Copyright 2010 by Roger D. Corneliussen
Below are links to the new articles by journals. A click should take you to the journal website. This is a great variation in where one ends up. In some cases, a click will take you to the issue in other cases a click will take you to the website and you must do a few more clicks to get to the issue. This is controlled by the publisher and not Maro. Fortunately, with a little practice, this should not be a serious problem. (RDC)
Polymer
Track (News)
Updated daily
Week 9 (3/1-3/5)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
01.
Advanced Drug Delivery Reviews 62 #4-5 (2010)
(Titles and Abstracts)
Pure drug and polymer based nanotechnologies
for the improved solubility, stability, bioavailability and targeting of
anti-HIV drugs
(491-502)
Advanced Drug Delivery Reviews 62 #4-5 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
02.
Advanced Functional Materials 20 #5 (2010)
(Titles and Abstracts)
Oxygen-Generating Gel Systems Induced by Visible
Light
(p 708-714)
Advanced Functional Materials 20 #5 (2010)
Abstract
Particle-Stabilized Materials: Dry Oils and
(Polymerized) Non-Aqueous Foams
(p 732-737)
Advanced Functional Materials 20 #5 (2010)
Abstract
Characterization of a Novel Fiber Composite
Material for Mechanotransduction Research of Fibrous Connective Tissues
(p 738-747)
Advanced Functional Materials 20 #5 (2010)
Abstract
Abrupt Morphology Change upon Thermal Annealing
in Poly(3-Hexylthiophene)/Soluble Fullerene Blend Films for Polymer Solar Cells
(p 748-754)
Advanced Functional Materials 20 #5 (2010)
Abstract
Graphene-Polymer Nanofiber Membrane for Ultrafast
Photonics
(p 782-791)
Advanced Functional Materials 20 #5 (2010)
Abstract
Alkyl-Chain-Length-Independent Hole Mobility via
Morphological Control with Poly(3-alkylthiophene) Nanofibers
(p 792-802)
Advanced Functional Materials 20 #5 (2010)
Abstract
Silica-Based, Organically Modified Host Material
for Waveguide Structuring by Two-Photon-Induced Photopolymerization
(p 811-819)
Advanced Functional Materials 20 #5 (2010)
Abstract
Preparation and Characterization of a pH- and
Thermally Responsive Poly(N-isopropylacrylamide-co-acrylic
acid)/Porous SiO2 Hybrid
(p 826-833)
Advanced Functional Materials 20 #5 (2010)
Abstract
Enhanced Thermal Stability and Efficiency of
Polymer Bulk-Heterojunction Solar Cells by Low-Temperature Drying of the Active
Layer
(p 834-839)
Advanced Functional Materials 20 #5 (2010)
Abstract
Flexible Silk-Inorganic Nanocomposites: From
Transparent to Highly Reflective
(p 840-846)
Advanced Functional Materials 20 #5 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
03.
Advanced Materials 22 #9 (2010)
(Titles and Abstracts)
HPW/MCM-41 Phosphotungstic Acid/Mesoporous Silica
Composites as Novel Proton-Exchange Membranes for Elevated-Temperature Fuel
Cells
(p 971-976)
Advanced Materials 22 #9 (2010)
Abstract
Ultrasensitive Piezoresistive All-Organic
Flexible Thin Films
(p 977-981)
Advanced Materials 22 #9 (2010)
Abstract
Designed Suppression of Aggregation in Polypyrene:
Toward High-Performance Blue-Light-Emitting Diodes
(p 990-993)
Advanced Materials 22 #9 (2010)
Abstract
Bipolar Charge Transport in Fullerene Molecules
in a Bilayer and Blend of Polyfluorene Copolymer and Fullerene
(p 1008-1011)
Advanced Materials 22 #9 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
04.
Advances in Colloid and Interface Science 154 #1-2 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
05.
The Analyst 135 #3 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
06. Analytical
Chemistry
82, #5 (2010)
(Titles and Abstracts)
Efficient Separation of Small Molecules Using a Large Surface Area
Hypercrosslinked Monolithic Polymer Capillary Column
(1621–1623)
Analytical Chemistry 82, #5 (2010)
Monitoring the 3D Nanostructures of Bulk Heterojunction Polymer Solar Cells
Using Confocal Lifetime Imaging
(1669–1673)
Analytical Chemistry 82, #5 (2010)
Visualizing the Lower Critical Solution Temperature Phase Transition of
Individual Poly(Nipam)-Based Hydrogel Particles Using Near-Infrared
Multispectral Imaging Microscopy
(1698–1704)
Analytical Chemistry 82, #5 (2010)
Determination of Individual Diffusion Coefficients in Evolving Binary Mixtures
by Taylor Dispersion Analysis: Application to the Monitoring of Polymer Reaction
(1793–1802)
Analytical Chemistry 82, #5 (2010)
Development of Hapten-Linked Microimmunoassays on Polycarbonate Discs
(1954–1963)
Analytical Chemistry 82, #5 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
07.
Analytical
Letters
43 #5 (2010)
(Titles and Abstracts)
Water Compatible Molecularly Imprinted Polymer Microspheres for Extraction of
Ampicillin in Foods
(757 – 767)
Analytical
Letters
43 #5 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
08.
Appliance Design (March 2010)
(Titles, Abstracts
and Articles)
Trade
Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
09.
Applied Clay Science 48 #1-2 (2010)
(Titles
and Abstracts)
Nanoscale organic/inorganic hybrids based on
self-organized dendritic macromolecules on montmorillonites
(103-110)
Applied Clay Science 48 #1-2 (2010)
Synthesis and characterization of transparent
copolyimide films containing CF3 groups: Comparison with copolyimide
nanocomposites
(117-126)
Applied Clay Science 48 #1-2 (2010)
Montmorillonite as a component of polysulfone
nanocomposite membranes
(127-132)
Applied Clay Science 48 #1-2 (2010)
Preparation of layered double hydroxides
intercalated with organic anions and their application in LDH/poly(butyl
methacrylate) nanocomposites
(260-270)
Applied Clay Science 48 #1-2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
10.
Automotive Engineering International
(February 2010)
(Titles, Abstracts and Articles)
Trade Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
11.
Biodegradation 21 #2
(2010)
Titles and Abstracts
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
12.
Biomaterials 31 #13 (2010)
(Titles
and Abstracts)
In vitro evaluation of the long-term stability
of polyimide as a material for neural implants
(3449-3458)
Biomaterials 31 #13 (2010)
A circular cross-section PDMS microfluidics
system for replication of cardiovascular flow conditions
(3459-3464)
Biomaterials 31 #13 (2010)
The electron beam deposition of titanium on
polyetheretherketone (PEEK) and the resulting enhanced biological properties
(3465-3470)
Biomaterials 31 #13 (2010)
Biocompatible, hyaluronic acid modified
silicone elastomers
(3471-3478)
Biomaterials 31 #13 (2010)
Template synthesized poly(
-caprolactone)
nanowire surfaces for neural tissue engineering
(3492-3501)
Biomaterials 31 #13 (2010)
Biodegradable magnetic-fluorescent magnetite/poly(
(3502-3511)
Biomaterials 31 #13 (2010)
The effect of fiber alignment and heparin
coating on cell infiltration into nanofibrous PLLA scaffolds
(3536-3542)
Biomaterials 31 #13 (2010)
Heparin-based hydrogel as a matrix for
encapsulation and cultivation of primary hepatocytes
(3596-3603)
Biomaterials 31 #13 (2010)
Rat hepatocyte aggregate formation on discrete
aligned nanofibers of type-I collagen-coated poly(
(3604-3612)
Biomaterials 31 #13 (2010)
Poly(lactide-co-glycolide)
nanoparticle assembly for highly efficient delivery of potent therapeutic agents
from medical devices
(3631-3642)
Biomaterials 31 #13 (2010)
Use of vitamin E to protect cross-linked UHMWPE
from oxidation
(3643-3648)
Biomaterials 31 #13 (2010)
The performance of a hemostatic agent based on
oxidized regenerated cellulose – polyglactin 910 composite in a liver defect
model in immunocompetent and athymic rats
(3649-3656)
Biomaterials 31 #13 (2010)
Biodegradable polyamino acid-based polycations
as safe and effective gene carrier minimizing cumulative toxicity
(3707-3714)
Biomaterials 31 #13 (2010)
Bioactive hydrogels made from step-growth
derived PEG–peptide macromers
(3736-3743)
Biomaterials 31 #13 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
13.
British Plastics and Rubber (March 2010)
(Titles and Abstracts) (H)
Trade Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
14.
Carbon 48 #6 (2010)
(Titles and Abstracts)
Ordered mesoporous carbide derived carbons for
high pressure gas storage
(1707-1717)
Carbon 48 #6 (2010)
Electrochemical properties of graphene
nanosheet/carbon black composites as electrodes for supercapacitors
(1731-1737)
Carbon 48 #6 (2010)
Multi-walled carbon nanotubes covalently
functionalized with polyhedral oligomeric silsesquioxanes for optical limiting
(1738-1742)
Carbon 48 #6 (2010)
Raman microscopy of residual strains in carbon
nanotube/epoxy composites
(1750-1756)
Carbon 48 #6 (2010)
Fabrication of activated carbons with
well-defined macropores derived from sulfonated poly(divinylbenzene) networks
(1757-1766)
Carbon 48 #6 (2010)
Specific anion and cation capacitance in porous
carbon blacks
(1767-1778)
Carbon 48 #6 (2010)
Partially embedded highly dispersed Pt
nanoparticles in mesoporous carbon with enhanced leaching stability
(1788-1798)
Carbon 48 #6 (2010)
Study of fire retardant behavior of carbon
nanotube membranes and carbon nanofiber paper in carbon fiber reinforced epoxy
composites
(1799-1806)
Carbon 48 #6 (2010)
Dispersion, interfacial interaction and
re-agglomeration of functionalized carbon nanotubes in epoxy composites
(1824-1834)
Carbon 48 #6 (2010)
Enhancing the thermal conductivity of
polyacrylonitrile- and pitch-based carbon fibers by grafting carbon nanotubes on
them
(1849-1857)
Carbon 48 #6 (2010)
pH-dependent water penetration through CNT
sub-layers arranged on the polycarbonate membrane filters
(1858-1861)
Carbon 48 #6 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
15.
Chemical Communications #10 (2010)
(Titles, Abstracts and Articles)
Integrated structural control of cage-type mesoporous platinum possessing both
tunable large mesopores and variable surface structures by block
copolymer-assisted Pt deposition in a hard-template
(1827 - 1829)
Chemical Communications #10 (2010)
Highly fluorescent water-soluble polyglycerol-dendronized perylene bisimide dyes
(1884 - 1886)
Chemical Communications #10 (2010)
Tetrachloro-tetra(perylene bisimides): an approach towards N-type
graphene nanoribbons
(1926 - 1928)
Chemical Communications #10 (2010)
Amphiphilic block copolymer nano-fibers via RAFT-mediated polymerization
in aqueous dispersed system
(1950 - 1952)
Chemical Communications #10 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
16.
Chemical Engineering (MARCH 2010)
(Titles and Abstracts) (T)
Trade Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
17.
Chemical Engineering Progress 106 #3
(2010)
(Titles and Abstracts) (T)
Trade Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
18.
Chemical Physics Letters 488 #1-3 (2010)
(Titles and Abstracts)
Femtosecond pump-broadband probe study of
primary doped polyaniline – The evidence of neutral primary photoexcitations
(38-43)
Chemical Physics Letters 488 #1-3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
19.
Chemical
Society Reviews 39 #3 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
20.
Chemical
Week
Titles and Abstracts) Weekly (H)
Trade
Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
21.
Chemistry of Materials 22 #5 (2010)
(Titles
and Abstracts)
Phenyl vs Alkyl Polythiophene: A Solar Cell Comparison Using a Vinazene
Derivative as Acceptor
(1673–1679)
Chemistry of Materials 22 #5 (2010)
Assemblies of Titanium Dioxide-Polystyrene Hybrid Nanoparticles for Dielectric
Applications
(1749–1759)
Chemistry of Materials 22 #5 (2010)
Assemblies of Titanium Dioxide-Polystyrene Hybrid Nanoparticles for Dielectric
Applications
(1749–1759)
Chemistry of Materials 22 #5 (2010)
Exploitable Flexible Honeycomb Structured Porous Films from Sol−Gel
Cross-Linkable Silicone Based Random Branched Copolymers
(1878–1891)
Chemistry of Materials 22 #5 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
22.
Chinese Physics B 19 #2 (2010)
(Titles
and Abstracts; Full PDF versions of Articles are available free for 30 days after
publication)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
23.
Combustion Science and Technology 182 #3 (2010)
(Titles
and Abstracts) S
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
24.
Composites Part B: Engineering 41 #3 (2010)
(Titles
and Abstracts)
Evaluating and proposing models of circular
concrete columns confined with different FRP composites
(199-213)
Composites Part B: Engineering 41 #3 (2010)
Damping, tensile, and impact properties of
superelastic shape memory alloy (SMA) fiber-reinforced polymer composites
(214-222)
Composites Part B: Engineering 41 #3 (2010)
Biodegradation of a silkworm silk/PLA composite
( 223-228)
Composites Part B: Engineering 41 #3 (2010)
Predicting the longitudinal elastic modulus of
braided tubular composites using a curved unit-cell geometry
(229-235)
Composites Part B: Engineering 41 #3 (2010)
Comparison of tensile and compressive
characteristics of vinyl ester/glass microballoon syntactic foams
(236-245)
Composites Part B: Engineering 41 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
25.
Construction
and Building Materials
24 #5 (2010)
(Titles and Abstracts)
Influence of aluminate coupling agent on
low-temperature rheological performance of asphalt mastic
(650-659)
Construction
and Building Materials
24 #5 (2010)
Long-term performance of recycled PET fibre-reinforced
cement composites
(660-665)
Construction
and Building Materials
24 #5 (2010)
Physical and mechanical properties of durable
sisal fiber–cement composites
(777-785)
Construction
and Building Materials
24 #5 (2010)
Laboratory evaluation of permeability and
strength of polymer-modified pervious concrete
(818-823)
Construction
and Building Materials
24 #5 (2010)
Interaction effects of crumb rubber modified
asphalt binders
(824-831)
Construction
and Building Materials
24 #5 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
26.
Corrosion Science 52 #4 (2010)
(Titles and Abstracts)
The role of zinc aluminum phosphate
anticorrosive pigment in Protective Performance and cathodic disbondment of
epoxy coating
(1291-1296)
Corrosion Science 52 #4 (2010)
Inhibitive and adsorption behaviour of
carboxymethyl cellulose on mild steel corrosion in sulphuric acid solution
(1317-1325)
Corrosion Science 52 #4 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
27.
Dalton Transactions #10 (2010)
(Titles
and Abstracts)
Propylene polymerization to high molecular weight atactic polypropylene and
copolymerization with 1-hexene using monocyclopentadienyl titanium catalysts
(2525 - 2535)
Dalton Transactions #10 (2010)
Donnan-exclusion-driven distribution of catalytic ferromagnetic nanoparticles
synthesized in polymeric fibers
(2579 - 2586)
Dalton Transactions #10 (2010)
Anion variation on a cobalt(III) complex of salen-type ligand
tethered by four quaternary ammonium salts for CO2/epoxide
copolymerization
(2622 - 2630)
Dalton Transactions #10 (2010)
Functionalized 1,2,3-triazoles as building blocks for photoluminescent POLOs
(polymers of oligomers) of copper(I)
(2631 - 2636)
Dalton Transactions #10 (2010)
Coordination polymers containing ferrocene backbone. Synthesis, structure and
electrochemistry
(2684 - 2691)
Dalton Transactions #10 (2010)
**************************************************
Dalton Transactions #11 (2010)
(Titles
and Abstracts)
Synthesis and characterization of [Pb{Se2P(OiPr)2}2]n
pseudo polymorphs: Polymeric, single source precursor enabling preparation of
shape-controlled lead selenide structures
(2821 - 2830)
Dalton Transactions #11 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
28.
Doklady Chemistry 430 #2 (2010)
(Titles only)
Pseudofragmental descriptors based on combinations of atomic properties for
prediction of physical properties of polymers in quantitative structure—property
relationship studies
(39-42)
Doklady Chemistry 430 #2 (2010)
Metal extraction from nitric acid solutions by the macrocyclic endoreceptor
dicyclohexyl-18-crown-6 immobilized in a polymer matrix
(54-57)
Doklady Chemistry 430 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
29.
The Engineering Economist 55 #1
(2010)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
30.
Environmental
Science & Technology 44 #5 (2010)
(Titles
and Abstracts)
Immobilized Redox Mediators on Anion Exchange Resins and Their Role on the
Reductive Decolorization of Azo Dyes
(1747–1753)
Environmental Science & Technology 44 #5 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
31.
e-Polymers (3/4/2010) (24)
(Titles, Abstracts and Articles)
024[2010] MgH2/PEG alkoxide initiating system for ring opening
polymerization of lactone and lactide
e-Polymers (3/4/2010) (24)
[Abstract]
023[2010] Nucleation loci in the ring-opening polymerization of
octa-methyl-cyclo-tetrasiloxane in Winsor I system with dodecylbenzene sulfonic
acid sodium salt and sulfuric acid
e-Polymers (3/4/2010) (24)
[Abstract]
022[2010] Thermal degradation behaviors of flame-retardant polycarbonate
containing potassium diphenyl sulfonate and polymethylphenylsilsesquioxane
e-Polymers (3/4/2010) (24)
[Abstract]
021[2010] Characterization of orientation in polyethylene by scratch testing
e-Polymers (3/4/2010) (24)
[Abstract]
020[2010] Epoxy-based nanocomposites with amine modified single walled
carbon nanotubes
e-Polymers (3/4/2010) (24)
[Abstract]xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
32.
European Coatings, March (2010)
(Titles, Abstracts and Articles)
Trade
Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
33.
Injection Molding Magazine (March 2010)
(Titles, Abstracts and
Articles)
Trade
Magazine
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
34.
Instrumentation Science and Technology 38 #2
(2010)
(Titles and Abstracts)
PVC MATRIX MEMBRANE SENSORS FOR POTENTIOMETRIC DETERMINATION OF ARECOLINE
(165 – 177)
Instrumentation Science and Technology 38 #2
(2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
35.
International Biodeterioration & Biodegradation 64 #2 (2010)
(Titles and Abstracts)
Enzyme activities and decolourization of single
and mixed azo dyes by the white-rot fungus
Phanerochaete chrysosporium
(146-150)
International Biodeterioration & Biodegradation 64 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
36.
International Journal of Engineering Science 48 #5 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
37.
International Journal of Heat and Fluid Flow 31 #2 (2010)
(Titles
and Abstracts)
Wake structure for flow past and through a
porous square cylinder
(141-153)
International Journal of Heat and Fluid Flow 31 #2 (2010)
Flow boiling enhancement on a horizontal heater
using carbon nanotube coatings
(201-207)
International Journal of Heat and Fluid Flow 31 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
38.
International Journal of Impact Engineering 37 #6 (2010)
(Titles
and Abstracts)
Impact on HDPE and PVC plates – Experimental
tests and numerical simulations
(580-598)
International Journal of Impact Engineering 37 #6 (2010)
Optimization of composite sandwich panel
against impact using genetic algorithm
(599-604)
International Journal of Impact Engineering 37 #6 (2010)
An experimental and numerical investigation on
tyre impact
(685-693)
International Journal of Impact Engineering 37 #6 (2010)
The SEĖ method for determination of behaviour
laws for strain rate dependent material: Application to polymer material
( 715-722)
International Journal of Impact Engineering 37 #6 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
39.
The
International Journal of Robotics Research
29 #2-3 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
40.
International Journal of Solids and Structures 47 #9 (2010)
(Titles and Abstracts)
Constitutive modeling of shape memory polymer
based self-healing syntactic foam
(1306-1316)
International Journal of Solids and Structures 47 #9 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
41.
International Polymer Processing #1 (2010)
(Titles and Abstracts)
Effect of Clay on Thermal, Mechanical and Gas Barrier Properties of
Biodegradable Poly(lactic acid)/ Poly(butylene succinate) (PLA/PBS)
Nanocomposites
(5-14)
International Polymer Processing #1 (2010)
Thermo-mechanical Properties of Urea-based Pattern Molding Compounds for
Investment Casting
(15-22)
International Polymer Processing #1 (2010)
Erosion Wear Analysis of SiC Filled Glass-Epoxy Composites using Taguchi
Technique
(23-33)
International Polymer Processing #1 (2010)
Production and Characterization of PP/LDPE Blend Filament Yarns under Industrial
Conditions
(34-40)
International Polymer Processing #1 (2010)
Modelling Post-molding Warping
Part 1 Volumetric Expansion
(41-46)
International Polymer Processing #1 (2010)
Modelling Post-molding Warping
Part 2 Deformation
(47-54)
International Polymer Processing #1 (2010)
Appropriate Boundary Conditions in the Flow of Molten Polymers
(55-62)
International Polymer Processing #1 (2010)
Multiscale Simulation of Injection Molding of Parts with Low Aspect Ratio
Microfeatures
(63-74)
International Polymer Processing #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
42.
Inverse Problems in Science and Engineering 18, #4 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
43.
Journal of the American Chemical Society 132 #9 (2010)
(Titles and Abstracts)
Main-Chain Ionic Chiral Polymers: Synthesis of Optically Active Quaternary
Ammonium Sulfonate Polymers and Their Application in Asymmetric Catalysis
(2864–2865)
Journal of the American Chemical Society 132 #9 (2010)
Adsorption of β-Lactoglobulin on Spherical Polyelectrolyte Brushes: Direct Proof
of Counterion Release by Isothermal Titration Calorimetry
(3159–3163)
Journal of the American Chemical Society 132 #9 (2010)
Large Scale Crystallinity in Kinetically Stable Polythiophene-Based Langmuir−Blodgett
Films
(3204–3210)
Journal of the American Chemical Society 132 #9 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
44.
Journal
of Analytical and Applied Pyrolysis 87 #2 (2010)
(Title and Abstracts)
Syngas production from pyrolysis of municipal
solid waste (MSW) with dolomite as downstream catalysts
(181-187)
Journal
of Analytical and Applied Pyrolysis 87 #2 (2010)
Study on the pyrolytic behaviour of xylan-based
hemicellulose using TG–FTIR and Py–GC–FTIR
(199-206)
Journal
of Analytical and Applied Pyrolysis 87 #2 (2010)
Experimental study of hydrocarbon structure
effects on the composition of its pyrolysis products
(207-216)
Journal
of Analytical and Applied Pyrolysis 87 #2 (2010)
A TG-FTIR investigation into smoke suppression
mechanism of magnesium hydroxide in asphalt combustion process
(217-223)
Journal
of Analytical and Applied Pyrolysis 87 #2 (2010)
Two-steps selective thermal depolymerization of
polyethylene. 1: Feasibility and effect of devolatilization heating policy
(248-255)
Journal
of Analytical and Applied Pyrolysis 87 #2 (2010)
Roles of ruthenium on catalytic pyrolysis of
waste tire and the changes of its activity upon the rate of calcination
(256-262)
Journal
of Analytical and Applied Pyrolysis 87 #2 (2010)
The comparison of hazelnut shell co-pyrolysis
with polyethylene oxide and previous ultra-high molecular weight polyethylene
(263-268)
Journal
of Analytical and Applied Pyrolysis 87 #2 (2010)
Preparation and properties of carbon microbeads
by pyrolysis of N-phenyl maleimide
modified novolac resin
(276-281)
Journal
of Analytical and Applied Pyrolysis 87 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
45.
Journal of Applied Polymer Science 116 #5 (2010)
(Titles and Abstracts) (H)
Thermal properties and chemical changes in blend
melt spinning of cellulose acetate butyrate and a novel cationic dyeable
copolyester
(p 2487-2495)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
A study of the mechanisms of divalent copper
binding to a modified cellulose adsorbent
(p 2496-2503)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Degradation of aramid fibers under alkaline and
neutral conditions: Relations between the chemical characteristics and
mechanical properties
(p 2504-2514)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Crystallization studies on linear aliphatic
polyamides derived from naturally occurring carbohydrates
(p 2515-2525)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Wheat gluten nanocomposite films as food-contact
materials: Migration tests and impact of a novel food stabilization technology
(high pressure)
(p 2526-2535)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Synthesis of novel optically active
pyrrolidine-containing polyaniline: A new heterogeneous organo polymeric-base
catalyst for direct Aldol reaction
(p 2536-2540)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Simulation of polyester melt spinning with axial
quench for increasing productivity
(p 2541-2547)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Chitosan modified MMT-poly(AMPS) nanocomposite
hydrogel: Heating effect on swelling and rheological behavior
(p 2548-2556)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Influence of polyfunctional monomer on melt
strength and rheology of long-chain branched polypropylene by reactive
extrusion
(p 2557-2565)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Synergism effect between modified carbon black
and organic ultraviolet absorber in polymer matrix for ultraviolet protection
(p 2566-2572)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
The effect of anionic clay particles on the
structure and thermomechanical behavior of sodium partially-neutralized EMAA
ionomer
(p 2573-2579)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Synthesis of thermosensitive copolymer beads
containing pyridinium groups and their antibacterial activity
(p 2580-2589)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Microscopic mechanical properties and injection
molding-induced morphology on polypropylene rubber blend
(p 2590-2600)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Preparation and self-assembly of polyaniline
nanorods and their application as electroactive actuators
(p 2601-2609)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Preparation of polyacrylonitrile with improved
isotacticity and low polydispersity
(p 2610-2616)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Gelatin-g-poly(methyl methacrylate)/silver
nanoparticle hybrid films and the evaluation of their antibacterial activity
(p 2617-2625)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Key factors affecting the manufacture of
hydrophobic ultrafiltration membranes for surface water treatment
(p 2626-2637)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Water absorbance and thermal properties of
sulfated wheat gluten films
(p 2638-2644)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Studies on shrinkage, depth of cure, and
cytotoxic behavior of novel organically modified ceramic based dental
restorative resins
(p 2645-2650)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Immobilization of alcohol dehydrogenase on films
prepared by the electrochemical copolymerization of pyrrole and
1-(2-carboxyethyl)pyrrole for ethanol sensing
(p 2651-2657)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Crystallization behavior of poly(
-caprolactone)/layered
double hydroxide nanocomposites
(p 2658-2667)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Plasticization of poly(arylene ether nitrile) by
the melt blending of phthalonitrile prepolymer: A rheological, mechanical, and
thermal study
(p 2668-2673)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Effect of poly(methyl methacrylate) addition on
the dielectric and energy storage properties of poly(vinylidene fluoride)
(p 2674-2684)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Melt spinning of poly(vinylidene fluoride) fibers
and the influence of spinning parameters on 
-phase
crystallinity
(p 2685-2693)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Polyurethane/acrylate hybrids: Effects of the
acrylic content and thermal treatment on the polymer properties
(p 2694-2705)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Mechanical and functional properties of
composites based on graphite and carboxylated acrylonitrile butadiene rubber
(p 2706-2713)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Flammability and mechanical properties of wood
flour-filled polypropylene composites
(p 2714-2722)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Photoinduced cografting of vinyl benzyl
trimethylammonium chloride and 2-hydroxyethyl methacrylate onto nylon nonwoven
fabric for preparing an anion-exchange sorbent: Optimum cografting conditions
and characterization
(p 2723-2733)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Characteristic rheological features of high
concentration PVA solutions in water with different degrees of polymerization
(p 2734-2741)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Preparation of O-carboxymethyl-N-trimethyl
chitosan chloride and flocculation of the wastewater in sugar refinery
(p 2742-2748)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Preparation and characterization of
interpenetrating polymer network silicone hydrogels with high oxygen
permeability
(p 2749-2757)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Relaxation behavior of conductive carbon black
reinforced chlorosulfonated polyethylene composites
(p 2758-2767)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Microbial desulfurization for NR ground rubber by
Thiobacillus ferrooxidans
(p 2768-2774)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Synthesis and properties of electromagnetic wave
shielding polymer materials with low flammability
(p 2775-2782)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Synthesis and characterization of (Fe3O4/MWCNTs)/
epoxy nanocomposites
(p 2783-2792)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Fluorinated polypropylene barrier materials:
Preparation and characterization
(p 2793-2801)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
New melamine-formaldehyde-ketone resins. VI.
Preparation of filled molding compositions and compression-molding materials
from reactive solvents based on cyclohexanone
(p 2802-2807)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Nanogels of poly(acrylic acid): Uptake and
release behavior with fluorescent oligothiophene-labeled bovine serum albumin
(p 2808-2815)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Microwave assisted polycondensation of polyimides
by [4,4
-(hexafluoroisopropylidene)diphthalic
anhydride, pyromellitic dianhydride] and [2,4,6-trimethyl-m-phenylenediamine].
Power, time, and solvent effect
(p 2816-2824)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Effect of natural polyphenols on physicochemical
properties of crosslinked gelatin-based polymeric biocomposite
(p 2825-2832)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Studies on polymeric conservation treatments of
ceramic tiles with Paraloid B-72 and two alkoxysilanes
(p 2833-2839)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Melamine-bridged alkyl resorcinol modified
urea-formaldehyde resin for bonding hardwood plywood
(p 2840-2845)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Design and performance evaluation of multilayer
packaging films for blister packaging applications
(p 2846-2856)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Macroporous bead modification with
polyethylenimines of different molecular weights as polycationic ligands
(p 2857-2865)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Preparation and properties of polylactide-silica
nanocomposites
(p 2866-2873)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Influence of starch and glycerol on the
properties of chitosan by positron annihilation spectroscopy
(p 2874-2883)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Graft polymerization of acrylic acid onto
polypropylene monofilament by RF plasma
(p 2884-2892)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Synthesis and application of modified starch as a
shell-core main adhesive in a foundry
(p 2893-2900)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Coimmobilization of malic enzyme and alanine
dehydrogenase on organic-inorganic hybrid gel fibers and the production of
L-alanine from malic acid using the fibers
with coenzyme regeneration
(p 2901-2905)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Effects of membrane thickness and heat treatment
on the gas transport properties of membranes based on P84 polyimide
(p 2906-2912)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Competitive adsorption between an AMPS®-based
fluid loss polymer and Welan gum biopolymer in oil well cement
(p 2913-2919)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Unique stimuli responsive characteristics of
electron beam synthesized bacterial cellulose/acrylic acid composite
(p 2920-2929)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Enhancement of dispersion of carbon nanotube and
physical properties of poly(styrene-co-acrylonitrile)/multiwalled carbon
nanotube nanocomposite via surface initiated ATRP
(p 2930-2936)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Synthesis and characterization of novel hybrid
polyoxazoline-grafted multiwalled carbon nanotubes
(p 2937-2943)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Preparation and in vitro drug-release
behavior of 5-fluorouracil-loaded poly(hydroxybutyrate-co-hydroxyhexanoate)
nanoparticles and microparticles
(p 2944-2950)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Kinetic analysis of the imidization of
poly(styrene-co-maleic anhydride) with aniline in the melt
(p 2951-2957)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Properties of water-soluble acrylic
copolymer/montmorillonite nanocomposites for warp sizing
(p 2958-2964)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Mechanical and antibacterial properties of
modified nano-ZnO/high-density polyethylene composite films with a low doped
content of nano-ZnO
(p 2965-2969)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Cadmium and copper absorption mediated by a
poly(vinyl alcohol)-b-polyacrylonitrile based micelle/Trichosporon
cutaneum cell system
(p 2970-2975)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Investigation on synergic activity of N-benzylimine
aminothioformamide binary accelerator system in sulfur vulcanization of natural
rubber
(p 2976-2981)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Preparation and sorption studies of -cyclodextrin/epichlorohydrin
copolymers
(p 2982-2989)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
The effect of water-soluble polymers on rheology
of microfibrillar cellulose suspension and dynamic mechanical properties of
paper sheet
(p 2990-2997)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Poly(ethylene-co-vinyl alcohol) and Nylon
6/12 nanofibers produced by melt electrospinning system equipped with a
line-like laser beam melting device
(p 2998-3004)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Effects of fiber characteristics on the
mechanical and rheological properties of poly(butylene terephthalate)/glass
fiber composites
(p 3005-3012)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Solution properties of hyaluronic acid and
comparison of SEC-MALS-VIS data with off-line capillary viscometry
(p 3013-3020)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Surprising performance of alginate beads for the
release of low-molecular-weight drugs
(p 3021-3026)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Influence of in situ compatibilization on
in situ formation of low-density polyethylene/polyamide 6 blends by
reactive extrusion
(p 3027-3034)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Study on properties of a novel photosensitive
polysiloxane urethane acrylate for solder mask
(p 3035-3039)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Hemodialysis membrane prepared from cellulose/N-methylmorpholine-N-oxide
solution. IV. Comparative studies on the surface morphology of membranes
prepared from N-methylmorpholine-N-oxide and cuprammonium
solutions
(p 3040-3046)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Synthesis and rheological behavior of
hydrophobically modified block copolymers
(p 3047-3055)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Phase separation and mechanical properties of
polyketone/polyamide polymer alloys
(p 3056-3069)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Influence of the matrix porosity on the synthesis
and adsorption behavior of dithiocarbamate styrenic resins toward zinc(II) and
cadmium(II) ions
(p 3070-3078)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Mechanochemical preparation of a novel polymeric
photostabilizer for poly(vinyl chloride)
(p 3079-3086)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Positron Lifetime Spectroscopy and Differential
Scanning Calorimetric study of polystyrene-based composites with fly ash,
cenospheres, and calcium aluminosilicate as fillers
(p 3087-3094)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Synthesis and characterization of maleic acid
polymer for use as scale deposits inhibitors
(p 3095-3102)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
Synthesis and distribution of structural
units - Thermal property relationship of random and block butadiene-styrene
copolymers with high trans 1,4 units content produced using an initiator
composed of alkyl aluminum, n-butyl lithium, and barium alkoxide
(p 3103-3110)
Journal of Applied Polymer Science 116 #5 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
46.
Journal
of Fire Sciences
28 #2 (2010)
(Titles and Abstracts) S
Experiments and Modeling of Large-scale Benchmark
Enclosure Fire Suppression
(109-139)
Journal of Fire Sciences 28 #2 (2010)
[Abstract]
Fire Structural Modeling of Polymer Composites with
Passive Thermal Barrier
(141-160)
Journal of Fire Sciences 28 #2 (2010)
[Abstract]
Influence of Magnesium Hydroxide and Huntite
Hydromagnesite on Mechanical Properties of Ethylene Vinyl Acetate Compounds
Cross-linked by DiCumyl Peroxide and Ionizing Radiation
(161-180)
Journal of Fire Sciences 28 #2 (2010)
[Abstract]
Suppression Dynamics of a Co-flow Diffusion Flame with
High Expansion Aqueous Foam
(181-208)
Journal of Fire Sciences 28 #2 (2010)
[Abstract]
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
47.
Macromolecular Chemistry and Physics 211 #5 (2010)
(Titles and Abstracts)
ATRP of Styrene and Methyl Methacrylate with Less
Efficient Catalysts and with Alkyl Pseudohalides as Initiators/Chain Transfer
Agents
(p 493-500)
Macromolecular Chemistry and Physics 211 #5 (2010)
Abstract
An Investigation of Free Radical Copolymerization
Kinetics of the Bio-renewable Monomer 
-Methyl-
-methylene--butyrolactone
with Methyl methacrylate and Styrene
Macromolecular Chemistry and Physics 211 #5 (2010)
Abstract
From Fundamental Polymerization Kinetics to
Process Application - A Realistic Vision?
(p 510-519)
Macromolecular Chemistry and Physics 211 #5 (2010)
Abstract
Mark-Houwink Parameters for the Universal
Calibration of Acrylate, Methacrylate and Vinyl Acetate Polymers Determined by
Online Size-Exclusion Chromatography - Mass Spectrometry
(p 520-528)
Macromolecular Chemistry and Physics 211 #5 (2010)
Abstract
Substituent Effects on RAFT Polymerization with
Benzyl Aryl Trithiocarbonates
(p 529-538)
Macromolecular Chemistry and Physics 211 #5 (2010)
Abstract
Determination of Propagation Rate Coefficients of
a Family of Acrylates with PLP-MALDI-ToF-MS
(p 539-545)
Macromolecular Chemistry and Physics 211 #5 (2010)
Abstract
Propagation and Termination Kinetics of PEGylated
Methacrylate Radical Polymerizations
(p 546-562)
Macromolecular Chemistry and Physics 211 #5 (2010)
Abstract
Termination Rate Coefficients for Radical
Homopolymerization of Methyl Methacrylate and Styrene at Low Conversion
(p 563-579)
Macromolecular Chemistry and Physics 211 #5 (2010)
Abstract
Free-Radical Propagation Kinetics of N-Vinyl
Formamide in Aqueous Solution Studied by PLP-SEC
(p 580-593)
Macromolecular Chemistry and Physics 211 #5 (2010)
Abstract
A Systematic Kinetic Study in Reversible Chain
Transfer Catalyzed Polymerizations (RTCPs) with Germanium, Tin, Phosphorus, and
Nitrogen Catalysts
(p 594-600)
Macromolecular Chemistry and Physics 211 #5 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
48.
Macromolecular Rapid Communications 31 #5 (2010)
(Titles and Abstracts)
Review
Molecular Aspects of Radical Polymerizations - The Propagation Frequency
(p 419-442)
Macromolecular Rapid Communications 31 #5 (2010)
Abstract
Controlling the Optical Properties of
Hyperbranched Conjugated Polyazomethines through Terminal-Backbone Interactions
(p 443-448)
Macromolecular Rapid Communications 31 #5 (2010)
Abstract
Sphere-to-Rod Transition of Micelles formed by
the Semicrystalline Polybutadiene-block-Poly(ethylene oxide) Block
Copolymer in a Selective Solvent
(p 449-453)
Macromolecular Rapid Communications 31 #5 (2010)
Abstract
Gold Nanoparticles Functionalized by a
Dextran-Based pH- and Temperature-Sensitive Polymer
(p 454-458)
Macromolecular Rapid Communications 31 #5 (2010)
Abstract
Design of Organoiron Macromolecules Based on
Upper Rim Functionalized Calix[4]arenes
(p 459-466)
Macromolecular Rapid Communications 31 #5 (2010)
Abstract
Electron Beam-Based Functionalization of
Poly(ethersulfone) Membranes
(p 467-472)
Macromolecular Rapid Communications 31 #5 (2010)
Abstract
Bis(germyl)ketones: Toward a New Class of Type I
Photoinitiating Systems Sensitive Above 500 nm?
(p 473-478)
Macromolecular Rapid Communications 31 #5 (2010)
Abstract
In situ Photopolymerization of a Gel Ionic Liquid
Electrolyte in the Presence of Iodine and Its Use in Dye Sensitized Solar Cells
(p 479-483)
Macromolecular Rapid Communications 31 #5 (2010)
Abstract
Sequential Polymer Precipitation of Core-Shell
Microstructured Composites with Giant Permittivity
(p 484-489)
Macromolecular Rapid Communications 31 #5 (2010)
Abstract
Two Types of Block Copolymer Micelles with
Ion-Containing Cores
(p 490-495)
Macromolecular Rapid Communications 31 #5 (2010)
Abstract
Novel Spectrally Stable Saturated
Blue-Light-Emitting Poly[(fluorene)-co-(dioctyldibenzothiophene-S,S-dioxide)]s
(p 496-501)
Macromolecular Rapid Communications 31 #5 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
49.
Macromolecules 43 #5 (2010)
(Titles and Abstracts)
Organocatalysis: Opportunities and Challenges for Polymer Synthesis
(2093–2107) Macromolecules
43 #5 (2010)
A Novel Linear Titanium(IV)-POSS Coordination Polymer
(2108–2110) Macromolecules
43 #5 (2010)
Hierarchically Ordered Montmorillonite Block Copolymer Brushes
(2111–2114) Macromolecules
43 #5 (2010)
Molecular Aggregation Structures of Polyimide Films at Very High Pressure
Analyzed by Synchrotron Wide-Angle X-ray Diffraction
(2115–2117) Macromolecules
43 #5 (2010)
Conformationally Twisted Semiconducting Polythiophene Derivatives with
Alkylthiophene Side Chain: High Solubility and Air Stability
(2118–2123) Macromolecules
43 #5 (2010)
Hyperbranched Conjugated Polymers: Postfunctionalization
(2124–2129) Macromolecules
43 #5 (2010)
Study of the Supramolecular Architecture-Directed Synthesis of a Well-Defined
Triple-Chain Ladder Polyphenylsiloxane
(2130–2136) Macromolecules
43 #5 (2010)
Substituted Poly(p-phenylene) Thin Films via Surface-Initiated Kumada-Type
Catalyst Transfer Polycondensation
(2137–2144) Macromolecules
43 #5 (2010)
Synthesis of Branched Methacrylic Copolymers: Comparison between RAFT and ATRP
and Effect of Varying the Monomer Concentration
(2145–2156) Macromolecules
43 #5 (2010)
Steering the Conformation and Chiroptical Properties of Poly(dithienopyrrole)s
Substituted with Chiral OPV Side Chains.
(2157–2168) Macromolecules
43 #5 (2010)
Synthesis of Sterically-Stabilized Latexes Using Well-Defined Poly(glycerol
monomethacrylate) Macromonomers
(2169–2177) Macromolecules
43 #5 (2010)
Electrochemical Synthesis of Polyaniline Nanobelts with Predominant
Electrochemical Performances
(2178–2183) Macromolecules
43 #5 (2010)
Synthesis of Poly(vinyl acetate)-b-polystyrene and Poly(vinyl
alcohol)-b-polystyrene Copolymers by a Combination of Cobalt-Mediated Radical
Polymerization and RAFT Polymerization
(2184–2189) Macromolecules
43 #5 (2010)
Pearl Necklace Architecture: New Threaded Star-Shaped Copolymers
(2190–2203) Macromolecules
43 #5 (2010)
Toward Nitroxide-Mediated Photopolymerization
(2204–2212) Macromolecules
43 #5 (2010)
Quick Access to Diverse Polymerizable Molecules (a Monomer Library) by Catalytic
[2 + 2 + 2] Cycloaddition Reactions of Functionalized Alkynes
(2213–2218) Macromolecules
43 #5 (2010)
Role of Bimolecular Homolytic Substitution (SH2) Reactions in Free Radical
Photopolymerization Under Air
(2219–2227) Macromolecules
43 #5 (2010)
Kinetics of Segment Formation in Nitroxide-Mediated Controlled Radical
Polymerization: Comparison with Classic Theory
(2228–2235) Macromolecules
43 #5 (2010)
N,N,N′,N′- Tetraphenyl-1,4-phenylenediamine−Fluorene Alternating Conjugated
Polymer: Synthesis, Characterization, and Electrochromic Application
(2236–2243) Macromolecules
43 #5 (2010)
Amino Functional Poly(ethylene glycol) Copolymers via Protected Amino Glycidol
(2244–2251) Macromolecules
43 #5 (2010)
β-Cyclodextrin-Capped Polyrotaxanes: One-Pot Facile Synthesis via Click
Chemistry and Use as Templates for Platinum Nanowires
(2252–2260) Macromolecules
43 #5 (2010)
N-Heterocyclic Carbenes−Borane Complexes: A New Class of Initiators for Radical
Photopolymerization
(2261–2267) Macromolecules
43 #5 (2010)
Novel Aromatic Polyimides Derived from
5′-t-Butyl-2′-pivaloylimino-3,4,3′′,4′′-m-terphenyltetracarboxylic Dianhydride
with Potential Application on Gas Separation Processes
(2268–2275) Macromolecules
43 #5 (2010)
Synthesis and Phase Behavior of CO2-Soluble Hydrocarbon Copolymer: Poly(vinyl
acetate-alt-dibutyl maleate)
(2276–2282) Macromolecules
43 #5 (2010)
Controlled Ring-Opening Polymerization of ε-Caprolactone Catalyzed by Rare-Earth
Perfluoroalkanesulfonates and Perfluoroalkanesulfonimides
(2283–2290) Macromolecules
43 #5 (2010)
Highly Active Di- and Trimetallic Cobalt Catalysts for the Copolymerization of
CHO and CO2 at Atmospheric Pressure
(2291–2298) Macromolecules
43 #5 (2010)
Rational Design of Silicon-Bridged Fluorenyl−Phenoxy Group 4 Metal Complexes as
Catalysts for Producing High Molecular Weight Copolymers of Ethylene and
1-Hexene at Elevated Temperature
(2299–2306) Macromolecules
43 #5 (2010)
Two-Step Folding of Donor−Acceptor Foldamers
(2307–2312) Macromolecules
43 #5 (2010)
Reactive Compatibilization of Poly(l-lactide) and Conjugated Soybean Oil
(2313–2321) Macromolecules
43 #5 (2010)
Flexible Conductive Polymer Patterns from Vapor Polymerizable and
Photo-Cross-Linkable EDOT
(2322–2327) Macromolecules
43 #5 (2010)
Germafluorenes: New Heterocycles for Plastic Electronics
(2328–2333) Macromolecules
43 #5 (2010)
Remediation of Line Edge Roughness in Chemical Nanopatterns by the Directed
Assembly of Overlying Block Copolymer Films
(2334–2342) Macromolecules
43 #5 (2010)
The Molecular Structure of Polymer−Fullerene Composite Solar Cells and Its
Influence on Device Performance
(2343–2348) Macromolecules
43 #5 (2010)
Anion Exchange Membranes by Bromination of Benzylmethyl-Containing
Poly(sulfone)s
(2349–2356) Macromolecules
43 #5 (2010)
Enhanced Mechanical Properties of Graphene-Based Poly(vinyl alcohol) Composites
(2357–2363) Macromolecules
43 #5 (2010)
NMR Study of Interactions between Silk Model Peptide and Fluorinated Alcohols
for Preparation of Regenerated Silk Fiber
(2364–2370) Macromolecules
43 #5 (2010)
Syndiotactic Polystyrene Nanofibers Obtained from High-Temperature Solution
Electrospinning Process
(2371–2376) Macromolecules
43 #5 (2010)
Phthalate Plasticizers Covalently Bound to PVC: Plasticization with Suppressed
Migration
(2377–2381) Macromolecules
43 #5 (2010)
Thickening-Induced Faceting Habit Change in Solution-Grown Poly(l-lactic acid)
Crystals
(2382–2388) Macromolecules
43 #5 (2010)
Control of Structural Morphology in Shear-Induced Crystallization of Polymers
(2389–2405) Macromolecules
43 #5 (2010)
Deformation-Induced Phase Transitions of Polyamide 12 at Different Temperatures:
An in Situ Wide-Angle X-ray Scattering Study
(2406–2412) Macromolecules
43 #5 (2010)
Layer-by-Layer Codeposition of Polyelectrolyte Complexes and Free
Polyelectrolytes for the Fabrication of Polymeric Coatings
(2413–2420) Macromolecules
43 #5 (2010)
Unrevealed Self-Assembly and Crystallization Structures of Na−Alginate, Induced
by the Drying Dynamics of Wetting Films of the Aqueous Polymer Solution
(2421–2429) Macromolecules
43 #5 (2010)
Layer-by-Layer Assembly of Polyelectrolytes in Nanofluidic Devices
(2430–2437) Macromolecules
43 #5 (2010)
Unusual Surface Aging of Poly(dimethylsiloxane) Elastomers
(2438–2443) Macromolecules
43 #5 (2010)
Swelling and switching kinetics of gold coated end-capped
poly(N-isopropylacrylamide) thin films
(2444–2452) Macromolecules
43 #5 (2010)
Effects of Nanoscale Confinement and Pressure on the Dynamics of
pODMA-b-ptBA-b-pODMA Triblock Copolymers
(2453–2462) Macromolecules
43 #5 (2010)
Composition-Dependent Morphological Transitions and Pathways in Switching of
Fine Structure in Thin Films of Block Copolymer Supramolecular Assemblies
(2463–2473) Macromolecules
43 #5 (2010)
Aqueous Solution Properties of the Acid-Labile Thermoresponsive
Poly(meth)acrylamides with Pendent Cyclic Orthoester Groups
(2474–2483) Macromolecules
43 #5 (2010)
Poly(thiophene) Nanoparticles Prepared by Fe3+-Catalyzed Oxidative
Polymerization: A Size-Dependent Effect on Photoluminescence Property
(2484–2489) Macromolecules
43 #5 (2010)
Thermoresponsive PS-b-PNIPAM-b-PS Micelles: Aggregation Behavior, Segmental
Dynamics, and Thermal Response
(2490–2501) Macromolecules
43 #5 (2010)
Effect of Hydrophilic Block-A Length Tuning on the Aggregation Behavior of
α,ω-Perfluoroalkyl End-Capped ABA Triblock Copolymers in Water
(2502–2511) Macromolecules
43 #5 (2010)
Hydrogen Bonded Supramolecular Elastomers: Correlating Hydrogen Bonding Strength
with Morphology and Rheology
(2512–2517) Macromolecules
43 #5 (2010)
Phase Behavior and Coacervation of Aqueous Poly(acrylic acid)−Poly(allylamine)
Solutions
(2518–2528) Macromolecules
43 #5 (2010)
Self-Assembly in Solution of a Reversible Comb-Shaped Supramolecular Polymer
(2529–2534) Macromolecules
43 #5 (2010)
Analysis of the Migration of Rigid Polymers and Nanorods in a Rotating
Viscometric Flow
(2535–2543) Macromolecules
43 #5 (2010)
Influence of Explicit Ions on Titration Curves and Conformations of Flexible
Polyelectrolytes: A Monte Carlo Study
(2544–2553) Macromolecules
43 #5 (2010)
Large Strain and Fracture Properties of Poly(dimethylacrylamide)/Silica Hybrid
Hydrogels
(2554–2563) Macromolecules
43 #5 (2010)
On the Influence of Topological Catenation and Bonding Constraints on Ring
Polymers
(2564–2573) Macromolecules
43 #5 (2010)
Effective Charge and Coil−Globule Transition of a Polyelectrolyte Chain
(2574–2581) Macromolecules
43 #5 (2010)
Charge Inversion by Flexible Polyelectrolytes Adsorbed onto Charged Cylindric
Surfaces within Self-Consistent-Field Theory
(2582–2588) Macromolecules
43 #5 (2010)
Effect of the Electrostatic Interactions on Stretching of Semiflexible and
Biological Polyelectrolytes
(2589–2604) Macromolecules
43 #5 (2010)
Carbon Dioxide Solubility in Three Fluorinated Polyimides Studied by Molecular
Dynamics Simulations
(2605–2621) Macromolecules
43 #5 (2010)
Microphase Separation Induced by Complexation of Ionic−Non-Ionic Diblock
Copolymers with Oppositely Charged Linear Chains
(2622–2629) Macromolecules
43 #5 (2010)
Novel Stimuli-Responsive Polyelectrolyte Brushes
(2630–2633) Macromolecules
43 #5 (2010)
A New Poly(amide urethane) Solid State Electrolyte Containing Supramolecular
Structure
(2634–2637) Macromolecules
43 #5 (2010)
Using Elastomers and Rubbers for Heat-Conduction Damping of Sound and Vibrations
( 2638–2641) Macromolecules
43 #5 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
50.
Modern Plastics (2010)
(Titles and Abstracts)
Weekly
Trade
Magazine
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
51.
Nanotechnology 21 #12 (2010)
(Titles and Abstracts; Full PDF versions of Articles are available free
for 30 days after publication)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
52.
Plastics Europe #2 (2010)
English version of Kunststoffe
(Titles
and Abstracts) Some, not all, articles are available without charge
Trade
Journal
Development of Quality Assurance for Insulating Materials
Looking Back
(6-9)
Plastics Europe #2 (2010) English version of Kunststoffe
Response to the Slack Period
Film Extrusion
(10-11)
Plastics Europe #2 (2010) English version of Kunststoffe
Pressure Demands Counterpressure
EPS Manufacture
(12-16)
Plastics Europe #2 (2010) English version of Kunststoffe
Temperature Control Systems in Motion
Design of Sliding Cores
(17-20)
Plastics Europe #2 (2010) English version of Kunststoffe
Simulating Parts instead of Trying Them out
Pro4Plast – Part 3
(21-24)
Plastics Europe #2 (2010) English version of Kunststoffe
Purity and Clarity
Packaging
(25-27)
Plastics Europe #2 (2010) English version of Kunststoffe
Active Packaging Functions
Functional Films
(28-30)
Plastics Europe #2 (2010) English version of Kunststoffe
Long Lasting Effect
Permanent Antistatics
(31-35)
Plastics Europe #2 (2010) English version of Kunststoffe
Proving Sustainability
Wood Polymer Composites
(36-38)
Plastics Europe #2 (2010) English version of Kunststoffe
Knitted Polymer for the Small Intestine
Textile-Plastic Composite
(39-40)
Plastics Europe #2 (2010) English version of Kunststoffe
Titanium in Difficulties
PEEK
(41-43)
Plastics Europe #2 (2010) English version of Kunststoffe
Safety, Innovation, Service
Healthcare Sector
(44-47)
Plastics Europe #2 (2010) English version of Kunststoffe
Controlled Melt Build-Up
Ultrasonic Welding
(48-50)
Plastics Europe #2 (2010) English version of Kunststoffe
Disposable Syringes Manufactured to Dimensional Accuracy Standards
Hot-Runner Technology
(51-53)
Plastics Europe #2 (2010) English version of Kunststoffe
Putting the Crown on the Tip
Hot-Runner Technology
(54-55)
Plastics Europe #2 (2010) English version of Kunststoffe
Thickness Tolerance as a Quality Aspect
Metrology
(56-57)
Plastics Europe #2 (2010) English version of Kunststoffe
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
53.
Plastics Technology (March 2010)
(Titles, Abstracts and Articles)
Trade
Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
54.
Polymer
Degradation and Stability
95 #4 (2010)
(Titles and Abstracts)
Review
Investigation of water absorption in clay-reinforced polypropylene
nanocomposites
(429-439)
Polymer
Degradation and Stability
95 #4 (2010)
Discontinuous crack growth in poly (vinyl
fluoride) by mechanochemical ageing in sodium hydroxide
(440-444)
Polymer
Degradation and Stability
95 #4 (2010)
New hyperbranched polyester modified DGEBA
thermosets with improved chemical reworkability
(445-452)
Polymer
Degradation and Stability
95 #4 (2010)
Poly(vinyl acetate) paints in works of art: A
photochemical approach. Part 1
(453-461)
Polymer
Degradation and Stability
95 #4 (2010)
Gamma polymorph and branching formation as
inductors of resistance to electron beam irradiation in metallocene isotactic
polypropylene
(462-469)
Polymer
Degradation and Stability
95 #4 (2010)
Physicochemical characterisation of sugar cane
bagasse lignin oxidized by hydrogen peroxide
(470-476)
Polymer
Degradation and Stability
95 #4 (2010)
Accelerated hydrolytic degradation of Poly(
(477-484)
Polymer
Degradation and Stability
95 #4 (2010)
Improved hydrolytic stability of poly(
(485-490)
Polymer
Degradation and Stability
95 #4 (2010)
Biodegradation of polyurethanes and
nanocomposites to non-cytotoxic degradation products
(491-499)
Polymer
Degradation and Stability
95 #4 (2010)
Synthesis, characterization and
functionalization of thermally stable hyperbranched polyamide-ethers based on
6-hydroxy-2,4-bis(4′-nitrobenzamide)pyrimidine
(500-507)
Polymer
Degradation and Stability
95 #4 (2010)
Thermal degradation comparison of polypropylene
glycol and its complex with β-cyclodextrin
(508-515)
Polymer
Degradation and Stability
95 #4 (2010)
Influences of extractives on the
photodegradation of wood
(516-521)
Polymer
Degradation and Stability
95 #4 (2010)
Photooxidative behaviour of
polyethylene/polyamide-6 blends
(522-526)
Polymer
Degradation and Stability
95 #4 (2010)
Photo-oxidation behaviour of
polyethylene/polyamide 6 blends filled with organomodified clay: Improvement of
the photo-resistance through morphology modification
(527-535)
Polymer
Degradation and Stability
95 #4 (2010)
Degradability of composites of low density
polyethylene/polypropylene blends filled with rape straw
(536-542)
Polymer
Degradation and Stability
95 #4 (2010)
Enzymatic hydrolysis of cellulose I is greatly
accelerated via its conversion to the cellulose II hydrate form
(543-548)
Polymer
Degradation and Stability
95 #4 (2010)
In vitro
degradation of poly(lactide-co-p-dioxanone)-based
shape memory poly(urethane–urea)
(549-556)
Polymer
Degradation and Stability
95 #4 (2010)
Enhanced production of poly(vinyl
alcohol)-degrading enzymes by mixed microbial culture using 1,4-butanediol and
designed fermentation strategies
(557-563)
Polymer
Degradation and Stability
95 #4 (2010)
Synergistic effect of carbon nanotubes and
decabromodiphenyl oxide/Sb2O3 in improving the flame
retardancy of polystyrene
(564-571)
Polymer
Degradation and Stability
95 #4 (2010)
A comparison of the fire retardancy of
poly(methyl methacrylate) using montmorillonite, layered double hydroxide and
kaolinite
(572-578)
Polymer
Degradation and Stability
95 #4 (2010)
Novel stabilisers acting simultaneously as
molecular-weight regulators in soluble elastomeric polyurethanes
(579-586)
Polymer
Degradation and Stability
95 #4 (2010)
Effect of anionic organoclay with special
aggregate structure on the flame retardancy of acrylonitrile–butadiene–styrene/clay
composites
(587-592)
Polymer
Degradation and Stability
95 #4 (2010)
A dielectric study of molecular relaxations in
irradiated high density polyethylene
(593-599)
Polymer
Degradation and Stability
95 #4 (2010)
Influences of template concentration and epoxy
functionality on porous epoxy systems: Characteristics of thermal stability,
optical, dielectric, and mechanical properties
(600-609)
Polymer
Degradation and Stability
95 #4 (2010)
Dispersions of nanosilica in biocompatible
copolymers
(610-617)
Polymer
Degradation and Stability
95 #4 (2010)
Thermal behaviour and mechanical properties of
novel RTV silicone rubbers using divinyl-hexa[(trimethoxysilyl)ethyl]-POSS as
cross-linker
(618-626)
Polymer
Degradation and Stability
95 #4 (2010)
Synthesis and characterization of novel
poly(propylene terephthalate-co-adipate) biodegradable random copolyesters
(627-637)
Polymer
Degradation and Stability
95 #4 (2010)
Correlation between hue angle and lightness of
light irradiated wood
(638-642)
Polymer
Degradation and Stability
95 #4 (2010)
Controlled enzymatic degradation of poly(-caprolactone)-based
copolymers in the presence of porcine pancreatic lipase
(643-650)
Polymer
Degradation and Stability
95 #4 (2010)
Structural design of imidazolium and its
application in PP/montmorillonite nanocomposites
(651-655)
Polymer
Degradation and Stability
95 #4 (2010)
Mechanism of stress cracking of poly(ethylene
terephthalate) beverage bottles: A method for the prevention of stress cracking
based on water hardness
(656-665)
Polymer
Degradation and Stability
95 #4 (2010)
Fingerprinting of bottle-grade poly(ethylene
terephthalate) via matrix-assisted laser desorption/ionization mass spectrometry
(666-671)
Polymer
Degradation and Stability
95 #4 (2010)
Accelerating effect of montmorillonite on
oxidative degradation of polyethylene nanocomposites
(672-676)
Polymer
Degradation and Stability
95 #4 (2010)
Hydrothermal ageing of radiation cured epoxy
resin-polyether sulfone blends as matrices for structural composites
(677-683)
Polymer
Degradation and Stability
95 #4 (2010)
Thermal stability of 6FDA-(co-)polyimides
containing carboxylic acid groups
(684-693)
Polymer
Degradation and Stability
95 #4 (2010)
Effect of porogen on the physico-chemical
properties and degradation performance of PLGA scaffolds
(694-701)
Polymer
Degradation and Stability
95 #4 (2010)
A study of the surface morphology of
poly(p-phenylene terephthalamide) chars using scanning probe microscopy
(702-707)
Polymer
Degradation and Stability
95 #4 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
55.
Polymer
International
59 #3 (2010)
(Titles and Abstracts)
(H)
Ionic polymer-metal composite mechanoelectrical
transduction: review and perspectives
(p 279-289)
Polymer International 59 #3 (2010)
Abstract
Review
Considerations for contractile electroactive polymeric materials and actuators
(p 290-299)
Polymer International 59 #3 (2010)
Abstract
Self-sensing ionic polymer-metal composite
actuating device with patterned surface electrodes
(p 300-304)
Polymer International 59 #3 (2010)
Abstract
Electro-active polymer actuators employing
sulfonated poly(styrene-ran-ethylene) as ionic membranes
(p 305-312)
Polymer International 59 #3 (2010)
Abstract
Poly(3,4-ethylenedioxythiophene)-containing
semi-interpenetrating polymer networks: a versatile concept for the design of
optical or mechanical electroactive devices
(p 313-320)
Polymer International 59 #3 (2010)
Abstract
Influence of imidazolium-based ionic liquids on
the performance of ionic polymer conductor network composite actuators
(p 321-328)
Polymer International 59 #3 (2010)
Abstract
Conformational energy from the oxidation kinetics
of poly(3,4-ethylenedioxythiophene) films
(p 329-336)
Polymer International 59 #3 (2010)
Abstract
Polypyrrole free-standing electrodes sense
temperature or current during reaction
(p 337-342)
Polymer International 59 #3 (2010)
Abstract
Analytical modeling of a conducting
polymer-driven catheter
(p 343-351)
Polymer International 59 #3 (2010)
Abstract
A micropump driven by a polypyrrole-based
conducting polymer soft actuator
(p 352-356)
Polymer International 59 #3 (2010)
Abstract
Evaluation of thrust force generated for a
robotic fish propelled with polypyrrole actuators
(p 357-364)
Polymer International 59 #3 (2010)
Abstract
New design of actuator using shear
piezoelectricity of a chiral polymer, and prototype device
(p 365-370)
Polymer International 59 #3 (2010)
Abstract
Electromechanical stability of a Mooney-Rivlin-type
dielectric elastomer with nonlinear variable permittivity
(p 371-377)
Polymer International 59 #3 (2010)
Abstract
Nonlinear oscillation of a dielectric elastomer
balloon
(p 378-383)
Polymer International 59 #3 (2010)
Abstract
Interpenetrating polymer networks based on
acrylic elastomers and plasticizers with improved actuation temperature range
(p 384-390)
Polymer International 59 #3 (2010)
Abstract
A comparison between silicone and acrylic
elastomers as dielectric materials in electroactive polymer actuators
(p 391-399)
Polymer International 59 #3 (2010)
Abstract
Perspectives for new dielectric elastomers with
improved electromechanical actuation performance: composites versus
blends
(p 400-406)
Polymer International 59 #3 (2010)
Abstract
Millimetre-scale bubble-like dielectric elastomer
actuators
(p 407-414)
Polymer International 59 #3 (2010)
Abstract
Dielectric electro-active polymer push actuators:
performance and challenges
(p 415-421)
Polymer International 59 #3 (2010)
Abstract
Real-time control of dielectric elastomer
actuators via bioelectric and biomechanical signals
(p 422-429)
Polymer International 59 #3 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
56.
Polymer Journal 42 #3 (2010)
(Titles and Abstracts)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
57.
Journal of Building Physics 33 #3 (2010)
(Titles and Abstracts)
A Numerical Procedure for Calculating Combined
Conduction and Radiation Heat Flux Through Fibrous Insulation
(271-295)
Journal of Building Physics 33 #3 (2010)
[Abstract]
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
58.
Journal of Catalysis
270 #1 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
59.
Journal of Chemical & Engineering Data 55 #2 (2010)
(Titles and Abstracts)
Equilibrium Isotherms of the Adsorption of Pyrolysis Gases from Polymer Products
(723–727)
Journal of Chemical & Engineering Data 55 #2 (2010)
Adsorption Behavior of Glucose, Xylose, and Arabinose on Five Different Cation
Exchange Resins
(735–738)
Journal of Chemical & Engineering Data 55 #2 (2010)
Extraction Equilibria of Succinic Acid from Aqueous Solutions by Amberlite LA-2
in Various Diluents
(847–851)
Journal of Chemical & Engineering Data 55 #2 (2010)
Associative Properties of Amphiphilic Statistical Polymers in Aqueous Media
(919–924)
Journal of Chemical & Engineering Data 55 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
60.
Journal of Chemical Information and Modeling 50 #2 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
61.
Journal of Chemical Physics 132 #8 (2010)
(Titles and Abstracts)
Plasticization and antiplasticization of polymer melts diluted by low molar mass
species
(# 084504)
Journal of Chemical Physics 132 #8 (2010)
Charge regularization in phase separating polyelectrolyte solutions
(# 08490)
Journal of Chemical Physics 132 #8 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
62.
Journal of Colloid and Interface Science 344 #1 (2010)
(Titles and Abstracts)
Birefringent physical gels of
N-(4-n-alkyloxybenzoyl)-
(10-20)
Journal of Colloid and Interface Science 344 #1 (2010)
Comparison of protein–polysaccharide
nanoparticle fabrication methods: Impact of biopolymer complexation before or
after particle formation
(21-29)
Journal of Colloid and Interface Science 344 #1 (2010)
Bimetallic Aucore–Agshell
nanoparticles from interfacial redox process using poly(o-methoxyaniline)
(30-36)
Journal of Colloid and Interface Science 344 #1 (2010)
Thermally-triggered gelation of PLGA
dispersions: Towards an injectable colloidal cell delivery system
(61-69)
Journal of Colloid and Interface Science 344 #1 (2010)
Nanostructure of PEO–polyurethane–PEO triblock
copolymer micelles in water
(81-89)
Journal of Colloid and Interface Science 344 #1 (2010)
Anion effects on anti-microbial activity of
poly[1-vinyl-3-(2-sulfoethyl imidazolium betaine)]
(90-96)
Journal of Colloid and Interface Science 344 #1 (2010)
The interaction between multi-charged organic
salts and poly(vinylpyridine) microgel particles
(112-116)
Journal of Colloid and Interface Science 344 #1 (2010)
Systematic study of synergistic and
antagonistic effects on adsorption of tetracycline and copper onto a chitosan
(117-125)
Journal of Colloid and Interface Science 344 #1 (2010)
Adsorption and adsolubilization of
polymerizable surfactants on aluminum oxide
(126-131)
Journal of Colloid and Interface Science 344 #1 (2010)
Fabrication of oriented poly-
(150-157)
Journal of Colloid and Interface Science 344 #1 (2010)
Charge properties of membranes modified by
multilayer polyelectrolyte adsorption
(221-227)
Journal of Colloid and Interface Science 344 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
63.
Journal of Combinatorial Chemistry 12 #1 (2010)
(Titles
and Abstracts)
Novel, High Throughput Method to Study in Vitro Protein Release from Polymer
Nanospheres
(51–56)
Journal of Combinatorial Chemistry 12 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
64.
Journal of
Composite Materials 44 #6 (2010)
(Titles and Abstracts)
A Failure Mechanism of Pressure Vessels from
Filament-wound Hoop Layer
(657-673) Journal
of Composite Materials 44 #6 (2010)
[Abstract]
Effect of Finite Thickness and Free Edges on Stresses
in Plain Weave Composites
(675-692) Journal
of Composite Materials 44 #6 (2010)
[Abstract]
-Radiation
Assisted Fabrication of Hydroxyapatite-Polyacrylamide Nanocomposites with
Possible Application in Bone Implantology
(757-778.) Journal
of Composite Materials 44 #6 (2010)
[Abstract]
A Simplified Empirical Model for Prediction of
Mechanical Properties of Random Short Fiber/Vinylester Composites
(779-788) Journal
of Composite Materials 44 #6 (2010)
[Abstract]
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
65.
Journal of Controlled Release 142 #3 (2010)
(Titles and Abstracts)
γ-Polyglutamic acid-coated vectors for
effective and safe gene therapy
(404-410)
Journal of Controlled Release 142 #3 (2010)
Neuroprotection by biodegradable PAMAM ester
(e-PAM-R)-mediated HMGB1 siRNA delivery in primary cortical cultures and in the
postischemic brain
(422-430)
Journal of Controlled Release 142 #3 (2010)
Paclitaxel-loaded poly(N-vinylpyrrolidone)-b-poly(ε-caprolactone)
nanoparticles: Preparation and antitumor activity
in vivo
(438-446)
Journal of Controlled Release 142 #3 (2010)
Parameter estimation methodology in a model of
hydrophobic drug release from a polymer coating
(474-482)
Journal of Controlled Release 142 #3 (2010)
Hybrid hyaluronan hydrogel encapsulating
nanogel as a protein nanocarrier: New system for sustained delivery of protein
with a chaperone-like function
(483-489)
Journal of Controlled Release 142 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
66.
Journal of Dispersion Science and Technology 31 #3 (2010)
(Titles and Abstracts)
Environmental Application of Chitosan Resins for the Treatment of Water and
Wastewater: A Review
(273 – 288)
Journal of Dispersion Science and Technology 31 #3 (2010)
Synthesis and Evaluation of Homogeneous Sodium Hexadecyl Polyoxypropylene Ether
Sulfates
(307 – 313)
Journal of Dispersion Science and Technology 31 #3 (2010)
Synthesis and Characterization of Functionalized Polyorganosiloxanes Containing
Amino and Fluorocarbon Side Chains
(321 – 326)
Journal of Dispersion Science and Technology 31 #3 (2010)
Preparation and Characterization of Poly (Styrene-Co-Maleic Anhydride)-Modified
Boron Particles
(327 – 331)
Journal of Dispersion Science and Technology 31 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
67.
Journal of Elasticity 99
#1 (2010)
(Titles and Abstracts)
Evolution of Surfaces and the Kinematics of Membranes
(1-17)
Journal of Elasticity 99 #1 (2010)
Equilibrium States of Mechanically Loaded Saturated and Unsaturated Polymer Gels
(39-73)
Journal of Elasticity 99 #1 (2010)
On Special Orthotropy of Paper
(75-83)
Journal of Elasticity 99 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
68.
Journal of Electronic Packaging 131 #4 (2009)
(Titles and Abstracts)
A Modified Flip-Chip LED Packaging Design With Enhanced
Light Coupling Efficiency for Plastic Optical Fiber Networks
(# 041002)
Journal of Electronic Packaging 131 #4 (2009)
Abstract
Numerical Simulation of Thermal Conductivity of Particle
Filled Epoxy Composites
(# 041006)
Journal of Electronic Packaging 131 #4 (2009)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
69.
Journal of Electrostatics 68, #1
(2010)
(Titles and Abstracts)
Polymer track membranes for atmospheric
pressure field extraction of ions from liquid solutions
(96-100)
Journal of Electrostatics 68, #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
70.
Journal of Energetic Materials 28 #1 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Roger D.
Corneliussen
Editor
Telephone: 610 883 0055
rcorneliussen@4spe.org
www.maropolymeronline.com
***********************************
Copyright 2010 by Roger D. Corneliussen.
No part of this transmission is to be duplicated in any manner or forwarded by electronic mail without the express written
permission of Roger D. Corneliussen
**************************************