Biomacromolecules 11 #1 (2010)
Protein-Resistant Polymer Coatings Based on Surface-Adsorbed Poly(aminoethyl
methacrylate)/Poly(ethylene glycol) Copolymers
(233237)
Biomacromolecules 11 #1 (2010)
Synthesis of Hetero-Telechelic α,ω Bio-Functionalized Polymers
(238244)
Biomacromolecules 11 #1 (2010)
Synthesis and Evaluation of Phenylalanine-Modified Hyperbranched Poly(amido
amine)s as Promising Gene Carriers
(245251)
Biomacromolecules 11 #1 (2010)
Heterostereocomplexation between Biodegradable and Optically Active Polyesters
as a Versatile Preparation Method for Biodegradable Materials
(252258)
Biomacromolecules 11 #1 (2010)
Two-Step Biocatalytic Route to Biobased Functional Polyesters from ω-Carboxy
Fatty Acids and Diols
(259268)
Biomacromolecules 11 #1 (2010)
Glutathione-Mediated Biodegradable Polyurethanes Derived from l-Arabinitol
(269276)
Biomacromolecules 11 #1 (2010)
Migration and Hydrolysis of Hydrophobic Polylactide Plasticizer
(277283)
Biomacromolecules 11 #1 (2010)
Nonbiofouling Polymer Brush with Latent Aldehyde Functionality as a Template for
Protein Micropatterning
(284293)
Biomacromolecules 11 #1 (2010)
Elucidating Colorization in the Functionalization of Hydroxyl-Containing
Polymers Using Unsaturated Anhydrides/Acyl Chlorides in the Presence of
Triethylamine
(304307)
Biomacromolecules 11 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
08.
Biomaterials 31 #7 (2010)
(Titles
and Abstracts)
The effect of topography of polymer surfaces on
platelet adhesion
(1533-1545)
Biomaterials 31 #7 (2010)
The effect of poly (ethylene-co-vinyl alcohol)
on senescence-associated alterations of human dermal fibroblasts
(1568-1577)
Biomaterials 31 #7 (2010)
Polyester based nerve guidance conduit design
(1596-1603)
Biomaterials 31 #7 (2010)
Cross-linked open-pore elastic hydrogels based
on tropoelastin, elastin and high pressure CO2
(1655-1665)
Biomaterials 31 #7 (2010)
Dose effect of tumor necrosis factor-α on
in vitro osteogenic differentiation of
mesenchymal stem cells on biodegradable polymeric microfiber scaffolds
(1666-1675)
Biomaterials 31 #7 (2010)
Differentiation of human bone marrow
mesenchymal stem cells grown in terpolyesters of 3-hydroxyalkanoates scaffolds
into nerve cells
(1691-1698)
Biomaterials 31 #7 (2010)
Poly(
(1699-1706)
Biomaterials 31 #7 (2010)
Synthesizing and binding dual-mode poly
(lactic-co-glycolic acid) (PLGA) nanobubbles for cancer targeting and imaging
(1716-1722)
Biomaterials 31 #7 (2010)
The performance of PEGylated nanocapsules of
perfluorooctyl bromide as an ultrasound contrast agent
(1723-1731)
Biomaterials 31 #7 (2010)
Design, syntheses and evaluation of
hemocompatible pegylated-antimicrobial polymers with well-controlled molecular
structures
(1751-1756)
Biomaterials 31 #7 (2010)
The utilization of pathogen-like cellular
trafficking by single chain block copolymer
(1757-1764)
Biomaterials 31 #7 (2010)
Molecular dynamics study of the encapsulation
capability of a PCLPEO based block copolymer for hydrophobic drugs with
different spatial distributions of hydrogen bond donors and acceptors
(1780-1786)
Biomaterials 31 #7 (2010)
A guanidinylated bioreducible polymer with high
nuclear localization ability for gene delivery systems
(1798-1804)
Biomaterials 31 #7 (2010)
Structure-activity relationships of cationic
shell-crosslinked knedel-like nanoparticles: Shell composition and transfection
efficiency/cytotoxicity
(1805-1813)
Biomaterials 31 #7 (2010)
Ultrapure chitosan oligomers as carriers for
corneal gene transfer
(1814-1820)
Biomaterials 31 #7 (2010)
Low molecular weight polyethylenimine
cross-linked by 2-hydroxypropyl-γ-cyclodextrin coupled to peptide targeting HER2
as a gene delivery vector
(1830-1838)
Biomaterials 31 #7 (2010)
Development of pHresponsive nanocarriers using
trimethylchitosans and methacrylic acid copolymer for siRNA delivery
(1839-1849)
Biomaterials 31 #7 (2010)
The effect of surface modification of
adenovirus with an arginine-grafted bioreducible polymer on transduction
efficiency and immunogenicity in cancer gene therapy
(1865-1874)
Biomaterials 31 #7 (2010)
Hepatitis B virus induced coupling of
deadhesion and migration of HepG2 cells on thermo-responsive polymer
(1894-1903)
Biomaterials 31 #7 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
09.
Catalysis Communications 11 #5 (2009)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
10.
Cellular
Polymers 28 #5 (2009)
(Titles and Abstracts) (R)
EXTRUSION FOAM COATING OF COAXIAL CABLES USING BUTANE AS PHYSICAL BLOWING AGENT
(303-323)
Cellular
Polymers 28 #5 (2009)
TEN YEAR STORAGE STUDIES ON FLAME RETARDED POLYURETHANE FOAM
(325-343)
Cellular
Polymers 28 #5 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
11.
Chemical Communications #4 (2010)
(Titles, Abstracts and Articles)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
12.
Chemical Engineering Progress 106 #1
(2010)
(Titles and Abstracts) (T)
Trade Journal
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
13.
Chemical Physics 367 #1 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
14.
Chemical Reviews 110 #1 (2010)
(Titles and Abstracts)
Color Control in π-Conjugated Organic Polymers for Use in Electrochromic Devices
(268320)
Chemical Reviews 110 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
15. Chemical
Week
Titles and Abstracts) Weekly (H)
Trade
Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
16.
Chinese Physics B 19 #1 (2010)
(Titles
and Abstracts; Full PDF versions of Articles are available free for 30 days after
publication)
Dynamic analysis of holographic gratings in a
multi-wavelength visible light sensitive photopolymer
(# 014204)
Chinese Physics B 19 #1 (2010)
Abstract
Comments on 'Enhanced piezoresistivity in Ni-silicone
rubber composites'
(# 017001)
Chinese Physics B 19 #1 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
17.
Coatings
World
14 #1 (2010)
(Titles, Abstracts and Articles)
Trade Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
18.
Composite Structures 92 #5 (2010)
(Titles and Abstracts)
Modification of the dielectric properties of
03 ceramicpolymer composites by introducing surface active agents onto the
ceramic filler surface
(1052-1058)
Composite Structures 92 #5 (2010)
Elastomersteel laminate armor
(1059-1064)
Composite Structures 92 #5 (2010)
A methodology for improving shear performance
of marine grade sandwich composites: Sandwich composite panel with shear key
(1065-1072)
Composite Structures 92 #5 (2010)
Dynamic analysis of multi-layered
filament-wound composite pipes subjected to cyclic internal pressure and cyclic
temperature
(1100-1109)
Composite Structures 92 #5 (2010)
A fracture mechanics assessment of surface
cracks existing in protective layers of multi-layer composite pipes
(1120-1125)
Composite Structures 92 #5 (2010)
Transverse vibration of a two-segment cross-ply
composite shafts with a lumped mass
(1126-1131)
Composite Structures 92 #5 (2010)
Stress analysis of multi-phase and multi-layer
plain weave composite structure using global/local approach
(1143-1154)
Composite Structures 92 #5 (2010)
Buckling of the composite laminates containing
through-the-width delaminations using different plate theories
(1176-1183)
Composite Structures 92 #5 (2010)
Experimental analysis of failures in filled
hole compression tests of carbon/epoxy laminate
(1192-1199)Composite Structures 92 #5 (2010)
Seismic evaluation of FRP strengthened RC
buildings subjected to near-fault ground motions having fling step
(1200-1211)
Composite Structures 92 #5 (2010)
Numerical evaluation of the retrofit
effectiveness for GFRP retrofitted concrete slab subjected to blast pressure
(1212-1222)
Composite Structures 92 #5 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
19.
Construction
and Building Materials
24 #3 (2010)
(Titles and Abstracts)
The mechanical properties of asphalt mixtures
with Recycled Concrete Aggregates
(230-235)
Construction
and Building Materials
24 #3 (2010)
Compressive strength and degree of reaction of
biomass- and fly ash-based geopolymer
(236-240)
Construction
and Building Materials
24 #3 (2010)
Analysis of water and thermal sensitivity of
open graded asphalt rubber mixtures
(283-291)
Construction
and Building Materials
24 #3 (2010)
Rheological properties and storage stability of
bitumen/SBS/montmorillonite composites
(300-307)
Construction
and Building Materials
24 #3 (2010)
Cleaned oil-drill cuttings for use as filler in
bituminous mixtures
(322-325)
Construction
and Building Materials
24 #3 (2010)
Synthesis of solgel titania bactericide
coatings on adobe brick
(384-389)
Construction
and Building Materials
24 #3 (2010)
The research for high-performance SBR compound
modified asphalt
(410-418)
Construction
and Building Materials
24 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
20.
Dalton Transactions #4 (2010)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
21.
Engineering Fracture Mechanics 77 #2 (2010)
(Titles and Abstracts)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
22.
Environmental
Science & Technology 44 #2 (2010)
(Titles
and Abstracts)
Flame retardants are the suspected source of a new compound in the environment
(546547)
Environmental Science & Technology 44 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
23.
Fatigue & Fracture of Engineering Materials and Structures 33 #1 (2010)
(Title
and Abstracts)
Fracture behaviour of cracked carbon nanotube-based polymer composites:
Experiments and finite element simulations
(p 87-93)
Fatigue & Fracture of Engineering Materials and Structures 33 #1 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
24.
High Performance
Polymers 21 #6 (2009)
(Titles
and Abstracts)
The Effect of Sulfonation Level and Molecular Weight on
the Tensile Properties of Polyoxadiazoles
(697-708) High
Performance Polymers 21 #6 (2009)
[Abstract]
Ultra-Low CTE and Improved Toughness of PMDA/PDA
Polyimide-based Molecular Composites Containing Asymmetric BPDA-type Polyimides
(709-728) High
Performance Polymers 21 #6 (2009)
[Abstract]
Benzophenone-Type Unsymmetrical Substituted Aromatic
Diamines and Organosoluble Polyimides Therefrom
(729-743)
High Performance Polymers 21 #6 (2009)
[Abstract]
Pendent Polyimides using Mellitic Acid Dianhydride. IV.
Effect of Increased Zirconium-Pendent Group Content on Polymer Properties
(744-764)
High Performance Polymers 21 #6 (2009)
[Abstract]
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
25.
Industrial &
Engineering Chemistry Research 49 #2 (2010)
(Titles and Abstracts) (T)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
26.
Industry and Innovation 16, #6 (2009)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
27.
International Polymer Science and Technology 36, #10 (2009)
(Titles and Abstracts) (H)
FLOW PROPERTIES & CURING BEHAVIOUR IN MOULDS &
MOULD DESIGN
(T/1-T/9)
International Polymer Science and Technology 36, #10 (2009)
NEW TYPE OF HIGH-PERFORMANCE MAGNETIC
NANOCOMPOSITE BASED ON NI-FE FERRITE AND POLYBENZOXAZINE
(T/11-T/15)
International Polymer Science and Technology 36, #10 (2009)
MODIFIED AROMATIC COPOLYESTERS
(T/17-T/21)
International Polymer Science and Technology 36, #10 (2009)
STUDYING FEATURES OF FORMATION OF THE
REFRACTIVE-INDEX DISTRIBUTION PROFILE OF GRADIENT ELEMENTS BASED ON CROSSLINKED
STYRENE COPOLYMERS
(T/23-T/27)
International Polymer Science and Technology 36, #10 (2009)
RADIATION OXIDATION OF POLYMERS BY DISSOLVED
OXYGEN
(T/29-T/33)
International Polymer Science and Technology 36, #10 (2009)
OPTIMISING HIGHLY FILLED EPOXY-WOOD COMPOSITES
(T/35-T/38)
International Polymer Science and Technology 36, #10 (2009)
USING FUNCTIONAL COST ANALYSIS IN SELECTING A
COMPETITIVE, BIOLOGICALLY SAFE ADHESIVE COMPOSITE TO PRODUCE GENERAL-PURPOSE
VENEER
(T/39-T/43)
International Polymer Science and Technology 36, #10 (2009)
PROPERTIES OF A BIODEGRADABLE NANOCOMPOSITE
BASED ON STARCH AND UNMODIFIED CLAY
(T/45-T/50)
International Polymer Science and Technology 36, #10 (2009)
PROPERTIES OF COMPOSITES OF RESORBABLE
POLYESTER "BIOPLASTOTAN" WITH WOLLASTONITE AND HYDROXYAPATITE
(T/51-T/54)
International Polymer Science and Technology 36, #10 (2009)
PROPERTIES OF BITUMENS MODIFIED WITH RECYCLED
POLYMERS
(T/55-T/57)
International Polymer Science and Technology 36, #10 (2009)
PROCESSING OF UNPLASTICISED PVC COMPOSITES
USING METAL-CONTAINING LUBRICANTS
(T/59-T/60)
International Polymer Science and Technology 36, #10 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
28.
Journal of Applied Polymer Science 116 #1 (2010)
(Titles and Abstracts) (H)
Prediction of Hildebrand solubility parameters of
acrylate and methacrylate monomers and their mixtures by molecular simulation
(p 1-9)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Tensile tests of phenol formaldehyde
glass-powder-reinforced composites: Pilot study
(p 10-17)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Effect of crosslinking on the properties of
sodium caseinate films
(p 18-26)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Poly(ethylene terephthalate) foams: Correlation
between the polymer properties and the foaming process
(p 27-35)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Chemical modification of rigid poly(vinyl
chloride) by the substitution with nucleophiles
(p 36-44)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Synergistic effect of melamine polyphosphate with
macromolecular charring agent novolac in wollastonite filled PA66
(p 45-49)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Solid state and proton relaxation NMR study of
Dipteryx alata Vogel
(p 50-54)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Influence of microwave heating on the kinetic of
acrylic acid polymerization and crosslinking
(p 55-63)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Synthesis of soluble and thermally stable
polyamides from diamine containing (quinolin-8-yloxy) aniline pendant group
(p 64-71)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Barrier and mechanical properties of
nanocomposites based on polymer blends and organoclays
(p 72-83)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Hypercrosslinked polystyrene microspheres with
bimodal pore size distribution and controllable macroporosity
(p 84-92)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Effect of potassium persulfate on graft
copolymerization and mechanical properties of cassava starch/natural rubber
foams
(p 93-105)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Shape-memory property and characterization of
epoxy resin-modified Mesua ferrea L. seed oil-based hyperbranched
polyurethane
(p 106-115)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Synergy effect of hybrid fillers on the positive
temperature coefficient behavior of polypropylene/ultra-high molecular weight
polyethylene composites
(p 116-124)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Isothiocyanate derivatives of soybean oil
triglycerides: Synthesis, characterization, and polymerization with polyols and
polyamines
(p 125-131)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Crack propagation behavior and toughness of
V-notched polyethylene terephthalate injection moldings
(p 132-141)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Thermal pressure coefficient of a polyhedral
oligomeric silsesquioxane (POSS)-reinforced epoxy resin
(p 142-146)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Chemical formation, characterization and
properties of polycarbazole
(p 147-154)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract 
Effect of ionic liquids and surfactants on zinc
oxide nanoparticle activity in crosslinking of acrylonitrile butadiene
elastomer
(p 155-164)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Surface modification of silica, titania, and zinc
oxide micro particles with epoxidized soybean oil for preparation of polystyrene
composite films
(p 165-171)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Optical transparency, thermal resistance,
intermolecular interaction, and mechanical properties of
poly(styrene-butadiene-styrene) copolymer-based thermoplastic elastomers
(p 172-178)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Synthesis, characterization, and coordination
behavior of copoly(styrene-maleimide) functionalized with terpyridine
(p 179-183)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Vapor-induced swelling of supported methacrylic
and siloxane polymer films: Determination of interaction parameters
(p 184-190)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Electrical and mechanical properties of carbon
nanotube-epoxy nanocomposites
(p 191-202)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Lipases improve the grafting of poly(ethylene
terephthalate) fabrics with acrylic acid
(p 203-209)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
-Cyclodextrin
stabilized on three-dimensional polyester fabric with different crosslinking
agents
(p 210-217)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Synthesis of starch esters in ionic liquids
(p 218-224)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Effect of the filler size and content on the
thermomechanical properties of particulate aluminum nitride filled epoxy
composites
(p 225-236)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Ethylene-propylene-diene terpolymer/silica
compound modification with organosilane [bis(triethoxysilylpropyl)disulfide] and
improved processability and mechanical properties
(p 237-244)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Deposition of silicon oxide hard coatings by
low-temperature radio-frequency plasmas
(p 245-251)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Poly(9-vinylcarbazole)/silver composite nanotubes
and networks formed at the air-water interface
(p 252-257)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Regulatory effects of Zn(II) on the recognition
properties of metal coordination imprinted polymers
(p 258-266)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Influence of chemical compositions on the
properties of random and multiblock sulfonated poly(arylene ether sulfone)-based
proton-exchange membranes
(p 267-279)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Viscosity effects in the photopolymerization of
two-monomer systems
(p 280-287)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Surface functionalization of PHBV by HEMA
grafting via UV treatment: Comparison with thermal free radical polymerization
(p 288-297)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Solvothermal process for grafting dibutylmaleate
onto poly(ethylene-co-1-octene)
(p 298-303)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Imidazolium salts as liquid coupling agents for
the preparation of polypropylene-silica composites
(p 304-307)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Rapid and efficient removal of heavy metal ions
from aqueous media using cysteine-modified polymer nanowires
(p 308-313)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Synthesis and characterization of
polymer-nanoclay conductive nanocomposites
(p 314-319)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
In-process ultrasonic measurements of orientation
and disorientation relaxation of high-density polyethylene/polyamide-6
composites with compatibilizer
(p 320-327)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Maleic anhydride grafted polyethylene powder
coated with epoxy resin: A novel reactive hot melt adhesive
(p 328-332)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Sustained release of tetracycline from polymeric
periodontal inserts prepared by extrusion
(p 333-336)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Effect of graft-copolymerization with
poly(acrylamide) on rheological and thermal properties of cassava starch
(p 337-346)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Flexural properties of phenolic resin reinforced
with glass powder: Preliminary results
(p 347-354)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
New polymers from plant oil derivatives and
styrene-maleic anhydride copolymers
(p 355-365)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Preparation and evaluation of novel blend
microspheres of poly(lactic-co-glycolic)acid and pluronic F68/127 for
controlled release of repaglinide
(p 366-372)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Effect of surface treatment on the properties of
polypropylene/nanoboehmite composites
(p 373-381)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Crosslinked methyl methacrylate/ethylene glycol
dimethacrylate polymer compounds with a macroazoinitiator
(p 382-393)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
On polyethylene chain generation through chemical
crosslinking of isotactic polypropylene
(p 394-403)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Aggregation behavior of a water-soluble
terpolymer with vinyl biphenyl characterized by a fluorescent probe
(p 404-412)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Graft copolymerization of acrylonitrile and its
amidoxime derivative onto chitosan
(p 413-421)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Poly(vinyl chloride)/metallic oxides/organically
modified montmorillonite nanocomposites: Preparation, morphological
characterization, and modeling of the mechanical properties
(p 422-432)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Synthesis of graft copolymers based on
polyphenylene xylylene and fullerene grafted polystyrene
(p 433-440)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Rheological behavior of noncompatibilized and
compatibilized PP/PET blends with SEBS-g-MA
(p 441-448)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Fabrication and characterization of TiO2/poly(dimethyl
siloxane) composite fibers with thermal and mechanical stability
(p 449-454)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Rigid-rod polybenzoxazoles containing perylene
bisimide: Synthesis, structures and photophysical properties
(p 455-460)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Preparation of regenerated Antheraea yamamai
silk fibroin film and controlled-molecular conformation changes by aqueous
ethanol treatment
(p 461-467)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Study on the properties of nano-TiO2
particles modified silk fibroin porous films
(p 468-472)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Hydrophilic property of polyester fabric coated
with polyethylene glycolated bisphenol A
(p 473-478)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Ring-opening metathesis polymerization of
tetracyclododecene using various catalyst systems
(p 479-485)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Mechanical properties of polycarbonate/modified
acrylonitrile-styrene-acrylate terpolymer blend
(p 486-492)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Moisture effect on deformability of
epoxy/montmorillonite nanocomposite
(p 493-498)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Development and characterization of boron
incorporated linseed oil polyurethanes
(p 499-508)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Studies on new organically modified ceramics
based dental restorative resins
(p 509-517)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Development of epoxy-matrix composite with both
high-thermal conductivity and low-dielectric constant via hybrid filler systems
(p 518-527)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
The effect of process parameters on the size and
morphology of poly(D,L-lactide-co-glycolide)
micro/nanoparticles prepared by an oil in oil emulsion/solvent evaporation
technique
(p 528-534)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Chemical modification of olive pomace by various
esters and silane
(p 535-540)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Reversible electrical behavior with strain for a
carbon black-filled rubber
(p 541-546)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Structure and properties of novel regenerated
cellulose films prepared from cornhusk cellulose in room temperature ionic
liquids
(p 547-554)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Effect of the processing parameters on the
surface resistivity of acrylonitrile-butadiene rubber/multiwalled carbon
nanotube nanocomposites
(p 555-561)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Synthesis and sensitive properties of poly-(bistriethylphosphine)-platinum-diethynylbenzene
for organic vapor detection
(p 562-567)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Multivariable fuzzy decoupling control of the
polymer electromagnetism dynamic extrusion process
(p 568-576)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Isothermal crystallization study on a
biodegradable segmented copolymer constituted by glycolide and trimethylene
carbonate units
(p 577-589)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Emulsion polymerization of isoprene. Estimation
of the branching exponent with the help of a mathematical model
(p 590-601)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
Synthesis and characterization of pH-and
salt-sensitive hydrogel based on chemically modified poultry feather protein
isolate
(p 602-609)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
The influence of carbon black batches on the
fracture behavior of glass fiber reinforced PA6/PA66 blends
(p 610-618)
Journal of Applied Polymer Science 116 #1 (2010)
Abstract
**************************************************
Journal of Applied Polymer Science 116 #2 (2010)
(Titles and Abstracts) (H)
Kinetics of thermal degradation studies of some
new terpolymers derived from 2,4-dihydroxypropiophenone, oxamide, and
formaldehyde
(p 619-627)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Tailoring the swelling and glass-transition
temperature of acrylonitrile/hydroxyethyl acrylate copolymers
(p 628-635)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Adsorption properties of novel chelating resins
containing 2-amino-5-methylthio-1,3,4-thiadizole and hydrophilic spacer arms for
Hg2+ and Ag+
(p 636-644)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Preparation and characterization of a
low-formaldehyde-emission methylol urea/triethanolamine copolymer composite
(p 645-653)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Effects of the molecular weight and concentration
of poly(vinyl alcohol) on slot die coating
(p 654-662)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Annealing effect on poly(vinylidene
fluoride/trifluoroethylene) (70/30) copolymer thin films above the melting
point
(p 663-667)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Electrospinning of antibacterial poly(vinylidene
fluoride) nanofibers containing silver nanoparticles
(p 668-672)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Microstructural behaviors of polyaniline/CB
Composites by SAXS
(p 673-679)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Compatible and crystallization properties of
poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends
(p 680-687)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Preparation and properties of polyhydroxybutyrate
blended with different types of starch
(p 688-694)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Features of structure formation and
electrophysical properties of poly(vinylidene fluoride) crystalline
ferroelectric polymers
(p 695-707)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Drug loading onto and release from wheat gluten
fibers
(p 708-717)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Modification of poly(3-hydroxybutyrate)-co-poly(3-hydroxyvalerate)
with natural rubber
(p 718-726)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Synthesis and properties of copolymer of
3-thienylmethyl disulfide and benzyl disulfide for cathode material in lithium
batteries
(p 727-735)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Preparation and characterization of acrylic
polymers based on a novel acrylic monomer produced from vegetable oil
(p 736-742)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Light cured fluoride filled denture-coating
materials
(p 743-747)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Influence of a hindered amine stabilizer on
optical and mechanical properties of poly(methyl methacrylate) exposed to gamma
irradiation
(p 748-753)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Improving the aging resistance of
styrene-butadiene-styrene tri-block copolymer and application in
polymer-modified asphalt
(p 754-761)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Fabrication and biocompatibility of porously
bioactive scaffold of nonstoichiometric apatite and poly(
-caprolactone)
nanocomposite
(p 762-770)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Influence of polyurethane properties on
mechanical performances of magnetorheological elastomers
(p 771-778)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Preparation of nano-TiO2/polystyrene
hybride microspheres and their antibacterial properties
(p 779-784)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Influence of the solvent evaporation rate on the
crystalline phases of solution-cast poly(vinylidene fluoride) films
(p 785-791)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
The effect of
bicyclo[2.2.1]hept-5-ene-2,3-dicarboxylate on the mechanical properties and
crystallization behaviors of isotactic polypropylene
(p 792-800)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Cyclic dithia/diaza with dual Schiff base linkage
functionalized polymers for heavy metal adsorption
(p 801-809)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Inhibitive effect of polyacrylamide grafted with
fenugreek mucilage on corrosion of mild steel in 0.5 M H2SO4
at 35°C
(p 810-816)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Preparation and properties of highly branched
waterborne poly(urethane-urea) via A2
+ B3 approach
(p 817-824)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Systematic evaluation of the preparation of
conducting PANI/ABS blends
(p 825-831)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Preparation of polyurethane/hectorite,
polyurethane/montmorillonite, and polyurethane/laponite nanocomposites without
organic modifiers
(p 832-837)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Positive temperature coefficient properties of
multiwall carbon nanotubes/poly(vinylidene fluoride) nanocomposites
(p 838-842)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Studies on dry-jet-wet spun polyurethane fibers.
II. Effect of polyurethane shore hardness on spinnability and fiber properties
(p 843-851)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Preparation and characterization of
poly(vinylidene fluoride)/sulfonated poly(phthalazinone ether sulfone ketone)
blends for proton exchange membrane
(p 852-860)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Biodegradable polyesterurethane networks for
controlled release of aspirin
(p 861-867)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Microwave plasma-initiated grafting of acrylic
acid on Celgard 2500 membrane to prepare alkaline battery
separators - Characteristics of process and product
(p 868-875)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Biophysical studies on bone cement composites
based on polyester fumarate
(p 876-885)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Irradiation grafting of methyl methacrylate
monomer onto ultra-high-molecular-weight polyethylene: An experimental design
approach for improving adhesion to bone cement
(p 886-894)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Effect of platinum salt concentration on the
electrospinning of polyacrylonitrile/platinum acetylacetonate solution
(p 895-901)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Nonisothermal crystallization behavior and
mechanical properties of poly(butylene succinate)/silica nanocomposites
(p 902-912)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Preparation and cured properties of diallyl
phthalate resin modified with epoxy resin and allyl ester compound having
carboxylic acid
(p 913-919)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Improved mechanical properties and special
reinforcement mechanism of natural rubber reinforced by in situ
polymerization of zinc dimethacrylate
(p 920-928)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Poly(ethylene glycol)/poly(methyl methacrylate)
blends as novel form-stable phase-change materials for thermal energy storage
(p 929-933)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Synthesis and characterization of
polyaniline/silica doped with camphorsulfonic acid and dodecylbenzylsulfonic
acid
(p 934-945)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Poly(vinyl chloride)/metallic oxides/organically
modified montmorillonite nanocomposites: Fire and smoke behavior
(p 946-958)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Comparative delivery of Diltiazem hydrochloride
through synthesized polymer: Hydrogel and hydrogel microspheres
(p 959-968)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Chemorheological study of DGEBA/IPD system for
reactive rotational molding (RRM)
(p 969-976)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Synthesis and characterization of
poly(ester-ether-imide)s derived from
5-(4-trimellitimidophenoxy)-1-trimellitimido naphthalene
(p 977-985)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Open porous emulsion-templated monoliths: Effect
of the emulsion preparation conditions on the foam microstructure and
properties
(p 986-994)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Sulfonated poly(ether ether ketone)-induced
porous poly(ether sulfone) blend membranes for the separation of proteins and
metal ions
(p 995-1004)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Influence of the coagulation-bath temperature on
the phase-separation process of poly(vinylidene fluoride)-graft-poly(N-isopropylacrylamide)
solutions and membrane structures
(p 1005-1009)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Effect of nanoclay on the morphology and
properties of poly(methyl methacrylate)/high-density polyethylene blends
(p 1010-1020)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
In situ preparation, electrospinning, and
characterization of polyacrylonitrile nanofibers containing silver
nanoparticles
(p 1021-1029)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Morphologies and electrical properties of
electrospun poly[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyvalerate]/
multiwalled carbon nanotubes fibers
(p 1030-1035)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
The effects of the pH value of the swelling
medium on the kinetics of the swelling of a poly(acrylic acid) hydrogel
(p 1036-1043)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Mechanical and thermal properties of EVA blended
with biodegradable ethyl cellulose
(p 1044-1056)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Short-term and long-term performance of
thermosets exposed to water at elevated temperatures
(p 1057-1067)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Comparison of nanoclay and carbon nanofiber
particles on rheology of molten polystyrene nanocomposites under supercritical
carbon dioxide
(p 1068-1076)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Non-isothermal cold crystallization kinetics and
morphology of PET + SAN blends
(p 1077-1087)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Effect of different thermal treatments on the
mechanical performance of poly(L-lactic
acid) based eco-composites
(p 1088-1098)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Synthesis and solution properties of
temperature-sensitive copolymers based on NIPAM
(p 1099-1105)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Mechanical and acoustic performance of
compression-molded open-cell polypropylene foams
(p 1106-1115)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Effect of nucleation agents on the
crystallization of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P3/4HB)
(p 1116-1123)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
A study on the nonuniform deformation of PTFE
membrane during its tentering transverse stretching
(p 1124-1130)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Hydride addition of methylhydridesiloxanes to
conjugated cyclohexa-1,3-diene
(p 1131-1137)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Synthesis and characterization of
polyaniline/graphite composites and study of their electrical and
electrochemical properties
(p 1138-1145)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Role of internal additives in the friction and
wear of carbon-fiber-reinforced polyimide
(p 1146-1156)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
The synthesis of water soluble cationic microgels
by dispersion polymerization: Their performance in kaolin deposition onto fiber
(p 1157-1164)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Effect of poly(acrylic acid) end-group
functionality on inhibition of calcium oxalate crystal growth
(p 1165-1171)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
The effect of propylene-ethylene copolymers with
different comonomer content on melting and crystallization behavior of
polypropylene
(p 1172-1183)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Preparation of functionalized Kraft lignin beads
(p 1184-1189
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Accelerated crystallization of poly(L-lactide)
by physical aging
(p 1190-1196)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Poly(pyridinium salt)s with organic counterions
derived from an aromatic diamine containing tetraoxyethylene units exhibiting
amphotropic liquid-crystalline and photoluminescence properties
(p 1197-1206)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Thermal properties of acrylonitrile/itaconic acid
polymers in oxidative and nonoxidative atmospheres
(p 1207-1212)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Investigations on the electrical and structural
properties of PVA doped with (NH4)2SO4
(p 1213-1217)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Effective method for dispersing SiO2
nanoparticles into polyethylene
(p 1218-1225)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
Controlled release of theophylline from
interpenetrating blend microspheres of poly(vinyl alcohol) and methyl cellulose
(p 1226-1235)
Journal of Applied Polymer Science 116 #2 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
29.
Journal
of Macromolecular Science, Part B - Physics
49 #1 (2010)
(Titles and Abstracts)
Grafted Polyolefin-Coated Synthetic Mica-Filled Polypropylene-co-ethylene
Composites: A Study on the Interfacial Morphology and Properties
(1 17)
Journal
of Macromolecular Science, Part B - Physics
49 #1 (2010)
Hybrid Polyurethane-Poly(2-hydroxyethyl methacrylate) Semi-IPNSilica
Nanocomposites: Interfacial Interactions and Glass Transition Dynamics
(18 32)
Journal
of Macromolecular Science, Part B - Physics
49 #1 (2010)
The Construction of Sandbag Microstructure in Polyamide 6/EthylenePropyleneDiene
Terpolymer/Nanometer Calcium Carbonate Ternary Composite
(33 42)
Journal
of Macromolecular Science, Part B - Physics
49 #1 (2010)
Studies on the Thermal Properties of Epoxy Resins Modified with Two Kinds of
Silanes
(43 56)
Journal
of Macromolecular Science, Part B - Physics
49 #1 (2010)
Rheology Study of Chlorinated Polyethylene with Various Cl-Contents and Carbon
Nanotube Composites
(57 65)
Journal
of Macromolecular Science, Part B - Physics
49 #1 (2010)
A Comparative Study on In vitro Degradation Behaviors of
Poly(L-lactide-co-glycolide) Scaffolds and Films
(66 74)
Journal
of Macromolecular Science, Part B - Physics
49 #1 (2010)
Preparation, Characterization, and Properties of Pre-irradiated Linear
Low-Density Polyethylene Grafted Itaconic Anhydride by Reactive Extrusion
(75 85)
Journal
of Macromolecular Science, Part B - Physics
49 #1 (2010)
Polymer Dynamics in Polyurethane/clay Nanocomposites Studied by Dielectric and
Thermal Techniques
(86 110)
Journal
of Macromolecular Science, Part B - Physics
49 #1 (2010)
Tubular Clay Composites with High Strength and Transparency
(111 121)
Journal
of Macromolecular Science, Part B - Physics
49 #1 (2010)
Electrospinning Mechanism for Producing Nanoscale Polymer Fibers
(122 131)
Journal
of Macromolecular Science, Part B - Physics
49 #1 (2010)
Thermal and Tensile Properties of Epoxy Nanocomposites Reinforced by Silane-functionalized
Multiwalled Carbon Nanotubes
(132 142)
Journal
of Macromolecular Science, Part B - Physics
49 #1 (2010)
Effect of Ultrafine Full-Vulcanized Powdered Rubber on the Properties of the
Intumescent Fire Retardant Polypropylene
(143 154)
Journal
of Macromolecular Science, Part B - Physics
49 #1 (2010)
Stacked-Lamellar Structure in High-Speed Spun PET Fibers as Revealed by TEM
(155 162)
Journal
of Macromolecular Science, Part B - Physics
49 #1 (2010)
Effects of Viscosity Ratio on Morphological, Rheological and Mechanical
Properties of PP/PBT Melt Spun Alloy Fibers
(163 173)
Journal
of Macromolecular Science, Part B - Physics
49 #1 (2010)
Chain Degradation during Dissolution of Polymer-Fullerene Nanocomposites as a
Result of Interaction of Entangled Polymer Matrix with the Filler
(174 206)
Journal
of Macromolecular Science, Part B - Physics
49 #1 (2010)
Effect of Alkyl Side Chain on the Conformational Properties of Polysulfones with
Quaternary Groups
(207 217)
Journal
of Macromolecular Science, Part B - Physics
49 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
30. Journal of Materials
Science 45 #6 (2010)
(Titles and Abstracts) (H)
Assessment of interface damage during the deformation of carbon nanotube
composites
(1425-1431)
Journal of Materials Science 45 #6 (2010)
Effect of interface structures on the fracture behavior of two-dimensional
carbon/carbon composites by isothermal chemical vapor infiltration
(1432-1437)
Journal of Materials Science 45 #6 (2010)
Synthesis and characterization of mesoporous silica/poly(N-isopropylacrylamide)
functional hybrid useful for drug delivery
(1478-1486)
Journal of Materials Science 45 #6 (2010)
Synthesis and characterization of poly(ether sulfone ether ketone ketone)
grafted poly(sulfopropyl methacrylate) for proton exchange membranes via atom
transfer radical polymerization
(1610-1616)
Journal of Materials Science 45 #6 (2010)
Synthesis of shape-stabilized paraffin/silicon dioxide composites as phase
change material for thermal energy storage
(1672-1676)
Journal of Materials Science 45 #6 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
31.
Journal of Polymer Science Part A: Polymer Chemistry 48 #4 (2010)
(Titles and Abstracts) (H)
Preparation and characterization of monodisperse
CdS quantum dot-polymer microspheres
(p 751-755)
Journal of Polymer Science Part A: Polymer Chemistry 48 #4 (2010)
Abstract
Poly(terthiophene)s from copolymer precursors via
solid-state oxidative conversion
(p 756-763)
Journal of Polymer Science Part A: Polymer Chemistry 48 #4 (2010)
Abstract
Polymeric dopant effects of bent-core
covalent-bonded and hydrogen-bonded structures on banana-shaped liquid
crystalline complexes
(p 764-774)
Journal of Polymer Science Part A: Polymer Chemistry 48 #4 (2010)
Abstract
Thermoresponsive terpolymers based on
methacrylate monomers: Effect of architecture and composition
(p 775-783)
Journal of Polymer Science Part A: Polymer Chemistry 48 #4 (2010)
Abstract
Micellar behavior of well-defined
polystyrene-based block copolymers with triethoxysilyl reactive groups and their
hydrolysis-condensation
(p 784-793)
Journal of Polymer Science Part A: Polymer Chemistry 48 #4 (2010)
Abstract
Synthesis and properties of high-molecular-weight
stereo di-block polylactides with nonequivalent D/L ratios
(p 794-801)
Journal of Polymer Science Part A: Polymer Chemistry 48 #4 (2010)
Abstract
Reversible coordinative chain transfer
polymerization of styrene by rare earth borohydrides, chlorides/dialkylmagnesium
systems
(p 802-814)
Journal of Polymer Science Part A: Polymer Chemistry 48 #4 (2010)
Abstract
Facile synthesis of blocky styrene(1,3)-butadiene
copolymers having stereoregular monomeric sequences
(p 815-822)
Journal of Polymer Science Part A: Polymer Chemistry 48 #4 (2010)
Abstract
Facile synthesis of amphiphilic gels by frontal
free-radical polymerization
(p 823-831)
Journal of Polymer Science Part A: Polymer Chemistry 48 #4 (2010)
Abstract
Synthesis of polymeric 1-iminopyridinium ylides
as photoreactive polymers
(p 832-844)
Journal of Polymer Science Part A: Polymer Chemistry 48 #4 (2010)
Abstract
Three-component polyaddition of diamines, carbon
disulfide, and diacrylates in water
(p 845-851)
Journal of Polymer Science Part A: Polymer Chemistry 48 #4 (2010)
Abstract
Effect of oligonucleotide conformation on its
facilitation efficiency on negatively charged micelle-to-vesicle transition
(p 852-860)
Journal of Polymer Science Part A: Polymer Chemistry 48 #4 (2010)
Abstract
Synthesis and gas permeation properties of
poly(diarylacetylene)s having substituted and twisted biphenyl moieties
(p 861-868)
Journal of Polymer Science Part A: Polymer Chemistry 48 #4 (2010)
Abstract
Quinoline-containing networks from enone and
aldehyde triglyceride derivatives
(p 869-878)
Journal of Polymer Science Part A: Polymer Chemistry 48 #4 (2010)
Abstract
Preparation, characterization, and electrical
properties of dual-emissive Langmuir-Blodgett films of some europium-substituted
polyoxometalates and a platinum polyyne polymer
(p 879-888)
Journal of Polymer Science Part A: Polymer Chemistry 48 #4 (2010)
Abstract
Influence of structural features on the
self-assembly of short ionic oligopeptides
(p 889-897)
Journal of Polymer Science Part A: Polymer Chemistry 48 #4 (2010)
Abstract
Chiral arylnickel complexes as highly active
initiators for screw-sense selective living polymerization of
1,2-diisocyanobenzenes
(p 898-904)
Journal of Polymer Science Part A: Polymer Chemistry 48 #4 (2010)
Abstract
Effects of tetracarboxylic dianhydrides on the
properties of sulfonated polyimides
(p 905-915)
Journal of Polymer Science Part A: Polymer Chemistry 48 #4 (2010)
Abstract
Living cationic polymerization of isobutyl vinyl
ether using a variety of metal oxides as heterogeneous catalysts: Robust,
reusable, and environmentally benign initiating systems
(p 916-926)
Journal of Polymer Science Part A: Polymer Chemistry 48 #4 (2010)
Abstract
Intrastrand foldamer crosslinking by reductive
amination
(p 927-935)
Journal of Polymer Science Part A: Polymer Chemistry 48 #4 (2010)
Abstract
The preparation of amphiphilic core-shell
nanospheres by using water-soluble macrophotoinitiator
(p 936-942)
Journal of Polymer Science Part A: Polymer Chemistry 48 #4 (2010)
Abstract
Synthesis of statistical and block copolymers
containing adamantyl and norbornyl moieties by reversible addition-fragmentation
chain transfer polymerization
(p 943-951)
Journal of Polymer Science Part A: Polymer Chemistry 48 #4 (2010)
Abstract
Living/controlled cationic cyclopolymerization of
divinyl ether with a cyclic acetal moiety: Synthesis of poly(vinyl ether)s with
high glass transition temperature based on incorporation of cyclized main chain
and cyclic side chains
(p 952-958)
Journal of Polymer Science Part A: Polymer Chemistry 48 #4 (2010)
Abstract
Controlled ring-opening polymerization of lactide
by bis-sulfonamide/amine associations: Cooperative hydrogen-bonding catalysis
(p 959-965)
Journal of Polymer Science Part A: Polymer Chemistry 48 #4 (2010)
Abstract
Hypervalent iodine-mediated direct azidation of
polystyrene and consecutive click-type functionalization
(p 966-974)
Journal of Polymer Science Part A: Polymer Chemistry 48 #4 (2010)
Abstract
Self-assembly of daisy chain oligomers from
heteroditopic molecules containing secondary ammonium ion and crown ether
moieties
(p 975-985)
Journal of Polymer Science Part A: Polymer Chemistry 48 #4 (2010)
Abstract
Hydrogel scaffolds by self-assembly of a
complementary ionic tetrapeptide
(p 986-990)
Journal of Polymer Science Part A: Polymer Chemistry 48 #4 (2010)
Abstract
Magnetic polyvinylamine nanoparticles by in
situ precipitation reaction
(p 991-996)
Journal of Polymer Science Part A: Polymer Chemistry 48 #4 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
32.
Journal of Polymer Science B: Polymer Physics 48, #4 (2010)
(Titles and Abstracts)
Nucleation effect of
cyclodextrin inclusion complexes on the crystallization of isotactic
poly(1-butene)
(p 389-395) Journal
of Polymer Science B: Polymer Physics 48, #4 (2010)
Abstract
Dimensional stability of
sparse network microstructures formed by photopolymerization-induced phase
separation
(p 396-410) Journal
of Polymer Science B: Polymer Physics 48, #4 (2010)
Abstract
Crystallization-induced aging
in poly(trimethylene terephthalate)/ poly(ethylene oxide terephthalate)
segmented block copolymers
(p 411-416) Journal
of Polymer Science B: Polymer Physics 48, #4 (2010)
Abstract
Thermal and mechanical
properties of a dendritic hydroxyl-functional hyperbranched polymer and
tetrafunctional epoxy resin blends
(p 417-424) Journal
of Polymer Science B: Polymer Physics 48, #4 (2010)
Abstract
Preparation and properties of
biocomposites composed of bio-based epoxy resin, tannic acid, and
microfibrillated cellulose
(p 425-433) Journal
of Polymer Science B: Polymer Physics 48, #4 (2010)
Abstract
Enhanced mobility and
increased gas sorption capacity in thin film and nanoconduit confined polymers
(p 434-441) Journal
of Polymer Science B: Polymer Physics 48, #4 (2010)
Abstract
Effect of molecular weight
and substrate on silicone segregation from UV resin at plasma polymerized mold
interface
(p 442-450) Journal
of Polymer Science B: Polymer Physics 48, #4 (2010)
Abstract
Optical characterization of
polycarbonate: Influence of additives on optical properties
(p 451-455) Journal
of Polymer Science B: Polymer Physics 48, #4 (2010)
Abstract
Solubility and partial molar
volume of carbon dioxide and ethane in crosslinked poly(ethylene oxide)
copolymer
(p 389-395) Journal
of Polymer Science B: Polymer Physics 48, #4 (2010)
Abstract
Nucleation of isotactic
polypropylene crystallization by gold nanoparticles
(p 469-478) Journal
of Polymer Science B: Polymer Physics 48, #4 (2010)
Abstract
Relations between the aspect
ratio of carbon nanotubes and the formation of percolation networks in
biodegradable polylactide/carbon nanotube composites
(p 479-489) Journal
of Polymer Science B: Polymer Physics 48, #4 (2010)
Abstract
Enhanced dielectric response
in P(VDF-TrFE) based all-organic nanocomposites
(p 490-495)
Journal of Polymer Science B: Polymer Physics 48, #4 (2010)
Abstract
Multicolor single-layer
electroluminescence device using poly(L-glutamate) for hole transport
(p 496-502)
Journal of Polymer Science B: Polymer Physics 48, #4 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
33.
Macromolecular Chemistry and Physics 211 #2 (2010)
(Titles and Abstracts)
Review
Functional Amyloids Used by Organisms: A Lesson in Controlling Assembly
(p 127-135)
Macromolecular Chemistry and Physics 211 #2 (2010)
Abstract
Protein Biochips: Oriented Surface Immobilization
of Proteins
(p 136-144)
Macromolecular Chemistry and Physics 211 #2 (2010)
Abstract
Preparation of Defined Albumin-Polymer Hybrids
for Efficient Cell Transfection
(p 146-153)
Macromolecular Chemistry and Physics 211 #2 (2010)
Abstract
Polyethylene Prodrugs Using Precisely Placed
Pharmaceutical Agents
(p 154-165)
Macromolecular Chemistry and Physics 211 #2 (2010)
Abstract
Biomimetic Principles in Polymer and Material
Science
(p 166-170)
Macromolecular Chemistry and Physics 211 #2 (2010)
Abstract
Synthesis and Structure-Efficiency Relations of
1,3,5-Benzenetrisamides as Nucleating Agents and Clarifiers for Isotactic
Poly(propylene)
(p 171-181)
Macromolecular Chemistry and Physics 211 #2 (2010)
Abstract
Controlled Change of Mechanical Properties during
Hydrolytic Degradation of Polyester Urethane Networks
(p 182-194)
Macromolecular Chemistry and Physics 211 #2 (2010)
Abstract
Tailormade Microfluidic Devices Through
Photochemical Surface Modification
(p 195-203)
Macromolecular Chemistry and Physics 211 #2 (2010)
Abstract
Synthesis and Organization of Three-Arm-Star
PIB-PEO Block Copolymers at the Air/Water Interface: Langmuir- and
Langmuir-Blodgett Film Investigations
(p 204-214)
Macromolecular Chemistry and Physics 211 #2 (2010)
Abstract
Bioinspired Block Copolymers: Translating
Structural Features from Proteins to Synthetic Polymers
(p 215-221)
Macromolecular Chemistry and Physics 211 #2 (2010)
Abstract
Plastic
Trash goes Biohybrid
- Rapid
and Selective Functionalization of Inert Plastic Surfaces with Biomolecules
(p 222-228)
Macromolecular Chemistry and Physics 211 #2 (2010)
Abstract
Amphiphilic Copolymer Membranes Promote
NADH:Ubiquinone Oxidoreductase Activity: Towards an Electron-Transfer Nanodevice
(p 229-238)
Macromolecular Chemistry and Physics 211 #2 (2010)
Abstract
Biocatalytic Approach for the Synthesis of
Glycerol-Based Macroamphiphiles and their Self-Assembly to Micellar
Nanotransporters
(p 239-244)
Macromolecular Chemistry and Physics 211 #2 (2010)
Abstract
New Generation of Polymeric Drugs: Copolymer from
NIPAAM and Cyclodextrin Methacrylate Containing Supramolecular-Attached
Antitumor Derivative
(p 245-249)
Macromolecular Chemistry and Physics 211 #2 (2010)
Abstract
Lamellar Nanoconfinements Effects in Discotic
Liquid Crystalline Block Copolymers
(p 250-258)
Macromolecular Chemistry and Physics 211 #2 (2010)
Abstract
Fabrication of Artificial Petal Sculptures by
Replication of Sub-micron Surface Wrinkles
(p 259-264)
Macromolecular Chemistry and Physics 211 #2 (2010)
Abstract
In Vitro Study of Dexamethasone Release From
Poly(p-xylylene) Films
(p 265-269)
Macromolecular Chemistry and Physics 211 #2 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
34.
Macromolecular Materials and Engineering 295 #1 (2010)
(Titles and Abstracts)
Review
Extrusion Processing and Properties of Protein-Based Thermoplastics
(p 10-21)
Macromolecular Materials and Engineering 295 #1 (2010)
Abstract
Alternating Encapsulation of Water-Soluble
Components in a One-Dimensional Structure
(p 22-25)
Macromolecular Materials and Engineering 295 #1 (2010)
Abstract
Fabrication of Regularly Patterned Microporous
Films by Self-Organization of an Amphiphilic Liquid-Crystalline Diblock
Copolymer in a Dry Environment
(p 26-31)
Macromolecular Materials and Engineering 295 #1 (2010)
Abstract
Switchable Wettability of Thermo-Responsive
Biocompatible Nanofibrous Films Created by Electrospinning
(p 32-36)
Macromolecular Materials and Engineering 295 #1 (2010)
Abstract
Synergistic Reinforcement of Highly Oriented
Poly(propylene) Tapes by Sepiolite Nanoclay
(p 37-47)
Macromolecular Materials and Engineering 295 #1 (2010)
Abstract
Effect of the Hierarchical Structure in
Poly(propylene)/Clay Composites on their Thermal Stability: From Single- to
Multi-Step Degradation Processes
(p 48-57)
Macromolecular Materials and Engineering 295 #1 (2010)
Abstract
Characterization of Low-Molecular-Weight PLA
using HPLC
(p 58-66)
Macromolecular Materials and Engineering 295 #1 (2010)
Abstract
Modification of EPDM with Alkylphenol Polysulfide
for Use in Tire Sidewalls, 1 - Mechanical Properties
(p 67-75)
Macromolecular Materials and Engineering 295 #1 (2010)
Abstract
Modification of EPDM with Alkylphenol Polysulfide
for Use in Tire Sidewalls, 2 - Mechanistic and Morphological Characterizations
(p 76-83)
Macromolecular Materials and Engineering 295 #1 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
35.
Macromolecular Rapid Communications 31 #1 (2010)
(Titles and Abstracts)
Review
Advances in Dielectric Elastomers for Actuators and Artificial Muscles
(p 10-36)
Macromolecular Rapid Communications 31 #1 (2010)
Abstract
Using Metallo-Supramolecular Block Copolymers for
the Synthesis of Higher Order Nanostructured Assemblies
(p 37-52)
Macromolecular Rapid Communications 31 #1 (2010)
Abstract
Effect of Gold Nanoparticles on the
Thermosensitivity, Morphology, and Optical Properties of Poly(acrylamide-acrylic
acid) Microgels
(p 54-58)
Macromolecular Rapid Communications 31 #1 (2010)
Abstract
Single-Step Electrospinning of Bimodal Fiber
Meshes for Ease of Cellular Infiltration
(p 59-64)
Macromolecular Rapid Communications 31 #1 (2010)
Abstract
Morphology and pH Sensing Characteristics of New
Luminescent Electrospun Fibers Prepared from Poly(phenylquinoline)-block-Polystyrene/Polystyrene
Blends
(p 65-70)
Macromolecular Rapid Communications 31 #1 (2010)
Abstract
Immobilization of Candida antarctica
lipase B on Polystyrene Nanoparticles
(p 71-74)
Macromolecular Rapid Communications 31 #1 (2010)
Abstract
A Novel Type of Vesicles Based on Ionic and
-
Interactions
(p 75-80)
Macromolecular Rapid Communications 31 #1 (2010)
Abstract
Self-Assembled Micelles Based on PEG-Polypeptide
Hybrid Copolymers for Drug Delivery
(p 81-86)
Macromolecular Rapid Communications 31 #1 (2010)
Abstract
Fluorinated Copolymer Nanoparticles for
Multimodal Imaging Applications
(p 87-92)
Macromolecular Rapid Communications 31 #1 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
36.
Macromolecules 43 #1 (2010)
(Titles and Abstracts)
Macromolecular Engineering through Click Chemistry and Other Efficient
Transformations
(113)
Macromolecules 43 #1 (2010)
Nonfouling Polyampholytes from an Ion-Pair Comonomer with Biomimetic Adhesive
Groups
(1416)
Macromolecules 43 #1 (2010)
Copper-Catalyzed vs Thermal Step Growth Polymerization of Starch-Derived
α-Azide−ω-Alkyne Dianhydrohexitol Stereoisomers: To Click or Not To Click?
(1719)
Macromolecules 43 #1 (2010)
Combining Thio−Bromo Click Chemistry and RAFT Polymerization: A Powerful Tool
for Preparing Functionalized Multiblock and Hyperbranched Polymers
(2024)
Macromolecules 43 #1 (2010)
Strain-Induced Enthalpy Relaxation in Poly(lactic acid)
(2528)
Macromolecules 43 #1 (2010)
Influence of Fragility on Polymer Cold Crystallization
(2932)
Macromolecules 43 #1 (2010)
Ambient Temperature Synthesis of a Versatile Macromolecular Building Block:
Cyclopentadienyl-Capped Polymers
(3336)
Macromolecules 43 #1 (2010)
Broadening Absorption in Conductive Polymers through Cross-linkable Side Chains
in a Nonconjugated Polymer Backbone
(3743)
Macromolecules 43 #1 (2010)
Facile Synthesis of Functional Periodic Copolymers: A Step toward Polymer-Based
Molecular Arrays.
(4450)
Macromolecules 43 #1 (2010)
Easy Access to the RAFT Equilibrium Constant
(5154)
Macromolecules 43 #1 (2010)
Novel Strategy To Design Magnetic, Molecular Imprinted Polymers with
Well-Controlled Structure for the Application in Optical Sensors
(5561)
Macromolecules 43 #1 (2010)
Preparation of Organosoluble Silica−Polypeptide Particles by Click Chemistry
(6270)
Macromolecules 43 #1 (2010)
Synthesis of Polymer Thin Film Gradient with Nanometer Thickness through Water
Diffusion Controlled Surface Polymerization
(7176)
Macromolecules 43 #1 (2010)
Synthesis of a Bifunctional Initiator for Controlled Kumada Catalyst-Transfer
Polycondensation/Nitroxide-Mediated Polymerization and Preparation of
Poly(3-hexylthiophene)−Polystyrene Block Copolymer Therefrom
(7781)
Macromolecules 43 #1 (2010)
Synthesis and Properties of Tetrathiafulvalene End-Functionalized Polymers
Prepared via RAFT Polymerization
(8290)
Macromolecules 43 #1 (2010)
Radical Chain End Chemical Transformation of SG1-Based Polystyrenes
(91100)
Macromolecules 43 #1 (2010)
Highly Conjugated Thiophene Derivatives as New Visible Light Sensitive
Photoinitiators for Cationic Polymerization
(101106)
Macromolecules 43 #1 (2010)
Living Anionic Polymerization of N-Methacryloylazetidine: Anionic
Polymerizability of N,N-Dialkylmethacrylamides
(107116)
Macromolecules 43 #1 (2010)
Convenient Synthesis of PtBA-g-PMA Well-Defined Graft Copolymer with Tunable
Grafting Density
(117125)
Macromolecules 43 #1 (2010)
Chlorination, Iodination, and Silylation of
Poly(2,2′-dioxy-1,1′-biphenylphosphazene). New Halogenated Polyphosphazenes with
Sterically Hindered Reactivity
(126130)
Macromolecules 43 #1 (2010)
Diphenolic 9,9-Diarylfluorene Trimers and Derivatives Possessing Flexible
Alkylene Chain Spacers: Synthesis of the Monomers, Their Polymerization, and
Properties of the Resulting Polymers
(131136)
Macromolecules 43 #1 (2010)
Triphenylene-Based Polymers for Blue Polymeric Light Emitting Diodes
(137143)
Macromolecules 43 #1 (2010)
Polyester Synthesis at Moderate Temperatures via the Direct Polycondensation of
Dicarboxylic Acids and Diols Catalyzed by Rare-Earth Perfluoroalkanesulfonates
and Bis(perfluoroalkanesulfonyl)imides
(144149)
Macromolecules 43 #1 (2010)
Polyanionic Aryl Ether Metallodendrimers Based on Cobaltabisdicarbollide
Derivatives. Photoluminescent Properties
(150159)
Macromolecules 43 #1 (2010)
Dual Responsive Methacrylic Acid and Oligo(2-ethyl-2-oxazoline) Containing Graft
Copolymers
(160167)
Macromolecules 43 #1 (2010)
Effective Synthesis of Polymer Catenanes by Cooperative
Electrostatic/Hydrogen-Bonding Self-Assembly and Covalent Fixation
(168176)
Macromolecules 43 #1 (2010)
Kinetic Study of Photoinitiated Frontal Polymerization. Influence of UV Light
Intensity Variations on the Conversion Profiles
(177184)
Macromolecules 43 #1 (2010)
Preparation of Sodium-Capped Poly(lactic acid) Oligomers by Catalytic Initiation
with a Sodium α-, β-, or γ-Hydroxyacids
(185192)
Macromolecules 43 #1 (2010)
Aromatic Ring-Fused BODIPY-Based Conjugated Polymers Exhibiting Narrow
Near-Infrared Emission Bands
(193200)
Macromolecules 43 #1 (2010)
Versatile Synthesis of Functional Biodegradable Polymers by Combining
Ring-Opening Polymerization and Postpolymerization Modification via Michael-Type
Addition Reaction
(201207)
Macromolecules 43 #1 (2010)
Heterotelechelic Ring-Opening Metathesis Polymers
(208212)
Macromolecules 43 #1 (2010)
Monotelechelic Poly(oxa)norbornenes by Ring-Opening Metathesis Polymerization
Using Direct End-Capping and Cross-Metathesis
(213221)
Macromolecules 43 #1 (2010)
Homopolymers and Block Copolymers of
p-Phenylenevinylene-2,5-diethylhexyloxy-p-phenylenevinylene and
m-Phenylenevinylene-2,5-diethylhexyloxy-p-phenylenevinylene by Ring-Opening
Metathesis Polymerization
(222232)
Macromolecules 43 #1 (2010)
High Surface Area Poly(3-hexylthiophenes) Thin Films from Cleavable Graft
Copolymers
(233241)
Macromolecules 43 #1 (2010)
Polypseudopeptides with Variable Stereochemistry: Synthesis via Click-Chemistry,
Postfunctionalization, and Conformational Behavior in Solution
(242248)
Macromolecules 43 #1 (2010)
Photochromic Polymer Conjugates: The Importance of Macromolecular Architecture
in Controlling Switching Speed within a Polymer Matrix
(249261)
Macromolecules 43 #1 (2010)
PAA-g-PPO Amphiphilic Graft Copolymer: Synthesis and Diverse Micellar
Morphologies
(262270)
Macromolecules 43 #1 (2010)
Synthesis of Ternary, Hydrophilic−Lipophilic−Fluorophilic Block Copolymers by
Consecutive RAFT Polymerizations and Their Self-Assembly into Multicompartment
Micelles
(271281)
Macromolecules 43 #1 (2010)
Synthesis, Nanostructure, Functionality, and Application of
Polyfluorene-block-poly(N-isopropylacrylamide)s
(282291)
Macromolecules 43 #1 (2010)
Anisotropic Proton Conduction in Aligned Block Copolymer Electrolyte Membranes
at Equilibrium with Humid Air
(292298)
Macromolecules 43 #1 (2010)
Concentration Effect on the Oriented Microstructure in Tensile Drawn
Polyfluorene−Polyethylene Blend
(299305)
Macromolecules 43 #1 (2010)
Intercorrelation between Structural Ordering and Emission Properties in
Photoconducting Polymers
(306315)
Macromolecules 43 #1 (2010)
CO2 Transport in Polysulfone Membranes Containing Zeolitic Imidazolate
Frameworks As Determined by Permeation and PFG NMR Techniques
(316325)
Macromolecules 43 #1 (2010)
CO2-Philic Polymer Membrane with Extremely High Separation Performance
(326333)
Macromolecules 43 #1 (2010)
Novel Experimental Approach To Evaluate Filler−Elastomer Interactions
(334346)
Macromolecules 43 #1 (2010)
Anisotropy and Transport in Poly(arylene ether sulfone) Hydrophilic−Hydrophobic
Block Copolymers
(347353)
Macromolecules 43 #1 (2010)
In Situ Follow-Up of the Intercalation Process in a Clay/Polymer Nanocomposite
Model System by Rheo-XRD Analyses
(354361)
Macromolecules 43 #1 (2010)
A Study on the Epitaxial Ordering Process of the Polycaprolactone on the Highly
Oriented Polyethylene Substrate
(362366)
Macromolecules 43 #1 (2010)
Crystalline Syndiotactic Polystyrene as Reinforcing Agent of
cis-1,4-Polybutadiene Rubber
(367374)
Macromolecules 43 #1 (2010)
Crystallization of Poly(butylene terephthalate) from the Glass
(375383)
Macromolecules 43 #1 (2010)
Crystal Orientation Effect on Electric Energy Storage in Poly(vinylidene
fluoride-co-hexafluoropropylene) Copolymers
(384392)
Macromolecules 43 #1 (2010)
Crystallization of Defect-Free Polyethylene within Block Copolymer Mesophases
(393401)
Macromolecules 43 #1 (2010)
Correlation of Structure Changes in the Water-Induced Phase Transitions of
Poly(ethylenimine) Viewed from Molecular, Crystal, and Higher-Order Levels As
Studied by Simultaneous WAXD/SAXS/Raman Measurements
(402408)
Macromolecules 43 #1 (2010)
Relaxation Kinetics of Nanostructures on Polymer Surface: Effect of Stress,
Chain Mobility, and Spatial Confinement
(409417)
Macromolecules 43 #1 (2010)
Structural Rearrangements in a Lamellar Diblock Copolymer Thin Film during
Treatment with Saturated Solvent Vapor
(418427)
Macromolecules 43 #1 (2010)
Morphologies of Self-Organizing Regioregular Conjugated Polymer/Fullerene
Aggregates in Thin Film Solar Cells
(428432)
Macromolecules 43 #1 (2010)
Measuring the Structure of Epitaxially Assembled Block Copolymer Domains with
Soft X-ray Diffraction
(433441)
Macromolecules 43 #1 (2010)
Block Copolymer−Surfactant Complexes in Thin Films for Multiple Usages from
Hierarchical Structure to Nano-Objects
(442447)
Macromolecules 43 #1 (2010)
Interfacial Interactions in PP/MMT/SEBS Nanocomposites
(448453)
Macromolecules 43 #1 (2010)
Effect of Surface Molecular Aggregation State and Surface Molecular Motion on
Wetting Behavior of Water on Poly(fluoroalkyl methacrylate) Thin Films
(454460)
Macromolecules 43 #1 (2010)
Orientation of Block Copolymer Resists on Interlayer Dielectrics with Tunable
Surface Energy
(461466)
Macromolecules 43 #1 (2010)
Synthesis and Characterization of Amphiphilic Polyelectrolyte Brush Copolymers
Based on Poly(2,7-carbazole)
(467472)
Macromolecules 43 #1 (2010)
Construction of Continuous Porous Organogels, Hydrogels, and Bicontinuous
Organo/Hydro Hybrid Gels from Bicontinuous Microemulsions
(473479)
Macromolecules 43 #1 (2010)
Microcalorimetric Study of the Effects of a Chaotropic Salt, KSCN, on the Lower
Critical Solution Temperature (LCST) of Aqueous Poly(N-isopropylacrylamide)
(PNIPA) Solutions
(480487)
Macromolecules 43 #1 (2010)
Evaluation of Topological Defects in Tetra-PEG Gels
(488493)
Macromolecules 43 #1 (2010)
Structure and Properties of Dynamic Rigid Rod-Like Metallo-Supramolecular
Polyelectrolytes in Solution
(494500)
Macromolecules 43 #1 (2010)
Thermoresponsive Micelles of Phenanthrene-α-end-labeled
Poly(N-decylacrylamide-b-N,N-diethylacrylamide) in Water
(501510)
Macromolecules 43 #1 (2010)
Electromechanical Characterization of Polyelectrolyte Gels by Indentation
(511517)
Macromolecules 43 #1 (2010)
Molecular Observation of Branch Point Motion in Star Polymer Melts
(518524)
Macromolecules 43 #1 (2010)
Proposal to Solve the Time−Stress Discrepancy of Tube Models
(525531)
Macromolecules 43 #1 (2010)
Dimensional Description of Cyclic Macromolecules
(532537)
Macromolecules 43 #1 (2010)
Liquid- to Solid-Like Failure Mechanism of Thin Polymer Films at Micro- and
Nanoscales
(538542)
Macromolecules 43 #1 (2010)
Correlations between Morphologies and Photovoltaic Properties of Rod−Coil Block
Copolymers
(543552)
Macromolecules 43 #1 (2010)
First Principles Prediction of The Propagation Rate Coefficients of Acrylic and
Vinyl Esters: Are We There Yet?
(553560)
Macromolecules 43 #1 (2010)
Effect of Matrix Molecular Mass on the Crystallization of β-Form Isotactic
Polypropylene around an Oriented Polypropylene Fiber
(561564)
Macromolecules 43 #1 (2010)
Polymer Brushes Make Nanopore Filter Membranes Size Selective to Dissolved
Polymers
(565567)
Macromolecules 43 #1 (2010)
Synthesis of Thermo-Sensitive Nanocapsules via Inverse Miniemulsion
Polymerization Using a PEO−RAFT Agent
(568571)
Macromolecules 43 #1 (2010)
Probe-Based Nanolithography: Self-Amplified Depolymerization Media for Dry
Lithography
(572574)
Macromolecules 43 #1 (2010)
From Jellyfish Macromolecular Architectures to Nanodoughnut Self-Assembly
(575579)
Macromolecules 43 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
37.
Microporous
and Mesoporous Materials 129. #3 (2010)
(Titles and Abstracts) (R)
Incommensurate guest adsorption in
bellows-shaped one-dimensional channels of porous coordination polymers
(296-303)
Microporous
and Mesoporous Materials 129. #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
38.
Modern Plastics (2010)
(Titles and Abstracts)
Weekly
Trade
Magazine
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
39.
Nano
Letters 10 #1 (2010)
(Titles and Abstracts)
Smart Diblock Copolymers as Templates for Magnetic-Core Gold-Shell
Nanoparticle Synthesis
(8591)
Nano Letters 10 #1 (2010)
Maskless Nanoscale Writing of Nanoparticle−Polymer Composites and Nanoparticle
Assemblies using Thermal Nanoprobes
(129133)
Nano Letters 10 #1 (2010)
Tunable Antibacterial Coatings That Support Mammalian Cell Growth
(202207)
Nano Letters 10 #1 (2010)
Metal Nanodot Memory by Self-Assembled Block Copolymer Lift-Off
(224229)
Nano Letters 10 #1 (2010)
Oligo- and Polythiophene/ZnO Hybrid Nanowire Solar Cells
(334340)
Nano Letters 10 #1 (2010)
Periodic Array of Polyelectrolyte-Gated Organic Transistors from Electrospun
Poly(3-hexylthiophene) Nanofibers
(347351)
Nano Letters 10 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
40.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
41.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
42.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
43.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
44.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
45.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
46.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
47.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
48.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
49.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
50.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
51.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
52.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
53.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
54.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
55.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
56.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
57.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
58.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
59.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
60.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
61.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
62.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
63.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
64.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
65.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
66.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
67.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
68.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
67.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
70.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Roger D.
Corneliussen
Editor
Telephone: 610 883 0055
rcorneliussen@4spe.org
www.maropolymeronline.com
Copyright 2009 by Roger D. Corneliussen