Copyright 2009 by Roger D. Corneliussen
Below are links to the new articles by journals. A click should take you to the journal website. This is a great variation in where one ends up. In some cases, a click will take you to the issue in other cases a click will take you to the website and you must do a few more clicks to get to the issue. This is controlled by the publisher and not Maro. Fortunately, with a little practice, this should not be a serious problem. (RDC)
Polymer
Track (News)
Updated daily
Week 5 (2/1-2/5)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
01.
Advanced
Composite Materials
19, #1 (2010)
(Titles
and Abstracts
A Probabilistic SCG Model for Transverse Cracking in CFRP Cross-ply Laminates
under Cyclic Loading
(1-17)
Advanced
Composite Materials
19, #1 (2010)
Development of Lightweight Composite Pallets for Assembly Line of LCDs and PDPs
(55-62)
Advanced
Composite Materials
19, #1 (2010)
Tensile Properties of Carbon Fiber Composites with Different Resin Compositions
at Cryogenic Temperatures
(63-77)
Advanced
Composite Materials
19, #1 (2010)
Three-Point Flexural Behaviour of GFRP Sandwich Composites: A Failure Map
(79-90)
Advanced
Composite Materials
19, #1 (2010)
Coir Fiber Reinforced Polypropylene Composites: Physical and Mechanical
Properties
(91-106)
Advanced
Composite Materials
19, #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
02.
Advanced Drug Delivery Reviews 62 #1 (2010)
(Titles and Abstracts)
Chitosan-based formulations of drugs, imaging
agents and biotherapeutics
(1-2)
Advanced Drug Delivery Reviews 62 #1 (2010)
Biodegradation, biodistribution and toxicity of
chitosan
(3-11)
Advanced Drug Delivery Reviews 62 #1 (2010)
Chitosan-based formulations for delivery of DNA
and siRNA
(12-27)
Advanced Drug Delivery Reviews 62 #1 (2010)
Targeted delivery of low molecular drugs using
chitosan and its derivatives
(28-41)
Advanced Drug Delivery Reviews 62 #1 (2010)
Chitosan-based systems for molecular imaging
(42-58)
Advanced Drug Delivery Reviews 62 #1 (2010)
Chitosan-based delivery systems for protein
therapeutics and antigens
(59-82)
Advanced Drug Delivery Reviews 62 #1 (2010)
Chitosan-based nanostructures: A delivery
platform for ocular therapeutics
(100-117)
Advanced Drug Delivery Reviews 62 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
03.
The Analyst 135 #2 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
04. Analytical
Chemistry
82, #3 (2010)
(Titles and Abstracts)
Luminescence Oxygen Sensor Based on a Ruthenium(II) Star Polymer Complex
(917–921)
Analytical Chemistry 82, #3 (2010)
Amperometric Detection of Dopamine in Vivo with an Enzyme Based Carbon Fiber
Microbiosensor
(989–996)
Analytical Chemistry 82, #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
05.
Angewandte Chemie International Edition 49 #7 (2010)
(Titles and Abstracts)
Gold-Catalyzed Phosgene-Free Synthesis of
Polyurethane Precursors
(p 1286-1290)
Angewandte Chemie International Edition 49 #7 (2010)
Abstract
Hybrid Polymer Electrolyte Fuel Cells: Alkaline
Electrodes with Proton Conducting Membrane
(p 1299-1301)
Angewandte Chemie International Edition 49 #7 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
06.
Analytical
Letters
43 #3 (2010)
(Titles and Abstracts)
Poly(amidoamine) Dendrimer-Functionalized Magnetic Beads as an Immunosensing
Probe for Electrochemical Immunoassay for Carbohydrate Antigen-125 in Human
Serum
(455 – 465)
Analytical
Letters
43 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
07.
Appliance Design (February 2010)
(Titles, Abstracts
and Articles)
Trade
Journal xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
08.
Applied Catalysis A: General 375 #1 (2010)
Titles and Abstracts
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
09.
Applied Physics
Letters 96 #4 (2010)
Titles and Abstracts
Polymer/carbon nanotube composite patterns via laser induced forward transfer
(# 041104)
Applied Physics Letters 96 #4 (2010)
Mechanically tunable surface plasmon resonance based on gold nanoparticles
and elastic membrane polydimethylsiloxane composite
(# 041904)
Applied Physics Letters 96 #4 (2010)
Elastic-strain distribution in metallic film-polymer substrate composites
(# 041905)
Applied Physics Letters 96 #4 (2010)
Perfect spin-filter and spin-valve in carbon atomic chains
(# 042104)
Applied Physics Letters 96 #4 (2010)
The influence of coiled nanostructure on the enhancement of dielectric
constants and electromagnetic shielding efficiency in polymer composites
(# 043115)
Applied Physics Letters 96 #4 (2010)
Visualization of the cation migration in ionic polymer-metal composite under
an electric field
(# 043301)
Applied Physics Letters 96 #4 (2010)
Surface segregation at the aluminum interface of
poly(3-hexylthiophene)/fullerene solar cells
(# 043305)
Applied Physics Letters 96 #4 (2010)
Light-emitting electrochemical cells using polymeric ionic liquid/polyfluorene
blends as luminescent material
(# 043308)
Applied Physics Letters 96 #4 (2010)
Effect of leaning angle of gecko-inspired slanted polymer nanohairs on dry
adhesion
(# 043704)
Applied Physics Letters 96 #4 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
10.
Applied Surface Science 256 #9 (2010)
(Titles
and Abstracts)
The influence of γ-irradiation on some physical
properties of chlorophyll/PMMA films
(2711-2718)
Applied Surface Science 256 #9 (2010)
Surface characterization of polyethylene
terephthalate/silica nanocomposites
(2792-2802)
Applied Surface Science 256 #9 (2010)
Optical properties and electric conductivity of
gold nanoparticle-containing, hydrogel-based thin layer composite films obtained
by photopolymerization
(2809-2817)
Applied Surface Science 256 #9 (2010)
Ordered luminescent nanohybrid thin films of
Eu(BA)3Phen nanoparticle in polystyrene matrix from diblock copolymer
self-assembly
(2818-2825)
Applied Surface Science 256 #9 (2010)
Solvothermal synthesis and characterization of
sandwich-like graphene/ZnO nanocomposites
(2826-2830)
Applied Surface Science 256 #9 (2010)
Effects of UV-irradiation on the
thermo-mechanical properties of optical grade poly(methyl methacrylate)
(2927-2933)
Applied Surface Science 256 #9 (2010)
In situ preparation and fluorescence quenching
properties of polythiophene/ZnO nanocrystals hybrids through atom-transfer
radical polymerization and hydrolysis
(2948-2955)
Applied Surface Science 256 #9 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
11.
Biomaterials 31 #10 (2010)
(Titles
and Abstracts)
Electroconductive hydrogels: Synthesis,
characterization and biomedical applications
(2701-2716)
Biomaterials 31 #10 (2010)
A versatile pH sensitive chondroitin
sulfate–PEG tissue adhesive and hydrogel
(2788-2797)
Biomaterials 31 #10 (2010)
Poly(3-hydroxybutyrate) multifunctional
composite scaffolds for tissue engineering applications
(2806-2815)
Biomaterials 31 #10 (2010)
The biocompatibility of Pluronic®F127
fibrinogen-based hydrogels
(2836-2847)
Biomaterials 31 #10 (2010)
The osteogenic properties of CaP/silk composite
scaffolds
(2848-2856)
Biomaterials 31 #10 (2010)
The intracellular drug delivery and anti tumor
activity of doxorubicin loaded poly(γ-benzyl
(2882-2892)
Biomaterials 31 #10 (2010)
DNA/polyethyleneimine/hyaluronic acid small
complex particles and tumor suppression in mice
(2912-2918)
Biomaterials 31 #10 (2010)
pH responsive properties of non-fouling
mixed-charge polymer brushes based on quaternary amine and carboxylic acid
monomers
(2919-2925)
Biomaterials 31 #10 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
12.
Biomedical Engineering 43 #5 (2008)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
13.
Biomedical
Microdevices 12 #1 ( 2010)
(Titles and Abstracts)
Targeted cell adhesion on selectively micropatterned polymer arrays on a
poly(dimethylsiloxane) surface
(13-21)
Biomedical Microdevices 12 #1 ( 2010)
Fabrication of three-dimensional microarray structures by controlling the
thickness and elasticity of poly(dimethylsiloxane) membrane
(49-54)
Biomedical Microdevices 12 #1 ( 2010)
Nanostructured conducting polymer based reagentless capacitive immunosensor
(63-70)
Biomedical Microdevices 12 #1 ( 2010)
Formation of biodegradable microcapsules utilizing 3D, selectively
surface-modified PDMS microfluidic devices
(125-133)
Biomedical Microdevices 12 #1 ( 2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
14.
British Plastics and Rubber (February 2010)
(Titles and Abstracts) (H)
Trade Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
15.
Catalysis Communications 11 #6 (2009)
(Titles
and Abstracts)
Direct conversion of cellulose into hydrogen by
aqueous-phase reforming process
(522-526)
Catalysis Communications 11 #6 (2009)
Enhanced catalytic activity of lipase in situ
encapsulated in electrospun polystyrene fibers by subsequent water supply
(576-580)
Catalysis Communications 11 #6 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
16.
Chemical Communications #6 (2010)
(Titles, Abstracts and Articles)
A quartz crystal microbalance-based molecular ruler for biopolymers
(949 - 951)
Chemical Communications #6 (2010)
Metal salt induced synthesis of hybrid metal core–siloxane shell nanoparticles
and siloxane nanowires
(964 - 966)
Chemical Communications #6 (2010)
Tröger
s
base-functionalised organic nanoporous polymer for heterogeneous catalysis
(970 - 972)
Chemical Communications #6 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
17.
Chemical Engineering (February 2010)
(Titles and Abstracts) (T)
Trade Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
18.
Chemical Engineering Science 65 #4 (2010)
(Titles and Abstracts) (T)
Tri-helical gravure roll coating
(1311-1321)
Chemical Engineering Science 65 #4 (2010)
Mass transport and membrane separations:
Universal description in terms of physicochemical potential and Einstein's
mobility
(1474-1489)
Chemical Engineering Science 65 #4 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
19.
Chemical Physics 367 #2-3 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
20.
Chemical
Society Reviews 39 #2 (2010)
(Titles and Abstracts)
Polymer organogelators that make supramolecular organogels through physical
cross-linking and self-assembly
(455 - 463)
Chemical
Society Reviews 39 #2 (2010)
Active and responsive polymer surfaces
(676 - 693)
Chemical
Society Reviews 39 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
21.
Chemical
Week
Titles and Abstracts) Weekly (H)
Trade
Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
22.
Chemistry of Materials 22 #3 (2010)
(Titles
and Abstracts)
Synthesis of A Novel Spirobisnitroxide Polymer and its Evaluation in an Organic
Radical Battery
(783–788)
Chemistry of Materials 22 #3 (2010)
Multilayer Sulfonated Polyhedral Oligosilsesquioxane (S-POSS)-Sulfonated
Polyphenylsulfone (S-PPSU) Composite Proton Exchange Membranes
(942–948)
Chemistry of Materials 22 #3 (2010)
Supercapacitor-Type Behavior of Carbon Composite and Replica Obtained from
Hybrid Layered Double Hydroxide Active Container
(974–987)
Chemistry of Materials 22 #3 (2010)
Sulfonated Polybenzothiazoles: A Novel Candidate for Proton Exchange Membranes
(1022–1031)
Chemistry of Materials 22 #3 (2010)
Crystal Structure and Electrochemical Properties of A2MPO4F Fluorophosphates (A
= Na, Li; M = Fe, Mn, Co, Ni)
(1059–1070)
Chemistry of Materials 22 #3 (2010)
Titania Nanosheets (TNS)/Sulfonated Poly Ether Ether Ketone (SPEEK)
Nanocomposite Proton Exchange Membranes for Fuel Cells
(1126–1133)
Chemistry of Materials 22 #3 (2010)
Ionothermal Synthesis of Li-Based Fluorophosphates Electrodes
(1142–1148)
Chemistry of Materials 22 #3 (2010)
Enhancement of Electrochemical Performance of Macroporous Carbon by Surface
Coating of Polyaniline
(1195–1202)
Chemistry of Materials 22 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
23.
Colloid and Polymer Science 288 #4 (2010)
(Titles and Abstracts)
The influence of crystal formation on segmental mobility in polymers: hints from
a statistical mechanical relaxation model
(365-376)
Colloid and Polymer Science 288 #4 (2010)
An investigation on dispersion of carbon nanotubes in chitosan aqueous solutions
(377-385)
Colloid and Polymer Science 288 #4 (2010)
Growth mechanism of gold nanoparticles decorated on polystyrene spheres via
self-regulated reduction
(395-403)
Colloid and Polymer Science 288 #4 (2010)
Viscoelastic solution of long polyoxyethylene chain
phytosterol/monoglyceride/water systems
(405-414)
Colloid and Polymer Science 288 #4 (2010)
The surface property and aggregation behavior of a hydrophobically modified
cyclodextrin
(415-421)
Colloid and Polymer Science 288 #4 (2010)
Controlled crystallization of titanium dioxide particles in the presence of
poly(vinyl alcohol) from peroxytitanic acid
(433-438)
Colloid and Polymer Science 288 #4 (2010)
Phase behavior and interactions in blends of poly[(butylene
adipate)-co-poly(butylene terephthalate)] copolyester with poly(4-vinyl phenol)
(439-448)
Colloid and Polymer Science 288 #4 (2010)
New types of self-organizing interfacial alginate membranes
(461-468)
Colloid and Polymer Science 288 #4 (2010)
The preparation of inorganic/organic hybrid nanomaterials containing
silsesquioxane and its reinforcement for an epoxy resin network
(469-477)
Colloid and Polymer Science 288 #4 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
24.
Composites Part B: Engineering 41 #2 (2010)
(Titles
and Abstracts)
Design of robust and ductile FRP structures
incorporating ductile adhesive joints
(148-156)
Composites Part B: Engineering 41 #2 (2010)
Integrated high-performance thousand-metre
scale cable-stayed bridge with hybrid FRP cables
(166-175)
Composites Part B: Engineering 41 #2 (2010)
Fire performance of composite laminates
embedded with multi-ply carbon nanofiber sheets
(176-181)
Composites Part B: Engineering 41 #2 (2010)
Comparison of shear strength tests on AV119
epoxy-joined carbon/carbon composites
(182-191)
Composites Part B: Engineering 41 #2 (2010)
Carbon nanofiber paper for lightning strike
protection of composite materials
(192-198)
Composites Part B: Engineering 41 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
25.
Composites
Science and Technology 70 #3 (20010)
(Titles and Abstracts)
The effects of surface elasticity and surface
tension on the transverse overall elastic behavior of unidirectional nano-composites
(427-434)
Composites
Science and Technology 70 #3 (20010)
Co-cured in-line joints for natural fibre
composites
(442-449)
Composites
Science and Technology 70 #3 (20010)
Compatibilizing effect of acrylic acid modified
polypropylene on the morphology and permeability properties of polypropylene/organoclay
nanocomposites
(458-465)
Composites
Science and Technology 70 #3 (20010)
Infrared and microwave absorbing properties of
BaTiO3/polyaniline and BaFe12O19/polyaniline
composites
(466-471)
Composites
Science and Technology 70 #3 (20010)
Terahertz spectroscopy to study the orientation
of glass fibres in reinforced plastics
(472-477)
Composites
Science and Technology 70 #3 (20010)
Thermal properties of wood-derived
copper–silicon carbide composites fabricated via electrodeposition
(478-484)
Composites
Science and Technology 70 #3 (20010)
Processing of wood-derived copper–silicon
carbide composites via electrodeposition
(485-491)
Composites
Science and Technology 70 #3 (20010)
Synthesis of BaTiO3 nanoparticle/poly(2-hydroxyethyl
methacrylate) hybrid nanofibers via electrospinning
(492-497)
Composites
Science and Technology 70 #3 (20010)
Interfacial polymerization to high-quality
polyacrylamide/polyaniline composite hydrogels
(498-503)
Composites
Science and Technology 70 #3 (20010)
Renewable biocomposites of dimer fatty
acid-based polyamides with cellulose fibres: Thermal, physical and mechanical
properties
(504-509)
Composites
Science and Technology 70 #3 (20010)
Statistical continuum theory for the effective
conductivity of fiber filled polymer composites: Effect of orientation
distribution and aspect ratio
(510-517)
Composites
Science and Technology 70 #3 (20010)
Preparation and mechanical characterization of
laser ablated single-walled carbon-nanotubes/polyurethane nanocomposite
microbeams
(518-524)
Composites
Science and Technology 70 #3 (20010)
Yield behaviour of renewable biocomposites of
dimer fatty acid-based polyamides with cellulose fibres
(525-529)
Composites
Science and Technology 70 #3 (20010)
Interlaminar stress recovery for
three-dimensional finite elements
(530-538)
Composites
Science and Technology 70 #3 (20010)
Dielectric properties of Poly(vinylidene
fluoride)/CaCu3Ti4O12 composites
(539-545)
Composites
Science and Technology 70 #3 (20010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
26.
Composite Structures 92 #6 (2010)
(Titles and Abstracts)
High CNT content composites with CNT Buckypaper
and epoxy resin matrix: Impregnation behaviour composite production and
characterization
(1291-1298)
Composite Structures 92 #6 (2010)
An accurate higher-order theory and C0
finite element for free vibration analysis of laminated composite and sandwich
plates
(1299-1307)
Composite Structures 92 #6 (2010)
Strength and ductility of FRP web-bonded RC
beams for the assessment of retrofitted beam–column joints
(1325-1332)
Composite Structures 92 #6 (2010)
Experimental investigation of bridging law for
single stitch fibre using Interlaminar tension test
(1399-1409)
Composite Structures 92 #6 (2010)
Conductive CNF-reinforced hybrid composites by
injection moulding
(1416-1422)
Composite Structures 92 #6 (2010)
Buckling of the CCFF orthotropic rectangular
plates under in-plane pure bending
(1423-1431)
Composite Structures 92 #6 (2010)
Effect of Nylon-66 nano-fiber interleaving on
impact damage resistance of epoxy/carbon fiber composite laminates
(1432-1439)
Composite Structures 92 #6 (2010)
Sandwich structures with textile-reinforced
composite foldcores under impact loads
(1485-1497)
Composite Structures 92 #6 (2010)
Composite endplates with pre-curvature for
PEMFC (polymer electrolyte membrane fuel cell)
(1498-1503)
Composite Structures 92 #6 (2010)
Axiomatic design of the sandwich composite
endplate for PEMFC in fuel cell vehicles
(1504-1511)
Composite Structures 92 #6 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
27.
Corrosion Science 52 #3 (2010)
(Titles and Abstracts)
Examination of organic coatings on metallic
substrates by scanning electrochemical microscopy in feedback mode: Revealing
the early stages of coating breakdown in corrosive environments
(748-753)
Corrosion Science 52 #3 (2010)
Influence of interface chemistry and network
density on interfacial ion transport kinetics for styrene/acrylate copolymer
coated zinc and iron substrates
(754-760)
Corrosion Science 52 #3 (2010)
Chlorinated rubber paints for corrosion
prevention of mild steel: A comparison between zinc phosphate and polyaniline
pigments
(901-909)
Corrosion Science 52 #3 (2010)
Effect of thermal annealing on the corrosion
protection of stainless steel by poly(3-octyl thiophene)
(1086-1092)
Corrosion Science 52 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
28.
Dalton Transactions #6 (2010)
(Titles
and Abstracts)
Unprecedented three-step spin-crossover transition in new 2-dimensional
coordination polymer {FeII(4-methylpyridine)2[AuI(CN)2]2}
(1719 - 1721)
Dalton Transactions #6 (2010)
Intermatrix synthesis of polymer stabilized inorganic nanocatalyst with maximum
accessibility for reactants
(1751 - 1757)
Dalton Transactions #6 (2010)
A new spin crossover heterometallic FeIIAgI
coordination polymer with the [Ag2(CN)3]-
unit: crystallographic and magnetic study
(1786 - 1790)
Dalton Transactions #6 (2010)
X-Ray structural and gas phase studies of silver(I)
perfluorinated carboxylate complexes with 2,2
-bipyridyl
as potential precursors for chemical vapour deposition (CVD)
(1823 - 1830)
Dalton Transactions #6 (2010)
Reverse orders of reactivities in the polymerization of cyclic esters using N2O2
aluminium alkoxide complexes
(1865 - 1871)
Dalton Transactions #6 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
29.
Designed
Monomers and Polymers 13 #1 (2010)
(Titles
and Abstracts)
Co-polymerization of Isobutyl/4-Hydroxybutyl Vinyl Ether and Maleic Anhydride
(1-11)
Designed
Monomers and Polymers 13 #1 (2010)
Characterization of Polyethylene Synthesized by Bi-Nickel Catalysts
(13-20)
Designed
Monomers and Polymers 13 #1 (2010)
Photo-polymers Containing (S)-Phenylalanine and Stilbene Pendants: Synthesis and
Properties of Ionic Polyacrylates
(21-32)
Designed
Monomers and Polymers 13 #1 (2010)
Studies of Silicon-Containing Bismaleimide Resins. Part I: Synthesis and
Characteristics of Model Compounds and Polyaspartimides
(33-49)
Designed
Monomers and Polymers 13 #1 (2010)
High-Speed Microwave-Promoted Direct Poly-amidation Reactions of Bulky Chiral
Dicarboxylic Acide with Different Aromatic Diamines in Imidazolium Types Ionic
Liquid as a Reaction Medium
(51-64)
Designed
Monomers and Polymers 13 #1 (2010)
Synthesis and Characterization of Novel Chain-Linked Biodegradable Polymers
(65-72)
Designed
Monomers and Polymers 13 #1 (2010)
Synthesis and Properties of Non-functional Cubic Silsesquioxane Macromonomers
(73-85)
Designed
Monomers and Polymers 13 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
30.
Diamond and Related Materials 19 #2-3 (2010)
(Titles
and Abstracts)
The stability of the CNT/Ni field emission
cathode fabricated by the composite plating method
(158-161)
Diamond and Related Materials 19 #2-3 (2010)
Photo-conductivity and Hall mobility of holes
at polypyrrole–diamond interface
(174-177)
Diamond and Related Materials 19 #2-3 (2010)
Thermal interface tailoring in composite
materials
(268-272)
Diamond and Related Materials 19 #2-3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
31.
Environmental
Science & Technology 44 #3 (2010)
(Titles
and Abstracts)
Predicting Sediment Sorption Coefficients for Linear Alkylbenzenesulfonate
Congeners from Polyacrylate−Water Partition Coefficients at Different Salinities
(941–947)
Environmental Science & Technology 44 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
32.
e-Polymers (2/3/2010) (8)
(Titles, Abstracts and Articles)
005[2010] Investigation of gel-spun PAN fiber morphology by membrane
technology Techniques
e-Polymers (2/3/2010)
[Abstract]
006[2010] Modification of poly(D,L-lactic acid)-co-poly(ethylene glycol)
copolymer by low energy electron beam (EB) radiation
e-Polymers (2/3/2010)
[Abstract]
[full text]
007[2010] Effect of cure cycle on temperature/degree of cure field and
hardness for epoxy resin
e-Polymers (2/3/2010)
[Abstract]
008[2010] Biodegradation of starch incorporated polylactic acid with acrylic
acid as interfacial linker
e-Polymers (2/3/2010)
[Abstract]
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
33.
European Coatings, February (2010)
(Titles, Abstracts and Articles)
Trade
Journal
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
34.
European Journal of Physics 31 #2
(2010)
(Titles
and Abstracts; Full PDF versions of Articles are available free for 30 days after
publication)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
35.
Heat Transfer Engineering 31 #8 (2010)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
36.
Injection Molding Magazine (February 2010)
(Titles, Abstracts and
Articles)
Trade
Magazine
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
37.
International Journal of Polymer Analysis and Characterization 15 #2 (2010)
(Titles and Abstracts)
Comparison of Surface Modifications Induced by Ion Implantation in UHMWPE
(73 – 86)
International Journal of Polymer Analysis and Characterization 15 #2 (2010)
Mechanical, Morphological, and Thermal Characterization of Compression-Molded
Polymer Biocomposites
(87 – 97)
International Journal of Polymer Analysis and Characterization 15 #2 (2010)
Synthesis and Characterization of Colloidal Crystal Array of
Polystyrene-Hydrophilic Monomer Microgels
(98 – 109)
International Journal of Polymer Analysis and Characterization 15 #2 (2010)
Structure, Thermal, and Antibacterial Properties of Polyacrylonitrile/Ferric
Chloride Nanocomposite Fibers by Electrospinning
(110 – 118)
International Journal of Polymer Analysis and Characterization 15 #2 (2010)
Characterization of Novel Epoxy Composites Based on Hybrid Inorganic/Organic
Polyhedral Oligomeric Silsesquioxane
(119 – 128)
International Journal of Polymer Analysis and Characterization 15 #2 (2010)
Novel Hydrophilic Poly(Vinyl Ester Resin-co-Ethylene Dimethacrylate) Monolith
for Bioseparation
(129 – 136)
International Journal of Polymer Analysis and Characterization 15 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
38.
Journal
of Bioactive and Compatible Polymers
25 #1 (2010)
(Titles
and Abstracts)
High-molecular-weight Polymers Containing Biodegradable
Disulfide Bonds: Synthesis and In Vitro Verification of Intracellular
Degradation
(5-26)
Journal of Bioactive and Compatible Polymers 25 #1 (2010)
[Abstract]
Effect of Surface-activated PLLA Scaffold on Apatite
Formation in Simulated Body Fluid
(27-39)
Journal of Bioactive and Compatible Polymers 25 #1 (2010)
[Abstract]
Electrospun Polyacrylonitrile Nanofibrous Membranes
Tailored for Acetylcholinesterase Immobilization
(40-57)
Journal of Bioactive and Compatible Polymers 25 #1 (2010)
[Abstract]
A Cytocompatible Poly(N-isopropylacrylamide-co-glycidylmethacrylate)
Coated Surface as New Substrate for Corneal Tissue Engineering
(58-74)
Journal of Bioactive and Compatible Polymers 25 #1 (2010)
[Abstract]
PEGylation of Melittin: Structural Characterization and
Hemostatic Effects
(75-97)
Journal of Bioactive and Compatible Polymers 25 #1 (2010)
|[Abstract]
Double Cross-linked Chitosan—Gelatin Particulate
Systems for Ophthalmic Applications
(98-116)
Journal of Bioactive and Compatible Polymers 25 #1 (2010)
[Abstract]
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
39.
Journal
of Elastomers and Plastics 42 #1 (2010)
(Titles and Abstracts)
Influence of Reaction Volume on the Properties of
Natural Rubber-g-Methyl Methacrylate
(17-34)
Journal of Elastomers and Plastics 42 #1 (2010)
[Abstract]
Poly(Methyl Methacrylate-co-Styrene) Modified with
Hydrogenated Natural Rubber
(35-47)
Journal of Elastomers and Plastics 42 #1 (2010)
[Abstract]
Surface Graft Modification of Styrene—Butadiene—Styrene
Triblock Copolymer Membrane by Ultraviolet Irradiation
(49-64)
Journal of Elastomers and Plastics 42 #1 (2010)
[Abstract]
Characteristics of Acrylic Rubber Composites with Mica
and Carbon Black
(65-74)
Journal of Elastomers and Plastics 42 #1 (2010)
[Abstract]
Flowing Performance, Microstructures, and Fracture
Toughness of Dynamically Vulcanized PP/EPDM Blends
(75-91)
Journal of Elastomers and Plastics 42 #1 (2010)
[Abstract]
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
40.
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #3 (2010)
(Titles and Abstracts) (H)
Synthesis and Characterization of Thermoplastic Polyurethaneureas based on
Polyisobutylene and Poly(tetramethylene oxide) Segments
(186 – 191)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #3 (2010)
Novel Copolymers of Trisubstituted Ethylenes and Styrene. 9. Some
Ring-Substituted Ethyl 2-Cyano-1-oxo-3-phenyl-2-propenylcarbamates
(192 – 196)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #3 (2010)
Novel Copolymers of 4-Fluorostyrene. 1. Alkyl Ring-Substituted
2-Phenyl-1,1-dicyanoethylenes
(197 – 201)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #3 (2010)
Polycondensations of Substituted Maleic Anhydrides and 1,6-Hexanediol Catalyzed
by Metal Triflates
(202 – 208)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #3 (2010)
L-Dopa Synthesis on Conducting Polymers
(209 – 214)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #3 (2010)
Synthesis and Characterization of Novel Segmented Polyionenes Based on
Polydimethylsiloxane Soft Segments
(215 – 224)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #3 (2010)
Synthesis and Anion Binding Properties of Diamide Derivatives of p-tert-Butylcalix[4]arene
(225 – 229)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #3 (2010)
Design, Synthesis and Characterization of A Novel Cationic Polymer Poly(lactic
acid-b-L-lysine)
(230 – 234)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #3 (2010)
Synthesis and Characterization of 2-Hydroxyethyl Methacrylate (HEMA) and Methyl
Methacrylate (MMA) Copolymer Used as Biomaterial
(235 – 240)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #3 (2010)
Development of Poly(ethylene glycol) Based Amphiphilic Copolymers for Controlled
Release Delivery of Carbofuran
(241 – 247)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #3 (2010)
Multi-Methyl-Substituted Polyphenylquinoxalines with High Solubility and High
Glass Transition Temperatures: Synthesis and Characterization
(248 – 253)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #3 (2010)
Effect of Organoclays on Silicate Layer Structures and Thermal Stabilities of
in-situ Polymerized Poly(D-lactide)/Clay Nanocomposites
(254 – 264)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #3 (2010)
Synthesis and Characterization of a Novel Macromonomer Initiator for Reversible
Addition Fragmentation Chain Transfer (RAFT). Evaluation of the Polymerization
Kinetics and Gelation Behaviors
(265 – 272)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #3 (2010)
Influence of Crosslinking Agent on the Release of Drug from the Matrix
Transdermal Patches of HPMC/Eudragit RL 100 Polymer Blends
(273 – 281)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #3 (2010)
Isomeric Effects on Structures and Properties of Polyaminophenols Synthesized in
Basic Medium
(282 – 290)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #3 (2010)
Synthesis and Characterization of Novel Polyamide Containing Ferrocene and Thio-Ether
Units
(291 – 301)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
41.
Journal of Materials
Science 45 #6 (2010)
(Titles and Abstracts) (H)
Enhanced thermal stability in K2O-metakaolin-based geopolymer
concretes by Al2O3 and SiO2 fillers addition
(1715-1724)
Journal of Materials Science 45 #6 (2010)
Hybrid resins from polyisocyanate, epoxy resin and water glass: chemistry,
structure and properties
(1734-1743)
Journal of Materials Science 45 #6 (2010)
Effect of textural characteristics of supported metallocenes on ethylene
polymerization
(1760-1768)
Journal of Materials Science 45 #6 (2010)
Epoxy resin/liquid natural rubber system: secondary phase separation and its
impact on mechanical properties
(1769-1781)
Journal of Materials Science 45 #6 (2010)
Compressive creep behavior of silane treated TiO2/high-density
polyethylene
(1796-1802)
Journal of Materials Science 45 #6 (2010)
Novel modification of bismaleimide–triazine resin by reactive hyperbranched
polysiloxane
(1859-1865)
Journal of Materials Science 45 #6 (2010)
Synthesis and characterization of novel THTPBA/PEG-derived polyurethane
scaffolds for tissue engineering
(1866-1877)
Journal of Materials Science 45 #6 (2010)
Nitroxide-mediated radical copolymerization of styrene and divinylbenzene:
increased polymerization rate by using TBEC as initiator
(1878-1884)
Journal of Materials Science 45 #6 (2010)
Dielectric properties of carbon black and carbonyl iron filled epoxy–silicone
resin coating
(1885-1888)
Journal of Materials Science 45 #6 (2010)
Mechanical properties and area retention of leather dried with biaxial
stretching under vacuum
(1889-1896)
Journal of Materials Science 45 #6 (2010)
Isosorbide based chiral polyurethanes: optical and thermal studies
(1912-1920)
Journal of Materials Science 45 #6 (2010)
The influence of molecular weight on properties of melt-processable copolyimides
derived from thioetherdiphthalic anhydride isomers
(1921-1929)
Journal of Materials Science 45 #6 (2010)
Biomimetic synthesis of needle-like nano-hydroxyapatite templated by
double-hydrophilic block copolymer
(1930-1936)
Journal of Materials Science 45 #6 (2010)
Investigation of aluminium thin layer microstructure on BOPP polymer substrate
(1937-1941)
Journal of Materials Science 45 #6 (2010)
Properties of epoxidized palm oil plasticized polytlactic acid
(1942-1946)
Journal of Materials Science 45 #6 (2010)
Synthesis of polypyrrole film by pulse galvanostatic method and its application
as supercapacitor electrode materials
(1947-1954)
Journal of Materials Science 45 #6 (2010)
Synthesis of a fullerene/expanded graphite composite and its lubricating
properties
(1955-1962)
Journal of Materials Science 45 #6 (2010)
Synthesis and electrochemical polymerization of 9,9-bis(carbazolylalkyl)fluorene
and characterization of its conducting polymer film with high tensile strength
(1963-1971)
Journal of Materials Science 45 #6 (2010)
Strain-hardening in the oscillatory shear deformation of a dedoped polyaniline
electrorheological fluid
(1972-1976)
Journal of Materials Science 45 #6 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
42.
Journal of Polymer Research
17 #2 (2010)
(Titles and Abstracts)
Thermo-hydrolytic stability of swelling capacity of superabsorbing composite
hydrogels based on AMPS and acrylamide
(151-159)
Journal of Polymer Research 17 #2 (2010)
Influence of static and dynamic crosslinking techniques on the transport
properties of ethylene propylene diene monomer rubber/poly (ethylene-co-vinyl
acetate) blends
(161-169)
Journal of Polymer Research 17 #2 (2010)
Structure and properties of AN/MAA/AM copolymer foam plastics
(171-181)
Journal of Polymer Research 17 #2 (2010)
Synthesis and micellization of an amphiphilic biodegradable
β-cyclodextrin/poly(γ-benzyl L-glutamate) copolymer
(183-190)
Journal of Polymer Research 17 #2 (2010)
Epoxy/acrylonitrile-butadiene-styrene copolymer/clay ternary nanocomposite as
impact toughened epoxy
(191-201)
Journal of Polymer Research 17 #2 (2010)
Solvent-, ion- and pH-specific swelling of poly(2-acrylamido-2-methylpropane
sulfonic acid) superabsorbing gels
(203-212)
Journal of Polymer Research 17 #2 (2010)
Maleated natural rubber prepared through mechanochemistry and its coupling
effects on natural rubber/cotton fiber composites
(213-219)
Journal of Polymer Research 17 #2 (2010)
Physical properties and biodegradation of acrylic acid grafted
poly(ε-caprolactone)/chitosan blends
(221-232)
Journal of Polymer Research 17 #2 (2010)
Synthesis and characterization of conducting polypyrrole-polymannuronate
nanocomposites
(233-239)
Journal of Polymer Research 17 #2 (2010)
Kinetics and latex particles analysis on styrene emulsion polymerization induced
by 60Co γ rays in presence of anionic polymerizable emulsifier
(241-246)
Journal of Polymer Research 17 #2 (2010)
Preparation and characterization of photopolymerizable organic–inorganic hybrid
materials by the sol-gel method
(247-254)
Journal of Polymer Research 17 #2 (2010)
Synthesis of a novel amphiphilic polymer containing nucleobases in the
self-organized nanospheres
(255-263)
Journal of Polymer Research 17 #2 (2010)
A study on the properties of PC/LCP/MWCNT with and without compatibilizers
(265-272)
Journal of Polymer Research 17 #2 (2010)
Microstructure and properties of novel ReO2 /polyimide nanocomposite
films
(273-277)
Journal of Polymer Research 17 #2 (2010)
Mechanical, thermal properties and isothermal crystallization kinetics of
biodegradable poly(butylene succinate-co-terephthalate) (PBST) fibers
(279-287)
Journal of Polymer Research 17 #2 (2010)
Iron(III) complex of an amino-functionalized poly(acrylamide)-grafted
lignocellulosic residue as a potential adsorbent for the removal of chromium(VI)
from water and industry effluents
(289-299)
Journal of Polymer Research 17 #2 (2010)
Synthesis of Salicylic Acid-Polystyrene Type Chelate Resin with a New Route
(301-308)
Journal of Polymer Research 17 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
43.
Journal of Polymer Science Part A: Polymer Chemistry 48 #6 (2010)
(Titles and Abstracts) (H)
Chemically amplified photoresists for 193-nm
photolithography: Effect of molecular structure and photonic parameters on
photopatterning
(p 1271-1277)
Journal of Polymer Science Part A: Polymer Chemistry 48 #6 (2010)
Abstract
Metal-free synthesis of responsive polymers:
Cloud point tuning by controlled 
click
reaction
(p 1278-1286)
Journal of Polymer Science Part A: Polymer Chemistry 48 #6 (2010)
Abstract
Sol-gel transition behavior of amphiphilic
comb-like poly[(PEG-b-PLGA)acrylate] block copolymers
(p 1287-1297)
Journal of Polymer Science Part A: Polymer Chemistry 48 #6 (2010)
Abstract
Synthesis and characterization of
donor-bridge-acceptor alternating copolymers containing perylene diimide units
and their application to photovoltaic cells
(p 1298-1309)
Journal of Polymer Science Part A: Polymer Chemistry 48 #6 (2010)
Abstract
Triphenylamine-based fluorescent conjugated
copolymers with pendant terpyridyl ligands as chemosensors for metal ions
(p 1310-1316)
Journal of Polymer Science Part A: Polymer Chemistry 48 #6 (2010)
Abstract
Low-CTE photosensitive polyimide based on
semialicyclic poly(amic acid) and photobase generator
(p 1317-1323)
Journal of Polymer Science Part A: Polymer Chemistry 48 #6 (2010)
Abstract
Synthesis and properties of crosslinked chiral
nanoparticles via RAFT miniemulsion polymerization
(p 1324-1331)
Journal of Polymer Science Part A: Polymer Chemistry 48 #6 (2010)
Abstract
A facile method for the preparation of
monodisperse hollow silica spheres with controlled shell thickness
(p 1332-1338)
Journal of Polymer Science Part A: Polymer Chemistry 48 #6 (2010)
Abstract
Chemical synthesis and characterization of
poly(aniline-co-ethyl 3-aminobenzoate) copolymers
(p 1339-1347)
Journal of Polymer Science Part A: Polymer Chemistry 48 #6 (2010)
Abstract
Room-temperature RAFT copolymerization of
2-chloroallyl azide with methyl acrylate and versatile applications of the azide
copolymers
(p 1348-1356)
Journal of Polymer Science Part A: Polymer Chemistry 48 #6 (2010)
Abstract
Chain-growth condensation polymerization of
4-aminobenzoic acid esters bearing tri(ethylene glycol) side chain with lithium
amide base
(p 1357-1363)
Journal of Polymer Science Part A: Polymer Chemistry 48 #6 (2010)
Abstract
ATRP of methyl methacrylate initiated with a
bifunctional initiator bearing bromomethyl functional groups: Synthesis of the
block and graft copolymers
(p 1364-1373)
Journal of Polymer Science Part A: Polymer Chemistry 48 #6 (2010)
Abstract
Phosphido-diphosphine pincer group 3 complexes as
efficient initiators for lactide polymerization
(p 1374-1382)
Journal of Polymer Science Part A: Polymer Chemistry 48 #6 (2010)
Abstract
Chirality sensing of chiral pyrrolidines and
piperazines with a liquid crystalline dynamic helical poly(phenylacetylene)
bearing ethyl phosphonate pendant groups
(p 1383-1390)
Journal of Polymer Science Part A: Polymer Chemistry 48 #6 (2010)
Abstract
Effect of pH and generation of dendron on
single-step synthesis of gold nanoparticles using PEGylated polyamidoamine
dendron in aqueous medium
(p 1391-1398)
Journal of Polymer Science Part A: Polymer Chemistry 48 #6 (2010)
Abstract
A simple methodology for the synthesis of
heterotelechelic protein-polymer-biomolecule conjugates
(p 1399-1405)
Journal of Polymer Science Part A: Polymer Chemistry 48 #6 (2010)
Abstract
Preparation and properties of
oxadiazole-containing polyacetylenes as electron transport materials
(p 1406-1414)
Journal of Polymer Science Part A: Polymer Chemistry 48 #6 (2010)
Abstract
Synthesis and self-assembly of rod-coil molecules
with n-shaped rod building block
(p 1415-1422)
Journal of Polymer Science Part A: Polymer Chemistry 48 #6 (2010)
Abstract
Synthesis and characterization of
cyclopentadithiophene-based low bandgap copolymers containing electron-deficient
benzoselenadiazole derivatives for photovoltaic devices
(p 1423-1432)
Journal of Polymer Science Part A: Polymer Chemistry 48 #6 (2010)
Abstract
Flexible nanocrystalline-titania/polyimide
hybrids with high refractive index and excellent thermal dimensional stability
(p 1433-1440)
Journal of Polymer Science Part A: Polymer Chemistry 48 #6 (2010)
Abstract
A novel type of optically active helical
polymers: Synthesis and characterization of poly(
,
-unsaturated
ketone)
(p 1441-1448)
Journal of Polymer Science Part A: Polymer Chemistry 48 #6 (2010)
Abstract
Living cationic polymerization of an azide-containing
vinyl ether toward addressable functionalization of polymers
(p 1449-1455)
Journal of Polymer Science Part A: Polymer Chemistry 48 #6 (2010)
Abstract
Synthesis and characterization of dialkoxy
substituted poly(phenylenevinylene) benzobisoxazoles
(p 1456-1460)
Journal of Polymer Science Part A: Polymer Chemistry 48 #6 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
44.
Journal of Polymer Science B: Polymer Physics 48, #6 (2010)
(Titles and Abstracts)
Cocrystallization in ternary blends of
ferroelectric copolymers
(p 621-626)
Journal of Polymer Science B: Polymer Physics 48, #6 (2010)
Abstract
Interphase development in a three-component
polymer system with asymmetric mobility
(p 627-633)
Journal of Polymer Science B: Polymer Physics 48, #6 (2010)
Abstract
Crystallinity effect on the gas transport in
semicrystalline coextruded films based on linear low density polyethylene
(p 634-642)
Journal of Polymer Science B: Polymer Physics 48, #6 (2010)
Abstract
The POSS side chain epoxy nanocomposite:
Synthesis and thermal properties
(p 643-652)
Journal of Polymer Science B: Polymer Physics 48, #6 (2010)
Abstract
Nucleation characteristics of the /
compounded nucleating agents and their influences on crystallization behavior
and mechanical properties of isotactic polypropylene
(p 653-665)
Journal of Polymer Science B: Polymer Physics 48, #6 (2010)
Abstract
Swelling kinetics of poly(aspartic
acid)/poly(acrylic acid) semi-interpenetrating polymer network hydrogels in urea
solutions
(p 666-671)
Journal of Polymer Science B: Polymer Physics 48, #6 (2010)
Abstract
Synthesis and comparative study of biodegradable
poly(alkylene sebacate)s
(p 672-686)
Journal of Polymer Science B: Polymer Physics 48, #6 (2010)
Abstract
Chain confinement in polymer nanocomposites and
its effect on polymer bulk properties
(p 687-692)
Journal of Polymer Science B: Polymer Physics 48, #6 (2010)
Abstract
Thermal degradation behaviors of epoxy resin/POSS
hybrids and phosphorus-silicon synergism of flame retardancy
(p 693-705)
Journal of Polymer Science B: Polymer Physics 48, #6 (2010)
Abstract
Miscibility enhancement and formation of
interpenetrating spherulites in ternary blends of crystalline polymers
(p 706-711)
Journal of Polymer Science B: Polymer Physics 48, #6 (2010)
Abstract
Organoclay/thermotropic liquid crystalline
polymer nanocomposites. III. Effects of fully exfoliated organoclay on
morphology, thermal, and rheological properties
(p 712-720)
Journal of Polymer Science B: Polymer Physics 48, #6 (2010)
Abstract
Strain energy function of swollen polybutadiene
elastomers studied by general biaxial strain testing
(p 721-728)
Journal of Polymer Science B: Polymer Physics 48, #6 (2010)
Abstract
Influence of matrix glass transition temperature
on the memory effect of polymer-dispersed liquid crystals
(p 729-732)
Journal of Polymer Science B: Polymer Physics 48, #6 (2010)
Abstract
Influence of interaction between poly(methyl
methacrylate) and clay on the properties of nanocomposites prepared by a
heterocoagulation method
(p 733-738)
Journal of Polymer Science B: Polymer Physics 48, #6 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
45.
Journal of
Reinforced Plastics and Composites 29 #1 (2010)
(Titles and Abstracts)
0545
Evaluation of the Physical and Mechanical Properties of
Medium Density Fiberboard Made from Old Newsprint Fibers
(5-11)
Journal of Reinforced Plastics and Composites 29 #1 (2010)
[Abstract]
Mechanical Performance of Short Banana/Sisal Hybrid
Fiber Reinforced Polyester Composites
(12-29)
Journal of Reinforced Plastics and Composites 29 #1 (2010)
[Abstract]
Characterization of Mechanical Behavior of Metallic and
Non-metallic Particulate Filled Epoxy Matrix Composites
(30-42)
Journal of Reinforced Plastics and Composites 29 #1 (2010)
[Abstract]
Studies on Bamboo/Glass Fiber Reinforced USP and VE
Resin
(43-51)
Journal of Reinforced Plastics and Composites 29 #1 (2010)
[Abstract]
Preparation and Physico-Chemical Study of Glass—Sisal
(Treated—Untreated) Hybrid Composites of Bisphenol-C based Mixed Epoxy—Phenolic
Resins
(52-59)
Journal of Reinforced Plastics and Composites 29 #1 (2010)
[Abstract]
Comparison of Reinforcing Efficiency between Recycled
Newspaper (RNP)/Carbon Black (CB) and Recycled Newspaper (RNP)/Silica Hybrid
Filled Polypropylene (PP)/Natural Rubber (NR) Composites
(60-75)
Journal of Reinforced Plastics and Composites 29 #1 (2010)
[Abstract]
Computational Modeling and Numerical Simulation of
Flow-Induced Crystallization Kinetics During Injection Molding of Polyethylene
Terephthalate
(76-85)
Journal of Reinforced Plastics and Composites 29 #1 (2010)
[Abstract]
Effect of Knitting Tightness on Mechanical Properties
of Weft-knit Glass Fiber Reinforced Epoxy Composites
(86-93)
Journal of Reinforced Plastics and Composites 29 #1 (2010)
[Abstract]
Geometrical Correction to the Elastic Stiffness of
Particulate Composites
(94-104)
Journal of Reinforced Plastics and Composites 29 #1 (2010)
[Abstract]
Curing Characteristics and Mechanical Properties of
Hybrid Palm Ash/Silica/Natural Rubber Composites
(105-111)
Journal of Reinforced Plastics and Composites 29 #1 (2010)
[Abstract]
Fabrication Effects on Properties of Composites for
Medical Applications: 1. Composite Preparation and Characterization
(112-122)
Journal of Reinforced Plastics and Composites 29 #1 (2010)
[Abstract]
Effect of MAPE on Mechanical and Morphological
Properties of Wheat Straw/HDPE Injection Molded Composites
(123-131)
Journal of Reinforced Plastics and Composites 29 #1 (2010)
[Abstract]
Evaluation of Time Dependent Behavior of a Wood
Flour/High Density Polyethylene Composite
(132-143)
Journal of Reinforced Plastics and Composites 29 #1 (2010)
[Abstract]
Studies on Aluminum — Fly-Ash Composite Produced by
Impeller Mixing
(144-148)
Journal of Reinforced Plastics and Composites 29 #1 (2010)
[Abstract]
Surface Grafting of Polyethylene Fiber for Improved
Adhesion to Acrylic Resin
(149-158)
Journal of Reinforced Plastics and Composites 29 #1 (2010)
[Abstract]
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
46.
Journal of
Thermoplastic Composite Materials 23 #1 (2010)
(Titles and Abstracts)
Machinability Evaluation in Unreinforced and Reinforced
PEEK Composites using Response Surface Models
(5-18)
Journal of Thermoplastic Composite Materials 23 #1 (2010)
[Abstract]
Effects of Water on the Properties of Thermoplastic
Starch Poly(lactic acid) Blend Containing Citric Acid
(19-34)
Journal of Thermoplastic Composite Materials 23 #1 (2010)
[Abstract]
Elastic Flexural Stresses in an Adhesively Bonded
Functionally Graded Double Containment Cantilever Joint
(35-56)
Journal of Thermoplastic Composite Materials 23 #1 (2010)
[Abstract]
Stochastic Free Vibration of Laminated Composite Plates
in Thermal Environments
(57-77)
Journal of Thermoplastic Composite Materials 23 #1 (2010)
[Abstract]
Morphology, X-ray Diffraction and Mechanical Properties
of Resol-montmorillonite Clay Composites
(79-97)
Journal of Thermoplastic Composite Materials 23 #1 (2010)
[Abstract]
Carbon Fibers/Polyamide 6 Composites Based on Hybrid
Yarns
(99-110)
Journal of Thermoplastic Composite Materials 23 #1 (2010)[Abstract]
Theoretical Investigation on Thermo-mechanical Stresses
in Laminated Cylindrical Panels
(111-136)
Journal of Thermoplastic Composite Materials 23 #1 (2010)
[Abstract]
Effect of Environmental Temperature on Ultraviolet
Irradiated PP and its Composite
(137-148)
Journal of Thermoplastic Composite Materials 23 #1 (2010)
[Abstract]
Effect of Light Intensity on Ultraviolet Irradiated
Polypropylene and its Compatibilization with CaCO3
(149-159)
Journal of Thermoplastic Composite Materials 23 #1 (2010)
[Abstract]
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
47.
Macromolecular Chemistry and Physics 211 #3 (2010)
(Titles and Abstracts)
0155 0233 0547
In situ Synthesis of Polymer/Clay Nanocomposites
by Living and Controlled/Living Polymerization
(p 279-285)
Macromolecular Chemistry and Physics 211 #3 (2010)
Abstract
Surface Interpenetrating Networks of
Poly(ethylene terephthalate) and Polyamides for Effective Biocidal Properties
(p 286-296)
Macromolecular Chemistry and Physics 211 #3 (2010)
Abstract
Janus Micelle Formation Induced by
Protonation/Deprotonation of Poly(2-vinylpyridine)-block-Poly(ethylene
oxide) Diblock Copolymers
(p 297-302)
Macromolecular Chemistry and Physics 211 #3 (2010)
Abstract
Photocontrolled Living Anionic Polymerization of
Silicon-Bridged [1]Ferrocenophanes with Fluorinated Substituents: Synthesis and
Characterization of Fluorinated Polyferrocenylsilane (PFS) Homopolymers and
Block Copolymers
(p 303-312)
Macromolecular Chemistry and Physics 211 #3 (2010)
Abstract
Phase Separation in Poly(9,9-dioctylfluorene)/Poly(methyl
methacrylate) Blends
(p 313-320)
Macromolecular Chemistry and Physics 211 #3 (2010)
Abstract
Morphology Development and Interfacial
Interactions in Polycaprolactone/Thermoplastic-Starch Blends
(p 321-333)
Macromolecular Chemistry and Physics 211 #3 (2010)
Abstract
Thermoplastic Vulcanizates Based on Highly
Compatible Blends of Isotactic Poly(propylene) and Copolymers of Atactic
Poly(propylene) and 5-Ethylidene-2-norbornene
(p 334-344)
Macromolecular Chemistry and Physics 211 #3 (2010)
Abstract
Synthesis and Electro-Optical Properties of a
Novel DNA-Lipid Complex Carrying Carbazole Moieties
(p 345-352)
Macromolecular Chemistry and Physics 211 #3 (2010)
Abstract
Liquid Crystal Alignment Properties of
Poly-(3-thiopheneacetate)/Dialkyldimethylammonium Complexes
(p 353-358)
Macromolecular Chemistry and Physics 211 #3 (2010)
Abstract
A New Synthetic Approach to
Thiophene-Nickel(II)porphyrin Hybrid Molecules and their Electrochemical and
Computational Investigation
(p 359-371)
Macromolecular Chemistry and Physics 211 #3 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
48.
Macromolecular Rapid Communications 31 #3 (2010)
(Titles and Abstracts)
Recent Developments Concerning the Dispersion of
Carbon Nanotubes in Polymers
(p 247-257)
Macromolecular Rapid Communications 31 #3 (2010)
Abstract
Hetero-Multifunctional Poly(ethylene glycol)
Copolymers with Multiple Hydroxyl Groups and a Single Terminal Functionality
(p 258-264)
Macromolecular Rapid Communications 31 #3 (2010)
Abstract
Liquid Crystalline Period Variations in
Self-Assembled Block Copolypeptides-Surfactant Ionic Complexes
(p 265-269)
Macromolecular Rapid Communications 31 #3 (2010)
Abstract
Fabrication of Patterned Polydiacetylene
Composite Films Using a Replica-Molding (REM) Technique
(p 270-274)
Macromolecular Rapid Communications 31 #3 (2010)
Abstract
Iron-Mediated ICAR ATRP of Styrene and Methyl
Methacrylate in the Absence of Thermal Radical Initiator
(p 275-280)
Macromolecular Rapid Communications 31 #3 (2010)
Abstract
Polymer Brushes via Controlled, Surface-Initiated
Atom Transfer Radical Polymerization (ATRP) from Graphene Oxide
(p 281-288)
Macromolecular Rapid Communications 31 #3 (2010)
Abstract
Controlling the Photoluminescence from a Laser
Dye through the Oxidation Level of Polypyrrole
(p 289-294)
Macromolecular Rapid Communications 31 #3 (2010)
Abstract
Viscoelastic Behavior and Force Nature of
Thermo-Reversible Epoxy Dry Adhesives
(p 295-299)
Macromolecular Rapid Communications 31 #3 (2010)
Abstract
Tailoring Polymeric Hydrogels through
Cyclodextrin Host-Guest Complexation
(p 300-304)
Macromolecular Rapid Communications 31 #3 (2010)
Abstract
1,1-Diphenyl Ethylene-Mediated Radical
Polymerisation: A General Non-Metal-Based Technique For The Synthesis Of Precise
Core Cross-Linked Star Polymers
(p 305-309)
Macromolecular Rapid Communications 31 #3 (2010)
Abstrac
Observations on Solution Crystallization of
Poly(vinyl alcohol) in the Presence of Single-Wall Carbon Nanotubes
(p 310-316)
Macromolecular Rapid Communications 31 #3 (2010)
Abstract
Cross-Linked Multilayers of Poly(vinyl amine) as
a Single Component and Their Interaction with Proteins
(p 317-322)
Macromolecular Rapid Communications 31 #3 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
49.
Macromolecular Theory and Simulations 19 #1 (2010)
(Titles and Abstracts)
Nitroxide-Mediated Radical Polymerization in
Dispersed Systems: Compartmentalization and Nitroxide Partitioning
(p 11-23)
Macromolecular Theory and Simulations 19 #1 (2010)
Abstract
Kinetic Simulations of Reversible Chain Transfer
Catalyzed Polymerization (RTCP): Guidelines to Optimum Molecular Weight Control
(p 24-35)
Macromolecular Theory and Simulations 19 #1 (2010)
Abstract
Polymer Incompatibility Caused by Different
Molecular Architectures: Modeling via Chain Connectivity and Conformational
Relaxation
(p 36-43)
Macromolecular Theory and Simulations 19 #1 (2010)
Abstract
Development of Entanglements in a Fully
Disentangled Polymer Melt
(p 44-56)
Macromolecular Theory and Simulations 19 #1 (2010)
Abstract
Numerical Simulations of the Effect of
Microstructure on AC Conductivity of MWCNT/Polymer Nanocomposites
(p 57-63)
Macromolecular Theory and Simulations 19 #1 (2010)
Abstract
Investigation of Thermal Expansion of
Polyimide/SiO2 Nanocomposites
by Molecular Dynamics Simulations
(p 64-73)
Macromolecular Theory and Simulations 19 #1 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
50.
Macromolecules 43 #3 (2010)
(Titles and Abstracts)
Nanoreactors for Polymerizations and Organic Reactions
(1159–1168)
Macromolecules 43 #3 (2010)
Understanding the Influence of Morphology on Poly(3-hexylselenothiophene):PCBM
Solar Cells
(1169–1174)
Macromolecules 43 #3 (2010)
Redox-Induced Reversible Conformational Switching of Poly(aniline sulfonic acid)
with Transition Metals in Aqueous Solution
(1175–1177)
Macromolecules 43 #3 (2010)
Polymerization of Diethyl Vinylphosphonate Mediated by Rare-Earth Tris(amide)
Compounds
(1178–1181)
Macromolecules 43 #3 (2010)
Synthesis of Hetero-Grafted Amphiphilic Diblock Molecular Brushes and Their
Self-Assembly in Aqueous Medium
(1182–1184)
Macromolecules 43 #3 (2010)
A Highly Reactive Benzoxazine Monomer, 1-(2-Hydroxyethyl)-1,3-Benzoxazine:
Activation of Benzoxazine by Neighboring Group Participation of Hydroxyl Group
(1185–1187)
Macromolecules 43 #3 (2010)
SiO2/Polymer Hybrid Hollow Microspheres via Double in Situ Miniemulsion
Polymerization
(1188–1190)
Macromolecules 43 #3 (2010)
Covalent Cross-Linked Polymer Gels with Reversible Sol−Gel Transition and
Self-Healing Properties
(1191–1194)
Macromolecules 43 #3 (2010)
Semiperfluoroalkyl Polyfluorenes for Orthogonal Processing in Fluorous Solvents
(1195–1198)
Macromolecules 43 #3 (2010)
Blends of PS-PMMA Diblock Copolymers with a Directionally Hydrogen Bonding
Polymer Additive
(1199–1202)
Macromolecules 43 #3 (2010)
Surface-Initiated Polymerization of 5-(Perfluoro-n-alkyl)norbornenes from Gold
Substrates
(1203–1209)
Macromolecules 43 #3 (2010)
Effect of PAMAM Dendrimers on *Ru(bpy)32+ Emission Quenching by Ferrocyanide and
on ANS Fluorescence: Quantitative Binding Parameters as a Function of Dendrimer
Size, pH, and Buffer Composition
(1218–1226)
Macromolecules 43 #3 (2010)
Synthesis, Characterization, and Properties of Starlike Poly(n-butyl
acrylate)-b-poly(methyl methacrylate) Block Copolymers
(1227–1235)
Macromolecules 43 #3 (2010)
High Performance Volatile Polymeric Memory Devices Based on Novel
Triphenylamine-based Polyimides Containing Mono- or Dual-Mediated Phenoxy
Linkages
(1236–1244)
Macromolecules 43 #3 (2010)
Synthesis and Assembly Behavior of Heteronucleobase-Functionalized
Poly(ε-caprolactone)
(1245–1252)
Macromolecules 43 #3 (2010)
Photovoltaic Performance of Polymers Based on Dithienylthienopyrazines Bearing
Thermocleavable Benzoate Esters
(1253–1260)
Macromolecules 43 #3 (2010)
Anthracene Based Conjugated Polymers: Correlation between π−π-Stacking Ability,
Photophysical Properties, Charge Carrier Mobility, and Photovoltaic Performance
(1261–1269)
Macromolecules 43 #3 (2010)
Thermally Reversible Dendronized Step-Polymers Based on Sequential Huisgen
1,3-Dipolar Cycloaddition and Diels−Alder “Click” Reactions
(1270–1276)
Macromolecules 43 #3 (2010)
Novel Supramolecular Side-Chain Banana-Shaped Liquid Crystalline Polymers
Containing Covalent- and Hydrogen-Bonded Bent Cores
(1277–1288)
Macromolecules 43 #3 (2010)
Proline-Based Block Copolymers Displaying Upper and Lower Critical Solution
Temperatures
(1289–1298)
Macromolecules 43 #3 (2010)
Reinforcing the Hydrophobicity of Polymeric Surfaces from Fluorinated Star
Polymers and Nanogels
(1299–1308)
Macromolecules 43 #3 (2010)
Stabilization of Amino Acid Derived Diblock Copolymer Micelles through Favorable
d:l side chain interactions
(1309–1318)
Macromolecules 43 #3 (2010)
Synthesis and Optical/Thermal Behavior of New Azo Photoisomerizable Discotic
Liquid Crystals
(1319–1328)
Macromolecules 43 #3 (2010)
Primary Hydroxy-Terminated Polyisobutylene via End-Quenching with a Protected
N-(ω-Hydroxyalkyl)pyrrole
(1329–1340)
Macromolecules 43 #3 (2010)
Synthesis of Novel Polymer/Urea Peptoid Conjugates Using RAFT Polymerization
(1341–1348)
Macromolecules 43 #3 (2010)
Facile Synthesis of 3,8-Dibromo-Substituted Phenanthridine Derivatives and Their
Conjugated Polymers
(1349–1355)
Macromolecules 43 #3 (2010)
Morphology of Three-Phase PS/PBA Composite Latex Particles Containing in Situ
Produced Block Copolymers
(1356–1363)
Macromolecules 43 #3 (2010)
Green Chemistry: Sunlight-Induced Cationic Polymerization of Renewable Epoxy
Monomers Under Air
(1364–1370)
Macromolecules 43 #3 (2010)
Alginate−Poly(ethylene glycol) Hybrid Microspheres with Adjustable Physical
Properties
(1371–1378)
Macromolecules 43 #3 (2010)
Single Chain White-Light-Emitting Polyfluorene Copolymers Containing Iridium
Complex Coordinated on the Main Chain
(1379–1386)
Macromolecules 43 #3 (2010)
Compartmentalization in Atom Transfer Radical Polymerization to High Conversion
in Dispersed Systems: Effects of Diffusion-Controlled Reactions
(1387–1395)
Macromolecules 43 #3 (2010)
Highly Active, Bifunctional Co(III)-Salen Catalyst for Alternating
Copolymerization of CO2 with Cyclohexene Oxide and Terpolymerization with
Aliphatic Epoxides
(1396–1402)
Macromolecules 43 #3 (2010)
Synthesis of Well-Defined (AB)n Multiblock Copolymers Composed of Polystyrene
and Poly(methyl methacrylate) Segments Using Specially Designed Living AB
Diblock Copolymer Anion
(1403–1410)
Macromolecules 43 #3 (2010)
Well-Defined Polymers from Biosourced Monomers: The Case of
2-(Methacryloyloxy)ethyl Tiglate
(1411–1415)
Macromolecules 43 #3 (2010)
2-Phosphinophenolate Nickel Catalysts: Formation of Ethylene Copolymers with
Isolated sec-Alkyl, Aryl, and Functionally Substituted Alkyl Groups
(1416–1424)
Macromolecules 43 #3 (2010)
Photopatterning of Poly(arylene dienylene) by the Photoacid-Catalyzed
Deprotection−Elimination Reaction of a Precursor Polymer
(1425–1429)
Macromolecules 43 #3 (2010)
Toward Controlling Folding in Synthetic Polymers: Fabricating and Characterizing
Supramolecular Single-Chain Nanoparticles
(1430–1437)
Macromolecules 43 #3 (2010)
Highly Branched and Hyperbranched Glycopolymers via Reversible
Addition−Fragmentation Chain Transfer Polymerization and Click Chemistry
(1438–1443)
Macromolecules 43 #3 (2010)
Critical Comparison of Volume Data Obtained by Different Electron Tomography
Techniques
(1444–1448)
Macromolecules 43 #3 (2010)
Structure and Morphology of Syndiotactic Poly(propene-co-1-butene)s with
1-Butene as a Rich Component
(1449–1454)
Macromolecules 43 #3 (2010)
Channel Clathrate of Syndiotactic Polystyrene with p-nitroaniline
(1455–1466)
Macromolecules 43 #3 (2010)
Aggregation of Carbon Nanotubes in Semidilute Suspension
(1467–1472)
Macromolecules 43 #3 (2010)
Basis of Solubility versus TC Correlations in Polymeric Gas Separation Membranes
(1473–1479)
Macromolecules 43 #3 (2010)
Retarded Crystallization in Polyamide/Layered Silicates Nanocomposites caused by
an Immobilized Interphase
(1480–1487)
Macromolecules 43 #3 (2010)
Strain-Induced Molecular Ordering in Polylactide upon Uniaxial Stretching
(1488–1498)
Macromolecules 43 #3 (2010)
Biodegradable Poly(l-lactide)/Polyhedral Oligomeric Silsesquioxanes
Nanocomposites: Enhanced Crystallization, Mechanical Properties, and Hydrolytic
Degradation
(1499–1506)
Macromolecules 43 #3 (2010)
Self-Assembly and Hierarchies in Pyridine-Containing Homopolymers and Block
Copolymers with Hydrogen-Bonded Cholesteric Side-Chains
(1507–1514)
Macromolecules 43 #3 (2010)
Dynamic Signatures of Microphase Separation in a Block Copolymer Melt Determined
by X-ray Photon Correlation Spectroscopy and Rheology
(1515–1523)
Macromolecules 43 #3 (2010)
Phase Behavior of Thin Film Brush-Coated Nanoparticles/Homopolymer Mixtures
(1524–1529)
Macromolecules 43 #3 (2010)
Evidence of Strain Hardening in DNA Gels
(1530–1538)
Macromolecules 43 #3 (2010)
Chain Deformation in Entangled Polymer Melts at Re-entrant Corners
(1539–1542)
Macromolecules 43 #3 (2010)
Dynamic Force Spectroscopy of Oppositely Charged Polyelectrolyte Brushes
(1543–1550)
Macromolecules 43 #3 (2010)
Nondestructive Probing of Mechanical Anisotropy in Polyimide Films on Nanoscale
(1551–1555)
Macromolecules 43 #3 (2010)
Nonuniformity in Cross-Linked Natural Rubber as Revealed by Contrast-Variation
Small-Angle Neutron Scattering
(1556–1563)
Macromolecules 43 #3 (2010)
Conformational Transitions of Spherical Polymer Brushes: Synthesis,
Characterization, and Theory
(1564–1570)
Macromolecules 43 #3 (2010)
Pressure Effects on Polymer Coil−Globule Transitions near an LCST
(1571–1574)
Macromolecules 43 #3 (2010)
Complexation of a Linear Polyelectrolyte with a Charged Dendrimer:
Polyelectrolyte Stiffness Effects
(1575–1582)
Macromolecules 43 #3 (2010)
Mesoscale Molecular Dynamics Simulations of the Force between Surfaces with
Grafted Poly(ethylene oxide) Chains Derived from Atomistic Simulations
(1583–1591)
Macromolecules 43 #3 (2010)
Characteristic Length Scales and Radial Monomer Density Profiles of Molecular
Bottle-Brushes: Simulation and Experiment
(1592–1601)
Macromolecules 43 #3 (2010)
Hierarchically Ordered Microstructures Self-Assembled from A(BC)n Multiblock
Copolymers
(1602–1609)
Macromolecules 43 #3 (2010)
Branched Polymers under Shear
(1610–1620)
Macromolecules 43 #3 (2010)
Distance Dependence of Angular Correlations in Dense Polymer Solutions
(1621–1628)
Macromolecules 43 #3 (2010)
A Quantitative Theory of Mechanical Unfolding of a Homopolymer Globule
(1629–1643)
Macromolecules 43 #3 (2010)
Ordering Dynamics of Directed Self-Assembly of Block Copolymers in Periodic
Two-Dimensional Fields
(1644–1650)
Macromolecules 43 #3 (2010)
A Theoretical Study of the Separation Principle in Size Exclusion Chromatography
(1651–1659)
Macromolecules 43 #3 (2010)
Acyclic Guanidines as Organic Catalysts for Living Polymerization of Lactide
(1660–1664)
Macromolecules 43 #3 (2010)
Bending of Lamellar Microdomains of Block Copolymers on Nonselective Surfaces
(1665–1670)
Macromolecules 43 #3 (2010)
Architectural Effect on the Surface Tension of an ABA Triblock Copolymer Melt
(1671–1674)
Macromolecules 43 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
51.
Modern Plastics (2010)
(Titles and Abstracts)
Weekly
Trade
Magazine
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
52.
Plastics Technology (February 2010)
(Titles, Abstracts and Articles)
Trade
Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
53.
Polymer 51 #3 (2010)
(Titles and Abstracts) (H)
Separation of parent homopolymers from diblock
copolymers by liquid chromatography under limiting conditions of desorption 3.
Role of column packing
(587-596)
Polymer 51 #3 (2010)
Chain walking copolymerization of ethylene with
cyclopentene – Effect of ring incorporation on polymer chain topology
(597-605)
Polymer 51 #3 (2010)
Miniemulsion polymers as solid support for
transition metal catalysts
(606-615)
Polymer 51 #3 (2010)
Synthesis of charge transporting block
copolymers containing 2,7-dimethoxycarbazole units for light emitting device
(616-622)
Polymer 51 #3 (2010)
Synthesis and properties of sulfonated copoly(p-phenylene)s
containing aliphatic alkyl pendant for fuel cell applications
(623-631)
Polymer 51 #3 (2010)
Synthesis and characterization of low-birefringent
crosslinkable fluorinated poly(arylene ether sulfide)s containing pendant phenyl
moiety
(632-638)
Polymer 51 #3 (2010)
Synthesis and characterization of in situ
cross-linked hydrogel based on self-assembly of thiol-modified chitosan with PEG
diacrylate using Michael type addition
(639-646)
Polymer 51 #3 (2010)
Phase separation in polymer blend thin films
studied by differential AC chip calorimetry
(647-654)
Polymer 51 #3 (2010)
Synthesis and processing of PMMA carbon
nanotube nanocomposite foams
(655-664)
Polymer 51 #3 (2010)
Effects of charge density on the recognition
properties of molecularly imprinted polyampholyte hydrogels
(665-670)
Polymer 51 #3 (2010)
Steady state analysis of water vapor transport
in ionomers
(671-678)
Polymer 51 #3 (2010)
The effect of cluster plasticisation on the
self healing behaviour of ionomers
(679-686)
Polymer 51 #3 (2010)
Role of boric acid in the formation of
poly(vinyl alcohol)–iodine complexes in undrawn films
( 687-693)
Polymer 51 #3 (2010)
Hyperbranched fluorinated polyimides with
tunable refractive indices for optical waveguide applications
(694-701)
Polymer 51 #3 (2010)
The vesicle formation in a binary amphiphilic
diblock copolymer/homopolymer solution
(702-708)
Polymer 51 #3 (2010)
Polyurethane–POSS hybrids: Molecular dynamics
studies
(709-718)
Polymer 51 #3 (2010)
A quantitative method for measuring
nanocomposite dispersion
(719-729)
Polymer 51 #3 (2010)
Morphology, rheology and crystallization
behavior of polylactide composites prepared through addition of five-armed star
polylactide grafted multiwalled carbon nanotubes
(730-737)
Polymer 51 #3 (2010)
Effects of chain conformation on miscibility,
morphology, and mechanical properties of solution blended substituted
polyphenylene and polyphenylsulfone
(738-747)
Polymer 51 #3 (2010)
The effect of matrix morphology on
nanocomposite properties
(748-754)
Polymer 51 #3 (2010)
Thermomechanical characterization of a shape
memory polymer based self-repairing syntactic foam
(755-762)
Polymer 51 #3 (2010)
Formation of silicone elastomer networks films
with gradients in modulus
(763-773)
Polymer 51 #3 (2010)
Hierarchical structure of injection-molded bars
of HDPE/MWCNTs composites with novel nanohybrid shish–kebab
(774-782)
Polymer 51 #3 (2010)
Comparative study on development of structural
hierarchy in constrained annealed simultaneous and sequential biaxially
stretched polylactic acid films
(783-792)
Polymer 51 #3 (2010)
Shape memory behavior of poly(methyl
methacrylate)-graft-poly(ethylene glycol) copolymers
(793-798)
Polymer 51 #3 (2010)
Formation of phase structure and
crystallization behavior from disordered melt for ethylene-isoprene block
copolymers and their blends
(799-806)
Polymer 51 #3 (2010)
Crystallization kinetics and crystalline
structure of biodegradable Poly(ethylene adipate)
(807-815)
Polymer 51 #3 (2010)
Mapping the real micro/nanostructures for the
prediction of elastic moduli of polypropylene/clay nanocomposites
(816-824)
Polymer 51 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
54.
Polymer Bulletin 64 #4 (2010)
(Titles
and Abstracts)
Synthesis and thermal behavior of telechelic poly(butadiene)diols with
azobenzene-based liquid-crystalline units in side chains
(315-326)
Polymer Bulletin 64 #4 (2010)
Branched methyl methacrylate copolymer particles prepared by RAFT dispersion
polymerization
(327-339)
Polymer Bulletin 64 #4 (2010)
Preparation of cellulose-based ionic porous material compatibilized with
polymeric ionic liquid
(341-349)
Polymer Bulletin 64 #4 (2010)
Synthesis of cross-linked graft copolymer from [2-(methacryloyloxy)ethyl]
trimethylammonium chloride and poly(vinyl alcohol) for removing chromium(VI)
from aqueous solution
(351-362)
Polymer Bulletin 64 #4 (2010)
Uranyl ions uptake on poly(AAc/AAm)-cl-N,N-MBAAm hydrogel
(363-374)
Polymer Bulletin 64 #4 (2010)
Preparation and characterization of crosslinked poly(methylmethacrylate) heat
sensitive color-developing nanocapsules
(375-386)
Polymer Bulletin 64 #4 (2010)
The effect of mineral surface nature on the mechanical properties of
mineral-filled polypropylene composites
(387-399)
Polymer Bulletin 64 #4 (2010)
Synthesis and characterization of biocompatible poly(ethylene
glycol)-functionalized polyurethane using click chemistry
(401-411)
Polymer Bulletin 64 #4 (2010)
Poly (vinyl alcohol)-assisted solvothermal growth of CdS dumbbells and necklaces
(413-419)
Polymer Bulletin 64 #4 (2010)
***************************************************
Polymer Bulletin 64 #5 (2010)
(Titles
and Abstracts)
Polydimethyldiphenylsiloxanes/silica interconnected networks: preparation and
properties evaluation
(421-434)
Polymer Bulletin 64 #5 (2010)
Effect of metal triflates on direct polycondensation of lactic acid
(435-443)
Polymer Bulletin 64 #5 (2010)
Effect of dealcoholation of support in MgCl2-supported Ziegler–Natta
catalysts on catalyst activity and polypropylene powder morphology
(445-457)
Polymer Bulletin 64 #5 (2010)
Preparation and characterization of the poly(2-hydroxyethyl methacrylate)–salicylic
acid conjugate
(459-469)
Polymer Bulletin 64 #5 (2010)
Crystallization, hydrolytic degradation, and mechanical properties of poly (trimethylene
terephthalate)/poly(lactic acid) blends
(471-481)
Polymer Bulletin 64 #5 (2010)
Deformation of dispersed PA66 phase in drawn PA66/SAN blend
(483-495)
Polymer Bulletin 64 #5 (2010)
Dynamic mechanical, thermal, and morphological study of ABS/textile fiber
composites
(497-510)
Polymer Bulletin 64 #5 (2010)
Synthesis of nanocolorants with crosslinked shell by miniemulsion polymerization
stabilized by waterborne polyurethane
(511-521)
Polymer Bulletin 64 #5 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
55.
Polymer Journal 42 #2 (2010)
(Titles and Abstracts)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
56.
Polymer Science: Series A 52 #1 (2010)
(Titles and Abstracts)
Viscosity and Temperature Transitions in Dimethylacetamide Solutions
of Polyamidobenzimidazole and Its Blends with Polysulfone
(1)
Polymer Science: Series A 52 #1 (2010)
abstract
Hydrodynamic, Optical, and Electrooptical Properties of Macromolecules
of Third-Generation Cylindrical Dendrimers in Chloroform and Dichloroacetic
Acid
(8)
Polymer Science: Series A 52 #1 (2010)
abstract
Studies on Syntheses and Dynamic Swelling of pH-Sensitive Macroporous
Poly(N-isopropylacrylamide-co-acrylic acid) Hydrogels
(19)
Polymer Science: Series A 52 #1 (2010)
abstract
EPR Study of Charge Transfer in the Poly-3-Dodecylthiophene-Fullerene
System
(26)
Polymer Science: Series A 52 #1 (2010)
|abstract
Luminescence of Terbium and Europium Ions in Metal-Polymer
Complexes Based on Poly(amido acids) with Main-Chain Arylcarboxyamide Groups
(34)
Polymer Science: Series A 52 #1 (2010)
abstract
Structure and Appearance of Residual Polarization in Thin Films
of Polyvinylidene Fluoride Prepared via the Langmuir–Blodgett Method
(40)
Polymer Science: Series A 52 #1 (2010)
abstract
Optical Properties and Orientational Order of Deoxyribonucleic Acid
Molecules at Interfaces
(49)
Polymer Science: Series A 52 #1 (2010)
abstract
Effect of Hydroquinone on the Electrical Properties of
Dodecylbenzene Sulfonic Acid Doped Polypyrrole/Aluminum
(55)
Polymer Science: Series A 52 #1 (2010)
abstract
Rheology of Liquid-Crystalline Solutions of Hydroxylpropyl Cellulose
Filled
with Layered Silicate Particles
(60)
Polymer Science: Series A 52 #1 (2010)
abstract
Why Does the Rouse Model Fairly Describe the Dynamic Characteristics
of Polymer Melts at Molecular Masses below Critical Mass?
(72)
Polymer Science: Series A 52 #1 (2010)
abstract
Theory of Relaxation Spectra for Two Identical Interpenetrating Polymer
Networks
(82 )
Polymer Science: Series A 52 #1 (2010)
abstract
Mesoscopic Simulation of the Self-Organization
of a Binary Mixture of Copolymers in the Vicinity of a Selective Adsorbing
Surface
(94)
Polymer Science: Series A 52 #1 (2010)
abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
57.
Polymer Science: Series B 51 #11-12 (2009)
(Titles and Abstracts)
Heterogenization of Tin-Containing Polymer Catalysts as a Method
of Increasing Their Activity in the Urethane-Formation Reaction
(423)
Polymer Science: Series B 51 #11-12 (2009)
abstract
Inhibition of Polymerization of Methyl Methacrylate by an
ortho-Benzoquinone–Amine System
(427)
Polymer Science: Series B 51 #11-12 (2009)
abstract
Kinetics of Copolymerization of Methyl Methacrylate and Divinyl Sulfide
in the Presence of Initiating Systems
(438)
Polymer Science: Series B 51 #11-12 (2009)
abstract
Polymerization of Ethylene in the Presence of Novel Single-Site Titanium
Phenolate Catalytic Systems
(444)
Polymer Science: Series B 51 #11-12 (2009)
abstract
Copolymerization of Vinyl Chloride with 1-(Vinyloxyalkoxy)propylene
Oxides-2,3:
Solvophobic Effects of Solvents
(452)
Polymer Science: Series B 51 #11-12 (2009)
abstract
Hydrolytic Polycondensation of Sodiumoxymethyl(dialkoxy)silanes
as a Method for Producing Linear Poly[(sodiumoxy)methylsilsesquioxane]
(457)
Polymer Science: Series B 51 #11-12 (2009)
abstract
New Poly(arylene ethers) Containing Side Sulfo Groups
(465)
Polymer Science: Series B 51 #11-12 (2009)
abstract
New Electrochromic Polymeric Pyridinium Salts
(471)
Polymer Science: Series B 51 #11-12 (2009)
abstract
Synthesis of Polyglutamine Conjugates of Lysine Dendrimers in Solution
and Polymer Gel
(483)
Polymer Science: Series B 51 #11-12 (2009)
Synthesis of Organic–Inorganic Polymer Structures via the Interaction
of Orthoboric Acid with m-Phenylene-Bismaleimide
(492)
Polymer Science: Series B 51 #11-12 (2009)
abstract
Bromination of Butyl Rubber with a Sodium Bromide–tert-Butyl
Hypochlorite System
(497)
Polymer Science: Series B 51 #11-12 (2009)
abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
58.
Progress in Polymer Science 35 #3 (2010)
(Titles and Abstracts)
Chemical modification of poly(vinyl
chloride)—Still on the run
(303-331)
Progress in Polymer Science 35 #3 (2010)
Some hydrogels having novel molecular
structures
(332-337)
Progress in Polymer Science 35 #3 (2010)
Poly(lactic acid) modifications
(338-356)
Progress in Polymer Science 35 #3 (2010)
Carbon nanotube–polymer composites: Chemistry,
processing, mechanical and electrical properties
(357-401)
Progress in Polymer Science 35 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
59. Reactive and Functional Polymers 70 #3 (2010)
(Titles
and Abstracts)
Thermosensitive copolymer with cobalt
phthalocyanine and catalytic behavior based on adjustable LCST
(135-141)
Reactive and Functional Polymers 70 #3 (2010)
Kinetic evaluation of phenol/aniline mixtures
adsorption from aqueous solutions onto activated carbon and hypercrosslinked
polymeric resin (MN200)
(142-150)
Reactive and Functional Polymers 70 #3 (2010)
Correlations between microstructural
characterization and thermal properties of well defined poly(ε-caprolactone)
samples by ring opening polymerization with neutral and cationic
bis(2,4,6-triisopropylphenyl)tin(IV) compounds
(151-158)
Reactive and Functional Polymers 70 #3 (2010)
A pH-, thermo-, and glucose-, triple-responsive
hydrogels: Synthesis and controlled drug delivery
(159-167)
Reactive and Functional Polymers 70 #3 (2010)
Silver nanoparticles in polyvinylpyrrolidone
grafted natural rubber
(168-174)
Reactive and Functional Polymers 70 #3 (2010)
Syntheses and self-assembly of novel
polyurethane–itaconic acid copolymer hydrogels
(175-181)
Reactive and Functional Polymers 70 #3 (2010)
Synthesis and characterization of soluble
aromatic poly(ether amide amide ether ketone ketone)s by electrophilic Friedel–Crafts
solution polycondensation
(182-188)
Reactive and Functional Polymers 70 #3 (2010)
Modification of carboxyl groups of
poly(ethylene-co-acrylic acid) via facile wet chemistry method: A kinetic study
(189-200)
Reactive and Functional Polymers 70 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
60.
Transport in Porous Media 81 #3 (2010)
(Titles and Abstracts) (R)
Potential Flow Past a Slightly Deformed Porous Circular Cylinder
(367-389)
Transport in Porous Media 81 #3 (2010)
A New Method for Generating Pore-Network Models of Porous Media
(391-407)
Transport in Porous Media 81 #3 (2010)
Thermal Instability in a Porous Medium Layer Saturated by a Nanofluid: Brinkman
Model
(409-422)
Transport in Porous Media 81 #3 (2010)
Three-Phase Flow Modelling Using Pore-Scale Capillary Pressures and Relative
Permeabilities for Mixed-Wet Media at the Continuum-Scale
(423-442)
Transport in Porous Media 81 #3 (2010)
Leak-off During Placement of Cr(III)-Partially Hydrolyzed Polyacrylamide Gelling
Solution in Fractured Porous Media
(443-460)
Transport in Porous Media 81 #3 (2010)
Convective Roll Instabilities of Vertical Throughflow with Viscous Dissipation
in a Horizontal Porous Layer
(461-477)
Transport in Porous Media 81 #3 (2010)
Fluid Sampling From Porous Rock to Determine Filtrate Contamination Profiles
Around a Well Bore
(479-503)
Transport in Porous Media 81 #3 (2010)
The Riemann Solution for the Injection of Steam and Nitrogen in a Porous Medium
(505-526)
Transport in Porous Media 81 #3 (2010)
Analytical Solution of Viscous Flow in Porous Media Using ADM and Comparison
with the Numerical Runge–Kutta Method
(527-546)
Transport in Porous Media 81 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
61.
International Journal of Heat and Fluid Flow 31 #1 (2010)
(Titles
and Abstracts)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
62.
International Journal of Heat and Mass Transfer 53
#1-8 (2010)
(Titles
and Abstracts)
Monte Carlo simulation and experimental heat
and mass transfer in direct contact membrane distillation
(1249-1259)
International Journal of Heat and Mass Transfer 53
#1-8 (2010)
Critical Rayleigh number of natural convection
in high porosity anisotropic horizontal porous layers
(1507-1513)
International Journal of Heat and Mass Transfer 53
#1-8 (2010)
Theoretical predictions of the effective
thermodiffusion coefficients in porous media
(1514-1528)
International Journal of Heat and Mass Transfer 53
#1-8 (2010)
An exact solution of magnetohydrodynamic
convection flow past an accelerated surface embedded in a porous medium
(1609-1611)
International Journal of Heat and Mass Transfer 53
#1-8 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
63.
International Journal of Impact Engineering 37 #5 (2010)
(Titles
and Abstracts)
Dynamic energy absorption characteristics of
foam-filled conical tubes under oblique impact loading
(475-488)
International Journal of Impact Engineering 37 #5 (2010)
Behavior of portable fiber reinforced concrete
vehicle barriers subject to blasts from contact charges
(521-529)
International Journal of Impact Engineering 37 #5 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
64.
International Journal of Multiphase Flow 36, #2 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
65.
International Journal of Non-Linear Mechanics 44 #2
(2010)
(Titles
and Abstracts)
Non-linear stability analysis of imperfect
thin-walled composite beams
(100-110)
International Journal of Non-Linear Mechanics 44 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
66.
The
International Journal of Pavement Engineering 11 #2 (2010)
(Titles
and Abstracts)
Laboratory investigation of the influence of warm asphalt additives on long-term
performance properties of CRM binders
(153 – 160)
The
International Journal of Pavement Engineering 11 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
67.
International Journal of Plasticity 26 #2 (2010)
(Titles
and Abstracts)
Thermo-mechanical constitutive modeling of
shape memory polyurethanes using a phenomenological approach
(204-218)
International Journal of Plasticity 26 #2 (2010)
Mean-field homogenization of
elasto-viscoplastic composites based on a general incrementally affine
linearization method
(219-238)
International Journal of Plasticity 26 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
68.
International Journal of Pressure Vessels and Piping 86 #12 (2009)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
69.
International
Journal of Reliability, Quality and Safety Engineering
16 # 5 (2009)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
70.
The
International Journal of Robotics Research
27 #11-12 (2008)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Roger D.
Corneliussen
Editor
Telephone: 610 883 0055
rcorneliussen@4spe.org
www.maropolymeronline.com
Copyright 2009 by Roger D. Corneliussen