Copyright 2010 by Roger D. Corneliussen
Below are links to the new articles by journals. A click should take you to the journal website. This is a great variation in where one ends up. In some cases, a click will take you to the issue in other cases a click will take you to the website and you must do a few more clicks to get to the issue. This is controlled by the publisher and not Maro. Fortunately, with a little practice, this should not be a serious problem. (RDC)
All 2020 Entries are listed in
2010 Maro Links
All 2009 Entries are listed in
2009 Maro Links
All 2008 Entries are listed in
2008 Maro Links
Polymer
Track (News)
Updated daily
Week 28 (7/12-7/16)
7/16/2010
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
01.
Accreditation and Quality Assurance 15, #7 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
02.
Advanced Functional Materials 20 #13 (2010)
(Titles and Abstracts)
Lateral Inhomogeneity in the Electronic Structure
of a Conjugated Poly(3-hexylthiophene) Thin Film
(p 2046-2052)
Advanced Functional Materials 20 #13 (2010)
Abstract
Electropolymerization of a Bifunctional Ionic
Liquid Monomer Yields an Electroactive Liquid-Crystalline Polymer
(p 2063-2070)
Advanced Functional Materials 20 #13 (2010)
Abstract
Polarizability, Susceptibility, and Dielectric
Constant of Nanometer-Scale Molecular Films: A Microscopic View
(p 2077-2084)
Advanced Functional Materials 20 #13 (2010)
Abstract
The Impact of Polymer Regioregularity on Charge
Transport and Efficiency of P3HT:PCBM Photovoltaic Devices
(p 2085-2092)
Advanced Functional Materials 20 #13 (2010)
Abstract
Sensitive Explosive Vapor Detection with
Polyfluorene Lasers
(p 2093-2097)
Advanced Functional Materials 20 #13 (2010)
Abstract
Oxidative Inorganic Multilayers for Polypyrrole
Film Generation
(p 2140-2147)
Advanced Functional Materials 20 #13 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
03.
Advanced Materials 22 #25 (2010)
(Titles and Abstracts)
Stretchable Microfluidic Radiofrequency Antennas
(p 2749-2752)
Advanced Materials 22 #25 (2010)
Abstract
Properties of Thiol End-Capped and Iodine-Doped
Sexithiophene Disulfide Semiconducting Polymers Bridging Nanogap Gold
Electrodes
(p 2753-2758)
Advanced Materials 22 #25 (2010)
Abstract
Single-Pore Membranes Gated by
Microelectromagnetic Traps
(p 2759-2763)
Advanced Materials 22 #25 (2010)
Abstract
Hierarchical Surface Patterns of Nanorods
Obtained by Co-Assembly with Block Copolymers in Ultrathin Films
(p 2774-2779)
Advanced Materials 22 #25 (2010)
Abstract
Reversible Diels-Alder Chemistry as a Modular
Polymeric Color Switch
(p 2788-2791)
Advanced Materials 22 #25 (2010)
Abstract
Bulk Electron Transport and Charge Injection in a
High Mobility n-Type Semiconducting Polymer
(p 2799-2803)
Advanced Materials 22 #25 (2010)
Abstract
Selective Assembly of Sub-Micrometer Polymer
Particles
(p 2804-2808)
Advanced Materials 22 #25 (2010)
Abstract
Nanoporous Scaffold with Immobilized Enzymes
during Flow-Induced Gelation for Sensitive H2O2
Biosensing
(p 2809-2813)
Advanced Materials 22 #25 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
04.
Angewandte Chemie
International Edition 49 #30 (2010)
(Titles and Abstracts)
Reversible Three-State Switching of Multicolor
Fluorescence Emission by Multiple Stimuli Modulated FRET Processes within
Thermoresponsive Polymeric Micelles
(p 5120-5124)
Angewandte Chemie International Edition 49 #30 (2010)
Abstract
Inwards Buildup of Concentric Polymer Layers: A
Method for Biomolecule Encapsulation and Microcapsule Encoding
(p 5189-5193)
Angewandte Chemie International Edition 49 #30 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
05.
Applied Catalysis A: General 383 #1-2(2010)
Titles and Abstracts
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
06.
Applied Composite Materials
17 #4 (2010)
(Titles and Abstracts)
Study of Composite Interface Fracture and Crack Growth Monitoring Using Carbon
Nanotubes
(347-362)
Applied Composite Materials 17 #4 (2010)
Natural Weathering and Sea Water Effects on the Durability of Glass Fiber
Reinforced Vinylester: Fractographic Analysis
(363-372)
Applied Composite Materials 17 #4 (2010)
Finite Element Analysis of Mechanical Properties of 3D Four-Directional
Rectangular Braided Composites Part 1: Microgeometry and 3D Finite Element Model
(373-387)
Applied Composite Materials 17 #4 (2010)
Finite Element Analysis of Mechanical Properties of 3D Four-directional
Rectangular Braided Composites—Part 2: Validation of the 3D Finite Element Model
(389-404)
Applied Composite Materials 17 #4 (2010)
Finite Element Dynamic Analysis of Laminated Viscoelastic Structures
(405-414)
Applied Composite Materials 17 #4 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
07.
Applied Physics
Letters 97 #1 (2010)
Titles and Abstracts
Interfacial thermal conductance in spun-cast polymer films and polymer
brushes
(# 011908)
Applied Physics Letters 97 #1 (2010)
Hybrid conjugated polymer solar cells using patterned GaAs nanopillars
(# 013107)
Applied Physics Letters 97 #1 (2010)
Carrier transport mechanisms of organic bistable devices fabricated utilizing
colloidal ZnO quantum dot-polymethylmethacrylate polymer nanocomposites
(# 013304)
Applied Physics Letters 97 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
08.
Applied Surface Science 256 #23 (2010)
(Titles
and Abstracts)
Silane treatment of Fe3O4
and its effect on the magnetic and wear properties of Fe3O4/epoxy
nanocomposites
(6945-6950)
Applied Surface Science 256 #23 (2010)
Synthesis of highly stable silver colloids
stabilized with water soluble sulfonated polyaniline
(7037-7042)
Applied Surface Science 256 #23 (2010)
Polypropylene modified with 2-hydroxyethyl
acrylate-g-2-methacryloyloxyethyl phosphorycholine and its hemocompatibility
(7071-7076)
Applied Surface Science 256 #23 (2010)
Effect of citric acid on photoelectrochemical
properties of tungsten trioxide films prepared by the polymeric precursor method
(7077-7082)
Applied Surface Science 256 #23 (2010)
Room temperature synthesis of water-repellent
polystyrene nanocomposite coating
(7088-7090)
Applied Surface Science 256 #23 (2010)
Changing the adsorption capacity of coal-based
honeycomb monoliths for pollutant removal from liquid streams by controlling
their porosity
(7111-7117)
Applied Surface Science 256 #23 (2010)
Multifractal analysis of fracture morphology of
poly(ethylene-co-vinyl acetate)/carbon black conductive composite
(7151-7155)
Applied Surface Science 256 #23 (2010)
Natural rubber nanocomposites using
polystyrene-encapsulated nanosilica prepared by differential microemulsion
polymerization
(7211-7216)
Applied Surface Science 256 #23 (2010)
Activation energy of water vapor and oxygen
transmission through TiNxOy/PET
gas barrier films
(7242-7245)
Applied Surface Science 256 #23 (2010)
Preparation and fluorescent sensing
applications of novel CdSe–chitosan hybrid films
(7270-7275)
Applied Surface Science 256 #23 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
09.
Biomacromolecules 11 #7 (2010)
(Titles and Abstracts)
Facile Synthesis of β-Cyclodextrin-Dextran Polymers by “Click” Chemistry
(1710–1715)
Biomacromolecules 11 #7 (2010)
Formation and Characterization of Spherelike Bacterial Cellulose Particles
Produced by Acetobacter xylinum JCM 9730 Strain
(1727–1734)
Biomacromolecules 11 #7 (2010)
Feedback Regulated Drug Delivery Vehicles: Carbon Dioxide Responsive Cationic
Hydrogels for Antidote Release
(1735–1740)
Biomacromolecules 11 #7 (2010)
Dual Cross-Linking Systems of Functionally Photo-Cross-Linkable and
Thermoresponsive Polyphosphazene Hydrogels for Biomedical Applications
(1741–1753)
Biomacromolecules 11 #7 (2010)
Lysozyme Uptake by Oxidized Starch Polymer Microgels
(1754–1762)
Biomacromolecules 11 #7 (2010)
Structure, Morphology, and Bioactivity of Biocompatible Systems Derived from
Functionalized Acrylic Polymers Based on 5-Amino-2-naphthalene Sulfonic Acid
(1763–1772)
Biomacromolecules 11 #7 (2010)
Cyanobacterial Polysaccharide Gels with Efficient Rare-Earth-Metal Sorption
(1773–1778)
Biomacromolecules 11 #7 (2010)
Silk Fibroin/Montmorillonite Nanocomposites: Effect of pH on the Conformational
Transition and Clay Dispersion
(1796–1801)
Biomacromolecules 11 #7 (2010)
Biophysical Characterization of Copolymer-Protected Gene Vectors
(1802–1809)
Biomacromolecules 11 #7 (2010)
Interpenetrating Network Hydrogels via Simultaneous “Click Chemistry” and Atom
Transfer Radical Polymerization
(1810–1817)
Biomacromolecules 11 #7 (2010)
Biocatalytic Synthesis of Silicone Polyesters
(1818–1825)
Biomacromolecules 11 #7 (2010)
Injectable pH- and Temperature-Responsive
Poly(N-isopropylacrylamide-co-propylacrylic acid) Copolymers for Delivery of
Angiogenic Growth Factors
(1833–1839)
Biomacromolecules 11 #7 (2010)
Fluorescent Mannose-Functionalized Hyperbranched Poly(amido amine)s: Synthesis
and Interaction with E. coli
(1840–1846)
Biomacromolecules 11 #7 (2010)
Preparation and Characterization of Polymer−Inorganic Nanocomposites by In Situ
Melt Polycondensation of l-Lactic Acid and Surface-Hydroxylated MgO
(1847–1855)
Biomacromolecules 11 #7 (2010)
Thermally Responsive Injectable Hydrogel Incorporating Methacrylate-Polylactide
for Hydrolytic Lability
(1873–1881)
Biomacromolecules 11 #7 (2010)
Shell-Cross-Linked Micelles from PNIPAM-b-(PLL)2 Y-Shaped Miktoarm Star
Copolymer as Drug Carriers
(1882–1890)
Biomacromolecules 11 #7 (2010)
Copolymerization Behavior of N-(2-Hydroxypropyl)methacrylamide and a
Methacrylated Coiled-Coil Peptide Derivative
(1891–1895)
Biomacromolecules 11 #7 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
10.
Biomaterials 31 #26 (2010)
(Titles
and Abstracts)
Biodegradable poly(ethylene glycol) hydrogels
based on a self-elimination degradation mechanism
(6675-6684)
Biomaterials 31 #26 (2010)
The induction of thrombus generation on
nanostructured neutral polymer brush surfaces
( 6710-6718)
Biomaterials 31 #26 (2010)
The effect of immobilized RGD peptide in
macroporous alginate scaffolds on TGFβ1-induced chondrogenesis of human
mesenchymal stem cells
( 6746-6755)
Biomaterials 31 #26 (2010)
Hyaluronic acid hydrogels with controlled
degradation properties for oriented bone regeneration
( 6772-6781)
Biomaterials 31 #26 (2010)
The performance of a hydrogel nucleus pulposus
prosthesis in an ex vivo canine model
( 6782-6788)
Biomaterials 31 #26 (2010)
The biocompatibility and antibacterial
properties of waterborne polyurethane-silver nanocomposites
( 6796-6808)
Biomaterials 31 #26 (2010)
Liposome–polyethylenimine complexes for
enhanced DNA and siRNA delivery
( 6892-6900)
Biomaterials 31 #26 (2010)
**************************************************
Biomaterials 31 #27 (2010)
(Titles
and Abstracts)
Effect of swelling of poly(vinyl alcohol) layers on complement activation
( 6926-6933) Biomaterials 31 #27 (2010)
Directed 3D cell alignment and elongation in microengineered hydrogels
( 6941-6951) Biomaterials 31 #27 (2010)
Cartilage repair using hyaluronan hydrogel-encapsulated human embryonic stem
cell-derived chondrogenic cells
( 6968-6980) Biomaterials 31 #27 (2010)
Electrically induced contraction of C2C12 myotubes cultured on a porous
membrane-based substrate with muscle tissue-like stiffness
( 6981-6986) Biomaterials 31 #27 (2010)
Influence of micro-patterned PLLA membranes on outgrowth and orientation of
hippocampal neurites
( 7000-7011) Biomaterials 31 #27 (2010)
A surface crosslinked UHMWPE stabilized by vitamin E with low wear and high
fatigue strength
( 7051-7060) Biomaterials 31 #27 (2010)
Long-term in vivo biodistribution imaging and toxicity of polyacrylic
acid-coated upconversion nanophosphors
( 7078-7085) Biomaterials 31 #27 (2010)
Preservation of dendritic cell function upon labeling with amino
functionalized polymeric nanoparticles
( 7086-7095( Biomaterials 31 #27 (2010)
Highly temperature-sensitive liposomes based on a thermosensitive block
copolymer for tumor-specific chemotherapy
( 7096-7105) Biomaterials 31 #27 (2010)
Curcumin polymers as anticancer conjugates
( 7139-7149) Biomaterials 31 #27 (2010)
Degradable, pH-sensitive, membrane-destabilizing, comb-like polymers for
intracellular delivery of nucleic acids
( 7150-7166) Biomaterials 31 #27 (2010)
Tuning the mechanical properties of bioreducible multilayer films for
improved cell adhesion and transfection activity
( 7167-7174) Biomaterials 31 #27 (2010)
The use of microfiber composites of elastin-like protein matrix reinforced
with synthetic collagen in the design of vascular grafts
( 7175-7182) Biomaterials 31 #27 (2010)
Surface morphology optimization for osseointegration of coated implants
( 7196-7204) Biomaterials 31 #27 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
11.
Catalysis Communications 11 #13 (2009)
(Titles
and Abstracts)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
12.
Catalysis
Today
153, #1-2 (2010)
(Titles and Abstracts)
No articles selected
**************************************************
Catalysis
Today
153, #3-4 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
13.
Cellulose
17 #4 (2010)
(Titles and Abstracts)
Structure conversions of cellulose IIII crystal models in solution
state: a molecular dynamics study
(679-691)
Cellulose 17 #4 (2010)
The glass transition and crystallization of ball milled cellulose
(693-709)
Cellulose 17 #4 (2010)
Mechanism of microfibril contraction and anisotropic dimensional changes for
cells in wood treated with aqueous NaOH solution
(711-719)
Cellulose 17 #4 (2010)
Cellulose I crystallinity determination using FT–Raman spectroscopy: univariate
and multivariate methods
(721-733)
Cellulose 17 #4 (2010)
Time-resolved X-ray diffraction microprobe studies of the conversion of
cellulose I to ethylenediamine-cellulose I
(735-745)
Cellulose 17 #4 (2010)
Characterisation of amino acid modified cellulose surfaces using ToF-SIMS and
XPS
(747-756)
Cellulose 17 #4 (2010)
Controlled accessibility Lewis acid catalysed thermal reactions of regenerated
cellulosic fibres
(757-770)
Cellulose 17 #4 (2010)
Thermo-mechanical properties of microfibrillated cellulose-reinforced partially
crystallized PLA composites
(771-778)
Cellulose 17 #4 (2010)
Self-reinforced cellulose nanocomposites
(779-791)
Cellulose 17 #4 (2010)
Reinforcing effect of carboxymethylated nanofibrillated cellulose powder on
hydroxypropyl cellulose
(793-802)
Cellulose 17 #4 (2010)
Blend films of natural wool and cellulose prepared from an ionic liquid
(803-813)
Cellulose 17 #4 (2010)
Towards unnatural xylan based polysaccharides: reductive amination as a tool to
access highly engineered carbohydrates
(825-833)
Cellulose 17 #4 (2010)
The effect of chemical composition on microfibrillar cellulose films from wood
pulps: water interactions and physical properties for packaging applications
(835-848)
Cellulose 17 #4 (2010)
Bleaching cellulosic fibers via pre-sorption of N-[4-(triethylammoniomethyl)-benzoyl]-butyrolactam
chloride
(849-857)
Cellulose 17 #4 (2010)
Flame retardant finishing of cotton fleece: part VII. Polycarboxylic acids with
different numbers of functional group
(859-870)
Cellulose 17 #4 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
14.
Chemical Communications #28 (2010)
(Titles, Abstracts and Articles)
Tailoring dendronized polymers
(5049 - 5060)
Chemical Communications #28 (2010)
Spin crossover-macromolecule composite nano film material
(5073 - 5075)
Chemical Communications #28 (2010)
Analyte-induced aggregation of conjugated polyelectrolytes: role of the charged
moieties and its sensing application
(5094 - 5096)
Chemical Communications #28 (2010)
A polyoxometalate-encapsulated 3D porous metal–organic pseudo-rotaxane
framework
(5097 - 5099)
Chemical Communications #28 (2010)
Fabrication of asymmetric
Janus
particles via plasma polymerization
(5121 - 5123)
Chemical Communications #28 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
15.
Chemical Engineering Science 65 #16 (2010)
(Titles and Abstracts) (T)
Experiments and simulations of cohesionless
particles with varying roughness in a bladed mixer
(4557-4571)
Chemical Engineering Science 65 #16 (2010)
Bead formation near the contact line in forced
spreading
(4572-4578)
Chemical Engineering Science 65 #16 (2010)
Using poly(N,N-dimethylaminoethyl
methacrylate)/polyacrylonitrile composite membranes for gas dehydration and
humidification
(4672-4681)
Chemical Engineering Science 65 #16 (2010)
Predictive control of surface mean slope and
roughness in a thin film deposition process
(4720-4731)
Chemical Engineering Science 65 #16 (2010)
************************************************
Chemical Engineering Science 65 #17 (2010)
(Titles and Abstracts) (T)
Parameter estimation strategies in batch
emulsion polymerization
(4967-4982)
Chemical Engineering Science 65 #17 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
16.
Chemical Physics Letters 494 #4-6 (2010)
(Titles and Abstracts)
Paramagnetic polyaniline nanospheres
(232-236)
Chemical Physics Letters 494 #4-6 (2010)
Preparation of extended alkylated graphene
oxide conducting layers and effect study on the electrical properties of
PEDOT:PSS polymer composites
(264-268)
Chemical Physics Letters 494 #4-6 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
17.
Chemical
Week
Titles and Abstracts) Weekly (H)
Trade
Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
18.
Chemistry of Materials 22 #13 (2010)
(Titles
and Abstracts)
Silicon-Containing Polyimide-Based Polymers with High Temperature Stability
(3823–3825)
Chemistry of Materials 22 #13 (2010)
Hollow Carved Single-Crystal Mesoporous Silica Templated by Mesomorphous
Polyelectrolyte−Surfactant Complexes
(3829–3831)
Chemistry of Materials 22 #13 (2010)
Understanding the Supramolecular Self-Assembly of Zirconium Titanate Mesophases
Formed from the Poly(ethylene oxide) Surfactant Brij-58
(3832–3842)
Chemistry of Materials 22 #13 (2010)
Flexible, Adhesive, and Biocompatible Bragg Mirrors Based on
Polydimethylsiloxane Infiltrated Nanoparticle Multilayers
(3909–3915)
Chemistry of Materials 22 #13 (2010)
Synthesis and Optical Properties of a Rod−Coil Diblock Copolymer with
Polyoxometalate Clusters Covalently Attached to the Coil Block
(3995–4006)
Chemistry of Materials 22 #13 (2010)
Effects of Monomer Composition on CO2−Selective Polymer Brush Membranes
(4026–4033)
Chemistry of Materials 22 #13 (2010)
Donor−Acceptor Polymer Electrochromes with Tunable Colors and Performance
(4034–4044)
Chemistry of Materials 22 #13 (2010)
Hierarchical Control of Polymer Composite Nano- and Micro-Structure with
Lithography
(4069–4075)
Chemistry of Materials 22 #13 (2010)
Polypropylene/Graphene Oxide Nanocomposites Prepared by In Situ Ziegler−Natta
Polymerization
(4096–4102)
Chemistry of Materials 22 #13 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
19.
Colloids and Surfaces A: Physicochemical and Engineering Aspects 365 #1-3 (2010)
(Titles and Abstracts)
Triblock copolymers as destabilizers of
water-in-crude oil emulsions
(162-170)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 365 #1-3 (2010)
**************************************************
Colloids and Surfaces A: Physicochemical and Engineering Aspects 366 #1-3 (2010)
(Titles and Abstracts)
Spherical hydroxyapatite with colloidal
stability prepared in aqueous solutions containing polymer/surfactant pair
(27-33)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 366 #1-3 (2010)
Hybrid additives for construction applications,
fabricated through layer-by-layer adsorption of polycondensate type
superplasticizers on latex templates
(38-44)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 366 #1-3 (2010)
Fabrication and characterization of poly(vinyl
alcohol)/alginate blend nanofibers by electrospinning method
(135-140)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 366 #1-3 (2010)
Fine-tuning of functional
poly(methylmethacrylate) nanoparticle size at the sub-100 nm scale using
surfactant-free emulsion polymerization
(141-146)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 366 #1-3 (2010)
Kinetics and optical properties of the silver
nanoparticles in aqueous L64 block copolymer solutions
(155-162)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 366 #1-3 (2010)
Electrochemical behaviors of nanoporous
coordination polymer multilayers in hexacyanoferrate solution
(183-190)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 366 #1-3 (2010)
Characterization of the monolayers prepared
from emulsions and its effect on retardation of water evaporation on the plastic
concrete surface
(208-212)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 366 #1-3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
20.
Combustion Science and Technology 182 #7 (2010)
(Titles
and Abstracts) S
Gas Diffusion in Fractal Porous Media
(822 – 841)
Combustion Science and Technology 182 #7 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
21.
Combustion
Theory and Modelling 14 #3 (2010)
(Titles and Abstracts) S
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
22.
Composites
Science and Technology 70 #10 (2010)
(Titles and Abstracts)
Effect of organic modification of sepiolite for
PA 6 polymer/organoclay nanocomposites
(1429-1436)
Composites
Science and Technology 70 #10 (2010)
Properties and mechanism of two-way shape
memory polyurethane composites
(1437-1443)
Composites
Science and Technology 70 #10 (2010)
High resolution tomographic imaging and
modelling of notch tip damage in a laminated composite
(1444-1452)
Composites
Science and Technology 70 #10 (2010)
Investigation on the dispersion of carbon
nanotubes in nitrile butadiene rubber: Role of polymer-to-filler grafting
reaction
(1453-1459)
Composites
Science and Technology 70 #10 (2010)
Probing deformation of double-walled carbon
nanotube (DWNT)/epoxy composites using FTIR and Raman techniques
(1460-1468)
Composites
Science and Technology 70 #10 (2010)
Visible-light photocatalytic activity of
semiconductor composites supported by electrospun fiber
(1469-1475)
Composites
Science and Technology 70 #10 (2010)
Thermo-viscoelastic analysis of the integrated
T-shaped composite structures
(1497-1503)
Composites
Science and Technology 70 #10 (2010)
Intralaminar and interlaminar damage in
quasi-unidirectional stratified composite structures: Experimental analysis
(1504-1512)
Composites
Science and Technology 70 #10 (2010)
Analytical and experimental studies on the
low-velocity impact response and damage of composite laminates under in-plane
loads with structural damping effects
(1513-1522)
Composites
Science and Technology 70 #10 (2010)
Study on interfacial adhesion strength of
single glass fibre/polypropylene model composites by altering the nature of the
surface of sized glass fibres
(1523-1529)
Composites
Science and Technology 70 #10 (2010)
Modelling of the carbon nanotube bridging
effect on the toughening of polymers and experimental verification
(1537-1543)
Composites
Science and Technology 70 #10 (2010)
Electrical conductivity of ion-doped graphite/polyethersulphone
composites
(1544-1549)
Composites
Science and Technology 70 #10 (2010)
Improving the mechanical properties of
thermoplastic starch/poly(vinyl alcohol)/clay nanocomposites
(1557-1563)
Composites
Science and Technology 70 #10 (2010)
Highly strong and conductive carbon nanotube/cellulose
composite paper
(1564-1570)
Composites
Science and Technology 70 #10 (2010)
Effects of carboxyl radical on electrical
resistance of multi-walled carbon nanotube filled silicone rubber composite
under pressure
(1571-1573)
Composites
Science and Technology 70 #10 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
23.
Construction
and Building Materials
24 #11 (2010)
(Titles and Abstracts)
A review of the fresh/hardened properties and
applications for plain- (PRC) and self-compacting rubberised concrete (SCRC)
(2043-2051)
Construction
and Building Materials
24 #11 (2010)
The effect of elevated temperatures on corroded
and uncorroded reinforcement embedded in mortar
(2101-2107)
Construction
and Building Materials
24 #11 (2010)
Masonry wallettes with damp-proof course
membrane subjected to cyclic shear: An experimental study
(2135-2144)
Construction
and Building Materials
24 #11 (2010)
Assessment of the effects of rice husk ash
particle size on strength, water permeability and workability of binary blended
concrete
(2145-2150)
Construction
and Building Materials
24 #11 (2010)
An experimental study on fatigue properties of
emulsion and foam cold recycled mixes
(2151-2156)
Construction
and Building Materials
24 #11 (2010)
Investigation of the use of strip-prone
aggregates in hydraulic asphalt concrete
(2157-2163)
Construction
and Building Materials
24 #11 (2010)
Effect of the addition of synthetic fibers to
concrete thin slabs on plastic shrinkage cracking
(2171-2176)
Construction
and Building Materials
24 #11 (2010)
Chemical–physical behaviour of matt waste in
cement mixtures
(2194-2199)
Construction
and Building Materials
24 #11 (2010)
Flexural retrofitting of RC beams using
external bars at soffit level – An experimental study
(2208-2216)
Construction
and Building Materials
24 #11 (2010)
Analysis of adhesive joints used to bond FRP
laminates to steel members – A numerical and experimental study
(2243-2251)
Construction
and Building Materials
24 #11 (2010)
A model for resilient modulus determination of
recycled mixes with bitumen emulsion and cement from ITS testing results
(2252-2259)
Construction
and Building Materials
24 #11 (2010)
Some mechanical properties and decay resistance
of wood impregnated with environmentally-friendly borates
(2279-2284)
Construction
and Building Materials
24 #11 (2010)
Deflection behavior of concrete beams
reinforced with PVA micro-fibers
(2285-2293)
Construction
and Building Materials
24 #11 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
24.
Dalton Transactions #28 (2010)
(Titles
and Abstracts)
Coordination polymerization of renewable butyrolactone-based vinyl monomers by
lanthanide and early metal catalysts
(6710 - 6718)
Dalton Transactions #28 (2010)
Synthesis of samarium(II) borohydrides and their behaviour as
initiators in styrene and
-caprolactone
polymerisation
(6761 - 6766)
Dalton Transactions #28 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
25.
Drying Technology 28 #7 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
26.
Engineering Failure Analysis 17 #6 (2010)
(Titles
and Abstracts)
Assessment of performance capability of turbine
blades with protective coatings after overheating events
(1389-1396)
Engineering Failure Analysis 17 #6 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
27.
Engineering Fracture Mechanics 77 #12 (2010)
(Titles and Abstracts)
Crack paths in composite materials
(2251-2262)
Engineering Fracture Mechanics 77 #12 (2010)
Creep rupture and viscoelastoplasticity of
polypropylene
(2277-2293)
Engineering Fracture Mechanics 77 #12 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
28.
Environmental
Science & Technology 44 #14 (2010)
(Titles
and Abstracts)
Trophodynamics of Hexabromocyclododecanes and Several Other Non-PBDE Brominated
Flame Retardants in a Freshwater Food Web
(5490–5495)
Environmental Science & Technology 44 #14 (2010)
Photocatalytic Antibacterial Capabilities of TiO2−Biocidal Polymer
Nanocomposites Synthesized by a Surface-Initiated Photopolymerization
(5672–5676)
Environmental Science & Technology 44 #14 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
29.
European Journal of Physics 31 #5 (2010)
(Titles
and Abstracts; Full PDF versions of Articles are available free for 30 days after
publication)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
30.
Fluid
Phase Equilibria 296 #1 (2010)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
31.
Heat Transfer Engineering 31 #14 (2010)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
32.
Industrial &
Engineering Chemistry Research 49 #14 (2010)
(Titles and Abstracts) (T)
Effects of Macromolecular Compatibilizers Containing Epoxy Groups on the
Properties of Linear Low-Density Polyethylene/Magnesium Hydroxide Composites
(6291–6301) Industrial
& Engineering Chemistry Research 49 #14 (2010)
Effect of Surface Substrate Roughness and of Chelating Agent on the
Microstructure and Mechanical Properties of Electroless Processed Brass Coatings
(6388–6393) Industrial
& Engineering Chemistry Research 49 #14 (2010)
Synergetic Effect of Dual Compatibilizers on in Situ Formed Poly(Lactic
Acid)/Soy Protein Composites
(6399–6406) Industrial
& Engineering Chemistry Research 49 #14 (2010)
Effect of Cross-Linking Fiber Joints on the Tensile and Fracture Behavior of
Paper
(6422–6431) Industrial
& Engineering Chemistry Research 49 #14 (2010)
Production of Coated Papers with Improved Properties by Using a Water-Soluble
Chitosan Derivative
(6432–6438) Industrial
& Engineering Chemistry Research 49 #14 (2010)
Gas Permeation Behavior of Pebax-1657 Nanocomposite Membrane Incorporated with
Multiwalled Carbon Nanotubes
(6530–6538) Industrial
& Engineering Chemistry Research 49 #14 (2010)
Extraction of Aleuritic Acid from Seedlac and Purification by Reactive
Adsorption on Functionalized Polymers
(6547–6553) Industrial
& Engineering Chemistry Research 49 #14 (2010)
Synergistic Solvent Impregnated Resin for Adsorptive Separation of Lithium Ion
(6554–6558) Industrial
& Engineering Chemistry Research 49 #14 (2010)
Parametric Studies on Radiation Grafting of Polymeric Sorbents for Recovery of
Heavy Metals from Seawater
(6559–6565) Industrial
& Engineering Chemistry Research 49 #14 (2010)
Changes in Gas-Transport Properties with the Phase Structure of Blends
Containing Styrene−Butadiene−Styrene Triblock Copolymer and
Poly(2,6-dimethyl-1,4-phenylene oxide)
(6587–6592) Industrial
& Engineering Chemistry Research 49 #14 (2010)
Two-Dimensional Property Distributions, Ohmic Losses, and Power Consumption
within a Fuel Cell Polymer Electrolyte Membrane
(6612–6621) Industrial
& Engineering Chemistry Research 49 #14 (2010)
Experimental Study of Mass Transfer in Membrane Absorption Process Using
Membranes with Different Porosities
(6641–6648) Industrial
& Engineering Chemistry Research 49 #14 (2010)
Covalently Anchored Polymer Immobilized Co(II) Phthalocyanine as Efficient
Catalyst for Oxidation of Mercaptans using Molecular Oxygen as Oxidant
(6674–6677) Industrial
& Engineering Chemistry Research 49 #14 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
33.
International Journal of Fatigue 32 #11 (2010)
(Titles and Abstracts)
Modelling the fatigue behaviour of composites
honeycomb materials (aluminium/aramide fibre core) using four-point bending
tests
(1739-1747)
International Journal of Fatigue 32 #11 (2010)
A fatigue degradation law for cohesive
interface elements – Development and application to composite materials
(1774-1787)
International Journal of Fatigue 32 #11 (2010)
Uniaxial tension–compression fatigue behavior
and fiber bridging degradation of strain hardening fiber reinforced cementitious
composites
(1812-1822)
International Journal of Fatigue 32 #11 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
34.
International Journal of Non-Linear Mechanics 44 #7 (2010)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
35.
International Polymer Processing #3 (2010)
(Titles and Abstracts)
Improvement in the Scratch Resistance of Polymers by Roller Burnishing Process
(176-180) International Polymer Processing #3 (2010)
Effect of Processing Conditions on the Dispersion of Vapor Grown Carbon Fiber in
a Polyamide 6 and the Crystalline Structure of their Composites by Melt
Compounding
( 181-187) International Polymer Processing #3 (2010)
Dynamics of Filler Size and Spatial Distribution in a Plasticating Single Screw
Extruder – Modeling and Experimental Observations
( 188-198) International Polymer Processing #3 (2010)
Modification of Polyester Fibers by Bactericides Using Crazing Mechanism
( 199-204) International Polymer Processing #3 (2010)
An Assessment of Erosion Wear Response of SiC Filled Epoxy Composites Reinforced
with Glass and Bamboo Fibers
( 205-222) International Polymer Processing #3 (2010)
A Global Model for Closely Intermeshing Counter-rotating Twin Screw Extruders
with Flood Feeding
( 223-235) International Polymer Processing #3 (2010)
Effects of Injection Molding Holding Pressure on the Replication of Surface
Microfeatures
( 236-241) International Polymer Processing #3 (2010)
Scaling-up a Reactive Extrusion Operation: A One-dimensional Simulation Analysis
( 242-250) International Polymer Processing #3 (2010)
Modeling of Agglomerate Dispersion in Single Screw Extruders
( 251-257) International Polymer Processing #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
36.
International Polymer Science and Technology 37, #2 (2010)
(Titles and Abstracts) (H)
SILICONE RUBBERS IN MEDICAL APPLICATIONS -
FRICTION REDUCTION WITH LSR TOP COAT
(T/1-T/4)
International Polymer Science and Technology 37, #2 (2010)
MAIN DIRECTIONS OF SCIENTIFIC RESEARCH ON
ANIONIC-POLYMERISED POLYMERS
(T/5-T/11)
International Polymer Science and Technology 37, #2 (2010)
LOW-MOLECULAR-WEIGHT POLYDIENES: SYNTHESIS,
PROPERTIES, MODIFICATION, AND APPLICATION
(T/13-T/15)
International Polymer Science and Technology 37, #2 (2010)
VULCANISATION OF HYDROGENATED BUTADIENE-ACRYLONITRILE
RUBBERS WITH QUINOLIC ETHER
(T/17-T/19)
International Polymer Science and Technology 37, #2 (2010)
STABILITY OF OZONIDE RINGS IN UNSATURATED
POLYMERS DURING LATEX OZONISATION
(T/21-T/T23)
International Polymer Science and Technology 37, #2 (2010)
RHEOLOGY OF THE CURING OF FILLED (VINYLDIMETHYLSILOXY)POLYDIMETHYL
SILOXANES
(T/25-T/28)
International Polymer Science and Technology 37, #2 (2010)
OLIGOMERIC DERIVATIVES OF RESORCINOLS IN THE
COMPOSITION OF TYRE RUBBERS
(T/29-T/31)
International Polymer Science and Technology 37, #2 (2010)
NANOPRENE AND THE SERVICE LIFE OF TYRES
(T/33-T/35)
International Polymer Science and Technology 37, #2 (2010)
EFFECT OF ANTI-ADHESIVE LUBRICANTS ON THE
QUALITY OF RUBBERY HEAT-SHIELDING COATINGS
(T/37-T/42)
International Polymer Science and Technology 37, #2 (2010)
IMPROVEMENT IN THE QUALITY OF MANUFACTURE OF
LOW-FUEL-PERMEABILITY HOSING
(T/43-T/45)
International Polymer Science and Technology 37, #2 (2010)
MAGNETORHEOLOGY OF MAGNETIC COMPOSITE GELS
(T/47-T/54)
International Polymer Science and Technology 37, #2 (2010)
************************************************
International Polymer Science and Technology 37, #3 (2010)
(Titles and Abstracts) (H)
POLYMERISATION KINETICS AND MOLECULAR
CHARACTERISTICS OF 'NEODYMIUM' POLYBUTADIENE: INFLUENCE OF HALOGENATING AGENT
CONCENTRATION
(T/1-5)
International Polymer Science and Technology 37, #3 (2010)
PRODUCTION OF BUTYL RUBBER BY SUSPENSION
POLYMERISATION USING A MODIFIED CATALYTIC SYSTEM
(T/7-10)
International Polymer Science and Technology 37, #3 (2010)
POLYMERISATION OF ISOPRENE ON A
SODIUM-MAGNESIUM CATALYTIC SYSTEM. INFLUENCE OF THE POLYMERISATION CONDITIONS ON
THE MICROSTRUCTURE AND MOLECULAR WEIGHT CHARACTERISTICS OF 3,4-POLYISOPRENE
(T/11-14)
International Polymer Science and Technology 37, #3 (2010)
INFLUENCE OF THE MACROMOLECULAR STRUCTURE OF
POLYMERS ON THE PROPERTIES OF MULTICOMPONENT THERMOPLASTIC ELASTOMER COMPOSITES
(T/15-19)
International Polymer Science and Technology 37, #3 (2010)
PRODUCTION OF MODIFIERS OF THE RESORCINOL-UROTROPIN
TYPE ON THE BASIS OF NEW NITROGEN-CONTAINING HETERORINGS
(T/21-23)
International Polymer Science and Technology 37, #3 (2010)
LIQUID-PHASE FILLING OF SOLUTION
BUTADIENE-STYRENE RUBBERS WITH SILICAS
(T/25-27)
International Polymer Science and Technology 37, #3 (2010)
NEW TECHNOLOGICALLY ACTIVE ADDITIVES FOR RUBBER
MIXES BASED ON BUTADIENE-ACRYLONITRILE RUBBERS
(T/29-32)
International Polymer Science and Technology 37, #3 (2010)
STUDY OF THE REACTIVITY OF TETRAALKOXYSILANES
ON INTERACTION WITH SILOXANOLS
(T/33-36)
International Polymer Science and Technology 37, #3 (2010)
PRODUCTION OF A RUBBER-MIX SOFTENER BY
PYROLYSIS OF USED TYRES
(T/37-40)
International Polymer Science and Technology 37, #3 (2010)
PREDICTING THE FATIGUE LIFE OF PNEUMATIC TYRES
(T/41-45)
International Polymer Science and Technology 37, #3 (2010)
COARSE GRAINED SIMULATION STUDY FOR THE SURFACE
AND INTERFACE OF THE POLYMERIC MATERIALS
(T/47-52)
International Polymer Science and Technology 37, #3 (2010)
*******************************************
International Polymer Science and Technology 37, #4 (2010)
(Titles and Abstracts) (H)
POLYMERISATION OF DIENES IN THE PRESENCE OF A
COBALT CATALYST WITH THE PARTICIPATION OF METHYLALUMOXANE
(T/1-T/3)
International Polymer Science and Technology 37, #4 (2010)
EFFECT OF TEMPERATURE ON THE KINETIC PARAMETERS
OF POLYMERISATION AND THE MOLECULAR STRUCTURAL CHARACTERISTICS OF POLYBUTADIENE
PRODUCED IN THE PRESENCE OF A LITHIUM-CONTAINING INITIATING SYSTEM
(T/5-T/8)
International Polymer Science and Technology 37, #4 (2010)
THE QUALITY OF FLUORINE-CONTAINING RUBBER SK-26
(T/9-T/12)
International Polymer Science and Technology 37, #4 (2010)
INFLUENCE OF THE STORAGE AND AGEING CONDITIONS
ON THE RHEOLOGICAL PROPERTIES OF BUTADIENE-ACRYLONITRILE COPOLYMERS
(T/13-T/17)
International Polymer Science and Technology 37, #4 (2010)
EFFECT OF THE PARTIAL CROSSLINKING OF TERNARY
ETHYLENE-PROPYLENE RUBBER (SKEPT) ON THE ELASTIC STRENGTH PROPERTIES OF
POLYPROPYLENE-SKEPT BLENDS
(T/19-T/22)
International Polymer Science and Technology 37, #4 (2010)
POLYMER COMPOSITES WITH LAYERED SILICATES BASED
ON ISOPRENE RUBBER
(T/23-T/26)
International Polymer Science and Technology 37, #4 (2010)
STUDY OF AEROSOL FILTRATION IN A BED OF POROUS
CARBON GRANULES
(T/27-T/31)
International Polymer Science and Technology 37, #4 (2010)
FEATURES OF THE SYNTHESIS AND EFFICIENCY OF
STABILISING SYSTEMS
(T/33)
International Polymer Science and Technology 37, #4 (2010)
EFFECT OF TECHNOLOGICALLY ACTIVE ADDITIVES ON
THE PROPERTIES OF CABLE INSULATION RUBBERS
(T/35-T/37)
International Polymer Science and Technology 37, #4 (2010)
DEVELOPMENT OF THE FORMULATION FOR A
WATER-SWELLING SEALANT
(T/39-T/41)
International Polymer Science and Technology 37, #4 (2010)
MODELLING THE VULCANISATION OF POROUS RUBBER
GOODS
(T/43-T/45)
International Polymer Science and Technology 37, #4 (2010)
RECYCLING OF USED PNEUMATIC TYRES
(T/47-T/50)
International Polymer Science and Technology 37, #4 (2010)
EFFECT OF HUMIDITY ON IONIC CONDUCTIVITY OF
NR/POLYETHER ELECTROLYTE BLENDS WITH MICROSCALE SEA-ISLAND PHASE SEPARATION
(T/51-T/59)
International Polymer Science and Technology 37, #4 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
37.
Inverse
Problems
26 #6 (2010)
(Titles
and Abstracts; Full PDF versions of Articles are available free for 30 days
after publication)
A
nonlinear inverse problem in estimating the polymerization heat source of bone
cements by an iterative regularization method
(#
065009)
Inverse
Problems
26 #6 (2010)
*************************************************
Inverse
Problems
26 #7 (2010)
(Titles
and Abstracts; Full PDF versions of Articles are available free for 30 days
after publication)
No articles selected
*************************************************
Inverse
Problems
26 #8 (2010)
(Titles and Abstracts; Full PDF versions of Articles are available free for 30
days after publication)
No articles selected
************************************************
Inverse
Problems
26 #9 (2010)
(Titles
and Abstracts; Full PDF versions of Articles are available free for 30 days
after publication)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
38.
Inverse Problems in Science and Engineering 18, #5 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
39.
The
Journal of Adhesion
86 #5&6 (2010)
(Titles
and Abstracts)
Reliability of Fine-Pitch Flip-Chip (COG) Bonding with Non-Conductive Film Using
Ultrasonic Energy
(470 – 479)
The
Journal of Adhesion
86 #5&6 (2010)
Local Stress Analysis of the Fatigue Behaviour of Adhesively Bonded Thick
Composite Laminates
(480 – 500)
The
Journal of Adhesion
86 #5&6 (2010)
Effect of Piezoelectric Patches on the Behavior of Adhesively Bonded Single Lap
Joints
(601 – 629)
The
Journal of Adhesion
86 #5&6 (2010)
Repair of Wood Trusses Loaded in Tension with Adhesively Bonded Carbon-Epoxy
Patches
(630 – 648)
The
Journal of Adhesion
86 #5&6 (2010)
Adhesively Bonded Repair Proposal for Wood Members Damaged by Horizontal Shear
Using Carbon-Epoxy Patches
(649 – 670)
The
Journal of Adhesion
86 #5&6 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
40.
Journal of Adhesion
Science and Technology 24, #6 (2010)
(Titles and Abstracts)
Modification of Glass Fiber-Reinforced Epoxy with Amine Functional Aniline
Formaldehyde Condensate (AFAFC)
(1031-1043)
Journal of Adhesion
Science and Technology 24, #6 (2010)
The Effects of Roughness on Adhesion Hysteresis
(1045-1054)
Journal of Adhesion
Science and Technology 24, #6 (2010)
Preparation of a Nickel Ion Containing Langmuir-Blodgett Multilayer and an
Ultra-Thin Nickel Film Deposited on an Interpenetrating Polymer Network
Substrate
(1055-1062)
Journal of Adhesion
Science and Technology 24, #6 (2010)
The Effect of Tungsten Sulfide Fullerene-Like Nanoparticles on the Toughness of
Epoxy Adhesives
(1083-1095)
Journal of Adhesion
Science and Technology 24, #6 (2010)
Rheological Behaviour of Nanoreinforced Epoxy Adhesives of Low Electrical
Resistivity for Joining Carbon Fiber/Epoxy Laminates
(1097-1112)
Journal of Adhesion
Science and Technology 24, #6 (2010)
Studies of the Mechanical Properties and Practical Coating Adhesion on PP
Modified by Oxidized Wax
(1113-1129)
Journal of Adhesion
Science and Technology 24, #6 (2010)
The Influence of pH on the Hydrolysis Process of γ-Methacryloxypropyltrimethoxysilane,
Analyzed by FT-IR, and the Silanization of Electrogalvanized Steel
(1131-1143)
Journal of Adhesion
Science and Technology 24, #6 (2010)
Adhesion Promoting Polymer Interlayers for Ag Layers Deposited in OLED
Processing
(1145-1151)
Journal of Adhesion
Science and Technology 24, #6 (2010)
Surface Modification of Poly(biphenyl dianhydride-para-phenylene diamine) (BPDA-PDA)
and Poly(pyromellitic dianhydride-oxydianiline) (PMDA-ODA) Polyimides with UV
Photo-Oxidation
(1153-1166)
Journal of Adhesion
Science and Technology 24, #6 (2010)
Atmospheric-Pressure Plasma Amination of Polymer Surfaces
(1167-1180)
Journal of Adhesion
Science and Technology 24, #6 (2010)
One-Step Deposition Process to Obtain Nanostructured Superhydrophobic Thin Films
by Galvanic Exchange Reactions
(1181-1189)
Journal of Adhesion
Science and Technology 24, #6 (2010)
**************************************************
Journal of Adhesion
Science and Technology 24, #7 (2010)
(Titles and Abstracts)
Capability of Differently Charged Plasma Polymer Coatings for Control of Tissue
Interactions with Titanium Surfaces
(1191-1205)
Journal of Adhesion
Science and Technology 24, #7 (2010)
Modeling of Biologically Inspired Adhesive Pads Using Monte Carlo Analysis
(1207-1220)
Journal of Adhesion
Science and Technology 24, #7 (2010)
Spray Deposition Methods for Improving Interfacial Strength of Copper-Epoxy
Systems
(1221-1238)
Journal of Adhesion
Science and Technology 24, #7 (2010)
Modification of Chemlok 607 for Bonding Steel to Fluororubber
(1239-1249)
Journal of Adhesion
Science and Technology 24, #7 (2010)
Behaviour of Bi-adhesive Joints
(1251-1281)
Journal of Adhesion
Science and Technology 24, #7 (2010)
Plasma Surface Modification of PMMA for Optical Applications
(1283-1289)
Journal of Adhesion
Science and Technology 24, #7 (2010)
Influence of nm-Thick Atmospheric Plasma Deposited Coatings on the Adhesion of
Silicone Elastomer to Stainless Steel
(1291-1302)
Journal of Adhesion
Science and Technology 24, #7 (2010)
Investigation of a Critical Irradiance Criterion for Minimizing the Cure Time of
a PAW Joint
(1303-1317)
Journal of Adhesion
Science and Technology 24, #7 (2010)
Accelerating vs Constant Rate of Insertion in Wood Dowel Welding
(1319-1328)
Journal of Adhesion
Science and Technology 24, #7 (2010)
Ultra-Thin Polymer Layer Deposition by Aerosol-Dielectric Barrier Discharge (DBD)
and Electrospray Ionization (ESI) at Atmospheric Pressure
(1329-1350)
Journal of Adhesion
Science and Technology 24, #7 (2010)
*************************************************
Journal of Adhesion
Science and Technology 24, #8 (2010)
(Titles and Abstracts)
Emulsion Polymer Isocyanates as Wood Adhesive: A Review
(1357-1381)
Journal of Adhesion
Science and Technology 24, #8 (2010)
Chemical Changes Induced by High-Speed Rotation Welding of Wood — Application to
Two Canadian Hardwood Species
(1383-1400)
Journal of Adhesion
Science and Technology 24, #8 (2010)
Modification of Sugar Maple (Acer saccharum) and Black Spruce (Picea
mariana) Wood Surfaces in a Dielectric Barrier Discharge (DBD) at
Atmospheric Pressure
(1401-1413)
Journal of Adhesion
Science and Technology 24, #8 (2010)
Melamine-Formaldehyde Resins without Urea for Wood Panels
(1415-1422)
Journal of Adhesion
Science and Technology 24, #8 (2010)
Wood-Dowel Bonding by High-Speed Rotation Welding — Application to Two Canadian
Hardwood Species
(1423-1436)
Journal of Adhesion
Science and Technology 24, #8 (2010)
Influence of the Degree of Condensation on the Radial Penetration of
Urea-Formaldehyde Adhesives into Silver Fir (Abies alba, Mill.) Wood
Tissue
(1437-1453)
Journal of Adhesion
Science and Technology 24, #8 (2010)
Optimization of the Synthesis of Urea-Formaldehyde Resins using Response Surface
Methodology
(1455-1472)
Journal of Adhesion
Science and Technology 24, #8 (2010)
Adhesives for On-Site Rehabilitation of Timber Structures
(1473-1499)
Journal of Adhesion
Science and Technology 24, #8 (2010)
Determination of the Microstructure of an Adhesive-Bonded Medium Density
Fiberboard (MDF) using 3-D Sub-micrometer Computer Tomography
(1501-1514)
Journal of Adhesion
Science and Technology 24, #8 (2010)
Moisture Sensitivity of Scots Pine Joints Produced by Linear Frictional Welding
(1515-1527)
Journal of Adhesion
Science and Technology 24, #8 (2010)
High Density Panels Obtained by Welding of Wood Veneers without any Adhesives
(1529-1534)
Journal of Adhesion
Science and Technology 24, #8 (2010)
Characterization of Urea-Formaldehyde Resins by GPC/SEC and HPLC Techniques:
Effect of Ageing
(1535-1551)
Journal of Adhesion
Science and Technology 24, #8 (2010)
Thermal Characterization of Kraft Lignin Phenol-Formaldehyde Resin for Paper
Impregnation
(1553-1565)
Journal of Adhesion
Science and Technology 24, #8 (2010)
Influence of Nanoclay on Phenol-Formaldehyde and Phenol-Urea-Formaldehyde Resins
for Wood Adhesives
(1567-1576)
Journal of Adhesion
Science and Technology 24, #8 (2010)
Reaction Mechanism of Hydroxymethylated Resorcinol Adhesion Promoter in
Polyurethane Adhesives for Wood Bonding
(1577-1582)
Journal of Adhesion
Science and Technology 24, #8 (2010)
Gluten Protein Adhesives for Wood Panels
(1583-1596)
Journal of Adhesion
Science and Technology 24, #8 (2010)
Wood Panel Adhesives from Low Molecular Mass Lignin and Tannin without Synthetic
Resins
(1597-1610)
Journal of Adhesion
Science and Technology 24, #8 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
41.
Journal of Agricultural and Food Chemistry 58 #10 (2010)
(Titles and Abstracts)
Promoting Fertilizer Use via Controlled Release of a Bacteria-Encapsulated Film Bag (6300–6305) Journal of Agricultural and Food Chemistry 58 #10 (2010)
**************************************************
Journal of Agricultural and Food Chemistry 58 #11 (2010)
(Titles and Abstracts)
Active Paraffin-Based Paper Packaging for Extending the Shelf Life of Cherry
Tomatoes
(6780–6786)
Journal of Agricultural and Food Chemistry 58 #11 (2010)
Pilot-Scale Resin Adsorption as a Means To Recover and Fractionate Apple
Polyphenols
(6787–6796)
Journal of Agricultural and Food Chemistry 58 #11 (2010)
Chemical Modification of Gelatin by a Natural Phenolic Cross-linker, Tannic Acid
(6809–6815)
Journal of Agricultural and Food Chemistry 58 #11 (2010)
**************************************************
Journal of Agricultural and Food Chemistry 58 #12 (2010)
(Titles and Abstracts)
Effects of Lignin−Metal Complexation on Enzymatic Hydrolysis of Cellulose
(7233–7238)
Journal of Agricultural and Food Chemistry 58 #12 (2010)
Properties of Wheat Gluten/Poly(lactic acid) Laminates
(7344–7350)
Journal of Agricultural and Food Chemistry 58 #12 (2010)
Proteomic Quantification of Disulfide-Linked Polymers in Raw and Heated Bovine
Milk
(7437–7444)
Journal of Agricultural and Food Chemistry 58 #12 (2010)
***************************************************
Journal of Agricultural and Food Chemistry 58 #13 (2010)
(Titles and Abstracts)
Influence of Sous Vide and Water Immersion Processing on Polyacetylene Content
and Instrumental Color of Parsnip (Pastinaca sativa) Disks
(7740–7747)
Journal of Agricultural and Food Chemistry 58 #13 (2010)
Production and Properties of Nanocellulose-Reinforced Methylcellulose-Based
Biodegradable Films
(7878–7885)
Journal of Agricultural and Food Chemistry 58 #13 (2010)
Characterization and Singlet Oxygen Quenching Capacity of Spray-Dried
Microcapsules of Edible Biopolymers Containing Antioxidant Molecules
(8004–8011)
Journal of Agricultural and Food Chemistry 58 #13 (2010)
Characterization of Fibrous Residues from Agrowastes and the Production of
Nanofibers
(8077–8084)
Journal of Agricultural and Food Chemistry 58 #13 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
42.
Journal of the American Chemical Society 132 #19 (2010)
(Titles and Abstracts)
Recognition, Neutralization, and Clearance of Target Peptides in the Bloodstream
of Living Mice by Molecularly Imprinted Polymer Nanoparticles: A Plastic
Antibody
(6644–6645)
Journal of the American Chemical Society 132 #19 (2010)
Nonclassical Active Site for Enhanced Gas Sorption in Porous Coordination
Polymer
(6654–6656)
Journal of the American Chemical Society 132 #19 (2010)
Light-Harvesting Conjugated Microporous Polymers: Rapid and Highly Efficient
Flow of Light Energy with a Porous Polyphenylene Framework as Antenna
(6742–6748)
Journal of the American Chemical Society 132 #19 (2010)
***************************************************
Journal of the American Chemical Society 132 #20 (2010)
(Titles and Abstracts)
No articles selected
***************************************************
Journal of the American Chemical Society 132 #21 (2010)
(Titles and Abstracts)
Enantioselective Gel Collapsing: A New Means of Visual Chiral Sensing
(7297–7299)
Journal of the American Chemical Society 132 #21 (2010)
***************************************************
Journal of the American Chemical Society 132 #22 (2010)
(Titles and Abstracts)
Synthetic Control of Structural Order in
N-Alkylthieno[3,4-c]pyrrole-4,6-dione-Based Polymers for Efficient Solar Cells
(7595–7597)
Journal of the American Chemical Society 132 #22 (2010)
Conjugated Polymers That Respond to Oxidation with Increased Emission
(7758–7768)
Journal of the American Chemical Society 132 #22 (2010)
Random Catalyst Walking along Polymerized Poly(3-hexylthiophene) Chains in
Kumada Catalyst-Transfer Polycondensation
(7803–7810)
Journal of the American Chemical Society 132 #22 (2010)
*****************************************************
Journal of the American Chemical Society 132 #23 (2010)
(Titles and Abstracts)
High-Molecular-Weight Polyquinoxaline-Based Helically Chiral Phosphine (PQXphos)
as Chirality-Switchable, Reusable, and Highly Enantioselective Monodentate
Ligand in Catalytic Asymmetric Hydrosilylation of Styrenes
(7899–7901)
Journal of the American Chemical Society 132 #23 (2010)
Cubic Octanuclear Ni(II) Clusters in Highly Porous Polypyrazolyl-Based Materials
(7902–7904)
Journal of the American Chemical Society 132 #23 (2010)
Biophysical Mimicry of Lung Surfactant Protein B by Random Nylon-3 Copolymers
(7957–7967)
Journal of the American Chemical Society 132 #23 (2010)
Hierarchical Supramolecular Ordering with Biaxial Orientation of a Combined
Main-Chain/Side-Chain Liquid-Crystalline Polymer Obtained from Radical
Polymerization of 2-Vinylterephthalate
(8071–8080)
Journal of the American Chemical Society 132 #23 (2010)
Solid-State NMR Reveals the Hydrophobic-Core Location of Poly(amidoamine)
Dendrimers in Biomembranes
(8087–8097)
Journal of the American Chemical Society 132 #23 (2010)
Nanoscale Morphology in Precisely Sequenced Poly(ethylene-co-acrylic acid) Zinc
Ionomers
(8165–8174)
Journal of the American Chemical Society 132 #23 (2010)
**************************************************
Journal of the American Chemical Society 132 #24 (2010)
(Titles and Abstracts)
Nanoporous Linear Polyethylene from a Block Polymer Precursor
(8230–8231)
Journal of the American Chemical Society 132 #24 (2010)
Nanotube Formation through the Continuous One-Dimensional Fusion of Hollow
Nanocapsules Composed of Layer-by-Layer Poly(lactic acid) Stereocomplex Films
(8236–8237)
Journal of the American Chemical Society 132 #24 (2010)
Surface-Functionalizable Polymer Nanogels with Facile Hydrophobic Guest
Encapsulation Capabilities
(8246–8247)
Journal of the American Chemical Society 132 #24 (2010)
Step-by-Step Assembly of Self-Patterning Polyelectrolyte Films Violating
(Almost) All Rules of Layer-by-Layer Deposition
(8264–8265)
Journal of the American Chemical Society 132 #24 (2010)
Layer-by-Layer Assembly of Polyelectrolytes into Ionic Current Rectifying
Solid-State Nanopores: Insights from Theory and Experiment
(8338–8348)
Journal of the American Chemical Society 132 #24 (2010)
**************************************************
Journal of the American Chemical Society 132 #25 (2010)
(Titles and Abstracts)
pH-Responsive Molecular Tweezers
(8544–8545)
Journal of the American Chemical Society 132 #25 (2010)
Controlling Phase Separation and Optical Properties in Conjugated Polymers
through Selenophene−Thiophene Copolymerization
(8546–8547)
Journal of the American Chemical Society 132 #25 (2010)
NMR Methods for Characterizing the Pore Structures and Hydrogen Storage
Properties of Microporous Carbons
(8618–8626)
Journal of the American Chemical Society 132 #25 (2010)
Probing Electronic Superexchange Coupling at Isolated Poly-p-phenylene Molecules
(8774–8778)
Journal of the American Chemical Society 132 #25 (2010)
MALDI Mass Spectrometry for Synthetic Polymer Analysis
(8805–8806)
Journal of the American Chemical Society 132 #25 (2010)
*************************************************
Journal of the American Chemical Society 132 #26 (2010)
(Titles and Abstracts)
Synthesis and Solution Self-Assembly of Side-Chain Cobaltocenium-Containing
Block Copolymers
(8874–8875)
Journal of the American Chemical Society 132 #26 (2010)
CMPs as Scaffolds for Constructing Porous Catalytic Frameworks: A Built-in
Heterogeneous Catalyst with High Activity and Selectivity Based on Nanoporous
Metalloporphyrin Polymers
(9138–9143)
Journal of the American Chemical Society 132 #26 (2010)
*************************************************
Journal of the American Chemical Society 132 #27 (2010)
(Titles and Abstracts)
Voltage-Responsive Vesicles Based on Orthogonal Assembly of Two Homopolymers
(9268–9270)
Journal of the American Chemical Society 132 #27 (2010)
**************************************************
Journal of the American Chemical Society 132 #28 (2010)
(Titles and Abstracts)
Reducing the Symmetry of Bimetallic Au@Ag Nanoparticles by Exploiting Eccentric
Polymer Shells
(9537–9539)
Journal of the American Chemical Society 132 #28 (2010)
UV and Near-IR Triggered Release from Polymeric Nanoparticles
(9540–9542)
Journal of the American Chemical Society 132 #28 (2010)
Bimodal Polarons and Hole Transport in Poly(3-hexylthiophene):Fullerene Blend
Films
(9631–9637)
Journal of the American Chemical Society 132 #28 (2010)
Direct Synthesis of Polymer Nanocapsules: Self-Assembly of Polymer Hollow
Spheres through Irreversible Covalent Bond Formation
(9908–9919)
Journal of the American Chemical Society 132 #28 (2010)
Fullerene Polymers: Synthesis, Properties and Applications
(9929–9930)
Journal of the American Chemical Society 132 #28 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
43.
Journal
of Analytical and Applied Pyrolysis 88 #2 (2010)
(Title and Abstracts)
The structural and thermal characteristics of
wheat straw hemicellulose
(134-139)
Journal
of Analytical and Applied Pyrolysis 88 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
44.
Journal
of Analytical Atomic Spectroscopy
25 #6 (2010)
(Titles
and Abstracts)
Low density polyethylene window for the determination of mercury by cold vapor
atomic absorption spectrometry
(886 - 888)
Journal
of Analytical Atomic Spectroscopy
25 #6 (2010)
*************************************************
Journal
of Analytical Atomic Spectroscopy
25 #7 (2010)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
45.
Journal of Applied Polymer Science 117 #3 (2010)
(Titles and Abstracts) (H)
Pongamia glabra seed oil based
poly(urethane-fatty amide)
(p 1245-1251)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Preparation and characterizations of tantalum
pentoxide (Ta2O5)
nanoparticles and UV-curable Ta2O5-acrylic
nanocomposites
(p 1252-1259)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
In situ SEM study of fatigue crack growth
mechanism in carbon black-filled natural rubber
(p 1260-1269)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Friendly to environment heterocyclic adducts as
corrosion inhibitors for steel in water-borne paints
(p 1270-1278)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Controlled degradation of natural rubber and
modification of the obtained telechelic oligoisoprenes: Preliminary study of
their potentiality as polyurethane foam precursors
(p 1279-1289)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
The viscoelastic behavior of rubber under a
complex loading. II. The effect large strains and the incorporation of carbon
black
(p 1290-1297)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Dynamic mechanical properties of oil palm
microfibril-reinforced natural rubber composites
(p 1298-1308)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Poly(vinyl chloride)-Acacia bark flour composite:
Effect of particle size and filler content on mechanical, thermal, and
morphological characteristics
(p 1309-1318)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
An investigation on the progressive change in
filament characteristics from outer to inner layers of mulberry and tasar
cocoons
(p 1319-1324)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Hydroentanglement nonwoven filters for air
filtration and its performance evaluation
(p 1325-1331)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Cryostructuring of polymer systems. XXX.
Poly(vinyl alcohol)-based composite cryogels filled with small disperse oil
droplets: A gel system capable of mechanically induced releasing of the
lipophilic constituents
(p 1332-1349)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
A new approach to soluble polyaniline and its
copolymers with toluidines
(p 1350-1360)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Polymeric blend microspheres for controlled
release of theophylline
(p 1361-1370)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Polymerization of N-vinylcarbazole (NVC)
by tungsten blues (WB) and evaluation of a conducting PNVC-WB nanocomposite
isolated from the system
(p 1371-1377)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Blends of thermoplastic polyurethane and
polypropylene. II. Thermal and morphological behavior
(p 1378-1384)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Studies of different kinds of fiber pretreating
on the properties of PLA/sweet sorghum fiber composites
(p 1385-1393)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Synthesis and properties of hydrophilic segmented
block copolymers based on poly(ethylene oxide)-ran-poly(propylene oxide)
(p 1394-1404)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Synthesis of poly(D,L-lactic
acid) modified by cholic acid via direct melt copolycondensation and its
characterization
(p 1405-1415)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Optical parameters and absorption studies of
UV-irradiated azo dye-doped PMMA films
(p 1416-1423)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Mathematical model of gentamicin sulfate release
from a bioactive textile material as a transdermal system under in vitro
conditions
(p 1424-1430)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Cationic polymerization of 2,3-dihydro-4H-pyran
using 12-tungstophosphoric acid as a solid acid catalyst
(p 1431-1435)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Synthesis and characterization of sulfonated
poly(ether sulfone ether ketone ketone) for proton exchange membranes
(p 1436-1445)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Hybrid fiber fabric composites from poly ether
ether ketone and glass fiber
(p 1446-1459)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Solvent effects in the polyethylene terephthalate
surface modification by cold argon plasma-induced grafting polymerization of
methacrylic acid
(p 1460-1468)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Synthesis and curing behavior of a novel
benzoxazine-based bisphthalonitrile monomer
(p 1469-1475)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Adsorption and recovery of nonionic polymers by
neutralization of cellulose fiber surface charge via cationic
polyamide-epichlorohydrin resins
(p 1476-1485)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Nematic-isotropic transition in polymer-confined
and polymer-free liquid crystal mixtures
(p 1486-1492)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Purification, surface modification of coal ash
silica and its potential application in rubber composites
(p 1493-1501)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Effect of different types of carbon black on the
mechanical and acoustic properties of ethylene-propylene-diene rubber
(p 1502-1508)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
The compatibility of acyclovir with
polyacrylonitrile in the electrospun drug-loaded nanofibers
(p 1509-1515)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Characterization of poly(lactic acid)
multifilament yarns. I. The structure and thermal behavior
(p 1516-1525)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Poly(imide-amide)s and poly(imide-ester)s
obtained from N,N
-(4,4-Me,R-diphthaloyl)-bis-glycine
acid dichloride (R = Me, Et): Synthesis, characterization, and thermal
studies
(p 1526-1534)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Effect of nano zinc oxide on the cure
characteristics and mechanical properties of the silica-filled natural
rubber/butadiene rubber compounds
(p 1535-1543)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
A comparative study of water dispersible
polyaniline nanocomposites prepared by laccase-catalyzed and chemical methods
(p 1544-1550)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Viscosity study of salt tolerant polymers
(p 1551-1557)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Sustained release properties of crosslinked and
substituted starches
(p 1558-1565)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Fabrication of sintered porous poly(L-lactide)
scaffold with controlled pore size and porosity
(p 1566-1571)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Thermal stability and crystalline of electrospun
polyamide 6/organo-montmorillonite nanofibers
(p 1572-1577)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Dynamically vulcanized blends of polypropylene
and ethylene octene copolymer: Influence of various coagents on thermal and
rheological characteristics
(p 1578-1590)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Study on phase change characteristics of PEG/PAM
coupling blend
(p 1591-1595)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
The degradation and prestabilization of
acrylonitrile copolymers
(p 1596-1600)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Synthesis of nano-sized ZnO and polyaniline-zinc
oxide composite: Characterization, stability in terms of DC electrical
conductivity retention and application in ammonia vapor detection
(p 1601-1607)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Properties of epoxy novolak resin layers doped
with bismuth for photoluminescence near 1300 nm
(p 1608-1612)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Electrochemistry and electrocatalysis with
hemoglobin in hollow polyelectrolyte fibrous mats
(p 1613-1617)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Preparation of acetylated chitosan sponges
(chitin sponges)
(p 1618-1623)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Surface functionalization of polypropylene
nonwovens by metallic deposition
(p 1624-1630)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Water in dextran hydrogels
(p 1631-1637)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
One-step synthesis of triarm block copolymers via
simultaneous reversible-addition fragmentation chain transfer and ring-opening
polymerization
(p 1638-1645)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
The role of polymerizable organophilic clay
during preparing polyethylene nanocomposite via filling polymerization
(p 1646-1657)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Development of unsaturated polyester matrix -
carbon nanofibers nanocomposites with improved electrical properties
(p 1658-1666)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Synthesis and characterization of nanocomposites
based on a furan resin
(p 1667-1673)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Water vapor sorption kinetics of wood modified
with glutaraldehyde
(p 1674-1682)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Effect of the viscosity ratio on the morphology
and properties of PET/HDPE blends with and without compatibilization
(p 1683-1694)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Reinforcement of polyurethane-based shape memory
polymer by hindered phenol compounds and silica particles
(p 1695-1702)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Novel hydrogels of PVP-CMC and their swelling
effect on viscoelastic properties
(p 1703-1710)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Performance of graphite filled composite based on
benzoxazine resin
(p 1711-1717)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Oxazoline functionalized polystyrene as a
compatibilizer for dispersion of organoclay in polyphenylene ether blends
(p 1718-1730)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Mechanical, thermal, and morphological properties
of maleic anhydride-g-polypropylene compatibilized and chemically
modified banana-fiber-reinforced polypropylene composites
(p 1731-1740)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Combined effect of VA content and pH level of
filler on properties of EPDM/SmBO3 and EPDM/ATO composites reinforced by three types of EVA
(p 1741-1749)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Water absorption of two different denture base
resins reinforced with dental fiber systems
(p 1750-1753)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Polyamide 6 nanofibrous nonwovens via
electrospinning
(p 1754-1765)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Thermodynamic study of the sulphonation of
polystyrene-butadiene rubber with chlorosulphonic acid for proton exchange
membrane fuel cell
(p 1766-1771)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Silver-loaded lyocell fibers modified by
tempo-mediated oxidation
(p 1772-1779)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Effect of halocarbon promoters on polyethylene
properties using MgCl2
(ethoxide type)/TiCl4/AlEt3/H2
catalyst system
(p 1780-1786)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Investigation of sorption/swelling
characteristics of chemically crosslinked AAm/SMA hydrogels as biopotential
sorbent
(p 1787-1797)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Nanocapsules embedded in natural rubber latex
gloves
(p 1798-1803)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
POM/PU/carbon nanofiber composites produced by
water-mediated melt compounding: Structure, thermomechanical and dielectrical
properties
(p 1804-1812)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Hydrogel-MWCNT nanocomposites: Synthesis,
characterization, and heating with radiofrequency fields
(p 1813-1819)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Thermosensitive polyurethane film and finished
leather with controllable water vapor permeability
(p 1820-1827)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Caseinate based biodegradable films with improved
water resistance
(p 1828-1836)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Co(III) complex mediated microwave-assisted
synthesis of PAN
(p 1837-1842)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Structure and properties of Cu(II) complex bamboo
pulp fabrics
(p 1843-1850)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Preparation and antidehydration of
interpenetrating polymer network hydrogels based on 2-hydroxyethyl methacrylate
and N-vinyl-2-pyrrolidone
(p 1851-1858)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
Investigation on properties of new fluorine- and
silicon-modified UV-cured epoxy methacrylate resin
(p 1859-1866)
Journal of Applied Polymer Science 117 #3 (2010)
Abstract
***********************************************
Journal of Applied Polymer Science 117 #4 (2010)
(Titles and Abstracts) (H)
Sorption mechanism in organic solutions of
uncharged polymers
(p 1867-1875)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
The flocculating properties of chitosan-graft-polyacrylamide
flocculants (I) - effect of the grafting ratio
(p 1876-1882)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Intrinsic viscosity-number average molecular
weight relationship for poly(1,4-butylene adipate) diol
(p 1883-1887)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Role of carboxyl pendant groups of medium chain
length poly(3-hydroxyalkanoate)s in biomedical temporary applications
(p 1888-1896)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
A novel method of modifying poly(ethylene
terephthalate) fabric using supercritical carbon dioxide
(p 1897-1907)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Removal of phenol from aqueous solutions by
adsorption onto polymeric adsorbents
(p 1908-1913)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Preparation and characterization of PVC/PS
composite cation exchange fibers and their adsorption properties on aniline
(p 1914-1923)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Display forming polymer/liquid crystal composite
layers and their stability against external mechanical distortions
(p 1924-1933)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Thermo-electric-visco-elastic material
(p 1934-1944)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Pectin grafted poly(N-vinylpyrrolidone):
Optimization and in vitro controllable theophylline drug release
(p 1945-1954)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Poly(lactic acid)/soluble eggshell membrane
protein blend films: Preparation and characterization
(p 1955-1959)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
A novel method for controlling the sublayer
microstructure of an ultrafiltration membrane: The preparation of the PSF-Fe3O4
ultrafiltration membrane in a parallel magnetic field
(p 1960-1968)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Spinning and characterizations of
polypropylene/alkylphosphonic acid treated montmorillonite nanocomposite fiber
(p 1969-1977)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Preparation and properties of
polythiourethane/ZnS nanocomposites with high refractive index
(p 1978-1983)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Synthesis and electrospun fiber mats of low Tg
poly(propylene fumerate-co-propylene maleate)
(p 1984-1991)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Nanoclay reinforced rigid polyurethane foams
(p 1992-1997)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Electrical properties and morphology of carbon
black-filled HDPE/EVA composites
(p 1998-2002)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Chain extension of poly(ethylene terephthalate)
with bisphenol-A dicyanate
(p 2003-2008)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Synthesis and gas permeability of membranes of
silyl-substituted poly(p-phenylenevinylene)s
(p 2009-2015)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
The flocculating properties of chitosan-graft-polyacrylamide
flocculants (II) - Test in pilot scale
(p 2016-2024)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Synthesis of water soluble sulfonated polyaniline
and determination of crystal structure
(p 2025-2035)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
In situ ESR response to temperature
evolution of styrene/dibenzoyl peroxide/Di-TEMPO biradical system
(p 2036-2041)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Fabrication of electrospun eggshell membrane
nanofibers by treatment with catechin
(p 2042-2049)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Structural, morphological, thermal, and
conductivity studies of magnesium ion conducting P(VdF-HFP)-based solid polymer
electrolytes with good prospects
(p 2050-2058)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Synthesis, characterizations, and mechanical
properties of structurally modified poly(vinyl alcohol)
(p 2059-2068)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Dynamic processes of the photoinduced
birefringence of two novel azobenzene-functionalized polymers
(p 2069-2074)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Preparation and characterization of polyethylene
oxide (PEO)/gelatin blend for biomedical application: Effect of gamma radiation
(p 2075-2082)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Degradation of poly(ethylene glycol) by
electrolysis during the Cu electroplating: A combined experimental and density
functional theory study
(p 2083-2089)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Effect of organoclays on the properties of
polyurethane/clay nanocomposite coatings
(p 2090-2100)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Mechanical and thermal properties enhancement of
polycarbonate nanocomposites prepared by melt compounding
(p 2101-2112)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Electrospun ultrafine composite fibers from
organic-soluble chitosan and poly(ethylene oxide)
(p 2113-2120)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Changes in the chemical structure and properties
of a perfluorosulfonated acid membrane induced by fuel-cell operation
(p 2121-2132)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Optimal designs for constant-heating-rate
differential scanning calorimetry experiments for polymerization kinetics: nth-order
kinetics
(p 2133-2139)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Thermal resistance of cycloaliphatic epoxy
hybrimer based on sol-gel derived oligosiloxane for LED encapsulation
(p 2140-2145)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Synthesis, spectral, thermal, and chelation
potentials of polymeric hydrazone based on 2,4-dihydroxy benzophenone
(p 2146-2152)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Spontaneous transesterification reactions between
poly(lactide-co-glycolide) and poly(trimethylene carbonate) at the
interface
(p 2153-2158)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Thermal, morphological, and mechanical
characterization of novel carbon nanofiber-filled bismaleimide composites
(p 2159-2167)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Swelling kinetic study and characterization of
crosslinked hydrogels containing silver nanoparticles
(p 2168-2174)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Membranes based on polyimide-polyaniline
nanocomposites for pervaporation of organic mixtures
(p 2175-2182)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Effects of molecular weight and degree of
acetylation on the release of nitric oxide from chitosan-nitric oxide adducts
(p 2183-2188)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Optimized surface silylation of chemically
amplified epoxidized photoresists for micromachining applications
(p 2189-2195)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Selective laser sintering of polyamide
12/potassium titanium whisker composites
(p 2196-2204)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Novel Zr(IV)/sugar beet pulp composite for
removal of sulfate and nitrate anions
(p 2205-2212)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Influence of chemical structure of hardener on
mechanical and adhesive properties of epoxy polymers (p 2213-2219)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Thermal and mechanical properties of acrylated
expoxidized-soybean oil-based thermosets
(p 2220-2225)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Effect of the shape of dispersed particles on the
thermal and mechanical properties of biomass polymer blends composed of poly(L-lactide)
and poly(butylene succinate)
(p 2226-2232)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Hydroxyethyl chitosan-g-poly(acrylic acid-co-sodium
acrylate) superabsorbent polymers
(p 2233-2240)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Effects of a pretreatment with N-methylmorpholine-N-oxide
on the structures and properties of ramie
(p 2241-2250)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
A design of experiments (DoE) approach to
material properties optimization of electrospun nanofibers
(p 2251-2257)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Amino derivatives of PEEK-WC
(p 2258-2264)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
The thermoresponsive shape memory characteristics
of polyurethane foam
(p 2265-2271)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Improvement of thermal and mechanical properties
of a phenolic resin nanocomposite by in situ formation of silsesquioxanes
from a molecular precursor
(p 2272-2277)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Dyeing behaviors of ionic liquid treated wool
(p 2278-2283)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Sorption of methane, nitrogen, carbon dioxide,
and water in Matrimid 5218
(p 2284-2289)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Working mechanism of poly(vinyl alcohol) cement
fluid loss additive
(p 2290-2298)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Polymer processing and characterization of LLDPE
films loaded with 
-tocopherol,
quercetin, and their cyclodextrin inclusion complexes
(p 2299-2309)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Polymer-insulating material for rated electrical
applications
(p 2310-2315)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
A molecularly imprinted polymer via a
salicylaldiminato-based cobalt(III) complex: A highly selective solid-phase
extractant for anionic reactive dyes
(p 2316-2323)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Waste pine cones as a source of reinforcing
fillers for thermoplastic composites
(p 2324-2330)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Specific rebinding property of protein
macromolecularly imprinted polymer microspheres based on calcium alginate
hydrogel via gas jetting-dropping method
(p 2331-2339)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Studies on conductivity of acrylonitrile-butadiene
rubber/LiClO4 composite and its
modification by adding epoxy resin
(p 2340-2345)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Electroresponsive behavior of a sulfonated
poly(vinyl alcohol) hydrogel and its application to electrodriven artificial
fish
(p 2346-2353)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Chitosan/alginate nanoparticles stabilized by
poloxamer for the controlled release of 5-fluorouracil
(p 2354-2359)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Effects of diazonaphthoquinone groups on
photosensitive coating
(p 2360-2365)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Structure, mechanical properties, and gas
permeability of elastomers based on polybutadiene and epoxy resin
(p 2366-2372)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Molecularly imprinted fluorescent polymers as
chemosensors for the detection of mercury ions in aqueous media
(p 2373-2379)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Influence of the radiation grafting conditions on
the cross-sectional distribution of poly(vinylbenzyl chloride) grafted polymer
onto poly(tetrafluoroethylene-co-hexafluoropropylene) films
(p 2380-2385)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Simultaneous estimation of the phase content and
lamellar thickness in isotactic polypropylene by the simulated annealing of
wide-angle X-ray scattering data
(p 2386-2394)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Glass-transition and gas-transport
characteristics of polymer nanocomposites based on crosslinked poly(ethylene
oxide)
(p 2395-2405)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Studies on the effect of epoxide equivalent
weight of epoxy resins on thermal, mechanical, and chemical characteristics of
vinyl ester resins
(p 2406-2412)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
High density polyethylene/micro calcium carbonate
composites: A study of the morphological, thermal, and viscoelastic properties
(p 2413-2421)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Synthesis and characterization of low-dielectric
photosensitive polyimide/silica hybrid materials
(p 2422-2427)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Influence of talc content on some properties of
gamma irradiated composites of polyethylene and recycled rubber wastes
(p 2428-2435)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Rheological properties of methylcellulose aqueous
gels under dynamic compression: Frequency sweep and validity of scaling law
(p 2436-2443)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Degradation kinetics of poly(HDDA-co-MMA)
(p 2444-2453)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Isothermal crystallization and melting behavior
of 2-methyl-1,3-propanediol substituted sulfonated poly(ethylene terephthalate)
copolyesters
(p 2454-2463)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Pervaporation separation of isopropanol/benzene
mixtures using inorganic-organic hybrid membranes
(p 2464-2471)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Liquefied petroleum gas desulfurization by HTBN/PAN
composite membrane
(p 2472-2479)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
Friction and wear properties of solid lubricants
filled/carbon fabric reinforced phenolic composites
(p 2480-2485)
Journal of Applied Polymer Science 117 #4 (2010)
Abstract
***********************************************
Journal of Applied Polymer Science 117 #5 (2010)
(Titles and Abstracts) (H)
Influence of corona discharge and chitosan
surface treatment on dyeing properties of wool
(p 2487-2496)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Preparation and properties of organic-inorganic
hybrid composites based on polystyrene and an incompletely condensed
polyvinylsilsesquioxane oligomer
(p 2497-2505)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Investigation of the effect of delayed reflux on
PVC grain properties produced by suspension polymerization
(p 2506-2514)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Impact fracture behavior and damage mechanisms of
PP/EVOH blends compatibilized with ionomer Zn2+
(p 2515-2522)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Rheological, mechanical and morphological
properties of thermoplastic vulcanizates based on high impact polystyrene and
styrene-butadiene rubber
(p 2523-2529)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Effect of structure and additives on thermal
stability of silicone fluids
(p 2530-2537)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Synthesis and characterizations of branched
poly(butylene succinate) copolymers with 1,2-octanediol segments
(p 2538-2544)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Synthesis and characterization of new aromatic
polyesters containing pendent naphthyl units
(p 2545-2552)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
The Van der Pauw method for sheet resistance
measurements of polypyrrole-coated para-aramide woven fabrics
(p 2553-2558)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Highly processible maleimide and nitrile
functionalized benzoxazines for advanced composites applications
(p 2559-2565)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Synthesis and characterization of polystyrene
oligomers with several pendent epoxy groups
(p 2566-2574)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Evaluation of the chemical resistance of
high-density polyethylene geomembranes
(p 2575-2582)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Surfactant assisted processing of carbon
nanotube/polypropylene composites: Impact of surfactants on the matrix polymer
(p 2583-2590)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Micromechanical behavior related to the
nanostructure of biodegradable polyesters
(p 2591-2596)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Aqueous chloramine diffusion into elastomers
(p 2597-2611)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Preparation and mechanical properties of
crosslinked 1,2,3-triazole-polymers as potential propellant binders
(p 2612-2621)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Effect of carbon black addition and its phase
selective distribution on the stress relaxation behavior of filled thermoplastic
vulcanizates
(p 2622-2634)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Properties of green SrAl2O4
phosphor in LDPE and PMMA polymers
(p 2635-2640)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Nonlinear optical studies on new conjugated
poly{2,2l-(3,4-
dialkoxythiophene-2,5-diyl) bis[5-(2-thienyl)-1,3,4-oxadiazole]}s
(p 2641-2650)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Thermally induced phase separation in liquid
crystalline polymer/polycarbonate blends
(p 2651-2668)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Novel N-ethyl-2-styrylquinolinum iodides
as sensitizers in photoinitiated free radical polymerization of
trimethylolopropane triacrylate (TMPTA), part 3
(p 2669-2675)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Synthesis and photopolymerization of phosphonic
acid monomers for applications in compomer materials
(p 2676-2687)
Abstract
Electrochemical polymerization of p-terphenyl
in mixed electrolyte of boron trifluoride diethyl etherate and CH2Cl2
(p 2688-2694)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Phase-separation process in a poly(methyl
methacrylate)-modified epoxy system: A novel approach to understanding the
effect of the curing temperature on the final morphology
(p 2695-2706)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Reactive grafting of glycidyl methacrylate onto
polypropylene
(p 2707-2714)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Highlight of a compensation effect between filler
morphology and loading on dynamic properties of filled rubbers
(p 2715-2723)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Compatibilizing effect of starch-grafted-poly(L-lactide)
on the poly(
-caprolactone)/starch
composites
(p 2724-2731)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Macroporous poly(vinyl alcohol) foam crosslinked
with epichlorohydrin for microorganism immobilization
(p 2732-2739)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Optimization of cotton crosslinking with
polycarboxylic acids and nano TiO2 using central composite design
(p 2740-2748)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Preparation of polymer microspheres in
supercritical carbon dioxide and their evaluation as cold-flow improvers in
diesel
(p 2749-2753)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Preparation of aclarubicin PLGA nanospheres and
related in vitro/in vivo studies
(p 2754-2761)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Influence of aliphatic amine epoxy hardener on
the adhesive properties of blends of mono-carboxyl-terminated poly(2-ethylhexyl
acrylate-co-methyl methacrylate) with epoxy resin
(p 2762-2770)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Semibatch emulsion copolymerization of butyl
acrylate and glycidyl methacrylate: Effect of operating variables
(p 2771-2780)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
A library of thiol-terminated methacrylate
telomers prepared by photoinitiated iniferter mediated polymerization for use in
modifications of chromatographic surfaces by the 
grafting
to
approach
(p 2781-2789)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Preparation of poly(lactic acid)/poly(methyl
methacrylate)/silicon dioxide degradable hybrid electrolytes
(p 2790-2794)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Thermal and swelling studies of hydrophobically
modified polyacrylamide hydrogels
(p 2795-2802)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Analyzing the real advantages of bifunctional
initiator over monofunctional initiator in free radical polymerization
(p 2803-2816)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Effect of the preparation conditions on the
permeation of ultrahigh-molecular-weight polyethylene/silicon dioxide hybrid
membranes
(p 2817-2824)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Surface modification of vulcanized rubber by
radiation grafting, part 1: Improvement in friction behavior
(p 2825-2830)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Distribution of morphology and transport
properties of water vapor in injection-molded biodegradable aliphatic polyester
(p 2831-2838)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Preparation and characterization of crosslinked
poly(methylmethacrylate-acrylic acid sodium salt)-modified bone cement
(p 2839-2846)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Influence of geometrical parameters of screw melt
mixing on visco-elastic properties of PC/ABS blends
(p 2847-2853)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Preparation of an aminated bagasse fiber and its
mercury adsorption behavior
(p 2854-2861)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Color improvment of C9
hydrocarbon resin by hydrogenation over 2% Pd/
-alumina
catalyst: Effect of degree of aromatic rings hydrogenation
(p 2862-2869)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Prepared hydrogenated nitrile rubber
(HNBR)/organo-montmorillonite nanocomposites by the melt intercalation method
(p 2870-2876)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Effect of nanofillers as reinforcement agents for
lignin composite fibers
(p 2877-2881)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
An effective antimicrobial treatment for wool
using polyhexamethylene biguanide as the biocide, part 2: Further
characterizations of the fabrics
(p 2882-2887)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Impact of curing condition on pH and
alkalinity/acidity of structural wood adhesives
(p 2888-2898)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
A novel route for preparation of PVC sheets with
high UV irradiation resistance
(p 2899-2906)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Tensile and lignocellulosic properties of
Prosopis chilensis natural fabric
(p 2907-2914)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Study on chain deformation of polyacrylamides in
solutions and its flocculation performance during the flocculation process
(p 2915-2922)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Degradation of the covalent carbon-carbon bond
between fullerene-C60 and
poly(1,3-cyclohexadiene)
(p 2923-2931)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Thermal properties of new bismaleimide resins
containing hydrogen silsesquioxane and diallyl bisphenol A
(p 2932-2936)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
A photoinitiator-free photosensitive polyimide
with low dielectric constant
(p 2937-2945)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Controlled preparation of physically crosslinked
chitosan-g-poly(vinyl alcohol) hydrogel
(p 2946-2950)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Terpolymerization and performance of
2-acrylamide-2-methyl propane sulfonic acid / itaconic acid / N-vinyl-2-pyrrolidone
(p 2951-2957)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
The role of temperature on the Egyptian drilling
mud performance in the presence of cationic polyethylene imine and anionic
polyacrylamide
(p 2958-2963)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Morphology and properties of the PA66/PC/silicone
rubber composites
(p 2964-2971)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Use of nanoparticles for improving the foaming
behaviors of linear PP
(p 2972-2979)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Kinetics and crystal structure of isothermal
crystallization of poly(lactic acid) plasticized with triphenyl phosphate
(p 2980-2992)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Analysing metals in bottle-grade poly(ethylene
terephthalate) by X-ray fluorescence spectrometry
(p 2993-3000)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Optimizing preparation of NaCS-chitosan complex
to form a potential material for the colon-specific drug delivery system
(p 3001-3012)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Fractionated crystallization and self-nucleation
behavior of poly(ethylene oxide) in its miscible blends with
poly(3-hydroxybutyrate)
(p 3013-3022)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Thermal effects on the percolation behavior of
polyvinylidene fluoride/nickel composites
(p 3023-3028)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Preparation of photo-reactive azidophenyl
chitosan derivative for immobilization of growth factors
(p 3029-3037)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Small angle neutron scattering study of
structural aspects of nonionic surfactants (Tween 20 and Tween 80) in the
presence of polyethylene glycols and triblock polymers
(p 3038-3046)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
In-line characterization of polypropylene
nanocomposites using FT-NIR
(p 3047-3053)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Modification of halloysite nanotubes with
poly(styrene-butyl acrylate-acrylic acid) via in situ soap-free graft
polymerization
(p 3054-3059)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Effect of additive concentration and gamma
radiation on the molecular and color properties of poly(vinyl chloride)
(p 3060-3065)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
A novel organophosphorus flame retardant:
Synthesis and durable finishing of poly(ethylene terephthalate)/cotton blends
(p 3066-3074)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
An effective antimicrobial treatment for wool
using polyhexamethylene biguanide as the biocide, Part 1: Biocide uptake and
antimicrobial activity
(p 3075-3082)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Compatibilization method applied to the chitosan-acid
poly(L-lactide) solution
(p 3083-3091)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Preparation and flame retardancy of 2-EHA/n-BA
acrylic PSA containing single and combined flame retardants
(p 3092-3097)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
Application of hydrophilic finished of synthetic
fabrics coated with CMC/acrylic acid cured by electron beam irradiation in the
removal of metal cations from aqueous solutions
(p 3098-3106)
Journal of Applied Polymer Science 117 #5 (2010)
Abstract
************************************************
Journal of Applied Polymer Science 117 #6 (2010)
(Titles and Abstracts) (H)
Electrochemical preparation and properties of
polypyrrole and its blend with poly(vinyl sulfonate) doped with perchlorate
anions
(p 3107-3113) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Radical annihilation of -ray-irradiated
contact lens blanks made of a 2-hydroxyethyl methacrylate copolymer at elevated
temperatures
(p 3114-3120) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Synthesis and characterization of a cured epoxy
resin with a benzoxazine monomer containing allyl groups
(p 3121-3127) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Crosslinking behavior of dextran modified with
hydroxyethyl methacrylate upon irradiation with visible light - Effect of
concentration, coinitiator type, and solvent
(p 3128-3138) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Influence of the phase morphology on the
molecular orientation at the crack tips in rubber-modified nylon 6: A micro
Fourier transform infrared study
(p 3139-3145) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Pectin-based polymer hydrogel as a carrier for
release of agricultural nutrients and removal of heavy metals from wastewater
(p 3146-3154) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Catalysis investigation of PET depolymerization
under metal oxides by microwave irradiation
(p 3155-3159) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Applying soft computing methods to fluorescence
modeling of the polydimethylsiloxane/silica composites containing lanthanum
(p 3160-3169) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Effects of thermal imidization on mechanical
properties of poly(amide-co-imide)/multiwalled carbon nanotube composite
films
(p 3170-3180) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Influence of acrylamide copolymerization of
urea-formaldehyde resin adhesives to their chemical structure and performance
(p 3181-3186) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Development and characterization of
polypyrrole-polylactide conductive open-porous composites
(p 3187-3195) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Polyurethanes from benzene polyols synthesized
from vegetable oils: Dependence of physical properties on structure
(p 3196-3203) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Evaluation of properties of unsaturated
polyester/acetylated hydroxypropyl guar gum composites
(p 3204-3210) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Investigation of the phase morphology of
dynamically vulcanized PVC/NBR blends using atomic force microscopy
(p 3211-3219) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Curing mechanisms and kinetic analysis of DGEBA
cured with a novel imidazole derivative curing agent using DSC techniques
(p 3220-3227) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
New smart carrageenan-based superabsorbent
hydrogel hybrid: Investigation of swelling rate and environmental
responsiveness
(p 3228-3238) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Step-growth polymerization of
5-[(9,10-dihydro-9,10-ethanoanthracene-11,12-dicarboximido)-3-methylbutanoyl-amino]isophthalic
acid with aromatic diols
(p 3239-3246) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Comparative investigation on crystallization
conditions dependence of polymorphs composition for 
-nucleated
propylene/ethylene copolymer and propylene homopolymer
(p 3247-3254) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Influence of grafting on structural and optical
properties of nylon-6 fibers
(p 3255-3261) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
SAXS study applied to reversibly crosslinked
isotactic polypropylene/clay nanocomposites
(p 3262-3270) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Synthesis and characterization of a new acrylic
polymeric ibuprofen prodrug
(p 3271-3276) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
One-step synthesis of star-block copolymers via
simultaneous free radical polymerization of styrene and ring opening
polymerization of -caprolacton
using tetrafunctional iniferter
(p 3277-3281) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Nitrophenoxy groups containing polybenzimidazoles
as polymer electrolytes for fuel cells: Synthesis and characterization
(p 3282-3292) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Synthesis and properties of new
poly(amide-imide)s based on 1,3-bis[4,4'-(trimellitimido) phenoxy] propane and
aromatic diamines
(p 3293-3299) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Porous epoxies by reaction induced phase
separation of removable alcohols: Control of spheroidal pore size by mass
fraction, cure temperature, and reaction rate
(p 3300-3307) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Fabrication of aragonite rosette superstructure
through the weak interaction between nonionic polymers and Ca2+
(p 3308-3314) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Synthesis and characterization of biodegradable
crosslinked polymers from 5-hydroxylevulinic acid and ,
-diols
(p 3315-3321) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Thermal bonding of nonwovens as simulated by
polypropylene films: Effect of time, temperature, and molecular weight
(p 3322-3330) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Graft copolymerization of methoxyacrylethyl
phosphate onto expanded poly(tetrafluoroethylene) facial membranes
(p 3331-3339) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Emission properties of composite semiconducting
polymer nanoparticles
(p 3340-3344) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Synthesis and characterization of novel porous
SiO2 material functionalized
with C,C-pyridylpyrazole receptor
(p 3345-3349) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Melt spun microporous fibers using poly(lactic
acid) and sulfonated copolyester blends for tissue engineering applications
(p 3350-3361) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Preparation of chitosan nanoparticles and their
application to Antheraea pernyi silk
(p 3362-3369) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Flame retardance and mechanical properties of a
polyamide 6/polyethylene/surface-modified metal hydroxide ternary composite via
a master-batch method
(p 3370-3378) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Evolutionary computing approach for evaluating
flory distribution curves in gel permeation chromatography: Study of the
poly(1-octene) system
(p 3379-3385) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Synthesis of biodegradable amino-acid-based
poly(ester amide)s and poly(ether ester amide)s with pendant functional groups
(p 3386-3394) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Systematic study of interfacial interactions
between clays and an ionomer
(p 3395-3405) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Preparation and properties of -chitin-whisker-reinforced
hyaluronan-gelatin nanocomposite scaffolds
(p 3406-3418) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Biodegradable microspheres of
poly(3-hydroxybutyrate)/poly(-caprolactone)
loaded with malathion pesticide: Preparation, characterization, and in vitro
controlled release testing
(p 3419-3427) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Friction and wear behavior of
basalt-fabric-reinforced/solid-lubricant-filled phenolic composites
(p 3428-3433) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
The influence of crosslinking agents on the
morphology and electro-optical performances of PDLC films
(p 3434-3440) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Relationship between the material properties and
fatigue crack-growth characteristics of natural rubber filled with different
carbon blacks
(p 3441-3447) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Surface functionalization of wool using 172 nm UV
excimer lamp
(p 3448-3453) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
High-frequency dielectric characterization for
liquid crystalline polyimide/SiO2 nanocomposites
(p 3454-3459) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Effect of vinyl pivalate/vinyl acetate comonomer
composition on the self-assembled morphology of poly(vinyl alcohol) prepared by
in situ fibrillation: Preparation of PVA with a spherical morphology
(p 3460-3465) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Ultraviolet/heat dual-curable film adhesives with
pendant-acryloyl-functional-group-modified epoxy resin
(p 3466-3472) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
The effect of ligand molecular weight on copper
salt catalyzed oxidative coupling polymerization of 2,6-dimethylphenol
(p 3473-3481) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Effect of gamma irradiation on the thermal and
dyeing properties of blends based on waste poly(ethylene terephthalate) blends
(p 3482-3490) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Studies on to
phase
transformations in mechanically deformed PVDF films
(p 3491-3497) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Characterization of acrylic acid grafted
poly(ethylene terephthalate) fabric
(p 3498-3505) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Effects of glycerol content and film thickness on
the properties of vital wheat gluten films cast at pH 4 and 11
(p 3506-3514) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Study of plasma-polyethylene interactions using
electron beam-generated plasmas produced in Ar/SF6
mixtures
(p 3515-3523) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Electroconductive paper prepared by coating with
blends of poly(3,4-ethylenedioxythiophene)/poly(4-styrenesulfonate) and organic
solvents
(p 3524-3532) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Synthesis and characterization of poly(vinyl
alcohol)/water glass (SiO2)
nano-hybrids via sol-gel process
(p 3533-3538) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Synthesis and conductivity performance of
hyperbranched polymer electrolytes with terminal ionic groups
(p 3539-3544) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Preparation and properties of the phenolic foams
with controllable nanometer pore structure
(p 3545-3550) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Grafting of polystyrene and poly(p-chlorostyrene)
from the surface of ramie fiber via RAFT polymerization
(p 3551-3557) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
A simple and efficient way to synthesize
optically active polyamides by solution polycondensation of di-O-methyl-L-tartaryl
chloride with diamines
(p 3558-3567) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Synthesis of agarose-graft-hyaluronan
copolymer and its potential application as a peptide carrier
(p 3568-3574) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Preirradiation-induced emulsion graft
polymerization of glycidyl methacrylate onto poly(vinylidene fluoride) powder
(p 3575-3581) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Ionic conductivity of solid polymer electrolytes
for dye-sensitized solar cells
(p 3582-3587) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Preparation and properties of the single-walled
carbon nanotube/cellulose nanocomposites using N-methylmorpholine-N-oxide
monohydrate
(p 3588-3594) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Effect of sodium hexametaphosphate concentration
on the swelling and controlled drug release properties of chitosan hydrogels
(p 3595-3600) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Physical properties and morphology of films
prepared from microfibrillated cellulose and microfibrillated cellulose in
combination with amylopectin
(p 3601-3609) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Lidocaine release from polycaprolactone threads
(p 3610-3614) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Adsorption of diclofenac sodium from aqueous
solution using polyaniline as a potential sorbent. I. Kinetic studies
(p 3615-3622) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Thermo-mechanical analysis of lead monoxide
filled unsaturated polyester based polymer composite radiation shields
(p 3623-3629) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Alumina-supported microwave synthesis of
Cassia marginata seed gum-graft-polyacrylamide
(p 3630-3638) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
A facile approach for fabricating fluorescent
cellulose
(p 3639-3644) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Adsorption selectivity and dynamic adsorption
behaviors of Cu(II), Ag(I), and Au(III) on silica gel encapsulated by amino
functionalized polystyrene
(p 3645-3650) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Preparation and humic acid fouling resistance of
poly(vinylidene fluoride)-fabric composite membranes for membrane distillation
(p 3651-3658) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Preparation of novel polyindene/polyoxymethylene
blends and investigation of their properties
(p 3659-3664) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Composites of rigid polyurethane foam and
cellulose fiber residue
(p 3665-3672) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Antibacterial activity of novel insoluble
bead-shaped polymer-supported multiquaternary ammonium salts
(p 3673-3678) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Synthesis of poly-N-(thiazol-2-yl)methacrylamide:
Characterization, complexation, and bioactivity
(p 3679-3686) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Effect of vanillin on the miscibility of
poly(vinyl alcohol)/gelatin composite hydrogel: Physical and chemical
properties
(p 3687-3693) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Synthesis and characterization of PEG-PCL-PEG
triblock copolymers as carriers of doxorubicin for the treatment of breast
cancer
(p 3694-3703) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Nickel(II)-imprinted monolithic columns for
selective nickel recognition
(p 3704-3714) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
A novel amide-imide copolymer as a matrix resin
for ultraviolet photoresists: Preparation, properties, and application
(p 3715-3721) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
Thermal and mechanical properties of
poly(urethane-imide)/epoxy/silica hybrids
(p 3722-3728) Journal
of Applied Polymer Science 117 #6 (2010)
Abstract
**************************************************
Journal of Applied Polymer Science 118 #1 (2010)
(Titles and Abstracts) (H)
Effect of surface modification on ionic
permeability across cellophane membrane
(p 1-6)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Reduction of dissolved oxygen in boiler water
using new redox polymers
(p 7-16)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Effect of long-term natural aging on the thermal,
mechanical, and viscoelastic behavior of biomedical grade of ultra high
molecular weight polyethylene
(p 17-24)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Preparation and thermal stability of brominated
natural rubber from latex
(p 25-29)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Effective reinforcement of carbon nanotubes in
polypropylene matrices
(p 30-41)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Novel negatively charged hybrids. 2. Preparation
of silica-based hybrid copolymers and their applications for Cu2+
removal
(p 42-51)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Catalytic oxidation of organic substrates using a
reusable polystyrene-anchored orthometallated palladium(II) complex
(p 52-62)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Study on the synthesis, structure, and properties
of polydimethylsiloxane-acrylate/organophilic montmorillonite nanocomposite
emulsions
(p 63-68)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Synthesis and characterization of
poly(4-diphenylaminostyrene)-Poly(9-vinylanthracene) binary block copolymer
(p 69-73)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Synthesis and properties of polymer from
bis-3,4-ethylenedioxythiophene substituted acenaphthenequinoxaline
(p 74-80)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Preparation and characterization of
elastomer-based nanocomposite gels using an unique latex blending technique
(p 81-90)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Thermally induced solid-state synthesis of
fluorine-containing poly(ether oxadiazole)
(p 91-98)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Synthesis and characterization of novel highly
branched block copoly(urethane-imide)s based on pentaerythritol, different
diisocyanate and aromatic dianhydride
(p 99-104)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Structure and gas permeation properties of
asymmetric polyimide membranes made by dry-wet phase inversion: Influence of the
polyimide molecular weight
(p 105-112)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Preparation and characterization of
polymer/multiwall carbon nanotube/nanoparticle nanocomposites and preparation of
their metal complexes
(p 113-120)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Effect of filler loading on the mechanical
properties of crosslinked 1,2,3-triazole polymers
(p 121-127)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Mesua ferrea L. seed oil-based epoxy
resins
(p 128-134)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Studies on sorption isotherm models of ion
exchange modified acrylic fibers
(p 135-142)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Crystalline morphology of PLA/clay nanocomposite
films and its correlation with other properties
(p 143-151)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Effect of styrene-maleic anhydride as a reactive
compatibilizer on the mechanical properties and flammability of intumescent
flame retardant polystyrene
(p 152-158)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Water-soluble copolymers. V. Synthesis of low
molecular weight amphoteric polyacrylamide by foamed copolymerization
(p 159-164)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Novel N-ethyl-2-styrylquinolinium iodides
as sensitizers in the photoinitiated free-radical polymerization of
trimethylolopropane triacrylate. II
(p 165-172)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Experimental investigation into the effect of
adhesion properties of PEEK modified by atmospheric pressure plasma and low
pressure plasma
(p 173-179)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Influence of environmental conditioning on the
shear behavior of poly(phenylene sulfide)/glass fiber composites
(p 180-187)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Novel clay-based nanobiocomposites of
biopolyesters with synergistic barrier to UV light, gas, and vapour
(p 188-199)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Online pressure-volume-temperature measurements
of polypropylene using a testing mold to simulate the injection-molding process
(p 200-208)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Polyamide 66 binary and ternary nanocomposites:
Mechanical and morphological properties
(p 209-217)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
The effect of 3-(trimethoxysilyl) propyl
methacrylate on the mechanical, thermal, and morphological properties of
poly(methyl methacrylate)/hydroxyapatite composites
(p 218-228)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Solution polymerization of N-vinylcaprolactam
in 1,4-dioxane. Kinetic dependence on temperature, monomer, and initiator
concentrations
(p 229-240)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
A study on Xe*2
excilamp treatment of wool fibers
(p 241-246)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Copper-ion adsorption and gold-ion reduction by
polyphenols prepared by the enzymatic reaction of horseradish peroxidase
(p 247-252)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Antibacterial properties of raw and degummed silk
with nanosilver in various conditions
(p 253-258)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Facile method for the synthesis of
polystyrene-poly(ethylene glycol) block copolymers
(p 259-265)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Effect of weight ratio of thermoplastic and
thermosetting boron-containing phenolic resin on mechanical, bonding, and
ablative properties of thermal insulating composites
(p 266-274)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Preparation and characterization of
graphene/poly(vinyl alcohol) nanocomposites
(p 275-279)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Hyperbranched polyester based on the core + AB2
approach: Synthesis and structural investigation
(p 280-290)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Interaction between the fluorinated amphiphilic
copolymer poly(2,2,3,4,4,4-hexafluorobutyl methacrylate)-graft-poly(SPEG)
and DNA
(p 291-298)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Preparation of quaternized carboxymethyl chitosan
and its capacity to flocculate COD from printing wastewater
(p 299-305)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
The influence of montmorillonite on the
anti-reversion in the rubber-clay composites
(p 306-311)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Structural, mechanical and thermal studies of
double-molded isotactic polypropylene nanocomposites with multiwalled carbon
nanotubes
(p 312-319)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Microcellular foaming of polymethylmethacrylate
in a batch supercritical CO2
process: Effect of microstructure on compression behavior
(p 320-331)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Melt density and volume flow rate of
polypropylene/Al(OH)3/Mg(OH)2
flame retardant composites
(p 332-337)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Study on the structure-mechanical properties
relationship and antistatic characteristics of SSBR composites filled with SiO2/CB
(p 338-345)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Preparation and characterization of the
electrospun nanofibers loaded with clarithromycin
(p 346-352)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Possible use of ultra-fine acrylonitrile
butadiene rubber powder as filler in natural rubber vulcanizates
(p 353-358)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Carbon nanotube reinforced rigid-rod polyimide
(p 359-365)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Pressure dependence of the CO2/propylene
oxide copolymerization catalyzed by zinc glutarate
(p 366-371)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Mechanical reinforcement of cotton fabrics by
grafting polymerization of acrylics
(p 372-377)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Enhanced photodegradation efficiency of
polyethylene-TiO2 nanocomposite
film with oxidized polyethylene wax
(p 378-384)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Effects of diatomite on extrudate swell behavior
of polypropylene composite melts
(p 385-389)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Surface modification of PHBV films with different
functional groups: Thermal properties and in vitro degradation
(p 390-398)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Rapid homogeneous preparation of cellulose graft
copolymer in BMIMCL under microwave irradiation
(p 399-404)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Optimization of electrospinning an SU-8 negative
photoresist to create patterned carbon nanofibers and nanobeads
(p 405-412)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Thermal and optical properties of
gelatin/poly(vinyl alcohol) blends
(p 413-420)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Preparations and temperature- and pH-dependent
release property of ethylcellulose microcapsules containing N-isopropylacrylamide
copolymer
(p 421-427)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Physical characterization of a self-healing
dental restorative material
(p 428-434)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Influence of the filler type on the rupture
behavior of filled elastomers
(p 435-445)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Preparation and characterization of
polyamide-leather wastes polymer composites
(p 446-451)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
The effects of clay dispersion on the mechanical,
physical, and flame-retarding properties of wood fiber/polyethylene/clay
nanocomposites
(p 452-461)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Mass DSC/TG and IR ascertained structure and
color change of polyacrylonitrile fibers in air/nitrogen during thermal
stabilization
(p 462-468)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Isolation and chemical structure characterization
of enzymatic lignin from Populus deltoides wood
(p 469-479)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Flocculated decolorization of vinylsulfone
reactive dye solutions with a -cyclodextrin-based
copolymer
(p 480-485)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Competitive plasticization in ternary plasticized
starch biopolymer system
(p 486-495)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Mechanical properties and morphology of
polylactide, linear low-density polyethylene, and their blends
(p 496-502)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Starch esters with improved mechanical properties
through melt compounding with nanoclays
(p 503-510)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Controlling the architecture of nanofiber-coated
microfibers using electrospinning
(p 511-517)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Polyaniline-maleicacid-dodecylhydrogensulfate
salt as sensor material for toxic gases
(p 518-524)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Aliphatic polyamidoamine hyperbranched
polymers/layered silicate nanocomposites
(p 525-537)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Solid-state mechanical properties of
polypropylene/nylon 6/clay nanocomposites
(p 538-546)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Thermal decomposition kinetics of azomethine
oligomer and its some metal complexes
(p 547-556)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Rheology of bitumen modified by EVA - Organoclay
nanocomposites
(p 557-565)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Effect of organoclay reinforcement on the curing
characteristics and technological properties of SBR sulphur vulcanizates
(p 566-573)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Simple method to determine flow characteristics
of injectable hydrogels
(p 574-579)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Impact behavior of hybrid composite plates
(p 580-587)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Electrospun PEG-PLA nanofibrous membrane for
sustained release of hydrophilic antibiotics
(p 588-595)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
The effect of gamma irradiation on electrical
characteristics of Au/polyvinyl alcohol (Co, Zn-doped)/n-Si Schottky barrier
diodes
(p 596-603)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Rheological properties of elastomer-modified
polypropylene and their influence on the formation of flow marks
(p 604-610)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
Flammability characteristics and performance of
halogen-free flame-retarded polyoxymethylene based on phosphorus-nitrogen
synergistic effects
(p 611-622)
Journal of Applied Polymer Science 118 #1 (2010)
Abstract
***************************************************
Journal of Applied Polymer Science 118 #2 (2010)
(Titles and Abstracts) (H)
The crystallization and morphology of
biodegradable poly(butylene succinate-co-terephthalate) copolyesters with
high content of BT units
(p 623-630)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Control of thermo reversible gelation of
methylcellulose using polyethylene glycol and sodium chloride for sustained
delivery of ophthalmic drug
(p 631-637)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Studies on synthesis and characterization of a
novel acrylic aromatic amide oligomer of aminolysed endproducts generated from
pet waste with hydrazine monohydrate and its photocuring with acrylate monomers
(p 638-645)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Effect of different salts on PVAc/PVdF-co-HFP
based polymer blend electrolytes
(p 646-651)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Two-dimensional electrolyte nature of exfoliated
montmorillonite nanoplatelets fabricated by soap-free emulsion polymerization
and their affinity for cations
(p 652-658)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Structure and properties of biaxial-oriented
crystalline polymers by solid-state crossrolling
(p 659-670)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Study on micellization of poly(N-isopropylacrylamide-butyl
acrylate) macromonomers in aqueous solution
(p 671-677)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Transport selectivity of tribenuron-methyl
imprinted polymer nanowire membrane prepared using N,O-bismethacryloyl
ethanolamine as a functional crosslinking monomer
(p 678-684)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Improvement of tensile properties of ramie yarns
by applying a winding machine with heat treatment
(p 685-692)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Rheology of lubricating greases modified with
reactive NCO-terminated polymeric additives
(p 693-704)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Preparation, characterization, and polymerization
of novel maleimidobenzoxazine containing carboxylic moiety and its cocuring
behaviors with epoxy resin
(p 705-710)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Characterization and structure-property
relationship of chemical oxidative polymerization of poly(para-hydroquinone)
(p 711-720)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Use of chitosan for removal of bisphenol A and
bisphenol derivatives through tyrosinase-catalyzed quinone oxidation
(p 721-732)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Adsorption of Cd(II), Pb(II), and Ag(I) in
aqueous solution on hollow chitosan microspheres
(p 733-739)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
4-Acetoxystyrene nitroxide-mediated controlled
radical polymerization: Comparison with styrene
(p 740-750)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Thermal properties of low loss PTFE-CeO2
dielectric ceramic composites for microwave substrate applications
(p 751-758)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
New rheological method to measure diffusion
coefficient of volatile liquids: Application to butylmethacrylate in molten
polyethylene matrix
(p 759-763)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Experimental and statistical study of the effects
of material properties, curing agents, and process variables on the production
of thermoplastic vulcanizates
(p 764-777)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Zein-based ultrathin fibers containing ceramic
nanofillers obtained by electrospinning. I. Morphology and thermal properties
(p 778-789)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Repeated impacts tests and nanoindentation as
complementary tools for mechanical characterization of polymer-coated particles
(p 790-804)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
The mesh disturbance effects in a low-temperature
cascade arc torch for surface modification of low density polyethylene
(p 805-817)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Modification of poly acrylic acid using
calix[4]arene derivative for the adsorption of toxic heavy metals
(p 818-826)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Crystal structure, curing kinetics, and thermal
properties of bisphenol fluorene epoxy resin
(p 827-833)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Ammonium polyphosphate/montmorillonite
nanocompounds in polypropylene
(p 834-840)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Synergetic behavior of low Tg
polybutadiene polymers and polysiloxanes as components for glass fiber sizing in
composite materials
(p 841-848)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Polymerization of linseed oil with phenolic
resins
(p 849-856)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Preparation and characterization of
polyalginate-glutaraldehyde membranes - Swelling analysis by microcalorimetry
and adsorption kinetics of cationic dye
(p 857-865)
Abstract
Correlation among powder morphology,
compactability, and mechanical properties of consolidated nascent UHMWPE
(p 866-875)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Chemical modification and characterization of
poly(vinyl chloride) by crosslinking of multifunctional amines
(p 876-880)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Selective solid-phase extraction of naphazoline
using imprinted polymers as matrix prepared by precipitation polymerization
(p 881-886)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Mechanical and dynamic mechanical analysis of
hybrid composites molded by resin transfer molding
(p 887-896)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Applied analysis and identification of ancient
lacquer based on pyrolysis-gas chromatography/mass spectrometry
(p 897-901)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Elaboration and characterization of composites of
castor oil-based polyurethane and fibers from alfa stems
(p 902-909)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Effect of glycerol on solution properties
governing morphology, glass transition temperature, and tensile properties of
electrospun zein film
(p 910-919)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
The effects of isocyanate index on the properties
of aliphatic waterborne polyurethaneureas
(p 920-927)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Thermal aging and oxygen permeation of nylon-6
and nylon-6/montmorillonite composites
(p 928-935)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Effect of weak reductant on properties of
electroless copper polyacrylonitrile nanocomposites for electromagnetic
interference shielding
(p 936-942)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Plasma-induced graft polymerization of
poly(ethylene glycol) on poly(methyl methacrylate) surfaces for improving
antistatic property
(p 943-949)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Effect of coefficient of thermal expansion on
positive temperature coefficient of resistivity behavior of HDPE-Cu composites
(p 950-959)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Molecular activation energies (
*2)
of L-lysine,
L-tyrosine, L-proline,
DL-alanine, glycerol, orcinol, iodine,
DTAB, and TMSOI for blending with melamine-formaldehyde-polyvinylpyrrolidone
polymer resin illustrated with SEM
(p 960-968)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
A systematic study on notched impact strength of
super-toughened polyamide 6 nanocomposites using response surface methodology
(p 969-979)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Kinetic modeling of polypropylene thermal
oxidation during its processing by rotational molding
(p 980-996)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Seaweed as novel biofiller in polypropylene
composites
(p 997-1005)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Bamboo fiber reinforced thermosetting resin
composites: Effect of graft copolymerization of fiber with methacrylamide
(p 1006-1013)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Edge effect in RTM processes under constant
pressure injection conditions
(p 1014-1019)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Synthesis of PVC-TEPA-supported proline
derivative and its catalytic behavior in the direct asymmetric aldol reaction
(p 1020-1026)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Structural and mechanical properties of
YBCO-polystyrene composites
(p 1027-1041)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
A new model for estimation of the thermal
conductivity of polymer/clay nanocomposites
(p 1042-1050)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Effect of interfacial strengthening in blends of
reclaimed rubber and polypropylene
(p 1051-1059)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract
Effects of curing systems and polysulfonamide
pulp on the curing characteristics, mechanical properties, and swelling behavior
of ethylene-propylene-diene elastomer composites
(p 1060-1067)
Journal of Applied Polymer Science 118 #2 (2010)
Abstract