Copyright 2010 by Roger D. Corneliussen
Below are links to the new articles by journals. A click should take you to the journal website. This is a great variation in where one ends up. In some cases, a click will take you to the issue in other cases a click will take you to the website and you must do a few more clicks to get to the issue. This is controlled by the publisher and not Maro. Fortunately, with a little practice, this should not be a serious problem. (RDC)
Polymer
Track (News)
Updated daily
Week 4 (1/25-1/29)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
01.
Additives for Polymers 2010 #1 (2010)
(Titles
only)
Trade Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
02.
Advanced Materials 22 #4 (2010)
(Titles and Abstracts)
Review
Multiple Functionalities of Polyelectrolyte Multilayer Films: New Biomedical
Applications
(p 441-467)
Advanced Materials 22 #4 (2010)
Abstract
Electrically Controllable Selective Reflection of
Chiral Nematic Liquid Crystal/Chiral Ionic Liquid Composites
(p 468-472)
Advanced Materials 22 #4 (2010)
Abstract
Aligned Carbon Nanotubes with Ferromagnetic
Behavior
(p 473-477)
Advanced Materials 22 #4 (2010)
Abstract
High-mobility Ambipolar Transistors and High-gain
Inverters from a Donor-Acceptor Copolymer Semiconductor
(p 478-482)
Advanced Materials 22 #4 (2010)
Abstract
Coaxial Electrospinning of Self-Healing Coatings
(p 496-499)
Advanced Materials 22 #4 (2010)
Abstract
A Promising Approach to Enhanced Thermoelectric
Properties Using Carbon Nanotube Networks
(p 535-539)
Advanced Materials 22 #4 (2010)
Abstract
Polymer-Controlled Crystallization of Unique
Mineral Superstructures
(p 540-545)
Advanced Materials 22 #4 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
03.
Advanced Powder Technology 21 #1
(2010)
(Titles and Abstracts)
The influence of nanoparticles on polystyrene
adhesion
(13-18)
Advanced Powder Technology 21 #1
(2010)
Hollow microspheres with binary colloidal and
polymeric membrane: Effect of polymer and particle concentrations
(19-22)
Advanced Powder Technology 21 #1
(2010)
Temperature-swing adsorption of proteins in
water using N-isopropylacrylamide
copolymer gel particles
(28-33)
Advanced Powder Technology 21 #1
(2010)
Preparation of silica fibers and non-woven
cloth by electrospinning
(64-68)
Advanced Powder Technology 21 #1
(2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
04.
Advanced Synthesis and Catalysis 352 #1 (2010)
(Titles and Abstracts)
Highly Enantioselective Epoxidation of Unfunctionalized Olefins Catalyzed by
Chiral Jacobsen
s
Catalyst Immobilized on Phenoxy-Modified Zirconium Poly(syrene-phenylvinylphos-
phonate)phosphate
(p 163-170)
Advanced Synthesis and Catalysis 352 #1 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
05.
Advances in Polymer Technology
28 #1 (2009)
(Titles and Abstracts)
Quantification of dynamic mixing performance of
single screws of different configurations by visualization and image analysis
(p 1-15)
Advances in Polymer Technology 28 #1 (2009)
Abstract
Rheology and thermal properties of polypropylene
modified by reactive extrusion with dicumyl peroxide and trimethylol propane
triacrylate
(p 16-25)
Advances in Polymer Technology 28 #1 (2009)
Abstract
An investigation into the swelling properties,
dimensional changes, and gel layer evolution in chitosan tablets undergoing
hydration
(p 32-39)
Advances in Polymer Technology 28 #1 (2009)
Abstract
Synthesis and characterization of uniform-sized
hollow chitosan microspheres
(p 40-47)
Advances in Polymer Technology 28 #1 (2009)
Abstract
***************************************************
Advances in Polymer Technology
28 #3 (2009)
(Titles and Abstracts)
Comparison of polyamide 66-organoclay binary and
ternary nanocomposites
(p 155-164)
Advances in Polymer Technology 28 #3 (2009)
Abstract
Structure and properties of cross-linked
polyurethane copolymers
(p 165-172)
Advances in Polymer Technology 28 #3 (2009)
Abstract
Morphology of poly(ethylene terephthalate)
blends: An analysis under real processing conditions by rheology and microscopy
(p 173-184)
Advances in Polymer Technology 28 #3 (2009)
Abstract
Effect of stereoregularity of polypropylene on
flow instability in capillary extrusion
(p 185-191)
Advances in Polymer Technology 28 #3 (2009)
Abstract
Improved compatibility of EVOH/LDPE blends by
-ray
irradiation
(p 192-198)
Advances in Polymer Technology 28 #3 (2009)
Abstract
Review
Oxycellulose: Significant characteristics in relation to its
pharmaceutical and medical applications
(p 199-208)
Advances in Polymer Technology 28 #3 (2009)
Abstract
**************************************************
Advances in Polymer Technology
28 #4 (2009)
(Titles and Abstracts)
A fluorescence study on swelling of hydrogels (PAAm)
at various cross-linker contents
(p 215-223)
Advances in Polymer Technology 28 #4 (2009)
Abstract
Optimization of physico-mechanical properties of
silica-filled NR/SBR compounds
(p 224-232)
Advances in Polymer Technology 28 #4 (2009)
Abstract
Chemical modification of polypropylene with
diisocyanates for improved gas barrier and mechanical properties
(p 233-245)
Advances in Polymer Technology 28 #4 (2009)
Abstract
A novel process for continuous thermal embossing
of large-area nanopatterns onto polymer films
(p 246-256)
Advances in Polymer Technology 28 #4 (2009)
Abstract
Electrical and thermal properties of nylon
6/calcium carbonate composites
(p 257-266)
Advances in Polymer Technology 28 #4 (2009)
Abstract
Method to describe curing in large epoxy samples
(p 267-275)
Advances in Polymer Technology 28 #4 (2009)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
06.
Aerosol Science & Technology
44 #3 (2010)
(Titles
and Abstracts)
Comparison of Polycarbonate and Polytetrafluoroethylene Filters for Sampling of
Airborne Bacteriophages
(203 – 207)
Aerosol Science & Technology
44 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
07.
Angewandte Chemie International Edition 49 #6 (2010)
(Titles and Abstracts)
Metal Coordination Mediated Reversible Conversion
between Linear and Cross-Linked Supramolecular Polymers
(p 1090-1094)
Angewandte Chemie International Edition 49 #6 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
08.
Applied Physics
Letters 96 #3 (2010)
Titles and Abstracts
Interchain and intrachain emission branching in polymer light-emitting diode
doped by organic molecules
(# 033301)
Applied Physics
Letters 96 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
09.
Archive of Applied
Mechanics 80
#3 (2010)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
10.
Biomaterials 31 #8 (2010)
(Titles
and Abstracts)
Physical surface and electromechanical
properties of doped polypyrrole biomaterials
(1974-1983)
Biomaterials 31 #8 (2010)
Induction of DNA double-strand breaks in
primary gingival fibroblasts by exposure to dental resin composites
(2010-2014)
Biomaterials 31 #8 (2010)
The influence of structural design of PLGA/collagen
hybrid scaffolds in cartilage tissue engineering
(2141-2152)
Biomaterials 31 #8 (2010)
The use of surface modified
poly(glycerol-co-sebacic acid) in retinal transplantation
(2153-2162)
Biomaterials 31 #8 (2010)
The cavity-to-cavity migration of leukaemic
cells through 3D honey-combed hydrogels with adjustable internal dimension and
stiffness
(2201-2208)
Biomaterials 31 #8 (2010)
Anti-HIF-1α antibody-conjugated pluronic
triblock copolymers encapsulated with Paclitaxel for tumor targeting therapy
(2302-2312)
Biomaterials 31 #8 (2010)
Trophically and topographically functionalized
silk fibroin nerve conduits for guided peripheral nerve regeneration
(2323-2334)
Biomaterials 31 #8 (2010)
Self-assembling methoxypoly(ethylene glycol)-b-poly(carbonate-co-
(2358-2370)
Biomaterials 31 #8 (2010)
The effects of mixed MPEG–PLA/Pluronic®
copolymer micelles on the bioavailability and multidrug resistance of docetaxel
(2371-2379)
Biomaterials 31 #8 (2010)
Cell-penetrating macromolecules: Direct
penetration of amphipathic phospholipid polymers across plasma membrane of
living cells
(2380-2387)
Biomaterials 31 #8 (2010)
Co-delivery of siRNA and paclitaxel into cancer
cells by biodegradable cationic micelles based on PDMAEMA–PCL–PDMAEMA triblock
copolymers
(2408-2416)
Biomaterials 31 #8 (2010)
*************************************************
Biomaterials 31 #9 (2010)
(Titles
and Abstracts)
A biodegradable, injectable, gel system based
on MPEG-b-(PCL-ran-PLLA)
diblock copolymers with an adjustable therapeutic window
(2453-2460)
Biomaterials 31 #9 (2010)
The linker-free covalent attachment of collagen
to plasma immersion ion implantation treated polytetrafluoroethylene and
subsequent cell-binding activity
(2526-2534)
Biomaterials 31 #9 (2010)
The effects of TGF-α, IL-1β and PDGF on
fibroblast adhesion to ECM-derived matrix and KGF gene expression
(2542-2548)
Biomaterials 31 #9 (2010)
Long term performance of small-diameter
vascular grafts made of a poly(ether)urethane–polydimethylsiloxane
semi-interpenetrating polymeric network
(2592-2605)
Biomaterials 31 #9 (2010)
Synthesis of a family of amphiphilic
glycopolymers via controlled
ring-opening polymerization of functionalized cyclic carbonates and their
application in drug delivery
(2637-2645)
Biomaterials 31 #9 (2010)
The use of carboxymethylcellulose gel to
increase non-viral gene transfer in mouse airways
(2665-2672)
Biomaterials 31 #9 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
11. Building
and Environment 45 #5 (2010)
(Titles and Abstracts)
Multifunctional bioinspired sol-gel coatings
for architectural glasses
(1233-1243) Building
and Environment 45 #5 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
12.
Chemical Communications #5 (2010)
(Titles, Abstracts and Articles)
Copper-free cycloaddition of azide and alkyne in crystalline state facilitated
by arene–perfluoroarene interactions
(782 - 784)
Chemical Communications #5 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
13.
Chemical Engineering Communications 197 #6 (2010)
(Titles
and Abstracts) (T)
UNSTEADY FLOW DUE TO NON-COAXIAL ROTATION OF A POROUS DISK AND A FLUID AT
INFINITY THROUGH POROUS MEDIUM
(791 – 803)
Chemical Engineering Communications 197 #6 (2010)
CARBONATION OF BARIUM SULFIDE IN A FOAM-BED REACTOR
(804 – 829)
Chemical Engineering Communications 197 #6 (2010)
EFFECTS OF HALL CURRENT ON MHD FLOW IN A ROTATING CHANNEL PARTIALLY FILLED WITH
A POROUS MEDIUM
(830 – 845)
Chemical Engineering Communications 197 #6 (2010)
SIMILARITY SOLUTION FOR UNSTEADY HEAT AND MASS TRANSFER FROM A STRETCHING
SURFACE EMBEDDED IN A POROUS MEDIUM WITH SUCTION/INJECTION AND CHEMICAL REACTION
EFFECTS
(846 – 858)
Chemical Engineering Communications 197 #6 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
14.
Chemical Physics Letters 486 #1-3 (2010)
(Titles and Abstracts)
Specific interactions in partially miscible
polycarbonate (PC)/poly (methyl methacrylate) (PMMA) blends
(32-36)
Chemical Physics Letters 486 #1-3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
15.
Chemical
Week
Titles and Abstracts) Weekly (H)
Trade
Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
16.
Colloids and Surfaces A: Physicochemical and Engineering Aspects 355 #1-3 (2010)
(Titles and Abstracts)
Conformations of poly(allylamine hydrochloride)
in electrolyte solutions: Experimental measurements and theoretical modeling
(7-15 )
Colloids and Surfaces A: Physicochemical and Engineering Aspects 355 #1-3 (2010)
Obtaining of monodisperse particles through
soap-free polymerization in the presence of C60
(23-28)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 355 #1-3 (2010)
Poly(vinyl alcohol-co-vinyl acetate) complex
formation with anionic surfactants particle size of nanogels and their
disaggregation with sodium dodecyl sulfate
(29-36)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 355 #1-3 (2010)
A simple and efficient route to prepare
inorganic hollow microspheres using polymer particles as template in
supercritical fluids
(45-52)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 355 #1-3 (2010)
Synergistic effect of copolymer and
poly(vinylpyrrolidone) mixtures on rheology of aqueous SiC suspensions
(104-108)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 355 #1-3 (2010)
Foams stabilized by Laponite nanoparticles and
alkylammonium bromides with different alkyl chain lengths
(151-157)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 355 #1-3 (2010)
Crystallization and morphological control of
calcium carbonate by functionalized triblock copolymers
(158-162)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 355 #1-3 (2010)
Study on the superhydrophobic poly(methyl
methacrylate)/silver thiolate composite coating with absorption of UVA light
(163-166)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 355 #1-3 (2010)
Preparation and antibacterial activity of
silver-doped organic–inorganic hybrid coatings on glass substrates
(167-171)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 355 #1-3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
17.
Composites Part A: Applied Science and Manufacturing 41 #3 (2010)
(Titles and Abstracts)
Comparative post fatigue residual property
predictions of reinforced and unreinforced poly(ethylene terephthalate) fibers
using artificial neural networks
(331-344)
Composites Part A: Applied Science and Manufacturing 41 #3 (2010)
A study of the mechanical behaviour on fibre
reinforced hollow microspheres hybrid composites
(345-352)
Composites Part A: Applied Science and Manufacturing 41 #3 (2010)
Failure mechanisms in composites reinforced
with unidirectional Phormium leaf fibre
(353-359)
Composites Part A: Applied Science and Manufacturing 41 #3 (2010)
Autonomic healing of low-velocity impact damage
in fiber-reinforced composites
(360-368)
Composites Part A: Applied Science and Manufacturing 41 #3 (2010)
Experimental investigation of a novel hybrid
metal–composite joining technology
(369-374)
Composites Part A: Applied Science and Manufacturing 41 #3 (2010)
Synthesis of nanocomposite films from wheat
gluten matrix and MMT intercalated with different quaternary ammonium salts by
way of hydroalcoholic solvent casting
(375-382)
Composites Part A: Applied Science and Manufacturing 41 #3 (2010)
A probabilistic approach for transverse crack
evolution in a composite laminate under variable amplitude cyclic loading
(383-390)
Composites Part A: Applied Science and Manufacturing 41 #3 (2010)
Machinability analysis in drilling woven GFR/epoxy
composites: Part I – Effect of machining parameters
(391-400)
Composites Part A: Applied Science and Manufacturing 41 #3 (2010)
Development of the properties of a carbon fibre
reinforced thermosetting composite through cure
(401-409)
Composites Part A: Applied Science and Manufacturing 41 #3 (2010)
Modelling of the spring-in phenomenon in curved
parts made of a thermosetting composite
(410-418)
Composites Part A: Applied Science and Manufacturing 41 #3 (2010)
Correlation between dispersion state and
electrical conductivity of MWCNTs/PP composites prepared by melt blending
(419-426)
Composites Part A: Applied Science and Manufacturing 41 #3 (2010)
Compressive characteristics of foam-filled
composite egg-box sandwich panels as energy absorbing structures
(427-434)
Composites Part A: Applied Science and Manufacturing 41 #3 (2010)
New polypropylene/glass composites: Effect of
glass fibers from cathode ray tubes on thermal and mechanical properties
(435-440)
Composites Part A: Applied Science and Manufacturing 41 #3 (2010)
The effect of different passive fire protection
systems on the fire reaction properties of GFRP pultruded profiles for civil
construction
(441-452)
Composites Part A: Applied Science and Manufacturing 41 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
18.
Construction
and Building Materials
24 #4 (2010)
(Titles and Abstracts)
Improvement of the mechanical properties of
glass fibre reinforced plastic waste powder filled concrete
(448-460)
Construction
and Building Materials
24 #4 (2010)
Analysis and application of relationships
between low-temperature rheological performance parameters of asphalt binders
(471-478)
Construction
and Building Materials
24 #4 (2010)
A predictive equation for dynamic modulus of
asphalt mixtures used in Korea
(513-519)
Construction
and Building Materials
24 #4 (2010)
Experimental and numerical evaluation of
composite repairs on wood beams damaged by cross-graining
(531-537)
Construction
and Building Materials
24 #4 (2010)
Material-specific effects of hydrated lime on
the properties and performance behavior of asphalt mixtures and asphaltic
pavements
(538-544)
Construction
and Building Materials
24 #4 (2010)
Performance of alternative CFRP retrofitting
schemes used in infilled RC frames
(596-609)
Construction
and Building Materials
24 #4 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
19.
Dalton Transactions #5 (2010)
(Titles
and Abstracts)
Manisyl-substituted polypyridine coordination compounds: Metallo-supramolecular
networks of interdigitated double helices assembled via CH
and –
interactions
(1519 - 1531)
Dalton Transactions #5 (2010)
Efficient electrogenerated chemiluminescence from osmium(II)
polypyridine systems containing tetraphenylarsine or diphenylphosphine ligands
(1586 - 1590)
Dalton Transactions #5 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
20.
Dyes and Pigments 86 #1 (2010)
(Titles and Abstracts)
Investigation on the correlation between the
structure of azulen-1-yl-benzothiazol-2-yl diazenes and their properties.
Acidity and electrochemical redox potentials
(1-5)
Dyes and Pigments 86 #1 (2010)
The synthesis and optical characterization of
novel iminocoumarin derivatives
(6-14)
Dyes and Pigments 86 #1 (2010)
Protolytic fluorescein species evaluated using
chemometry and DFT studies
(15-24)
Dyes and Pigments 86 #1 (2010)
The synthesis, characterization and optical
properties of novel, substituted, pyrazoly 1,3,4-oxadiazole derivatives
(25-31)
Dyes and Pigments 86 #1 (2010)
Fluorescent macromolecular perylene diimides
containing pyrene or indole units in bay positions
(32-41)
Dyes and Pigments 86 #1 (2010)
A rhodamine-based dual chemosensor for the
visual detection of copper and the ratiometric fluorescent detection of vanadium
(50-55)
Dyes and Pigments 86 #1 (2010)
Photoinactivation of
Escherichia coli on acrylic paint
formulations using fluorescent light
(56-62)
Dyes and Pigments 86 #1 (2010)
TPA-active D–π–D fluorophores with rigid,
planar cores from phenylene to indenofluorene and indolocarbazole
(63-67)
Dyes and Pigments 86 #1 (2010)
The synthesis and fluorescence behaviour of
phthalocyanines unsymmetrically substituted with naphthol and carboxy groups
(68-73)
Dyes and Pigments 86 #1 (2010)
The synthesis and spectroscopic properties of
novel, photochromic indolinobenzospiropyran-based homopolymers prepared via
ring-opening metathesis polymerization
(74-80)
Dyes and Pigments 86 #1 (2010)
The synthesis, light-harvesting, and
photocatalysis of naphthylporphyrin-functionalized platinum nanocomposites
(81-86)
Dyes and Pigments 86 #1 (2010)
The determination of thiols based using a probe
that utilizes both an absorption red-shift and fluorescence enhancement
(87-92)
Dyes and Pigments 86 #1 (2010)
Silica chloride catalyzed synthesis of
14-aryl-14H-dibenzo[a,i]xanthene-8,13-diones
(93-96)
Dyes and Pigments 86 #1 (2010)
The synthesis, spectroscopic characterization
and structure of three bis(arylmethylidene)cyclopentanones
(97-105)
Dyes and Pigments 86 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
21.
Energy
& Fuels 24 #1 (2010)
(Titles
and Abstracts)
Approaches and Software Tools for Modeling Lignin Pyrolysis
(58–67)
Energy & Fuels 24 #1 (2010)
Catalytic and Noncatalytic Mechanisms in Steam Gasification of Char from the
Pyrolysis of Biomass
(108–116)
Energy & Fuels 24 #1 (2010)
Recycling Plastics as a Resource for Electric Arc Furnace (EAF) Steelmaking:
Combustion and Structural Transformations of Metallurgical Coke and Plastic
Blends
(379–391)
Energy & Fuels 24 #1 (2010)
Tracking Changes in Thermal Oil Maturity and Organofacies Heterogeneities Using
Alkylthiophene Distributions in Asphaltene Pyrolysates
(550–556)
Energy & Fuels 24 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
22.
Engineering Fracture Mechanics 77 #3 (2010)
(Titles and Abstracts)
The effect of mode ratio and bond interface on
the fatigue behavior of a highly-toughened epoxy
(395-414)
Engineering Fracture Mechanics 77 #3 (2010)
Fracture R-curve
characterization of toughened epoxy adhesives
(521-534)
Engineering Fracture Mechanics 77 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
23.
Fire
and Materials 34 #1 (2010)
(Titles and Abstracts) S
The use of fire-retardant intumescent mats for
fire and heat protection of glass fibre-reinforced polyester composites: Thermal
barrier properties
(p 21-38)
Fire and Materials 34 #1 (2010)
Abstract
Application of a simple enthalpy-based pyrolysis
model in numerical simulations of pyrolysis of charring materials
(p 39-54)
Fire and Materials 34 #1 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
24.
Industrial &
Engineering Chemistry Research 49 #3 (2010)
(Titles and Abstracts) (T)
Effect of Temperature in Fluidized Bed Fast Pyrolysis of Biomass: Oil Quality
Assessment in Test Units
(1160–1168)
Review
Encapsulation Using Hyperbranched Polymers: From Research and Technologies to
Emerging Applications
(1169–1196)
Industrial & Engineering Chemistry Research 49 #3 (2010)
Flocculation Properties and Antimicrobial Activities of Quaternized Celluloses
Synthesized in NaOH/Urea Aqueous Solution
(1242–1246)
Industrial & Engineering Chemistry Research 49 #3 (2010)
Effect of Ball Milling on Electrochemical Properties of PVdF-HFP Porous
Membranes Applied for DMFCs
(1281–1288)
Industrial & Engineering Chemistry Research 49 #3 (2010)
Predicting the Phase Behavior of Polymer Systems with the GC-SAFT-VR Approach
(1378–1394)
Industrial & Engineering Chemistry Research 49 #3 (2010)
Manufacture of High-Performance Rice-Straw Fiberboards
(1428–1435)
Industrial & Engineering Chemistry Research 49 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
25.
Journal of Applied Polymer Science 116 #3 (2010)
(Titles and Abstracts) (H)
A stacked neural network approach for yield
prediction of propylene polymerization
(p 1237-1246)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract |
References | Full Text:
HTML,
PDF (Size: 443K)
Save
Article
Performance of fibers embedded in a cementitious
matrix
(p 1247-1253)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Effects of crosslinking modification on the O2/N2
separation characteristics of poly(phenyl sulfone)/poly(bisphenol A-co-4-nitrophthalic
anhydride-co-1,3-phenylenediamine) blend membranes
(p 1254-1263)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Numerical simulation of bubble growth in a
limited amount of liquid
(p 1264-1271)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Covalent functionalization of multiwalled carbon
nanotubes with polybutadiene
(p 1272-1277)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Effect of polymerically-modified clay structure
on morphology and properties of UV-cured EA/clay nanocomposites
(p 1278-1283)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
The surface modification of medical polyurethane
to improve the hydrophilicity and lubricity: The effect of pretreatment
(p 1284-1290)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Factorial experimental design on synthesis of
functional core/shell polymeric nanoparticles via differential microemulsion
polymerization
(p 1291-1298)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Preparation and properties of polyurethane/benzyl
amylose semi-interpenetrating networks
(p 1299-1305)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Preparation and characterization of
metal-chelated poly(HEMA-MAH) monolithic cryogels and their use for DNA
adsorption
(p 1306-1312)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Sea-island polyurethane/polycarbonate composite
nanofiber fabricated through electrospinning
(p 1313-1321)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Influence of carbon nanotubes with different
functional groups on the morphology and properties of PPO/PA6 blends
(p 1322-1328)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Application of thermosetting organic solvent free
polymer gel electrolyte in quasi-solid-state dye-sensitized solar cell
(p 1329-1333)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Effect of crystallinity on enthalpy recovery
peaks and cold-crystallization peaks in PET via TMDSC and DMA studies
(p 1334-1341)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Preparation, characterization, and drug-release
properties of pH/temperature-responsive poly(N-isopropylacrylamide)/chitosan
semi-IPN hydrogel particles
(p 1342-1347)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Equilibrium swelling of polystyrene by alkanes
and carboxylic acids: A simple quantitative correlation model
(p 1348-1356)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Relationship between structure and rheological,
mechanical and thermal properties of polylactide/Cloisite 30B nanocomposites
(p 1357-1365)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Electroanalytical studies on electrically
conducting polyaniline:polyethyleneterephthalate composite films
(p 1366-1375)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
A multifunctional hydrogel with
high-conductivity, pH-responsive, and release properties from
polyacrylate/polyptrrole
(p 1376-1383)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Investigation on the melt spinning fibers of
PP/organoclay nanocomposites prepared by in-situ polymerization
(p 1384-1391)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Novel
2,4-divinyl-3-alkylthiophene/1,3,4-oxadiazole alternating conjugated copolymer
synthesized by the Heck coupling method: Synthesis, characterization, and
electronic and optical properties
(p 1392-1399)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Synthetic resin. XII. Synthesis and
characterization of new terpolymer resins derived from 8-hydroxyquinoline
5-sulfonic acid, melamine, and formaldehyde
(p 1400-1407)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Crystallization kinetics of cis-1,4-polybutadiene
(p 1408-1413)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Preparation of adsorbent for palladium ions by
amination of acrylonitrile grafted polypropylene nonwoven fabrics
(p 1414-1421)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Synthesis and characterization of hetarylazo
disperse colorants: Preparation and properties of conventional and
microemulsified inks for polyester ink-jet printing
(p 1422-1427)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Effect of different nanoparticles on thermal,
mechanical and dynamic mechanical properties of hydrogenated nitrile butadiene
rubber nanocomposites
(p 1428-1441)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Characterization of microfibrillar reinforced
poly(ethylene naphthalate)/polypropylene composites via polarized Raman and
polarized FTIR spectroscopy
(p 1442-1449)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Synthesis and properties of novel
poly(coumarin-amide)s
(p 1450-1458)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Rheological behaviors of PVA/H2O
solutions of high-polymer concentration
(p 1459-1466)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Effect of metallic flask closure and investment
materials on the stability of the denture base resin
(p 1467-1474)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
The stabilization of bisphenol-A based
polycarbonate by phosphine oxide
(p 1475-1482)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Study on the interfacial properties of
three-dimensionally arranged glass fiber/epoxy resin model composites
(p 1483-1490)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Sulfonated poly(ether sulfone)/silica composite
membranes for direct methanol fuel cells
(p 1491-1498)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Characterization of molecularly imprinted and
nonimprinted polymer submicron particles specifically tailored for removal of
trace 17
-estradiol
in water treatment
(p 1499-1508)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Adsorption of nile red by poly(N-isopropylacrylamide)
gels in binary water/tetrahydrofuran mixtures
(p 1509-1514)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Synthesis and characterization of a new type of
sulfonated poly(ether ether ketone ketone)s for proton exchange membranes
(p 1515-1523)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Synthesis and characterization of polypyrrole
composites for corrosion protection of steel
(p 1524-1537)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
DC electrical conductivity of
polyazomethinethiosemicarbazone metal complexes
(p 1538-1544)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Surface modification of textiles by glow
discharge technique: Part II: Low frequency plasma treatment of wool fabrics
with acrylic acid
(p 1545-1551)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Application of confocal laser scanning microscope
technique to visualize dynamic sorption behavior of perylene in cellulose
acetate film
(p 1552-1557)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Modification of low-density polyethylene by graft
copolymerization with maleic anhydride and blends with polyamide 6 (p 1558-1565)
Abstract
Effects of solvent sort, PES and PVP
concentration on the properties and morphology of PVDF/PES blend hollow fiber
membranes
(p 1566-1573)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Synthesis of well-defined comblike
hydroxy-functionalized atactic polystyrene promoted by
metallocene/tin/poly(phenyl glycidyl ether)-co-formaldehyde
(p 1574-1580)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
High-strength and high-toughness polyimide
nanofibers: Synthesis and characterization
(p 1581-1586)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Electrical and optical properties of polyaniline
with a weblike morphology
(p 1587-1592)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Weibull statistics in electrical aging of
polyesterimide under AC voltage
(p 1593-1596)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Optimization of the reaction conditions and
characterization of L-lactic acid direct
polycondensation products catalyzed by a non-metal-based compound
(p 1597-1602)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Benzotrifluoromethyl group-substituted
poly(para-phenylenevinylene): Effect on solubility, optical, and electronic
properties
(p 1603-1610)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Synthesis of lactose-containing
glycopolymer-grafted silica gel particles
(p 1611-1616)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Influence of steaming pressure on steam explosion
pretreatment of Lespedeza stalks (Lespedeza cyrtobotrya). II.
Characteristics of degraded lignin
(p 1617-1625)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Fabrication and properties of solution-cast
polyaniline/carboxymethylchitin blend films
(p 1626-1634)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
The molecular arrangement of Bifenthrin® in ether
based polyurethane: Designing a synthetic termite barrier
(p 1635-1639)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Synthesis and characterization of quaternary
ammonium PEGDA dendritic copolymer networks for water disinfection
(p 1640-1649)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Synthesis and properties of novel aromatic
polyamides with xanthene cardo groups
(p 1650-1659)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Effect of treatment of Bis(3-triethoxysilyl
propyl)tetrasulfane on physical property of in situ sodium activated and
organomodified bentonite clay - SBR rubber nanocomposite
(p 1660-1670)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Poly(vinyl alcohol) and layered double hydroxide
composites: Thermal and mechanical properties
(p 1671-1677)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Rubber-like thermosetting epoxy asphalt
composites exhibiting atypical yielding behaviors
(p 1678-1685)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Preparation and properties of sulfopropyl
chitosan derivatives with various sulfonation degree
(p 1686-1693)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Preparation of semirigid polyurethane foam with
liquefied bamboo residues
(p 1694-1699)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Surface modification of nylon membrane by
glycidyl methacrylate graft copolymerization for antibody immobilization
(p 1700-1709)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Comparative study of additives on visualized
dynamic sorption behavior of perylene in cellulose acetate film by confocal
laser scanning microscope technique
(p 1710-1717)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Electrolyte-based antistatic plasticizer for soft
poly(vinyl chloride) composites
(p 1718-1724)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Novel biodegradable form stable phase change
materials: Blends of poly(ethylene oxide) and gelatinized potato starch
(p 1725-1731)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Glutaraldehyde-crosslinked poly(vinyl alcohol)
hydrogel discs for the controlled release of antidiabetic drug
(p 1732-1738)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Structure and properties of high melt strength
polypropylene prepared by combined method of blending and crosslinking
(p 1739-1746)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Droplet size and morphology for the aqueous
two-phase polymerization of acrylamide in an aqueous poly(ethylene glycol)
solution
(p 1747-1758)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Biobased composites prepared by compression
molding with a novel thermoset resin from soybean oil and a natural-fiber
reinforcement
(p 1759-1765)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Investigation of thermally conducting
phase-change materials based on polyethylene/wax blends filled with copper
particles
(p 1766-1774)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Renewable elastomers based on blends of maleated
polypropylene and plasticized starch
(p 1775-1781)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Preparation and properties of carbon fiber/
hydroxyapatite-poly(methyl methacrylate) biocomposites
(p 1782-1787)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Characterization and thermal stability of
cellulose-graft-polyacryloniytrile prepared by using KMnO4/citric
acid redox system
(p 1788-1795)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Shrinkage in extruded moisture crosslinked silane-grafted
polyethylene wire insulation
(p 1796-1802)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Diffusion coefficients of polychlorinated
biphenyls and polycyclic aromatic hydrocarbons in polydimethylsiloxane and
low-density polyethylene polymers
(p 1803-1810)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Statistical thermal stability of PVC
(p 1811-1822)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Relating microhardness to injection molding
induced morphology: A study of microbeam synchrotron WAXD
(p 1823-1831)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Novel thermo-responsive semi-interpenetrating
network microspheres of gellan gum-poly(N-isopropylacrylamide) for
controlled release of atenolol
(p 1832-1841)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
Modeling of diffusion-controlled reactions in
free radical solution and bulk polymerization: Model validation by DSC
experiments
(p 1842-1856)
Journal of Applied Polymer Science 116 #3 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
26.
Journal
of Fire Sciences
28 #1 (2010)
(Titles and Abstracts) S
A New Type of BTP/Zeolites Nanocomposites as
Mixed-phase Fire Suppressant: Preparation, Characterization, and Extinguishing
Mechanism Discussion
(5-25) Journal
of Fire Sciences 28 #1 (2010)
[Abstract]
An Experimental Study on the Effect of Slope on the
Critical Velocity in Tunnel Fires
( 27-47) Journal
of Fire Sciences 28 #1 (2010)
Flammability Studies of a Novel Class of Thermoplastic
Elastomer Nanocomposites
(49-85) Journal
of Fire Sciences 28 #1 (2010)
[Abstract]
Halogen-free Flame Retardants that Outperform
Halogenated Counterparts in Glass Fiber Reinforced Polyamides
(87-100) Journal
of Fire Sciences 28 #1 (2010)
[Abstract]
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
27.
Journal of
Fluorine Chemistry 131, #2 (2010)
Titles and Abstracts (E)
Asymmetric synthesis of fluorine-containing
amines, amino alcohols, α- and β-amino acids mediated by chiral sulfinyl group
(127-139)
Journal of
Fluorine Chemistry 131, #2 (2010)
New trends in the chemistry of α-fluorinated
ethers, thioethers, amines and phosphines
(140-158)
Journal of
Fluorine Chemistry 131, #2 (2010)
Fluorides of some s-, p-, d-, and f-metals as
prospective materials for interference optics: Present status and development
(159-164)
Journal of
Fluorine Chemistry 131, #2 (2010)
Synthesis of the first representative of
dicarbothiacyanine dyes with completely fluorinated polymethine chain
(165-171)
Journal of
Fluorine Chemistry 131, #2 (2010)
Asymmetric induction in thia-Diels-Alder
reactions of chiral polyfluoroalkylthionocarboxylates
(172-183)
Journal of
Fluorine Chemistry 131, #2 (2010)
On the reactions of trifluorovinylsilanes with
aromatic ketones – Expected and some unexpected results
(184-189)
Journal of
Fluorine Chemistry 131, #2 (2010)
Reaction of enamines with trifluoromethyl
containing carbonyl reagents
(190-199)
Journal of
Fluorine Chemistry 131, #2 (2010)
A deeper insight into direct
trifluoromethoxylation with trifluoromethyl triflate
(200-207)
Journal of
Fluorine Chemistry 131, #2 (2010)
Activation of free-radical polyfluoroalkylation
of organic substrates with freon BrCF2CF2Br using a system
of organic base-electron transfer mediator
(208-211)
Journal of
Fluorine Chemistry 131, #2 (2010)
The solid complex Zn(CF3)Br·2DMF as
an alternative reagent for the preparation of both, trifluoromethyl and
pentafluoroethyl copper, CuCF3 and CuC2F5
(212-216)
Journal of
Fluorine Chemistry 131, #2 (2010)
An optimized protocol for the multigram
synthesis of 3-(trifluoromethyl)bicyclo[1.1.1]pent-1-ylglycine (CF3-Bpg)
(217-220)
Journal of
Fluorine Chemistry 131, #2 (2010)
1-Amino-3,3-difluorocyclobutanecarboxylic acid
(221-223)
Journal of
Fluorine Chemistry 131, #2 (2010)
Synthesis of new β-trifluoromethyl containing
GABA and β-fluoromethyl containing N-benzylpyrrolidinones
(224-228)
Journal of
Fluorine Chemistry 131, #2 (2010)
Convenient synthesis of trifluoromethylated
2-pyrrolidone and 2-pyrrolone derivatives
(234-237)
Journal of
Fluorine Chemistry 131, #2 (2010)
The aza Arndt–Eistert reaction based on
N-trifluoromethylsulfonylarenecarboximidoyl
chlorides
(238-247)
Journal of
Fluorine Chemistry 131, #2 (2010)
Reactions of 1,3,5-tris(fluorosulfonyl)benzene
with some nucleophilic reagents
(248-253)
Journal of
Fluorine Chemistry 131, #2 (2010)
Halogen migration vs. hydrogen halogenide
elimination in reactions of 1-chloro-2,2,2-trifluoroethansulfonyl chloride and
1,2,2,2-tetrafluoroethansulfonyl fluoride with amines: theoretical and
experimental investigation
(254-260)
Journal of
Fluorine Chemistry 131, #2 (2010)
Biomimetic reductive amination under the
continuous-flow reaction conditions
(261-265)
Journal of
Fluorine Chemistry 131, #2 (2010)
Self-disproportionation of enantiomers of
3,3,3-trifluorolactic acid amides via sublimation
(266-269)
Journal of
Fluorine Chemistry 131, #2 (2010)
The reactions of
3,7-dimethylenebicyclo[3.3.1]nonane, norbornadiene and
cis,cis-1,5-cyclooctadiene
with pentafluoro-λ6-sulfanyl chloride
(270-273)
Journal of
Fluorine Chemistry 131, #2 (2010)
BTISA-catalyzed Friedel–Crafts bimolecular
cyclization of cinnamic acid under superelectrophilic solvation conditions
(274-277)
Journal of
Fluorine Chemistry 131, #2 (2010)
Phase transformations in LnF3–(Ln,
Zr)–ZrF4 systems, where Ln = Sm, Eu, Tm, Yb
(282-287)
Journal of
Fluorine Chemistry 131, #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
28.
Journal of Polymer Science Part A: Polymer Chemistry 48 #5 (2010)
(Titles and Abstracts) (H)
Polymer-based fluorescence sensors incorporating
chiral binaphthyl and benzo[2,1,3]thiadiazole moieties for Hg2+
detection
(p 997-1006)
Journal of Polymer Science Part A: Polymer Chemistry 48 #5 (2010)
Abstract
Proline-based polymeric monoliths: Synthesis,
characterization, and applications as organocatalysts in aldol reaction
(p 1007-1015)
Journal of Polymer Science Part A: Polymer Chemistry 48 #5 (2010)
Abstract
Interactions of carbon nanotubes with
pyrene-functionalized linear-dendritic hybrid polymers
(p 1016-1028)
Journal of Polymer Science Part A: Polymer Chemistry 48 #5 (2010)
Abstract
Kinetics of the radical copolymerization of
2,2,2-trifluoroethyl methacrylate with tert-butyl 
-trifluoromethacrylate
(p 1029-1037)
Journal of Polymer Science Part A: Polymer Chemistry 48 #5 (2010)
Abstract
The effect of different catalytic chain transfer
agents on particle nucleation and the course of the polymerization in ab
initio batch emulsion polymerization of methyl methacrylate
(p 1038-1048)
Journal of Polymer Science Part A: Polymer Chemistry 48 #5 (2010)
Abstract
Synthesis of well-defined rod-coil block
copolymers containing trifluoromethylated poly(phenylene oxide)s by chain-growth
condensation polymerization and atom transfer radical polymerization
(p 1049-1057)
Journal of Polymer Science Part A: Polymer Chemistry 48 #5 (2010)
Abstract
Chromatographic performance of molecularly
imprinted polymers: Core-shell microspheres by precipitation polymerization and
grafted MIP films via iniferter-modified silica beads
(p 1058-1066)
Journal of Polymer Science Part A: Polymer Chemistry 48 #5 (2010)
Abstract
Multifunctional poly(2,5-benzimidazole)/carbon
nanotube composite films
(p 1067-1078)
Journal of Polymer Science Part A: Polymer Chemistry 48 #5 (2010)
Abstract
Biocompatible and pH-responsive triblock
copolymer mPEG-b-PCL-b-PDMAEMA: Synthesis, self-assembly, and
application
(p 1079-1091)
Journal of Polymer Science Part A: Polymer Chemistry 48 #5 (2010)
Abstract
Titanium-mediated [CpTiCl2(OEt)]
ring-opening polymerization of lactides: A novel route to well-defined
polylactide-based complex macromolecular architectures
(p 1092-1103)
Journal of Polymer Science Part A: Polymer Chemistry 48 #5 (2010)
Abstract
Novel diblock copolymer-grafted multiwalled
carbon nanotubes via a combination of living and controlled/living surface
polymerizations
(p 1104-1112)
Journal of Polymer Science Part A: Polymer Chemistry 48 #5 (2010)
Abstract
Bis(-ketoamino)copper(II)/methylaluminoxane
systems for homo- and copolymerizations of methyl acrylate and 1-hexene
(p 1113-1121)
Journal of Polymer Science Part A: Polymer Chemistry 48 #5 (2010)
Abstract
Vanadium(V) complexes containing tetradentate
amine trihydroxy ligands as catalysts for copolymerization of cyclic olefins
(p 1122-1132)
Journal of Polymer Science Part A: Polymer Chemistry 48 #5 (2010)
Abstract
Epoxy-based networks combining chemical and
supramolecular hydrogen-bonding crosslinks
(p 1133-1141)
Journal of Polymer Science Part A: Polymer Chemistry 48 #5 (2010)
Abstract
Behaviors of self-assembled diblock copolymer
with pendant photosensitive azobenzene segments
(p 1142-1148)
Journal of Polymer Science Part A: Polymer Chemistry 48 #5 (2010)
Abstract
Tailoring the liquid crystalline property via
controlling the generation of dendronized polymers containing azobenzene
mesogen
(p 1149-1159)
Journal of Polymer Science Part A: Polymer Chemistry 48 #5 (2010)
Abstract
Density functional study for the polymerization
of ethylene monomer using a new nickel catalyst
(p 1160-1165)
Journal of Polymer Science Part A: Polymer Chemistry 48 #5 (2010)
Abstract
Synthesis and nonlinear optical properties of
novel Y-type polyurethane containing tricyanovinylthiazole with enhanced thermal
stability of second harmonic generation
(p 1166-1172)
Journal of Polymer Science Part A: Polymer Chemistry 48 #5 (2010)
Abstract
N-vinylcaprolactam-based microgels for
biomedical applications
(p 1173-1181)
Journal of Polymer Science Part A: Polymer Chemistry 48 #5 (2010)
Abstract
A novel thermotropic liquid crystalline
copolyester containing phosphorus and aromatic ether moity toward high flame
retardancy and low mesophase temperature
(p 1182-1189)
Journal of Polymer Science Part A: Polymer Chemistry 48 #5 (2010)
Abstract
SET-LRP of acrylates in air
(p 1190-1196)
Journal of Polymer Science Part A: Polymer Chemistry 48 #5 (2010)
Abstract
Host-guest complexation-triggered chiroptical
change of poly(phenylacetylene)s bearing binaphthocrown ether moieties on the
main chain
(p 1197-1206)
Journal of Polymer Science Part A: Polymer Chemistry 48 #5 (2010)
Abstract
Synthesis of dual pH/temperature-responsive
polymers with amino groups by living cationic polymerization
(p 1207-1213)
Journal of Polymer Science Part A: Polymer Chemistry 48 #5 (2010)
Abstract
Bio-safe synthesis of linear and branched PLLA
(p 1214-1219)
Journal of Polymer Science Part A: Polymer Chemistry 48 #5 (2010)
Abstract
Poly(n-alkylsilsesquioxane)s: Synthesis,
characterization, and modification with poly(dimethylsiloxane)
(p 1220-1229)
Journal of Polymer Science Part A: Polymer Chemistry 48 #5 (2010)
Abstract
Titanium complexes of dialkanolamine ligands as
initiators for living ring-opening polymerization of 
-caprolactone
(p 1230-1240)
Journal of Polymer Science Part A: Polymer Chemistry 48 #5 (2010)
Abstract
Synthesis and solution behavior of comb-like
terpolymers with poly(ethylene oxide) macromonomer
(p 1241-1250)
Journal of Polymer Science Part A: Polymer Chemistry 48 #5 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
29.
Journal of Polymer Science B: Polymer Physics 48, #5 (2010)
(Titles and Abstracts)
Thermosensitive behavior of poly(ethylene
glycol)/poly(2-(N,N-dimethylamino)ethyl methacrylate) double hydrophilic
block copolymers
(p 503-508)
Journal of Polymer Science B: Polymer Physics 48, #5 (2010)
Abstract
Kinetics of degradation of Lycium barbarum
polysaccharide by ultrasonication
(p 509-513)
Journal of Polymer Science B: Polymer Physics 48, #5 (2010)
Abstract
Suppressed molecular orientation in nylon 6/clay
nanocomposite at large strain: Role of microvoiding
(p 514-519)
Journal of Polymer Science B: Polymer Physics 48, #5 (2010)
Abstract
Synergistic effects of PEG and MWCNTs on
crystallization behavior of PLLA
(p 520-528)
Journal of Polymer Science B: Polymer Physics 48, #5 (2010)
Abstract
Self-diffusion of small molecules into rubbery
polymers: A lattice free-volume theory
(p 529-540)
Journal of Polymer Science B: Polymer Physics 48, #5 (2010)
Abstract
Chain orientation and distribution in ring-banded
spherulites formed in poly(ester urethane) multiblock copolymer
(p 541-547)
Journal of Polymer Science B: Polymer Physics 48, #5 (2010)
Abstract
On the multiple crystallization behavior of PTFE
in PMMA/PTFE nanocomposites from core-shell nanoparticles
(p 548-554)
Journal of Polymer Science B: Polymer Physics 48, #5 (2010)
Abstract
Spinodal decomposition and phase separation
kinetics in nanoclay-biopolymer solutions
(p 555-565)
Journal of Polymer Science B: Polymer Physics 48, #5 (2010)
Abstract
Thermodynamic characteristics of
poly(cyclohexylethylene-b-ethylene-co-ethylethylene) block
copolymers
(p 566-574)
Journal of Polymer Science B: Polymer Physics 48, #5 (2010)
Abstract
Controlled crystallization of poly(vinylidene
fluoride) chains from mixed solvents composed of its good solvent and nonsolvent
(p 575-581)
Journal of Polymer Science B: Polymer Physics 48, #5 (2010)
Abstract
Effect of crosslinking on the secondary
relaxation in polyvinylethylene
(p 582-587)
Journal of Polymer Science B: Polymer Physics 48, #5 (2010)
Abstract
Aggregation behavior of polystyrene-b-poly(ethylene/butylene)-b-polystyrene
triblock copolymer in N-methylpyrrolidone
(p 588-594)
Journal of Polymer Science B: Polymer Physics 48, #5 (2010)
Abstract
Effect of alkyl side chain length on the
properties of polyetherimides from molecular simulation combined with
experimental results
(p 595-599)
Journal of Polymer Science B: Polymer Physics 48, #5 (2010)
Abstract
Selective localization of organoclay and effects
on the morphology and mechanical properties of LDPE/PA11 blends with distributed
and co-continuous morphology
(p 600-609)
Journal of Polymer Science B: Polymer Physics 48, #5 (2010)
Abstract
Conformation of nonideal hyperbranched polymer in
ABn (n = 2, 4)
type polymerization
(p 610-616)
Journal of Polymer Science B: Polymer Physics 48, #5 (2010)
Abstract
Fibrils separated from polyacrylonitrile fiber by
ultrasonic etching in dimethylsulphoxide solution
(p 617-619)
Journal of Polymer Science B: Polymer Physics 48, #5 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
30.
Journal of Rheology 54 #1 (2010)
(Titles and Abstracts)
Comparisons of modified effective medium theory with
experimental data on shear thinning of concentrated latex dispersions
(1-26)
Journal of Rheology 54 #1 (2010)
Abstract
Scaling relations in nonlinear viscoelastic behavior of
aqueous PEO solutions under large amplitude oscillatory shear flow
(27-63)
Journal of Rheology 54 #1 (2010)
Abstract
Inclined plane rheometry of a dense granular suspension
(65-79)
Journal of Rheology 54 #1 (2010)
Abstract
Comparison of methods to measure yield stress of soft solids
(81-94)
Journal of Rheology 54 #1 (2010)
Abstract
Planar extensional flow resistance of a foaming plastic
(95-116)
Journal of Rheology 54 #1 (2010)
Abstract
Analysis of the linear viscoelasticity of polyelectrolytes
by magnetic microrheometry—Pulsed creep experiments and the one particle
response
(117-131)
Journal of Rheology 54 #1 (2010)
Abstract
Time-dependent rheology of colloidal star glasses
(133-158)
Journal of Rheology 54 #1 (2010)
Abstract
Effects of partial miscibility on drop-wall and drop-drop
interactions
(159-183)
Journal of Rheology 54 #1 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
31.
Modern Plastics (2010)
(Titles and Abstracts)
Weekly
Trade
Magazine
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
32.
Nanotechnology 21 #8 (2010)
(Titles and Abstracts; Full PDF versions of Articles are available free
for 30 days after publication)
Fabrication of color changeable polystyrene spheres
decorated by gold nanoparticles and their label-free biosensing
(# 085501)
Nanotechnology 21 #8 (2010)
Abstract
Mechanics of nanowire/nanotube in-surface buckling on
elastomeric substrates
(# 085708)
Nanotechnology 21 #8 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
33.
Plastics Europe #1 (2010)
English version of Kunststoffe
(Titles
and Abstracts) Some, not all, articles are available without charge
Trade
Journal
Bakelite Conquers the World
Looking Back
(6-9)
Plastics Europe #1 (2010) English version of Kunststoffe
Ten Things Nobody Has Ever Tried
Prototype Premiere
(10-11)
Plastics Europe #1 (2010) English version of Kunststoffe
Two Processes – One System
PET Conditioning
(14-17)
Plastics Europe #1 (2010) English version of Kunststoffe
Laser Sintering in XXL Format
Production on Demand
(18-19)
Plastics Europe #1 (2010) English version of Kunststoffe
Greater Processing Freedom for Composites
Diaphragm Forming Technology
(20-22)
Plastics Europe #1 (2010) English version of Kunststoffe
Successful New Generation
Productivity Increase
(23-24)
Plastics Europe #1 (2010) English version of Kunststoffe
Efficient Tempering and Economic Cooling
Energy Consumption
(25-26)
Plastics Europe #1 (2010) English version of Kunststoffe
Gliding Boat
Marine Engineering
(27-30)
Plastics Europe #1 (2010) English version of Kunststoffe
Process-Integrated Surface Modification During Injection Molding
Material Bonding
(31-35)
Plastics Europe #1 (2010) English version of Kunststoffe
Selective Galvanizing
Design
(36-37)
Plastics Europe #1 (2010) English version of Kunststoffe
Better Metal Bonding
Surface Pretreatment
(38-42)
Plastics Europe #1 (2010) English version of Kunststoffe
Scratch-Resistant in One Step
PMMA
(43-45)
Plastics Europe #1 (2010) English version of Kunststoffe
Cool More Efficiently
Cold Insulation System
(46-47)
Plastics Europe #1 (2010) English version of Kunststoffe
Losing only Half the Heat
Thermal Insulation Systems
(48-49)
Plastics Europe #1 (2010) English version of Kunststoffe
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
34.
Polymer Composites 31 #3 (2010)
(Titles and Abstracts)
Organic functionalization of carbon nanofibers
for composite applications
(p 369-376)
Polymer Composites 31 #3 (2010)
Abstract
Dynamic and capillary rheology of LDPE-EVA-based
thermoplastic elastomer: Effect of silica nanofiller
(p 377-391)
Polymer Composites 31 #3 (2010)
Abstract
Interfacial strength in short glass fiber
reinforced acrylonitrile-butadiene-styrene/polyamide 6 blends
(p 392-398)
Polymer Composites 31 #3 (2010)
Abstract
Mechanical and thermal properties of
polypropylene nanocomposites using organically modified Indian bentonite
(p 399-404)
Polymer Composites 31 #3 (2010)
Abstract
Preparation and characterization of -irradiated
crosslinked silicone rubber/organoattapulgite composites
(p 405-410)
Polymer Composites 31 #3 (2010)
Abstract
Effect of fiber orientation on viscoelastic
properties of polymer matrix composites subjected to thermal cycles
(p 411-416)
Polymer Composites 31 #3 (2010)
Abstract
Tribological properties of LDPE + Boehmite
composites
(p 417-425)
Polymer Composites 31 #3 (2010)
Abstract
Experimental investigation on the abrasive wear
behavior of nanoclay-filled EVA/LDPE composites
(p 426-433)
Polymer Composites 31 #3 (2010)
Abstract
Investigation of a simple tensorial permeameter
(p 434-442)
Polymer Composites 31 #3 (2010)
Abstract
Compatibility of softwood flour and commercial
biopolymers in injection molding
(p 443-451)
Polymer Composites 31 #3 (2010)
Abstract
Adaptation of polystyrene/multi-wall carbon
nanotube composite properties in respect of its thermal stability
(p 452-458)
Polymer Composites 31 #3 (2010)
Abstract
Synthesis and characterization of short Grewia
optiva fiber-based polymer composites
(p 459-470)
Polymer Composites 31 #3 (2010)
Abstract
Synthesis, electrorheology, and creep behaviors
of in situ intercalated polyindole/organo-montmorillonite conducting
nanocomposite
(p 471-481)
Polymer Composites 31 #3 (2010)
Abstract
Effect of both silane-grafted and ion-exchanged
organophilic clay in structural, thermal, and mechanical properties of
unsaturated polyester nanocomposites
(p 482-490)
Polymer Composites 31 #3 (2010)
Abstract
Synthesis and mechanical properties of
polybenzimidazole nanocomposites reinforced by vapor grown carbon nanofibers
(p 491-496)
Polymer Composites 31 #3 (2010)
Abstract
Effects of carbon fillers in thermally conductive
polypropylene based resins
(p 497-506)
Polymer Composites 31 #3 (2010)
Abstract
Structure and properties of multi-walled carbon
nanotubes/polyethylene nanocomposites synthesized by in situ polymerization with
supported Cp2ZrCl2
catalyst
(p 507-515)
Polymer Composites 31 #3 (2010)
Abstract
Microwave absorption property of polyaniline
nanocomposites containing TiO2
and Fe3O4
nanoparticles after FeCl36H2O
treatment
(p 516-523)
Polymer Composites 31 #3 (2010)
Abstract
Naturally compatible: Starch acetate/cellulosic
fiber composites. I. Processing and properties
(p 524-535)
Polymer Composites 31 #3 (2010)
Abstract
Evaluation of tribological properties of carbon
fiber-reinforced PA6 composites
(p 536-542)
Polymer Composites 31 #3 (2010)
Abstract
Effect of polyphosphazene elastomer on the
compatibility and properties of PES/TLCP composites
(p 543-552)
Polymer Composites 31 #3 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
35.
Rheologica
Acta 49 #2 (2010)
(Titles
and Abstracts)
Extensional rheology of a shear-thickening cornstarch and water suspension
(119-129)
Rheologica Acta 49 #2 (2010)
A double wall-ring geometry for interfacial shear rheometry
(131-144)
Rheologica Acta 49 #2 (2010)
Rheo-PIV analysis of the slip flow of a metallocene linear low-density
polyethylene melt
(145-154)
Rheologica Acta 49 #2 (2010)
Viscoelastic properties of ultra-high viscosity alginates
(155-167)
Rheologica Acta 49 #2 (2010)
A differential model for the rheological properties of concentrated suspensions
with weakly viscoelastic matrices
(169-176)
Rheologica Acta 49 #2 (2010)
Shear rheometry and visualization of glass fiber suspensions
(177-189)
Rheologica Acta 49 #2 (2010)
Large amplitude oscillatory shear of pseudoplastic and elastoviscoplastic
materials
(191-212)
Rheologica Acta 49 #2 (2010)
On secondary loops in LAOS via self-intersection of Lissajous–Bowditch curves
(213-219)
Rheologica Acta 49 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
36.
Fibre
Chemistry 41 #3 ( 2009)
(Titles and Abstracts)
Phase equilibrium in linear polymer—liquid systems and structural and
thermodynamic features of the polymer phase
(147-157)
Fibre Chemistry 41 #3 ( 2009)
Chemical method of surface activation of poly(ethylene terephthalate) fibre
materials
Part 1. Study of the Modifying Effect of Sodium Hydroxide Solutions and
Products Made from Quaternary Ammonium Salts
(158-163
Fibre Chemistry 41 #3 ( 2009)
Thermogravimetric studies of polycaproamide fibre modified by grafting of
polyacrylonitrile
(164-168)
Fibre Chemistry 41 #3 ( 2009)
Effect of chitosan on dyeing of chemical fibres
(169-173)
Fibre Chemistry 41 #3 ( 2009)
Characteristics of the combustibility of fibre-forming polymers, fibres, and
fibre materials (textiles)
(174-185)
Fibre Chemistry 41 #3 ( 2009)
Polyamide fibres with improved properties
(186-188)
Fibre Chemistry 41 #3 ( 2009)
Description of creep of complex fibres made from rigid-chain polymers
(189-193)
Fibre Chemistry 41 #3 ( 2009)
Identification of the composition of the raw material in surgical sutures in
evaluation of their quality |
(194-197)
Fibre Chemistry 41 #3 ( 2009)
Analysis of strength formation in twistless yarn made of chemical fibres and
blends
(198-202)
Fibre Chemistry 41 #3 ( 2009)
New technical proposals on execution of an interconnected synchronous drive
for the takeup-winding unit of spinning machines
(203-208)
Fibre Chemistry 41 #3 ( 2009)
Development of a Simulink model of a fibre-detachment control system in wool
combing
(209-213)
Fibre Chemistry 41 #3 ( 2009)
Analysis of chemical fibre product production
(214-219)
Fibre Chemistry 41 #3 ( 2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
37.
Flow Measurement and Instrumentation 20 #6 (2009)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
38.
Fluid
Dynamics
44 #6 (2009)
(Titles and Abstracts)
Intensification of the performance of kinetic
inhibitors in the presence of polyethylene oxide and polypropylene oxide for
simple gas hydrate formation in a flow mini-loop apparatus
(129-134)
Fluid
Dynamics
44 #6 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
39.
Fluid
Phase Equilibria 289 #2 (2010)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
40.
Fullerenes, Nanotubes
and Carbon Nanostructures 18 #1 (2010)
(Titles
and Abstracts)
Calculations of Encapsulation of Amino Acids Inside the (13, 0) Single-walled
Carbon Nanotube
(24 – 36)
Fullerenes, Nanotubes
and Carbon Nanostructures 18 #1 (2010)
Radiation Vulcanization of Natural Rubber Latex Loaded with Carbon Nanotubes
(56 – 71)
Fullerenes, Nanotubes
and Carbon Nanostructures 18 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
41.
Green
Chemistry
12 #1 (2010)
(Titles
and Abstracts)
Solubilisation of
-chymotrypsin
by hydrophobic ion pairing in fluorous systems and supercritical carbon dioxide
and demonstration of efficient enzyme recycling
(54 - 59)
Green
Chemistry
12 #1 (2010)
Green
Chemistry
12 #1 (2010)Perfluoro-tagged,
phosphine-free palladium nanoparticles supported on silica gel: application to
alkynylation of aryl halides, Suzuki–Miyaura cross-coupling, and Heck reactions
under aerobic conditions
(150 - 158)
Green
Chemistry
12 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
42.
Heat Transfer Engineering 31 #7 (2010)
(Titles
and Abstracts)
Analysis of Infiltration, Solidification, and Remelting of a Pure Metal in
Subcooled Porous Preform
(555 – 563)
Heat Transfer Engineering 31 #7 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
43.
Inorganic
Materials
46 #1 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
44.
Instrumentation Science and Technology 38 #1
(2010)
(Titles and Abstracts)
SPECTRAL METHODS FOR HISTORICAL PAPER ANALYSIS: COMPOSITION AND AGE
APPROXIMATION
(96 – 106)
Instrumentation Science and Technology 38 #1
(2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
45.
Integrated
Ferroelectrics
110 (2009)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
46.
International Biodeterioration & Biodegradation 64 #1 (2010)
(Titles and Abstracts)
Xylanase production by
Paenibacillus campinasensis BL11 and
its pretreatment of hardwood kraft pulp bleaching
(13-19)
International Biodeterioration & Biodegradation 64 #1 (2010)
The potential of agro-industrial residues for
production of holocellulase from filamentous fungi
(20-26)
International Biodeterioration & Biodegradation 64 #1 (2010)
Use of DEAE cellulose adsorbed and crosslinked
white radish (Raphanus sativus)
peroxidase for the removal of α-naphthol in batch and continuous process
(27-31)
International Biodeterioration & Biodegradation 64 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
47.
International Journal of Adhesion and Adhesives 30 #2 (2010)
(Titles and Abstracts)
Qualification of adhesives for marine
composite-to-steel applications
(55-62)
International Journal of Adhesion and Adhesives 30 #2 (2010)
A new method for the determination of bending
moments in single lap joints
(63-71)
International Journal of Adhesion and Adhesives 30 #2 (2010)
Comparing bond strength and water resistance of
alkali-modified soy protein isolate and wheat gluten adhesives
(72-79)
International Journal of Adhesion and Adhesives 30 #2 (2010)
Study on the curing process and shearing tests
of die attachment by Ag-epoxy electrically conductive adhesive
(80-88)
International Journal of Adhesion and Adhesives 30 #2 (2010)
Experimentation on adhesion of epoxy
(89-104)
International Journal of Adhesion and Adhesives 30 #2 (2010)
Shelf stability of reactive adhesive
formulations: A case study for dicyandiamide-cured epoxy systems
(105-110)
International Journal of Adhesion and Adhesives 30 #2 (2010)
The effect of substituted poly(p-xylylene)
on the quality of bonded joints when used as a primer replacement
(111-116)
International Journal of Adhesion and Adhesives 30 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
48.
International
Journal of Damage Mechanics
19 #1 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
49.
International Journal of Engineering Science 48 #3 (2010)
(Titles and Abstracts)
A three-dimensional network model for rubber
elasticity: The effect of local entanglements constraints
(265-274)
International Journal of Engineering Science 48 #3 (2010)
Analytical model of thermal stresses in two-
and three-component materials
(290-311)
International Journal of Engineering Science 48 #3 (2010)
An extension of Hill’s localized necking model
(312-331)
International Journal of Engineering Science 48 #3 (2010)
Transverse conductivity of unidirectional
fibrous composite with interface arc cracks
(343-356)
International Journal of Engineering Science 48 #3 (2010)
Nonlinear theory of hard-skin plates and shells
(357-369)
International Journal of Engineering Science 48 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
50.
International Journal of Fatigue 32 #5 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
51.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
52.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
53.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
54.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
55.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
56.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
57.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
58.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
59.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
60.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
61.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
62.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
63.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
64.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
65.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
66.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
67.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
68.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
67.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
70.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Roger D.
Corneliussen
Editor
Telephone: 610 883 0055
rcorneliussen@4spe.org
www.maropolymeronline.com
Copyright 2009 by Roger D. Corneliussen