Copyright 2009 by Roger D. Corneliussen
Below are links to the new articles by journals. A click should take you to the journal website. This is a great variation in where one ends up. In some cases, a click will take you to the issue in other cases a click will take you to the website and you must do a few more clicks to get to the issue. This is controlled by the publisher and not Maro. Fortunately, with a little practice, this should not be a serious problem. (RDC)
Polymer
Track (News)
Updated daily
Week 7 (2/15-2/19)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
01.
Advanced Materials 22 #7 (2010)
(Titles and Abstracts)
Nanotube Surfactant Design: The Versatility of
Water-Soluble Perylene Bisimides
(p 788-802)
Advanced Materials 22 #7 (2010)
Abstract
An Aqueous Emulsion Route to Synthesize
Mesoporous Carbon Vesicles and Their Nanocomposites
(p 833-837)
Advanced Materials 22 #7 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
02.
Advances in Colloid and Interface Science 153 #1-2 (2010)
(Titles and Abstracts)
Streaming potential studies of colloid,
polyelectrolyte and protein deposition
(1-29)
Advances in Colloid and Interface Science 153 #1-2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
03. Analytical
Chemistry
82, #4 (2010)
(Titles and Abstracts)
DNA Interaction with Palladium Chelates of Biogenic Polyamines Using Atomic
Force Microscopy and Voltammetric Characterization
(1245–1252)
Analytical Chemistry 82, #4 (2010)
Naked-Eye Detection and Quantification of Heparin in Serum with a Cationic
Polythiophene
(1326–1333)
Analytical Chemistry 82, #4 (2010)
Tholinomics—Chemical Analysis of Nitrogen-Rich Polymers
(1371–1380)
Analytical Chemistry 82, #4 (2010)
Isotopic Effect in the Separation of Polystyrene by Normal Phase and Reversed
Phase Liquid Chromatography
(1509–1514)
Analytical Chemistry 82, #4 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
04.
Applied Catalysis A: General 375 #2 (2010)
Titles and Abstracts
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
05.
Applied Physics
Letters 96 #6 (2010)
Titles and Abstracts
Reactive radical facilitated reaction-diffusion modeling for holographic
photopolymerization
(# 061103)
Applied Physics
Letters 96 #6 (2010)
High-Q silica microsphere by poly(methyl methacrylate) coating and
modifying
(# 061106)
Applied Physics
Letters 96 #6 (2010)
Crystallitic orientation effects on charge transport in polythiophene thin-film
transistors
(# 063301)
Applied Physics
Letters 96 #6 (2010)
MoO3/poly(9,9-dioctylfluorene-co-N-[4-(3-methylpropyl)]-diphenylamine)
double-interlayer effect on polymer solar cells
(# 063303)
Applied Physics
Letters 96 #6 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
06.
Archive of Applied
Mechanics 80
#4 (2010)
(Titles and Abstracts)
Stokes flow through a permeable tube
( 323-333)
Archive of Applied Mechanics 80 #4 (2010)
Influence of imperfect elastic contact condition on the antiplane effective
properties of piezoelectric fibrous composites
(377-388)
Archive of Applied Mechanics 80 #4 (2010)
Analytical solution to a mixed boundary value elastic problem of a roller-guided
panel of laminated composite
(401-412)
Archive of Applied Mechanics 80 #4 (2010)
Boundary-layer hygrothermal stresses in laminated, composite, circular,
cylindrical shell panels
(413-440)
Archive of Applied Mechanics 80 #4 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
07.
Catalysis
Today
150, #1-2 (2010)
(Titles and Abstracts)
Hydrogenation of chiral nitrile on highly
ordered mesoporous carbon-supported Pd catalysts
(22-27)
Catalysis
Today
150, #1-2 (2010)
Decarboxylation of fatty acids over Pd
supported on mesoporous carbon
(28-31)
Catalysis
Today
150, #1-2 (2010)
Linoleic acid isomerization over mesoporous
carbon supported gold catalysts
(32-36)
Catalysis
Today
150, #1-2 (2010)
Influence of the porous structure of activated
carbons in the activity of ATRP catalyst for methyl methacrylate polymerization
(42-48)
Catalysis
Today
150, #1-2 (2010)
In situ polymerization and characterizations of
polyaniline on MWCNT powders and aligned MWCNT films
(71-76)
Catalysis
Today
150, #1-2 (2010)
Preparation of highly loaded Pt/carbon xerogel
catalysts for Proton Exchange Membrane fuel cells by the Strong Electrostatic
Adsorption method
(119-127)
Catalysis
Today
150, #1-2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
08.
Chemical Communications #8 (2010)
(Titles, Abstracts and Articles)
Synthesis of a new fluorescent conjugated polymer microsphere for chemical
sensing in aqueous media
(1263 - 1265)
Chemical Communications #8 (2010)
Metallo-supramolecular diblock copolymers based on heteroleptic cobalt(III)
and nickel(II) bis-terpyridine complexes
(1296 - 1298)
Chemical Communications #8 (2010)
Controlled drug release from porous materials by plasma polymer deposition
(1317 - 1319)
Chemical Communications #8 (2010)
Ultramicropore formation in PAN/camphor-based carbon nanofiber paper
(1320 - 1322)
Chemical Communications #8 (2010)
Macroscopic evidence of strong cation–
interactions in a synthetic polymer system
(1341 - 1343)
Chemical Communications #8 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
09.
Chemical Engineering Science 65 #5 (2010)
(Titles and Abstracts) (T)
New insight into the action of supercritical
carbon dioxide for grafting of maleic anhydride onto isotactic polypropylene by
reactive extrusion
(1621-1626)
Chemical Engineering Science 65 #5 (2010)
Characteristic analysis on a reactive extrusion
process for the imidization of poly(styrene-co-maleic anhydride) with aniline
(1781-1789)
Chemical Engineering Science 65 #5 (2010)
Flow through a finned channel filled with a
porous medium
(1826-1831)
Chemical Engineering Science 65 #5 (2010)
Kinetic behaviors of CO2 hydrates in
porous media and effect of kinetic promoter on the formation kinetics
(1840-1845)
Chemical Engineering Science 65 #5 (2010)
PEPT combined with high speed digital imaging
for particle tracking in dynamic foams
(1887-1890)
Chemical Engineering Science 65 #5 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
10.
Chemical Physics 368 #1-2 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
11.
Chemical
Week
Titles and Abstracts) Weekly (H)
Trade
Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
12.
Colloids and Surfaces A: Physicochemical and Engineering Aspects 356 #1-3 (2010)
(Titles and Abstracts)
Quantitative analysis of Pt–PAMAM ligand
exchange reactions: Time and concentration effects
(10-15)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 356 #1-3 (2010)
Electrodeposition of composite zinc oxide–chitosan
films
(63-70)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 356 #1-3 (2010)
Optical detection of the morphology of hollow
polymer particles prepared from seeded emulsions in the presence of
n-octanol
(78-83)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 356 #1-3 (2010)
Antipolyelectrolyte swelling of amphiphilic
hydroxypropyl methylcellulose phthalate gels
(89-96)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 356 #1-3 (2010)
Preparation of core–shell coagulates by
hydrophobic heterocoagulation of micron-sized poly(methyl methacrylate) and
submicron-sized poly(styrene) particles
(169-175)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 356 #1-3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
13. Colloids
and Surfaces B: Biointerfaces 76 #2 (2010)
(Titles and Abstracts)
Grafting of chitosan as a biopolymer onto wool
fabric using anhydride bridge and its antibacterial property
(397-403)
Colloids
and Surfaces B: Biointerfaces 76 #2 (2010)
Characterization and release behaviors of
porous PCL/Eudragit RS microcapsules containing tulobuterol
(404-409)
Colloids
and Surfaces B: Biointerfaces 76 #2 (2010)
PEI grafted hyperbranched polymers with
polyglycerol as a core for gene delivery
(427-433)
Colloids
and Surfaces B: Biointerfaces 76 #2 (2010)
Increased stability in plasma and enhanced
cellular uptake of thermally denatured albumin-coated liposomes
(434-440)
Colloids
and Surfaces B: Biointerfaces 76 #2 (2010)
Protein adsorption on poly(N-isopropylacrylamide)-modified
silicon surfaces: Effects of grafted layer thickness and protein size
(468-474)
Colloids
and Surfaces B: Biointerfaces 76 #2 (2010)
Fabrication of cationic nanomicelle from
chitosan-graft-polycaprolactone as the
carrier of 7-ethyl-10-hydroxy-camptothecin
(475-482)
Colloids
and Surfaces B: Biointerfaces 76 #2 (2010)
Glucose-responsive composite microparticles
based on chitosan, concanavalin A and dextran for insulin delivery
(483-488)
Colloids
and Surfaces B: Biointerfaces 76 #2 (2010)
Surface characterization and in vitro
biocompatibility assessment of photosensitive polyimide films
(505-511)
Colloids
and Surfaces B: Biointerfaces 76 #2 (2010)
Structural and morphological changes in
bacteria-membrane mimetic DPPE/DPPG/water systems induced by sulfadiazine
(519-528)
Colloids
and Surfaces B: Biointerfaces 76 #2 (2010)
Self-assembled chitosan/heparin multilayer film
as a novel template for in situ synthesis of silver nanoparticles
(549-555)
Colloids
and Surfaces B: Biointerfaces 76 #2 (2010)
Fabrication of paper-based microfluidic sensors
by printing
(564-570)
Colloids
and Surfaces B: Biointerfaces 76 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
14.
Composite Structures 92 #7 (2010)
(Titles and Abstracts)
Asymptotic homogenization algorithm for
reinforced metal-matrix elasto-plastic composites
(1581-1590)
Composite Structures 92 #7 (2010)
Effects of low and high temperatures on tensile
behavior of adhesively-bonded GFRP joints
(1631-1639)
Composite Structures 92 #7 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
15.
Engineering Failure Analysis 17 #3 (2010)
(Titles
and Abstracts)
Characterization of the fracture behavior of
NBR and FKM grade elastomers for oilfield applications
(701-711)
Engineering Failure Analysis 17 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
16.
Environmental
Science & Technology 44 #4 (2010)
(Titles
and Abstracts)
Microbial Fuel Cell Cathodes With Poly(dimethylsiloxane) Diffusion Layers
Constructed around Stainless Steel Mesh Current Collectors
(1490–1495)
Environmental Science & Technology 44 #4 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
17. Fatigue & Fracture of Engineering Materials and Structures 33 #3 (2010)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
18.
Heat Transfer Engineering 31 #9 (2010)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
19.
International Journal of Plasticity 26 #3 (2010)
(Titles
and Abstracts)
Modelling large deformation behaviour under
loading–unloading of semicrystalline polymers: Application to a high density
polyethylene
(329-347)
International Journal of Plasticity 26 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
20.
International Journal of Polymeric Materials 59 #4 (2010)
(Titles and Abstracts)
Glass Reinforcement of Various Epoxy Resin (Dimethylolurea-Phenol Resin) Systems
(231 – 240)
International Journal of Polymeric Materials 59 #4 (2010)
Synthesis and Physicochemical Studies of Some Novel Homopolyesters Based on s-Triazine
(241 – 254)
International Journal of Polymeric Materials 59 #4 (2010)
Synthesis of 4-Methacryloylmethyldiphenylsulphone and its Copolymerization
(255 – 262)
International Journal of Polymeric Materials 59 #4 (2010)
Graft Copolymers of Acrylonitrile onto Dextrin for Use in Separation
Technologies
(263 – 285)
International Journal of Polymeric Materials 59 #4 (2010)
Variation in Properties of Chitosan Prepared at Different Alkali Concentrations
from Squid Pen and Shrimp Shell
(286 – 291)
International Journal of Polymeric Materials 59 #4 (2010)
The Influence of the Measuring/Viewing Angle on the Color of Injection-Molded
Plastics
(292 – 306)
International Journal of Polymeric Materials 59 #4 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
21.
Journal of Applied Polymer Science 116 #4 (2010)
(Titles and Abstracts) (H)
Filled polymers with high nanoparticles
concentration - Synthesis and properties
(p 1857-1866)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Mechanical properties of polypropylene composite
reinforced with oil palm empty fruit bunch pulp
(p 1867-1872)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Fibrous membranes of cellulose acetate and
poly(vinyl pyrrolidone) by electrospinning method: Preparation and
characterization
(p 1873-1878)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Modeling the fabrication process of
micropatterned macromolecular scaffolds for peripheral nerve regeneration
(p 1879-1888)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Synergistic flame retardant effect of cerium
oxide in ethylene-vinyl acetate/aluminum hydroxide blends
(p 1889-1893)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Carbon nanotube-hybridized supramolecular
hydrogel based on PEO-b-PPO-b-PEO/
-cyclodextrin
as a potential biomaterial
(p 1894-1901)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Photoisomerization behavior of bisbenzylidene and
1,3,4-oxadiazole-based liquid crystalline polyesters
(p 1902-1912)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Poly(ethylene-2,6-naphthalate) nanofiber prepared
by carbon dioxide laser supersonic drawing
(p 1913-1919)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Synthetic amphoteric copolymer as a dispersant
for aqueous barium titanate slurries
(p 1920-1928)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
The effect of hydrolytic and thermal degradation
on mechanical properties of industrial polyester yarns
(p 1929-1932)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Application of Mie light scattering to the
morphological development of polypropylene/polystyrene blends. I. Method for the
determination of Mie scattering
(p 1933-1939)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Influence of temperature and penetration depth on
photopolymerization of n-butyl acrylate using a narrow channel reactor
(p 1940-1947)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Surface modification effects of core-shell rubber
particles on the toughening of poly(butylene terephthalate)
(p 1948-1957)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Influence of surface morphology of the kraft pulp
fibers on the growth of the transcrystalline layer of polypropylene
(p 1958-1966)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Preparation, characterization, and antibacterial
properties of electrospun polyacrylonitrile fibrous membranes containing silver
nanoparticles
(p 1967-1976)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Layered double hydroxide/NaSb(OH)6-poly(vinyl
chloride) nanocomposites: Preparation, characterization, and thermal stability
(p 1977-1984)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Thermosensitive PCL-PEG-PCL hydrogels: Synthesis,
characterization, and delivery of proteins
(p 1985-1993)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Preparation of microcellular poly(ethylene-co-octene)
rubber foam with supercritical carbon dioxide
(p 1994-2004)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Artificial and natural weathering of ABS
(p 2005-2014)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Rheological, morphological, and heat seal
properties of linear low density polyethylene and cyclo olefine copolymer
(LLDPE/COC) blends
(p 2015-2022)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Structure and properties of PAN-based activated
carbon hollow fibers: Effect of ammonium dibasic phosphate pretreatment
(p 2023-2028)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Dramatic improvement in mechanical properties of
GNs-reinforced HDPE nanocomposites
(p 2029-2034)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Conductivity and piezoresistivity of conductive
carbon black filled polymer composite
(p 2035-2039)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Novel monocyclopentadienyl zirconium and hafnium
trialkoxide complexes: Syntheses and catalytic properties for olefin
polymerization
(p 2040-2049)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Thermal and mechanical properties of blends of
polylactide and poly(ethylene glycol-co-propylene glycol): Influence of
annealing
(p 2050-2057)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Thermal stability of poly(vinyl chloride)/layered
double hydroxide nanocomposites
(p 2058-2064)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Synthesis and properties of copolymer epoxy
resins prepared from copolymerization of bisphenol A, epichlorohydrin, and
liquefied Dendrocalamus latiflorus
(p 2065-2073)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Preparation of new water-soluble chitosan
containing hyperbranched-vinylsulfonic acid sodium salt and their antimicrobial
activities and chelation with metals
(p 2074-2082)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Preparation, characterization, and in vitro
application of composite films based on gelatin and collagen from natural
resources
(p 2083-2094)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
The preparation and thermodynamic behaviors of
chlorosulfonated polyethylene
(p 2095-2100)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Effects of organo-clay modifier on
physical-mechanical properties of butyl-based rubber nano-composites
(p 2101-2109)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Graphite carbon foam films prepared from porous
polyimide with in situ formed catalytic nickel particles
(p 2110-2118)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Nonisothermal crystallization kinetics of
modified bamboo fiber/PCL composites
(p 2119-2125)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Fabrication and apparent kinetic study of
poly(methyl methacrylate)/poly(octyl acrylate) and poly(octyl
acrylate)/poly(methyl methacrylate) latex interpenetrating polymer networks
(p 2126-2132)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Investigating the micellization behavior of
cetyltrimethylammonium bromide: As affected by the contents of poly(ethylene
oxide) and temperature of the system
(p 2133-2142)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
The structure and dynamic properties of
thermoplastic polyurethane elastomer/hindered phenol hybrids
(p 2143-2150)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
The novel alginate/N-succinyl-chitosan
antibacterial blend fibers
(p 2151-2156)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Synthesis, thermal degradation, and flame
retardance of novel triazine ring-containing macromolecules for intumescent
flame retardant polypropylene
(p 2157-2165)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
The water vapor sorption behavior of flax
fibers - Analysis using the parallel exponential kinetics model and
determination of the activation energies of sorption
(p 2166-2173)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Effect of protein-loading on properties of
wet-spun poly(L,D-lactide) multifilament
fibers
(p 2174-2180)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Electrospun ultrathin nylon fibers for protective
applications
(p 2181-2187)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Encapsulation of palladium nanoparticles by
multiwall carbon nanotubes-graft-poly(citric acid) hybrid materials
(p 2188-2196)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Transparent magnesium hydroxide/acrylate
nanocomposite films
(p 2197-2204)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Performance of a newly developed hydrophilic
additive blended with different ultrafiltration base polymers
(p 2205-2215)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
The effect of pH and temperature on the dye
sorption of wool powders
(p 2216-2226)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Interfacial properties of chitosan and
nonylphenol polyoxyethylene ether
(p 2227-2233)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Preparation and characterization of microcapsules
containing capsaicin
(p 2234-2241)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Anisotropic in vitro vessel model using
poly(vinyl alcohol) hydro gel and mesh material
(p 2242-2250)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Asymmetric cellulose acetate dialysis membranes:
Synthesis, characterization, and performance
(p 2251-2259)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Halogen-free flame-retardant rigid polyurethane
foams: Effect of alumina trihydrate and triphenylphosphate on the properties of
polyurethane foams
(p 2260-2268)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Degradation of poly(butylene terephthalate) in
different supercritical alcohol solvents
(p 2269-2274)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Molecular dynamics study of TiO2/poly(acrylic
acid-co-methyl methacrylate) and Fe3O4/polystyrene
composite latex particles prepared by heterocoagulation
(p 2275-2284)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Reactions of low molecular weight highly
functionalized maleic anhydride grafted polyethylene with polyetherdiamines
(p 2285-2297)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Architecture of prototype copolymer brushes
composed of alternating structure and intramolecular phase separation of side
chains in solution
(p 2298-2304)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Properties of compatibilized polylactide blend
films with gelatinized corn and tapioca starches
(p 2305-2311)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Evaluation of mechanical properties of
polypropylene/polycarbonate/SEBS ternary polymer blends using Taguchi
experimental analysis
(p 2312-2319)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Rheological evaluation of the isothermal cure
characteristics of medical grade silicone elastomers
(p 2320-2327)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Rheological behavior of polymer-clay
nanocomposite hydrogels: Effect of nanoscale interactions
(p 2328-2335)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Preparation and characterization of thermally
conductive polystyrene/carbon nanotubes composites
(p 2336-2342)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Applicability of nanofiltration for the advanced
treatment of landfill leachate
(p 2343-2347)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
A study of critical processing technologies of
liquid crystal polymer printed circuit board for high speed application
(p 2348-2358)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Measurement of the solubility and diffusivity of
blowing agents in polystyrene
(p 2359-2365)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Using hop bines as reinforcements for lightweight
polypropylene composites
(p 2366-2373)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Structure and properties of polyethylene ionomer
based nanocomposites
(p 2374-2383)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Synthesis and characterization of
fluorine-containing liquid crystalline polysiloxanes bearing cholesteryl
cinnamate mesogens and trifluoromethyl-substituted mesogens
(p 2384-2395)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Macroscopic N-halamine biocidal polymeric
beads
(p 2396-2408)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Fabrication of water-stable electrospun
polyacrylic acid-based nanofibrous mats for removal of copper (II) ions in
aqueous solution
(p 2409-2417)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Photoactive antimicrobial PVA hydrogel prepared
by freeze-thawing process for wound dressing
(p 2418-2424)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Gas phase sensors for bases using rhodamine B in
nafion films
(p 2425-2432)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
A simple one-step synthesis and polymerization of
plant oil triglyceride iodo isocyanates
(p 2433-2440)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Novel poly(amide-hydrazide)s and
copoly(amide-hydrazide)s from bis-(4-aminobenzyl) hydrazide and aromatic diacid
chlorides: Synthesis and characterization
(p 2441-2450)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Modification of recycled polycarbonate with
core-shell structured latexes for enhancement of impact resistance and flame
retardancy
(p 2451-2464)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Formation and structure of poly(methyl
methacrylate) gels containing triphenyl vinyl silane
(p 2465-2472)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Synthesis of hyperbranched
poly(3-methyl-3-hydroxymethyloxetane) and their application to separate basic
proteins by adsorption coated column
(p 2473-2479)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
Effect of fiber surface morphology on the
hydrophilicity modification of cold plasma-treated polypropylene nonwoven
fabrics
(p 2480-2486)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
22.
Journal
of Fire Protection Engineering 20 #1 (2010)
(Titles and Abstracts) S
A Risk-based Equivalence Approach to Fire Resistance
Design for Buildings
(5-26)
Journal of Fire Protection Engineering 20 #1 (2010)
[Abstract]
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
23.
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #4 (2010)
(Titles and Abstracts) (H)
Hafnium Chloride Catalyzed Polycondensation of α,ω-Alkanediol with Dicarboxylic
Acids or Succinic Anhydride
( 303 – 308)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #4 (2010)
Water Sorption Properties and Antimicrobial Action of Zinc Oxide Nanoparticles-Loaded
Cellulose Acetate Films
(309 – 317)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #4 (2010)
Synthesis, Characterization and Application of Amphiphilic Copolymer Poly(vinyl
alcohol)-g-Poly(butyl acrylate)
(318 – 323)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #4 (2010)
Dialkylzinc Compounds as Chain Transfer Agents in Ethylene and Propylene
Polymerizations Catalyzed by Metallocene Catalysts
(324 – 328)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #4 (2010)
Catalytic Activity of Polymer Anchored Cu-tren Complex in the Oxidation of
2,6-Di-t-butyl Phenol
(329 – 334)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #4 (2010)
Self-healing Mechanism and Mechanical Behavior of Hydrophobic Association
Hydrogels with High Mechanical Strength
(335 – 342)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #4 (2010)
Synthesis and Fluorescent Behaviors of Polymers Bearing Stilbene Derivatives
(343 – 349)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #4 (2010)
Preparation and Characterization of New Optically Active Poly(amide-imide)s from
N,N′-(bicyclo[2,2,2]oct-7-ene-2,3,5,6-tetra carboxylic)-bis-L-isoleucine and
Aromatic Diamines
(350 – 357)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #4 (2010)
Hydrophobically Associating Polyacrylamides Prepared by Inverse Suspension
Polymerization: Synthesis, Characterization and Aqueous Solution Properties
(358 – 367)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #4 (2010)
Self-emulsifying Hydroxy Acrylic Polymer Dispersions for Two Component
Waterborne Polyurethane Coatings
(368 – 374)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #4 (2010)
Photo-induced Charge-transfer and Photovoltaic Effect in a Composite Involving a
Nonconjugated Conductive Polymer and C60
(375 – 379)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #4 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
24.
Journal of
Reinforced Plastics and Composites 29 #2 (2010)
(Titles and Abstracts)
Research on Shear Lag in HFRP Composite I-Beams under
Bending Loads
(165-178)
Journal of Reinforced Plastics and Composites 29 #2 (2010)
[Abstract]
Influence of the Stacking Sequence on the Mechanical
Properties of Glass/Sisal Hybrid Composites
(179-189)
Journal of Reinforced Plastics and Composites 29 #2 (2010)
[Abstract]
Experimental Study on Retrofitting of Stressed RC Beams
using GFRP Jackets
(190-200)
Journal of Reinforced Plastics and Composites 29 #2 (2010)
[Abstract]
Development of Recycled Polypropylene Matrix Composites
Reinforced with Waste Jute Caddies
(201-208)
Journal of Reinforced Plastics and Composites 29 #2 (2010)
[Abstract]
Natural Fiber-Reinforced Recycled Polypropylene:
Microstructural and Mechanical Properties
(209-217)
Journal of Reinforced Plastics and Composites 29 #2 (2010)
[Abstract]
Preparation and Properties of Palm Oil-Based Rigid
Polyurethane Nanocomposite Foams
(218-225)
Journal of Reinforced Plastics and Composites 29 #2 (2010)
[Abstract]
Natural Frequencies and Mode Shapes of Composite
Cylindrical Delaminated Shells by Finite Element
(226-237)
Journal of Reinforced Plastics and Composites 29 #2 (2010)
[Abstract]
Analysis of Physical and Solvent Transport Behavior of
Poly(Ethylene-co-Vinyl Acetate)/Silica Composites
(238-246)
Journal of Reinforced Plastics and Composites 29 #2 (2010)
[Abstract]
Failure Behavior of Composite Laminates with Multi-Pin
Loaded Holes
(247-253)
Journal of Reinforced Plastics and Composites 29 #2 (2010)
[Abstract]
Mechanism of Translaminar Fracture in Glass/Textile
Fabric Polymer Hybrid Composites
(254-265)
Journal of Reinforced Plastics and Composites 29 #2 (2010)
[Abstract]
Prediction of Long Term Flexural Fatigue Strength of
Honeycomb Sandwich Composites
(266-277)
Journal of Reinforced Plastics and Composites 29 #2 (2010)
[Abstract]
DSC Analysis and Mechanical Properties of Wood—Plastic
Composites
(278-289)
Journal of Reinforced Plastics and Composites 29 #2 (2010)
[Abstract]
Effects of Various Environmental Conditions on RC
Columns Wrapped with FRP Sheets
(290-309)
Journal of Reinforced Plastics and Composites 29 #2 (2010)
[Abstract]
Mechanical and Physical Properties of Wood-Plastic
Composite Panels
(310-319)
Journal of Reinforced Plastics and Composites 29 #2 (2010)
[Abstract]
*****************************************
Journal of
Reinforced Plastics and Composites 29 #3 (2010)
(Titles and Abstracts)
Post-curing Effects on Hygrothermal Behavior of RT-cured
Glass/Epoxy Composites
(325-330)
Journal of Reinforced Plastics and Composites 29 #3 (2010)
[Abstract]
AC Electrical Properties of Epoxy/Silicon Carbide
Whiskers Composites Coated with TiO 2 and Poly(divinylbenzene)
(331-342)
Journal of Reinforced Plastics and Composites 29 #3 (2010)
[Abstract]
Chemical Resistance Studies of Silk/Sisal
Fiber-Reinforced Unsaturated Polyester-Based Hybrid Composites
(343-345)
Journal of Reinforced Plastics and Composites 29 #3 (2010)
[Abstract]
Modified Average Stress Criterion to Predict the
Fracture Strength of Various Lay-Ups of Carbon/Epoxy Laminates
(346-358)
Journal of Reinforced Plastics and Composites 29 #3 (2010)
[Abstract]
Properties of Regenerated Cellulose Lyocell
Fiber-Reinforced Composites
(359-371)
Journal of Reinforced Plastics and Composites 29 #3 (2010)
[Abstract]
Derivation of Transfer Function of an IPMC Actuator
Based on Pseudo-Rigid Body Model
(372-390)
Journal of Reinforced Plastics and Composites 29 #3 (2010)
[Abstract]
On the Crush Behavior of an Ultra Light Multi-Cell
Foam-Filled Composite Structure under Axial Compression
(391-408)
Journal of Reinforced Plastics and Composites 29 #3 (2010)
[Abstract]
Residual Stresses in Composite Plates with Central
Filleted Hole
(409-421)
Journal of Reinforced Plastics and Composites 29 #3 (2010)
[Abstract]
Investigation of Fracture Toughness of Laminated
Stitched Composites Subjected to Mixed Mode Loading
(422-430)
Journal of Reinforced Plastics and Composites 29 #3 (2010)
[Abstract]
Effect of Acetylation and MAPE on the Properties of
Steam-Exploded Acacia mangium Fiber—HDPE Composites
(431-444)
Journal of Reinforced Plastics and Composites 29 #3 (2010)
[Abstract]
Physico-Mechanical Properties of Jute Fiber Reinforced
Polypropylene Composites
(445-455)
Journal of Reinforced Plastics and Composites 29 #3 (2010)
[Abstract]
Experimental Investigation of Injection Molding of
Wood/Plastics Composites
(456-465)
Journal of Reinforced Plastics and Composites 29 #3 (2010)
[Abstract]
Mechanical, Degradation, and Interfacial Properties of
Synthetic Degradable Fiber Reinforced Polypropylene Composites
(466-476)
Journal of Reinforced Plastics and Composites 29 #3 (2010)
[Abstract]
***************************************
Journal of
Reinforced Plastics and Composites 29 #4 (2010)
(Titles and Abstracts)
Mechanical and Thickness Swelling of Particleboard
Composites Made from Three-Year-Old Poplar Clones
(481-489)
Journal of Reinforced Plastics and Composites 29 #4 (2010)
[Abstract]
Friction and Wear Properties of PA6-reinforced PTFE
Composites
(490-496)
Journal of Reinforced Plastics and Composites 29 #4 (2010)
[Abstract]
The Influence of Interface Geometry on the Joint
Strengths of Hot Plate Welded Composites
(497-509)
Journal of Reinforced Plastics and Composites 29 #4 (2010)
[Abstract]
Development of Recycled Polypropylene Matrix Composites
Reinforced with Fly Ash
(510-517)
Journal of Reinforced Plastics and Composites 29 #4 (2010)
[Abstract
Preparation and Characterization of YBa2Cu3O7-x/Linear
Low Density Polyethylene (LLDPE) Composites
(518-523)
Journal of Reinforced Plastics and Composites 29 #4 (2010)
[Abstract]
[P
Mechanical and Dilatometric Properties of Carboxylated
SWCNT/Epoxy Composites: Effects of the Dispersion in the Resin and in the
Hardener
(524-530)
Journal of Reinforced Plastics and Composites 29 #4 (2010)
[Abstract]
Anchorages Effects on CFRP-to-concrete Bond Strength
(539-557)
Journal of Reinforced Plastics and Composites 29 #4 (2010)
[Abstract]
The Rheological and Mechanical Properties of
Ethylene-Vinyl Acetate (EVA) Copolymer and Organoclay Nanocomposites
(558-570)
Journal of Reinforced Plastics and Composites 29 #4 (2010)
Development Length of Straight FRP Composite Bars
Embedded in Concrete
(571-589)
Journal of Reinforced Plastics and Composites 29 #4 (2010)
[Abstract]
Controllability of Structural Performance of RC Panels
Modified with Optimal Fiber Hybridization System
(590-599)
Journal of Reinforced Plastics and Composites 29 #4 (2010)
[Abstract]
Hygrothermal Stresses in Coated Hollow/Solid Fibers
Reinforced Polymer Matrix Composites (PMCs)
(600-617)
Journal of Reinforced Plastics and Composites 29 #4 (2010)
[Abstract]
Structure, Mechanical, and Swelling Behaviors of
Poly(vinyl alcohol)/SiO2 Hybrid Membranes
(618-629)
Journal of Reinforced Plastics and Composites 29 #4 (2010)
[Abstract]
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
25.
Macromolecular Chemistry and Physics 211 #4 (2010)
(Titles and Abstracts)
Mathematical Modeling and Optimization of Run
Parameters of Crystallization Analysis Fractionation (CRYSTAF)
(p 383-392) Macromolecular
Chemistry and Physics 211 #4 (2010)
Abstract
Structure and Excited-State Interactions in
Composites of CdSe Nanorods and Interface-Compatible Polythiophene-graft-poly(N,N-dimethylaminoethyl
methacrylates)
(p 393-403) Macromolecular
Chemistry and Physics 211 #4 (2010)
Abstract
Folic Acid Modified Poly(lactide-co-glycolide)
Nanoparticles, Layer-by-Layer Surface Engineered for Targeted Delivery
(p 404-411) Macromolecular
Chemistry and Physics 211 #4 (2010)
Abstract
Silica Reinforced Organic-Inorganic Hybrid
Polyurethane Nanocomposites From Sustainable Resource
(p 412-419) Macromolecular
Chemistry and Physics 211 #4 (2010)
Abstract
Effect of Solvent-Nonsolvent Miscibility on
Morphology and Electrochemical Performance of SiO2/PVdF-HFP-Based
Composite Separator Membranes for Safer Lithium-Ion Batteries
(p 420-425) Macromolecular
Chemistry and Physics 211 #4 (2010)
Abstract
Exploring the Factors Affecting the Solubility of
Chitosan in Water
(p 426-433) Macromolecular
Chemistry and Physics 211 #4 (2010)
Abstract
Stimulated Deformation of Polysiloxane Capsules
in External Electric Fields
(p 434-442) Macromolecular
Chemistry and Physics 211 #4 (2010)
Abstract
Fullerene Substitution of Donor/Acceptor Branched
Disubstituted Polyacetylenes: Significantly Accelerated Polymerization by the C60
Pendant
(p 443-452) Macromolecular
Chemistry and Physics 211 #4 (2010)
Abstract
Chitosan-based Polyelectrolyte Complexes Soluble
in Enzyme-friendly pH Range
(p 453-460) Macromolecular
Chemistry and Physics 211 #4 (2010)
Abstract
Photochemical Reactions of Poly(4-vinylphenol)
Thin Films
(p 461-470) Macromolecular
Chemistry and Physics 211 #4 (2010)
Abstract
Morphology of Novel PEAs Containing Two
Consecutive Amide Bonds Randomly Distributed Along the Polyester Backbone
(p 471-480) Macromolecular
Chemistry and Physics 211 #4 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
26.
Macromolecular Rapid Communications 31 #4 (2010)
(Titles and Abstracts)
Metal-Containing Polymers: Building Blocks for
Functional (Nano)Materials
(p 331-350)
Macromolecular Rapid Communications 31 #4 (2010)
Abstract
Self-Complementary Nucleoside-Thiophene Hybrid
Systems: Synthesis and Supramolecular Organization
(p 351-355)
Macromolecular Rapid Communications 31 #4 (2010)
Abstract
Impact of Nanoscale Confinement on Crystal
Orientation of Poly(ethylene oxide)
(p 356-361)
Macromolecular Rapid Communications 31 #4 (2010)
Abstract
Synthesis with Single Macromolecules: Covalent
Connection between a Neutral Dendronized Polymer and Polyelectrolyte Chains as
well as Graphene Edges
(p 362-367)
Macromolecular Rapid Communications 31 #4 (2010)
Abstract
Studying and Suppressing Olefin Isomerization
Side Reactions During ADMET Polymerizations
(p 368-373)
Macromolecular Rapid Communications 31 #4 (2010)
Abstract
Poly(vinyl phosphonic acid): Hydrodynamic
Properties and SEC-Calibration in Aqueous Solution
(p 374-379)
Macromolecular Rapid Communications 31 #4 (2010)
Abstract
Reduced Graphene Oxide/Poly(3-hexylthiophene)
Supramolecular Composites
(p 380-384)
Macromolecular Rapid Communications 31 #4 (2010)
Abstract
A Novel High Throughput Method to Investigate
Polymer Dissolution
(p 385-390)
Macromolecular Rapid Communications 31 #4 (2010)
Abstract
New Low Bandgap Dithienylbenzothiadiazole
Vinylene Based Copolymers: Synthesis and Photovoltaic Properties
(p 391-398)
Macromolecular Rapid Communications 31 #4 (2010)
Abstract
Formation of Vesicular Morphologies via
Polymerization Induced Self-Assembly and Re-Organization
(p 399-404)
Macromolecular Rapid Communications 31 #4 (2010)
Abstract
A Novel Approach for Mixing ZnO Nanoparticles
into Poly(ethyl methacrylate)
(p 405-410)
Macromolecular Rapid Communications 31 #4 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
27. Macromolecular Symposia 287
#1 (2010)
(Titles and Abstracts)
(H)
Modular Synthesis and Electronic and
Hole-Transport Properties of Monodisperse Oligophenothiazines
(p 1-7)
Macromolecular Symposia 287 #1 (2010)
Abstract
Chromophoric Barbituric Acid Derivatives with
Adjustable Hydrogen-Bonding Patterns as Component for Supramolecular Structures
(p 8-15)
Macromolecular Symposia 287 #1 (2010)
Abstract
Intelligent Hydrogels Via Gamma-Ray Induced
Polymerization of Micellar Monomer Solutions and Microemulsions
(p 16-21)
Macromolecular Symposia 287 #1 (2010)
Abstract
Ion-selective Membranes Prepared Upon
Layer-by-Layer Assembly of Azamacrocycles and Polyelectrolytes
(p 22-31)
Macromolecular Symposia 287 #1 (2010)
Abstract
Nano-Encapsulation of Proteins Via Self-Assembly
with Lipids and Polymers
(p 32-36)
Macromolecular Symposia 287 #1 (2010)
Abstract
Dendritic Macromolecules as Inhibitors to
Protein-Protein Binding
(p 37-41)
Macromolecular Symposia 287 #1 (2010)
Abstract
Rotaxanes and Catenanes Derived from Tetra-Urea
Calix[4]arenes
(p 42-50)
Macromolecular Symposia 287 #1 (2010)
Abstract
Synthesis of Cyclodextrin and Sugar-Based
Oligomers for the Efavirenz Drug Delivery
(p 51-59)
Macromolecular Symposia 287 #1 (2010)
Abstract
Unexpected Interactions of an Alternating
Poly(ether-ester) with Artificial and Biological Bilipidic Membranes
(p 60-68)
Macromolecular Symposia 287 #1 (2010)
Abstract
Water-Soluble Polymers and Their Polymer-Metal
Ion-Complexes as Antibacterial Agents
(p 69-79)
Macromolecular Symposia 287 #1 (2010)
Abstract
Ultrasound-Triggered Release of Ibuprofen from a
Chitosan-Mesoporous Silica Composite- a Novel Approach for Controlled Drug
Release (p 80-88)
Abstract
Isolation of a Dosage Dependent Lethal Mutation
in Ubiquitin Gene of Saccharomyces Cerevisiae
(p 89-94)
Macromolecular Symposia 287 #1 (2010)
Abstract
Aging of Polyimides in High Temperature
Environments
(p 95-100)
Macromolecular Symposia 287 #1 (2010)
Abstract
Crystallization and Physical Ageing of Poly
(2-vinyl pyridine)-b-poly(ethylene oxide) Diblock Copolymers
(p 101-106)
Macromolecular Symposia 287 #1 (2010)
Abstract
Polymeric Monolithic Media: Synthesis, Pore Size
Selective Functionalization and Applications
(p 107-110)
Macromolecular Symposia 287 #1 (2010)
Abstract
Influence of the Operative Conditions on the
Characteristics of Poly(D,L-lactide-co-glycolide) Synthesized in
Supercritical Carbon Dioxide
(p 111-118)
Macromolecular Symposia 287 #1 (2010)
Abstract
Oligomeric Branched Polyethers with Multiple
Hydroxyl Groups by Cationic Ring-Opening Polymerization for Inorganic Surface
Modification
(p 119-126)
Macromolecular Symposia 287 #1 (2010)
Abstract
Novel Functional Mesoporous Materials Obtained
from Nanostructured Diblock Copolymers
(p 127-134)
Macromolecular Symposia 287 #1 (2010)
Abstract
Pore Modification in Porous Ceramic Membranes
With Sol-Gel Process and Determination of Gas Permeability and Selectivity
(p 135-142)
Macromolecular Symposia 287 #1 (2010)
Abstract
CVD Growth of Carbon Nanotubes and Nanofibers:
Big Length and Constant Diameter
(p 143-147)
Macromolecular Symposia 287 #1 (2010)
Abstract
TiO2-Functionalized Sulphur Containing Polyimides for Optical
Applications
(p 148-154)
Macromolecular Symposia 287 #1 (2010)
Abstract
Evolution of Fiber Morphologies during Poly (acrylonitrile)
Electrospinning
(p 155-161)
Macromolecular Symposia 287 #1 (2010)
Abstract
Using Neural Networks or Linear Models to Predict
the Characteristics of Microcapsules Containing Phase Change Materials
(p 162-167)
Macromolecular Symposia 287 #1 (2010)
Abstract
Impact of Low-Dosage Inhibitors on Clathrate
Hydrate Stability
(p 168-176)
Macromolecular Symposia 287 #1 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
28.
Macromolecules 43 #4 (2010)
(Titles and Abstracts)
Transmission Electron Microtomography and Polymer Nanostructures
(1675–1688)
Macromolecules 43 #4 (2010)
Same Ligand, Different Metals: Diiodo−Salan Complexes of the Group 4 Triad in
Isospecific Polymerization of 1-Hexene and Propylene
(1689–1691)
Macromolecules 43 #4 (2010)
Synthesis of Proton Conductive Polymers with High Electrochemical Selectivity
(1692–1694)
Macromolecules 43 #4 (2010)
Catalytic Cu(II)−Amine Terminated Poly(amidoamine) Dendrimer Complexes for
Aerobic Oxidative Polymerization To Form Poly(2,6-dimethyl-1,4-phenylene oxide)
in Water
(1695–1698)
Macromolecules 43 #4 (2010)
Synthesis of Precision Ionic Polyolefins Derived from Ionic Liquids
(1699–1701)
Macromolecules 43 #4 (2010)
Spectroscopic Evidence of Melting of Ordered Structures in the Aged Glassy
Poly(l-lactide)
(1702–1705)
Macromolecules 43 #4 (2010)
Formation of Side-Chain Hetero-Polypseudorotaxane Composed of α- and
β-Cyclodextrins with a Water-Soluble Polymer Bearing Two Recognition Sites
(1706–1713)
Macromolecules 43 #4 (2010)
A Fluorene−Oxadiazole Copolymer for White Light-Emitting Electrochemical Cells
(1714–1718)
Macromolecules 43 #4 (2010)
Electrophilic Reactivity of the α,α-Dimethylbenzyl (Cumyl) Cation
(1719–1723)
Macromolecules 43 #4 (2010)
Structure−Reactivity Scales in Carbocationic Polymerizations: The Case of
α-Methylstyrene
(1724–1729)
Macromolecules 43 #4 (2010)
Reversible Addition−Fragmentation Chain Transfer in Microemulsions: Effect of
Chain Transfer Agent Aqueous Solubility
(1730–1738)
Macromolecules 43 #4 (2010)
One-Pot Syntheses of Amphiphilic Centipede-like Brush Copolymers via Combination
of Ring-Opening Polymerization and “Click” Chemistry
(1739–1746)
Macromolecules 43 #4 (2010)
Facile Synthesis of Well-Defined Coil−Rod−Coil Block Copolymer Composed of
Regioregular Poly(3-hexylthiophene) via Anionic Coupling Reaction
(1747–1752)
Macromolecules 43 #4 (2010)
Synthesis of Thermoresponsive Shell Cross-Linked Micelles via Living Cationic
Polymerization and UV Irradiation
(1753–1760)
Macromolecules 43 #4 (2010)
Introducing Polar Monomers into Polyisobutylene by Living Cationic
Polymerization: Structural and Kinetic Effects
(1761–1770)
Macromolecules 43 #4 (2010)
Thermoresponsive Core−Shell Brush Copolymers with Poly(propylene
oxide)-block-poly(ethylene oxide) Side Chains via a “Grafting from” Technique
(1771–1777)
Macromolecules 43 #4 (2010)
Synthesis of Linear High Molar Mass Glycidol-Based Polymers by Monomer-Activated
Anionic Polymerization
(1778–1784)
Macromolecules 43 #4 (2010)
Intelligent Build-Up of Complementarily Reactive Diblock Copolymers via Dynamic
Covalent Exchange toward Symmetrical and Miktoarm Star-like Nanogels
(1785–1791)
Macromolecules 43 #4 (2010)
Synthesis of Hollow Polymer Nanocapsules Exploiting Gold Nanoparticles as
Sacrificial Templates
(1792–1799)
Macromolecules 43 #4 (2010)
Soluble and Thermally Stable Polysulfones Prepared by the Regiospecific and
Alternating Radical Copolymerization of 2,4-Hexadiene with Sulfur Dioxide
(1800–1806)
Macromolecules 43 #4 (2010)
Toughening of Polylactide with Polymerized Soybean Oil
(1807–1814)
Macromolecules 43 #4 (2010)
Ring-Opening Metathesis Block Copolymerization of Amino Acid Functionalized
Norbornene Monomers. Effects of Solvent and pH on Micelle Formation
(1815–1822)
Macromolecules 43 #4 (2010)
Role of Chain Transfer Agents in Free Radical Polymerization Kinetics
(1823–1835)
Macromolecules 43 #4 (2010)
Synthesis and Characterization of Highly Refractive Polyimides Derived from
Thiophene-Containing Aromatic Diamines and Aromatic Dianhydrides
(1836–1843)
Macromolecules 43 #4 (2010)
Silacyclobutane-Mediated Re-Activation of “Sleeping” Polyvinylferrocene
Macro-Anions: A Powerful Access to Novel Metalloblock Copolymers
(1844–1854)
Macromolecules 43 #4 (2010)
Microencapsulation of a Reactive Liquid-Phase Amine for Self-Healing Epoxy
Composites
(1855–1859)
Macromolecules 43 #4 (2010)
CdSe/ZnS Nanoparticle Composites with Amine-Functionalized Polyfluorene
Derivatives for Polymeric Light-Emitting Diodes: Synthesis, Photophysical
Properties, and the Electroluminescent Performance
(1860–1866)
Macromolecules 43 #4 (2010)
A New, More Versatile, Optical Switching Helical Polycarbodiimide Capable of
Thermally Tuning Polarizations ±359°
(1867–1873)
Macromolecules 43 #4 (2010)
Hierarchical Self-Assembly and Dynamics of a Miktoarm Star chimera Composed of
Poly(γ-benzyl-l-glutamate), Polystyrene, and Polyisoprene
(1874–1881)
Macromolecules 43 #4 (2010)
Chiro-optical Materials Based on a Racemic Polymer
(1882–1887)
Macromolecules 43 #4 (2010)
Morphologies of Cross-Linked Segmented Polyurethanes. Evolution during
Maturation and Consequences on Elastic Properties and Thermal Compressive
Fatigue
(1888–1900)
Macromolecules 43 #4 (2010)
Late-State Ripening Dynamics of a Polymer/Clay Nanocomposite
(1901–1906)
Macromolecules 43 #4 (2010)
A Dielectric Study of Oligo- and Poly(propylene glycol)
(1907–1914)
Macromolecules 43 #4 (2010)
Temperature-Dependent Structure of α-CD/PEO-Based Polyrotaxanes in Concentrated
Solution in DMSO: Kinetics and Multiblock Copolymer Behavior
(1915–1921)
Macromolecules 43 #4 (2010)
An in Situ X-ray Structural Study of Olefin Block and Random Copolymers under
Uniaxial Deformation
(1922–1929)
Macromolecules 43 #4 (2010)
Analysis of Molecular Aggregation Structures of Fully Aromatic and Semialiphatic
Polyimide Films with Synchrotron Grazing Incidence Wide-Angle X-ray Scattering
(1930–1941)
Macromolecules 43 #4 (2010)
Symmetry Transition in Thin Films of Diblock Copolymer/Homopolymer Blends
(1942–1949)
Macromolecules 43 #4 (2010)
Temperature-Induced, Reversible Swelling Transitions in Multilayers of a
Cationic Triblock Copolymer and a Polyacid
(1950–1957)
Macromolecules 43 #4 (2010)
Phase Transitions of Block Copolymer Film on Homopolymer-Grafted Substrate
Hyungju Ahn, Changhak Shin, Byeongdu Lee and Du Yeol Ryu
pp 1958–1963
Temperature-Induced Control of Conformation and Conjugation Length in
Water-Soluble Fluorescent Polythiophenes
(1964–1974)
Macromolecules 43 #4 (2010)
Poly(N-isopropylacrylamide) Gel Prepared Using a Hydrophilic Polyrotaxane-Based
Movable Cross-Linker
(1975–1980)
Macromolecules 43 #4 (2010)
Hydrogen-Bond Engineering in Supramolecular Polymers: Polarity Influence on the
Self-Assembly of Benzene-1,3,5-tricarboxamides
(1981–1991)
Macromolecules 43 #4 (2010)
Pegylated and Thermosensitive Polyion Complex Micelles by Self-Assembly of Two
Oppositely and Permanently Charged Diblock Copolymers
(1992–2001)
Macromolecules 43 #4 (2010)
Interchain Hydrogen-Bonding-Induced Association of Poly(acrylic
acid)-graft-poly(ethylene oxide) in Water
(2002–2008)
Macromolecules 43 #4 (2010)
SAXS Investigation of the Effect of Temperature on the Multiscale Structure of a
Macroporous Poly(N-isopropylacrylamide) Gel
(2009–2017)
Macromolecules 43 #4 (2010)
Path-Dependent Morphology and Relaxation Kinetics of Highly Amphiphilic Diblock
Copolymer Micelles in Ionic Liquids
(2018–2027)
Macromolecules 43 #4 (2010)
Understanding the Lithium Transport within a Rouse-Based Model for a PEO/LiTFSI
Polymer Electrolyte
(2028–2036)
Macromolecules 43 #4 (2010)
Micelles of Coil−Comb Block Copolymers in Selective Solvents: Competition of
Length Scales
(2037–2041)
Macromolecules 43 #4 (2010)
A Model of a Homopolymer Brush as a Switch
(2042–2047)
Macromolecules 43 #4 (2010)
Rheology of Carbon Nanotube Networks During Gelation
(2048–2053)
Macromolecules 43 #4 (2010)
Polymer Adsorption from Bulk Solution onto Planar Surfaces: Effect of Polymer
Flexibility and Surface Attraction in Good Solvent
(2054–2068)
Macromolecules 43 #4 (2010)
Effects of Competition on Selective Adsorption of Heteropolymers onto
Heterogeneous Surfaces
(2069–2075)
Macromolecules 43 #4 (2010)
Modeling of Bottle-Brush Polymer Adsorption onto Mica and Silica Surfaces:
Effect of Side-Chain Length
(2076–2083)
Macromolecules 43 #4 (2010)
High Pressure Phase Diagram of an Aqueous PEO-PPO-PEO Triblock Copolymer System
via Probe Diffusion Measurements
(2084–2087)
Macromolecules 43 #4 (2010)
Perpendicular Orientation of Cylindrical Microdomains in Extruded Triblock
Copolymer
(2088–2091)
Macromolecules 43 #4 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
29.
Microporous
and Mesoporous Materials 130. #1-3 (2010)
(Titles and Abstracts) (R)
Size effect in the characterization of
microporous activated nanostructured carbon
(21-25)
Microporous
and Mesoporous Materials 130. #1-3 (2010)
Computational study of the effect of organic
linkers on natural gas upgrading in metal–organic frameworks
(76-82)
Microporous
and Mesoporous Materials 130. #1-3 (2010)
An easy-to-implement multi-scale computation of
permeability coefficient for porous materials
(274-279)
Microporous
and Mesoporous Materials 130. #1-3 (2010)
Mesoporous activated carbon from waste tyre
rubber for dye removal from effluents
(287-294)
Microporous
and Mesoporous Materials 130. #1-3 (2010)
Soluble starch scaffolds with uniaxial aligned
channel structure for in situ synthesis of hierarchically porous silica ceramics
(327-332)
Microporous
and Mesoporous Materials 130. #1-3 (2010)
Electrorheology of a mesoporous silica having
conducting polypyrrole inside expanded pores
(338-343)
Microporous
and Mesoporous Materials 130. #1-3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
30.
Modern Plastics (2010)
(Titles and Abstracts)
Weekly
Trade
Magazine
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
31.
Nanotechnology 21 #10 (2010)
(Titles and Abstracts; Full PDF versions of Articles are available free
for 30 days after publication)
Combination of adenovirus and cross-linked low
molecular weight PEI improves efficiency of gene transduction
(# 105106)
Nanotechnology 21 #10 (2010)
Abstract
Morphology control of a polythiophene–fullerene bulk
heterojunction for enhancement of the high-temperature stability of solar cell
performance by a new donor–acceptor diblock copolymer
(# 105201)
Nanotechnology 21 #10 (2010)
Abstract
Dynamic synergy of graphitic nanoplatelets and
multi-walled carbon nanotubes in polyetherimide nanocomposites
(# 105702)
Nanotechnology 21 #10 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
32.
Plasma
Processes
and Polymers
7 #2 (2010)
(Titles and Abstracts)
The Substrate and Composition Dependence of
Plasma Polymer Stability
(p 102-106)
Plasma Processes and Polymers 7 #2 (2010)
Abstract
Fluorine Plasma Treatments of Polypropylene
Films, 1 - Surface Characterization
(p 107-122)
Plasma Processes and Polymers 7 #2 (2010)
Abstract
Fluorine Plasma Treatments of Poly(propylene)
Films, 2 - Modeling Reaction Mechanisms and Scaling
(p 123-150)
Plasma Processes and Polymers 7 #2 (2010)
Abstract
Plasma-Polymerized Films for Biochip Design
(p 151-162)
Plasma Processes and Polymers 7 #2 (2010)
Abstract
Deposition of Functional Organic Thin Films by
Pulsed Plasma Polymerization: A Joint Theoretical and Experimental Study
(p 172-181)
Plasma Processes and Polymers 7 #2 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
33.
Polymer - Plastics Technology and Engineering 49 #3 (2010)
(Titles and Abstracts)
A Study on Phase Separation of PA-PDMS Composites Dependent on Molecular Weight
(223 – 227)
Polymer - Plastics Technology and Engineering 49 #3 (2010)
The Effect of Electron Beam (EB) Irradiation in Presence of TMPTA on Cure
Characteristics and Mechanical Properties of Styrene Butadiene Rubber/Recycled
Acrylonitrile-Butadiene Rubber (SBR/NBRr) Blends
( 228 – 236)
Polymer - Plastics Technology and Engineering 49 #3 (2010)
Density and Cell Morphology of Rigid Foam PVC-Clay Nanocomposites
(237 – 243)
Polymer - Plastics Technology and Engineering 49 #3 (2010)
Interacting Blends of Flame-Retardant Acrylated Poly(Ester-Amide) Resins Based
on Brominated Epoxy Resin with Methyl Methacrylate and Styrene
(244 – 249)
Polymer - Plastics Technology and Engineering 49 #3 (2010)
Preparation and Characterization of Polyimide-Silica Hybrid Thin Films
(250 – 253)
Polymer - Plastics Technology and Engineering 49 #3 (2010)
Response Surface Analysis for Competition between Thermooxidation and
Polycondensation Reactions of PET Flakes. Part 1: Low Vacuum Atmosphere
(254 – 259)
Polymer - Plastics Technology and Engineering 49 #3 (2010)
Multiwall Carbon Nanotube-Filled Natural Rubber: The Effects of Filler Loading
and Mixing Method
(260 – 266)
Polymer - Plastics Technology and Engineering 49 #3 (2010)
Effect of Polymer Concentration on Sustained Release Microparticles of Metformin
Hydrochloride Prepared by Using Spray Dryer
(267 – 271)
Polymer - Plastics Technology and Engineering 49 #3 (2010)
Effect of Pro-degradant Additives Concentration on Aging Properties of
Polypropylene Films
(272 – 278)
Polymer - Plastics Technology and Engineering 49 #3 (2010)
The Preparation and Characterization of Glycerol Pseudo-Thermoplastic
Starch/Glycerol Pseudo-Thermoplastic Polyvinyl Alcohol (GTPS/GTPVA)
Biodegradable Films Using the Solution Casting Method
(279 – 284)
Polymer - Plastics Technology and Engineering 49 #3 (2010)
Using of p-Phenylenediamine as Modifier of Montmorrilonite for Preparation of
Epoxy-Clay Nanocomposites: Morphology and Solvent Resistance Properties
(285 – 291)
Polymer - Plastics Technology and Engineering 49 #3 (2010)
Preparation and Rheological Characterization of Ultra High Molecular Weight
Polyethylene/Montmorillonite Nanocomposites
(292 – 295)
Polymer - Plastics Technology and Engineering 49 #3 (2010)
Effect of Acrylonitrile-Butadiene-Styrene High-Rubber Powder and Strain Rate on
the Morphology and Mechanical Properties of Acrylonitrile-Butadiene-Styrene/Poly
(Methyl Methacrylate) Blends
(296 – 304)
Polymer - Plastics Technology and Engineering 49 #3 (2010)
The ECP Grafting of Kevlar Fiber on Interfacial Adhesion of Polypropylene
Composite
(305 – 308)
Polymer - Plastics Technology and Engineering 49 #3 (2010)
Preparation and Properties of Poly(lactide-co-glycolide)/Bone Meals Composite
Materials
(309 – 315)
Polymer - Plastics Technology and Engineering 49 #3 (2010)
Structural Basis for Intumescence – Part III – Thermal Degradation Study of
Intumescent Polymers Containing Spirophosphorus Moiety in the Backbone
(316 – 324)
Polymer - Plastics Technology and Engineering 49 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
34.
Transport in Porous Media 82 #1 (2010)
(Titles and Abstracts) (R)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
35.
International Journal of Solids and Structures 47 #7-8 (2010)
(Titles and Abstracts)
In-plane fracture of laminated fiber reinforced
composites with varying fracture resistance: Experimental observations and
numerical crack propagation simulations
(901-911)
International Journal of Solids and Structures 47 #7-8 (2010)
An adhesive wear model of fractal surfaces in
normal contact
(912-921)
International Journal of Solids and Structures 47 #7-8 (2010)
Analytical and experimental study of a circular
membrane in Hertzian contact with a rigid substrate
(969-977)
International Journal of Solids and Structures 47 #7-8 (2010)
A three-parameter elastic foundation model for
interface stresses in curved beams externally strengthened by a thin FRP plate
(998-1006)
International Journal of Solids and Structures 47 #7-8 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
36.
International
Journal of Thermal Sciences
49 #4 (2010)
(Titles and Abstracts)
Viscous dissipation and thermoconvective
instabilities in a horizontal porous channel heated from below
(621-630)
International
Journal of Thermal Sciences
49 #4 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
37.
International
Journal of Thermophysics 31 #1 (2010)
(Titles and Abstracts)
Effect of Poly(Ethylene Glycol) Coating on the Acoustic Properties of
Biocompatible Magnetic Fluid
(70-76)
International Journal of Thermophysics 31 #1 (2010)
Photochemical Activity of Merocyanine Dyes
(172-179)
International Journal of Thermophysics 31 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
38.
Inverse
Problems
26 #3 (2010)
(Titles and Abstracts; Full PDF versions of Articles are available free for 30
days after publication)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
39.
Inverse Problems in Science and Engineering 18, #1 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
40.
The
Journal of Adhesion
86 #1 (2010)
(Titles
and Abstracts)
Inkjet Printing of Cyanoacrylate Adhesive
(1 – 9)
The
Journal of Adhesion
86 #1 (2010)
Towards the Recombinant Production of Mussel Byssal Collagens
(10 – 24)
The
Journal of Adhesion
86 #1 (2010)
Investigation of Adsorption and Cross-Linking of a Mussel Adhesive Protein Using
Attenuated Total Internal Reflection Fourier Transform Infrared Spectroscopy (ATR-FTIR)
(25 – 38)
The
Journal of Adhesion
86 #1 (2010)
Adhesion of a Fibrillar Interface on Wet and Rough Surfaces
(39 – 61)
The
Journal of Adhesion
86 #1 (2010)
Microscale Patterning of Two-Component Biomedical Hydrogel
(62 – 71)
The
Journal of Adhesion
86 #1 (2010)
Unifying Design Strategies in Demosponge and Hexactinellid Skeletal Systems
(72 – 95)
The
Journal of Adhesion
86 #1 (2010)
Molecular Design of Barnacle Cement in Comparison with Those of Mussel and
Tubeworm
(96 – 110)
The
Journal of Adhesion
86 #1 (2010)
Structural and Biophysical Characterization of a Cyclic Bioadhesive with Cell
Attachment Ability
(111 – 130)
The
Journal of Adhesion
86 #1 (2010)
Engineering Therapeutic Nanocarriers with Optimal Adhesion for Targeting
(131 – 159)
The
Journal of Adhesion
86 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
41.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
42.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
43.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
44.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
45.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
46.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
47.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
48.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
49.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
50.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
51.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
52.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
53.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
54.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
55.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
56.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
57.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
58.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
59.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
60.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
61.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
62.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
63.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
64.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
65.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
66.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
67.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
68.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
67.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
70.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Roger D.
Corneliussen
Editor
Telephone: 610 883 0055
rcorneliussen@4spe.org
www.maropolymeronline.com
Copyright 2009 by Roger D. Corneliussen