-cyclodextrin
enhanced phytoremediation of aged PCBs-contaminated soil from e-waste recycling
area(1482 - 1489) Journal of Environmental Monitoring 12 # 7 (2010)
Copyright 2010 by Roger D. Corneliussen
Below are links to the new articles by journals. A click should take you to the journal website. This is a great variation in where one ends up. In some cases, a click will take you to the issue in other cases a click will take you to the website and you must do a few more clicks to get to the issue. This is controlled by the publisher and not Maro. Fortunately, with a little practice, this should not be a serious problem. (RDC)
All 2020 Entries are listed in
2010 Maro Links
All 2009 Entries are listed in
2009 Maro Links
All 2008 Entries are listed in
2008 Maro Links
Polymer
Track (News)
Updated daily
Week 30 (7/26-7/30)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
01.
Accounts of Chemical
Research 43 #7 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
02.
Additives for Polymers 2010 #7 (2010)
(Titles
only)
Trade Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
03.
Adsorption 16 #3 (2010)
(Titles and Abstracts)
Palladium and platinum sorption using chitosan-based hydrogels
(127-139)
Adsorption 16 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
04.
Advanced Materials 22 #26-27 (2010)
(Titles and Abstracts)
No articles selected
**************************************************
Advanced Materials 22 #28 (2010)
(Titles and Abstracts)
A Microfluidic Hydrogel Capable of Cell
Preservation without Perfusion Culture under Cell-Based Assay Conditions
(p 3017-3021)
Advanced Materials 22 #28 (2010)
Abstract
Fluorene Based Conjugated Polyelectrolyte/Silica
Nanocomposites: Charge-Mediated Phase Aggregation at the Organic-Inorganic
Interface
(p 3032-3037)
Advanced Materials 22 #28 (2010)
Abstract
Nanoscale Imaging of the Interface Dynamics in
Polymer Blends by Femtosecond Pump-Probe Confocal Microscopy
(p 3048-3051)
Advanced Materials 22 #28 (2010)
Abstract
Stable Switching Characteristics of Organic
Nonvolatile Memory on a Bent Flexible Substrate
(p 3071-3075)
Advanced Materials 22 #28 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
05.
Advances in Polymer Technology
29 #2 (2010)
(Titles and Abstracts)
Toughening of basalt fiber-reinforced composites
with a cyclic butylene terephthalate matrix by a nonisothermal production
method
(p 70-79)
Advances in Polymer Technology 29 #2 (2010)
Abstract
Thermoplastic matrix towpreg production
(p 80-85)
Advances in Polymer Technology 29 #2 (2010)
Abstract
Impact of in-line atmospheric plasma fluorination
of carbon fibers on the performance of unidirectional, carbon fiber-reinforced
polyvinylidene fluoride
(p 86-97)
Advances in Polymer Technology 29 #2 (2010)
Abstract
Identification of some optimal parameters to
achieve higher laminate quality through tape placement process
(p 98-111)
Advances in Polymer Technology 29 #2 (2010)
Abstract
Ultrasonic welding of advanced thermoplastic
composites: An investigation on energy-directing surfaces
(p 112-121)
Advances in Polymer Technology 29 #2 (2010)
Abstract
Numerical simulation of the microscale
impregnation in commingled thermoplastic composite yarns
(p 122-130)
Advances in Polymer Technology 29 #2 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
06.
The Analyst 135 #8 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
07.
Angewandte Chemie
International Edition 49 #32 (2010)
(Titles and Abstracts)
The Molecular Mechanism of Spider-Silk Formation
(p 5410-5412)
Angewandte Chemie International Edition 49 #32 (2010)
Abstract
The Catalytic Z to E Isomerization
of Stilbenes in a Photosensitizing Porous Coordination Network
(p 5507-5509)
Angewandte Chemie International Edition 49 #32 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
08.
Analytical Letters 43 #10-11 (2010)
(Titles and Abstracts)
Determination of Chemical Homogeneity of Fire Retardant Polymeric Nanocomposite
Materials by Near-Infrared Multispectral Imaging Microscopy
(1780 – 1789)
Analytical Letters 43 #10-11 (2010)
*************************************************
Analytical Letters 43 #12 (2010)
(Titles and Abstracts)
A Polymer Membrane Electrode Based on a Zinc(II) Schiff Base Complex for the
Selective Determination of Sodium Benzoate
(1989 – 1998)
Analytical Letters 43 #12 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
09.
Applied
Clay Science 49 #5 (2010)
(Titles
and Abstracts)
Structure and thermal behaviour of polyhedral
oligomeric silsesquioxane modified montmorillonite
(113-119)
Applied Clay Science 49 #5 (2010)
Montmorillonite particle alignment and
crystallization and ion-conducting behavior of montmorillonite/poly(ethylene
oxide) nanocomposites
(163-169)
Applied Clay Science 49 #5 (2010)
Montmorillonite nanocomposites with
electron-beam modified atactic polypropylene
(200-204)
Applied Clay Science 49 #5 (2010)
Organo-montmorillonite barrier layers formed by
combustion: Nanostructure and permeability
(213-223)
Applied Clay Science 49 #5 (2010)
Reducing the print-through phenomenon and
increasing the curing degree of UP/ST/organo-montmorillonite nanocomposites
(224-228)
Applied Clay Science 49 #5 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
10.
Applied Physics
Letters 97 #3 (2010)
Titles and Abstracts
Functionalized multiwall carbon nanotubes incorporated polymer/fullerene
hybrid photovoltaics
(# 033105)
Applied Physics Letters 97 #3 (2010)
Terahertz complex conductivities of carriers with partial localization in
doped polythiophenes
(# 033308)
Applied Physics Letters 97 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
11.
Applied Surface Science 256 #24 (2010)
(Titles
and Abstracts)
Modification of hydrophobic acrylic intraocular
lens with poly(ethylene glycol) by atmospheric pressure glow discharge: A facile
approach
(7354-7364)
Applied Surface Science 256 #24 (2010)
Atomic oxygen erosion resistance of
polyimide/ZrO2 hybrid films
(7384-7388)
Applied Surface Science 256 #24 (2010)
A fluorine-contained copolymer ultra-thin film:
Stability and electrochemical corrosion behavior
(7389-7394)
Applied Surface Science 256 #24 (2010)
Development of hydrogel microstructures on
single-walled carbon nanotube films
(7428-7433)
Applied Surface Science 256 #24 (2010)
Surface characteristics of coated soft- and
hardwoods due to UV-B ageing
(7504-7509)
Applied Surface Science 256 #24 (2010)
Field emission properties of carbon nanotube
cathodes produced using composite plating
(7600-7605)
Applied Surface Science 256 #24 (2010)
Improvement of organic solar cells by flexible
substrate and ITO surface treatments
(7606-7611)
Applied Surface Science 256 #24 (2010)
Synthesis, characterization and analytical
applications of Ni(II)-ion imprinted polymer
(7632-7637)
Applied Surface Science 256 #24 (2010)
Effects of moisture absorption and surface
modification using 3-aminopropyltriethoxysilane on the tensile and fracture
characteristics of MWCNT/epoxy nanocomposites
(7658-7667)
Applied Surface Science 256 #24 (2010)
A study of AFM-based scratch process on
polycarbonate surface and grating application
(7668-7671)
Applied Surface Science 256 #24 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
12.
Archive of Applied
Mechanics 80
#9 (2010)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
13.
Chemical Communications #29 (2010)
(Titles, Abstracts and Articles)
Enzymatic formation of a photoresponsive supramolecular hydrogel
(5364 - 5366)
Chemical Communications #29 (2010)
Electrodeposited PEDOT-on-plastic cathodes for dye-sensitized solar cells
(5367 - 5369)
Chemical Communications #29 (2010)
*************************************************
Chemical Communications #30 (2010)
(Titles, Abstracts and Articles)
Responsive polyelectrolyte complexes for triggered release of nucleic acid
therapeutics
(5421 - 5433)
Chemical Communications #30 (2010)
A bifunctionalized [3]rotaxane and its incorporation into a mechanically
interlocked polymer
(5536 - 5538)
Chemical Communications #30 (2010)
High aspect ratio nanoscale multifunctional materials derived from hollow carbon
nanofiber by polymer insertion and metal decoration
(5590 - 5592)
Chemical Communications #30 (2010)
Chitosan as efficient porous support for dispersion of highly active gold
nanoparticles: design of hybrid catalyst for carbon–carbon bond formation
(5593 - 5595)
Chemical Communications #30 (2010)
Colloidal graphene oxide/polyaniline nanocomposite and its electrorheology
(5596 - 5598)
Chemical Communications #30 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
14.
Chemical Physics Letters 495 #1-3 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
15.
Chemical
Society Reviews 39 #8 (2010)
(Titles and Abstracts)
Polymeric self-assembled monolayers derived from surface-active copolymers: a
modular approach to functionalized surfaces
(2935 - 2947)
Chemical
Society Reviews 39 #8 (2010)
Mesogen-jacketed liquid crystalline polymers
(3072 - 3101)
Chemical
Society Reviews 39 #8 (2010)
Proton-conducting membranes based on benzimidazole polymers for high-temperature
PEM fuel cells. A chemical quest
(3210 - 3239)
Chemical
Society Reviews 39 #8 (2010)
Recent developments in the utilization of green solvents in polymer chemistry
(3317 - 333)
Chemical
Society Reviews 39 #8 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
16.
Chemical
Week
Titles and Abstracts) Weekly (H)
Trade
Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
17.
Chemistry
and Ecology
26 #4 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
18.
Chemistry of Materials 22 #14 (2010)
(Titles
and Abstracts)
Dewetting-Induced Formation of Periodic Dot Arrays of Polymer/Au Composites by
Capillary Force Lithography
(4166–4174)
Chemistry of Materials 22 #14 (2010)
Highly Stable Semiconducting Polymers Based on Thiazolothiazole
(4191–4196)
Chemistry of Materials 22 #14 (2010)
Thermo-Responsive Core−Sheath Electrospun Nanofibers from Poly (N-isopropylacrylamide)/Polycaprolactone
Blends
(4214–4221)
Chemistry of Materials 22 #14 (2010)
Flexible, Highly Transparent, and Conductive
Poly(3,4-ethylenedioxythiophene)-Polypropylene Composite Films of Nanofibrillar
Morphology
(4254–4262)
Chemistry of Materials 22 #14 (2010)
Spin Crossover Phenomenon in Nanocrystals and Nanoparticles of
[Fe(3-Fpy)2M(CN)4] (MII = Ni, Pd, Pt) Two-Dimensional Coordination Polymers
(4271–4281)
Chemistry of Materials 22 #14 (2010)
Well-Defined Hierarchical Templates for Multimodal Porous Material Fabrication
(4312–4319)
Chemistry of Materials 22 #14 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
19.
Chinese Journal of
Polymer Science 28, #5 (2010)
(Titles and Abstracts)
Electrochemical polymerization of nano-micro sheaf/wire conducting polymer
poly[Ni(salen)] for electrochemical energy storage system
(667-671)
Chinese Journal of Polymer Science 28, #5 (2010)
Synthesis and characterization of graft copolymer (alginate-g-poly(N,N-dimethylacrylamide))
(673-683)
Chinese Journal of Polymer Science 28, #5 (2010)
Eco-friendly fast synthesis and thermal degradation of optically active
polyamides under microwave accelerating conditions
(685-694)
Chinese Journal of Polymer Science 28, #5 (2010)
Synthesis and characterization of optically active poly(amide-imide)s containing
photosensitive chalcone units in the main chain
(695-704)
Chinese Journal of Polymer Science 28, #5 (2010)
Improving hydrophilicity and protein antifouling of electrospun
poly(vinylidenefluoride-hexafluoropropylene) nanofiber membranes
(705-713)
Chinese Journal of Polymer Science 28, #5 (2010)
Synthesis of hydroxyl-terminated polybutadiene possessing high content of
1,4-units via anionic polymerization
(715-720)
Chinese Journal of Polymer Science 28, #5 (2010)
Structure and performance of polyamide-6 membranes prepared by thermally induced
phase separation
(721-729)
Chinese Journal of Polymer Science 28, #5 (2010)
Synthesis and characterization of novel optically active poly(amide-imide)s and
poly(ester-imide)s containing calix[4]arene and amino acid units with binding
ability towards alkali metal and toxic heavy metal cations
(731-743)
Chinese Journal of Polymer Science 28, #5 (2010)
Synchrotron investigation on mesomorphic structure of sPP and
poly(ethylene-co-octene) in their initial crystallization stage
(745-751)
Chinese Journal of Polymer Science 28, #5 (2010)
Ammonium sulfamate flame retarded polyamide 6: Morphology and thermal
degradation
(753-759)
Chinese Journal of Polymer Science 28, #5 (2010)
Radiation grafted poly(vinylidene fluoride)-graft-polystyrene sulfonic
acid membranes for fuel cells: Structure-property relationships
(761-770)
Chinese Journal of Polymer Science 28, #5 (2010)
Electrosyntheses and characterization of a fluorescent conducting copolymer of
benzanthrone and thiophene
(771-780)
Chinese Journal of Polymer Science 28, #5 (2010)
Stabilization of electrospun poly(vinyl alcohol) nanofibrous mats in aqueous
solutions
(781-788)
Chinese Journal of Polymer Science 28, #5 (2010)
A steered molecular dynamics simulation on the elastic behavior of adsorbed star
polymer chains
(789-799)
Chinese Journal of Polymer Science 28, #5 (2010)
Chitosan and multi-walled carbon nanotube composite rods
(801-806)
Chinese Journal of Polymer Science 28, #5 (2010)
Reparation of silica/poly(methacrylic acid)/poly(divinylbenzene-co-methacrylic
acid) tri-layer microspheres and the corresponding hollow polymer microspheres
with movable silica core
(807-817)
Chinese Journal of Polymer Science 28, #5 (2010)
Synthesis of heteroarm star polymers comprising poly(4-methylphenyl vinyl
sulfoxide) segment by living anionic polymerization
(819-828)
Chinese Journal of Polymer Science 28, #5 (2010)
Initiator-free photocrosslinking of electrospun biodegradable polyester fiber
based tubular scaffolds and their cell affinity for vascular tissue engineering
(829-840)
Chinese Journal of Polymer Science 28, #5 (2010)
Facile fabrication of large scale microtubes with a natural template — Kapok
fiber
(841-847)
Chinese Journal of Polymer Science 28, #5 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
20.
Chinese Physics B 19 #7 (2010)
(Titles
and Abstracts; Full PDF versions of Articles are available free for 30 days after
publication)
Properties of C60 thin film transistor based on polystyrene
(# 077305)
Chinese Physics B 19 #7 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
21.
Colloids
and Surfaces B: Biointerfaces 80 #2 (2010)
(Titles and Abstracts)
Dual-response nanocarrier based on graft
copolymers with hydrazone bond linkages for improved drug delivery
(145-154)
Colloids
and Surfaces B: Biointerfaces 80 #2 (2010)
Effects of extraction procedures on metal
binding properties of extracellular polymeric substances (EPS) from anaerobic
granular sludges
(161-168)
Colloids
and Surfaces B: Biointerfaces 80 #2 (2010)
Surface biocompatible modification of
polypropylene by entrapment of polypropylene-block-poly(vinylpyrrolidone)
(200-205)
Colloids
and Surfaces B: Biointerfaces 80 #2 (2010)
Effect of porous silica on sustained release
behaviors of pH sensitive Pluronic F127/poly(acrylic acid) hydrogels containing
tulobuterol
(240-246)
Colloids
and Surfaces B: Biointerfaces 80 #2 (2010)
Preparation of polypropylene superhydrophobic
surface and its blood compatibility
(247-250)
Colloids
and Surfaces B: Biointerfaces 80 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
22.
Combustion Science and Technology 182 #8 (2010)
(Titles
and Abstracts) S
Modeling the Velocity of Self-Propagating Exothermic Reactions in Multilayer
Foils
(1000 – 1008)
Combustion Science and Technology 182 #8 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
23.
Composites Part A: Applied Science and Manufacturing 41 #9 (2010)
(Titles and Abstracts)
Identification of interfacial and interphasal
failure in composites of plasma polymer coated fibres
(1047-1055)
Composites Part A: Applied Science and Manufacturing 41 #9 (2010)
Compressive strength of composite laminates
following free edge impact
(1056-1065)
Composites Part A: Applied Science and Manufacturing 41 #9 (2010)
The effects of interfacial interactions on
lamellar morphologies in thin and ultrathin films and nanocomposites of LLDPE
(1066-1071)
Composites Part A: Applied Science and Manufacturing 41 #9 (2010)
Predicting the thermomechanical properties of
an epoxy resin blend as a function of temperature and strain rate
(1072-1076)
Composites Part A: Applied Science and Manufacturing 41 #9 (2010)
Interface strength in glass fibre–polypropylene
measured using the fibre pull-out and microbond methods
(1077-1083)
Composites Part A: Applied Science and Manufacturing 41 #9 (2010)
Correlation between interfacial molecular
structure and mechanics in CNT/epoxy nano-composites
(1093-1098)
Composites Part A: Applied Science and Manufacturing 41 #9 (2010)
Carbon nanotube grafted carbon fibres: A study
of wetting and fibre fragmentation
(1107-1114)
Composites Part A: Applied Science and Manufacturing 41 #9 (2010)
Atmospheric plasma fluorination as a means to
improve the mechanical properties of short-carbon fibre reinforced poly (vinylidene
fluoride)
(1115-1122)
Composites Part A: Applied Science and Manufacturing 41 #9 (2010)
Cardanol–formaldehyde thermoset composites
reinforced with buriti fibers: Preparation and characterization
(1123-1129)
Composites Part A: Applied Science and Manufacturing 41 #9 (2010)
Machinability analysis in drilling woven GFR/epoxy
composites: Part II – Effect of drill wear
(1130-1137)
Composites Part A: Applied Science and Manufacturing 41 #9 (2010)
Bondline strength evaluation of cocure/precured
honeycomb sandwich structures under aircraft hygro and repair environments
(1138-1147)
Composites Part A: Applied Science and Manufacturing 41 #9 (2010)
Analytical formulation of subsurface stresses
during orthogonal cutting of FRPs
(1164-1173)
Composites Part A: Applied Science and Manufacturing 41 #9 (2010)
Role of tool-part interaction in
process-induced warpage of autoclave-manufactured composite structures
(1174-1183)
Composites Part A: Applied Science and Manufacturing 41 #9 (2010)
Correlation between Young’s modulus and
impregnation quality of epoxy-impregnated SWCNT buckypaper
(1184-1191)
Composites Part A: Applied Science and Manufacturing 41 #9 (2010)
Finite element modelling of tow geometry in 3D
woven fabrics
(1192-1200)
Composites Part A: Applied Science and Manufacturing 41 #9 (2010)
Electrical and thermophysical properties of
epoxy/aluminum nitride nanocomposites: Effects of nanoparticle surface
modification
(1201-1209)
Composites Part A: Applied Science and Manufacturing 41 #9 (2010)
High temperature and fire behaviour of
continuous glass fibre/polypropylene laminates
(1219-1231)
Composites Part A: Applied Science and Manufacturing 41 #9 (2010)
Sheet moulding compound (SMC) from carbon fibre
recyclate
(1232-1237)
Composites Part A: Applied Science and Manufacturing 41 #9 (2010)
Syntactic foams from copolymers based on
epoxidized soybean oil
(1238-1244)
Composites Part A: Applied Science and Manufacturing 41 #9 (2010)
Mercerization of sisal fibers: Effect of
tension on mechanical properties of sisal fiber and fiber-reinforced composites
(1245-1252)
Composites Part A: Applied Science and Manufacturing 41 #9 (2010)
Flexural creep of long fiber-reinforced
thermoplastic composites: Effect of processing-dependent fiber variables on
creep response
(1253-1262)
Composites Part A: Applied Science and Manufacturing 41 #9 (2010)
A study on mechanical properties of bacterial
cellulose/epoxy reinforced by plain woven carbon fiber modified with liquid
rubber
(1263-1271)
Composites Part A: Applied Science and Manufacturing 41 #9 (2010)
Reinforcing effects of Kevlar fiber on the
mechanical properties of wood-flour/high-density-polyethylene composites
(1272-1278)
Composites Part A: Applied Science and Manufacturing 41 #9 (2010)
Green composites from a conjugated linseed
oil-based resin and wheat straw
(1279-1288)
Composites Part A: Applied Science and Manufacturing 41 #9 (2010)
Creep of plain weave polymer matrix composites
under on-axis and off-axis loading
(1289-1300)
Composites Part A: Applied Science and Manufacturing 41 #9 (2010)
Internal geometry evaluation of non-crimp 3D
orthogonal woven carbon fabric composite
(1301-1311)
Composites Part A: Applied Science and Manufacturing 41 #9 (2010)
Design of filament–wound domes based on
continuum theory and non-geodesic roving trajectories
(1312-1320)
Composites Part A: Applied Science and Manufacturing 41 #9 (2010)
Carbon nanotubes/cyanate ester composites with
low percolation threshold, high dielectric constant and outstanding thermal
property
(1321-1328)
Composites Part A: Applied Science and Manufacturing 41 #9 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
24.
Dalton
Transactions #30 (2010)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
25.
Doklady Chemistry 433 #1 (2010)
(Titles only)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
26.
Engineering Fracture Mechanics 77 #13 (2010)
(Titles and Abstracts)
Examination of the failure behaviour of wood
with a short crack in the tangential–radial system by single-edge-notched
bending test
(2527-2536)
Engineering Fracture Mechanics 77 #13 (2010)
Mode I and mode II initiation fracture
toughness and resistance curve of medium density fiberboard measured by double
cantilever beam and three-point bend end-notched flexure tests
(2537-2549)
Engineering Fracture Mechanics 77 #13 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
27.
Engineering Optimization 42 #8 (2010)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
28.
e-Polymers (7/27/2010) (67)
(Titles, Abstracts and Articles)
064[2010] Synthesis and characterization of
cis-5-norbornene-2,3-dicarboxylic anhydride-chitosan
e-Polymers (7/27/2010) (67)
[Abstract]
065[2010] Synthesis and quaternization of nitroxide-terminated
poly(4-vinylpyridine-co-acrylonitrile) macroinitiators and related diblock
copolymers
[Abstract]
066[2010] Kinetics and thermodynamics of indanthrene textile dye adsorption
onto chitosan
e-Polymers (7/27/2010) (67)
[Abstract]
067[2010] Synthesis and characterization of
alpha-butyl-omega-{3-[(2,2-dihydroxymethyl)-propionyloxy]}propylpolydimethylsiloxane
e-Polymers (7/27/2010) (67)
[Abstract]
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
29.
Fibre
Chemistry 41 #6 ( 2009)
(Titles and Abstracts)
Boiling of tricots made of a blend of cotton and modified Nitron fibre
(345-349) Fibre
Chemistry 41 #6 ( 2009)
Modification of textile fibres with nanolayers of fluorine-containing
interpolymer complexes
(350-354) Fibre
Chemistry 41 #6 ( 2009)
Method of manufacturing nonwovens by electrospinning from polymer melts
(355-359) Fibre
Chemistry 41 #6 ( 2009)
Anisotropy of the conductivity of carbon fibre materials
(360-363) Fibre
Chemistry 41 #6 ( 2009)
Evaluating the properties of sewing thread for items for industrial and special
applications in standardizing them
(364-368) Fibre
Chemistry 41 #6 ( 2009)
Mechanism of compression of needle-punch material
(369-371) Fibre
Chemistry 41 #6 ( 2009)
What’s new in functionalization of synthetic fibres and materials made from them
with metal complexes
(372-376) Fibre
Chemistry 41 #6 ( 2009)
Physical chemistry of fibre-forming polymers transformation of emission
brightness in polymer fibres
(377-378) Fibre
Chemistry 41 #6 ( 2009)
Quantitative IR spectroscopy of polymer fibres and filaments containing
interfibre media
(379-380) Fibre
Chemistry 41 #6 ( 2009)
Evaluation of the optical characteristics of composite films with carbon fillers
in the IR range of wavelengths
(381-384) Fibre
Chemistry 41 #6 ( 2009)
Overview of Poly(lactic acid) (PLA) Fibre
Part I: Production, Properties, Performance, Environmental
Impact, and End-use Applications of Poly(lactic acid) Fibres
(391-401) Fibre
Chemistry 41 #6 ( 2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
30.
Fire Safety Journal 45 #5 (2010)
(Titles and Abstracts) S
Comparison of FDS predictions by different
combustion models with measured data for enclosure fires
(298-313)
Fire Safety Journal 45 #5 (2010)
An integrated numerical simulator for thermal
performance assessments of firefighters’ protective clothing
(314-326)
Fire Safety Journal 45 #5 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
31.
Fluid
Phase Equilibria 296 #2 (2010)
(Titles
and Abstracts)
Molecular dynamics and experimental study of
conformation change of poly(N-isopropylacrylamide) hydrogels in water
(164-172)
Fluid
Phase Equilibria 296 #2 (2010)
Solute partitioning in polymer–salt ATPS: The
Collander equation
(173-177)
Fluid
Phase Equilibria 296 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
32.
International Biodeterioration & Biodegradation 64 #6 (2010)
(Titles and Abstracts)
Growth of
Pseudomonas and Bacillus
biofilms on pretreated polypropylene surface
(530-536)
International Biodeterioration & Biodegradation 64 #6 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
33.
International Journal of Multiphase Flow 36, #9 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
34.
International Journal of Non-Linear Mechanics 44 #8 (2010)
(Titles
and Abstracts)
An investigation into the effects of
electrostatic and squeeze-film non-linearities on the shock spectrum of
microstructures
(756-765)
International Journal of Non-Linear Mechanics 44 #8 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
35.
International Journal of Plasticity 26 #7 (2010)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
36.
International Journal of Polymeric Materials 59 #8 (2010)
(Titles and Abstracts)
Synthesis, Characterization and Application of a Multi-Site Phase Transfer
Catalyst in Radical Polymerization of n-Butyl Methacrylate—A Kinetic Study
(647 – 662)
International Journal of Polymeric Materials 59 #8 (2010)
The Effect of Dy(III) Complex with 2-Mercaptobenzimidazole on the
Thermo-Oxidation Aging Behavior of Natural Rubber Vulcanizates
(663 – 679)
International Journal of Polymeric Materials 59 #8 (2010)
Poly-Para-Phenylene-Copolymer (PPP): A High-Strength Polymer with Interesting
Mechanical and Tribological Properties
(680 – 692)
International Journal of Polymeric Materials 59 #8 (2010)
Experimental Design in the Preparation of Modified HEMA-Based Superporous
Hydrogels in an Aqueous Medium
(693 – 709)
International Journal of Polymeric Materials 59 #8 (2010)
Heterogeneous Structures in the Synthesis of Hydrophobic Lauryl Acrylate-Styrene-Ethylene
Glycol Dimethacrylate Copolymer Particles
(710 – 724)
International Journal of Polymeric Materials 59 #8 (2010)
Synthesis of PLA-co-PGMA Copolymer and its Application in the Surface
Modification of Bacterial Cellulose
(725 – 737)
International Journal of Polymeric Materials 59 #8 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
37.
International
Journal of Thermophysics 31 #4-5 (2010)
(Titles and Abstracts)
Thermophysical and Electrical Properties of Nanocomposites Based on Ethylene–Vinylacetate
Copolymer (EVA) Filled with Expanded and Unexpanded Graphite
(936-948)
International Journal of Thermophysics 31 #4-5 (2010)
Generalized Bruggeman Formula for the Effective Thermal Conductivity of
Particulate Composites with an Interface Layer
(975-986)
International Journal of Thermophysics 31 #4-5 (2010)
Thermal Degradation Studies on Polyaniline–Polypyrrole Copolymers Prepared by
Microemulsion Methods
(1037-1050)
International Journal of Thermophysics 31 #4-5 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
38.
Journal of Agricultural and Food Chemistry 58 #14 (2010)
(Titles and Abstracts)
Analysis and Chemistry of Migrants from Wine Fining Polymers
(8300–8304)
Journal of Agricultural and Food Chemistry 58 #14 (2010)
Quantitative Determination of Interactions Between Tannic Acid and a Model
Protein Using Diffusion and Precipitation Assays on Cellulose Membranes
(8375–8379)
Journal of Agricultural and Food Chemistry 58 #14 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
39.
Journal of the American Chemical Society 132 #29 (2010)
(Titles and Abstracts)
Highly Tunable Photoluminescent Properties of Amphiphilic Conjugated Block
Copolymers
(9931–9933)
Journal of the American Chemical Society 132 #29 (2010)
Synthesis of Glycopolymers for Microarray Applications via Ligation of Reducing
Sugars to a Poly(acryloyl hydrazide) Scaffold
(9963–9965)
Journal of the American Chemical Society 132 #29 (2010)
AAB-Sequence Living Radical Chain Copolymerization of Naturally Occurring
Limonene with Maleimide: An End-to-End Sequence-Regulated Copolymer
(10003–10005)
Journal of the American Chemical Society 132 #29 (2010)
Modification of the Optoelectronic Properties of Membranes via Insertion of
Amphiphilic Phenylenevinylene Oligoelectrolytes
(10042–10052)
Journal of the American Chemical Society 132 #29 (2010)
Flexibility of Shape-Persistent Molecular Building Blocks Composed of p-Phenylene
and Ethynylene Units
(10107–10117)
Journal of the American Chemical Society 132 #29 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
40.
Journal
of Analytical Atomic Spectroscopy
25 #7 (2010)
(Titles
and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
41.
Journal of Chemical Information and Modeling 50 #7 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
42.
Journal of Chemical Physics 133 #3 (2010)
(Titles and Abstracts)
First-principles calculations on anharmonic vibrational frequencies of
polyethylene and polyacetylene in the Γ
approximation
(# 034110)
Journal of Chemical Physics 133 #3 (2010)
Structural changes of poly(N-isopropylacrylamide)-based
microgels induced by hydrostatic pressure and temperature studied by small angle
neutron scattering
(# 034901)
Journal of Chemical Physics 133 #3 (2010)
Adsorption of a wormlike polymer in a potential well near a hard wall:
Crossover between two scaling regimes
(# 034902)
Journal of Chemical Physics 133 #3 (2010)
Structural modeling of carbonaceous mesophase amphotropic mixtures under
uniaxial extensional flow
(# 034903)
Journal of Chemical Physics 133 #3 (2010)
Molecular dynamics simulations of polymer crystallization in highly
supercooled melt: Primary nucleation and cold crystallization
(# 034904)
Journal of Chemical Physics 133 #3 (2010)
Monte Carlo study of oligopyrroles in condensed phases
(# 034905)
Journal of Chemical Physics 133 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
43.
Journal of Colloid and Interface Science 349 #2 (2010)
(Titles and Abstracts)
Controlling surface porosity and release from
hydrogels using a colloidal particle coating
(498-504)
Journal of Colloid and Interface Science 349 #2 (2010)
Colloidal thermoresponsive gel forming hybrids
(527-536)
Journal of Colloid and Interface Science 349 #2 (2010)
Self-assembly of a series of random copolymers
bearing amphiphilic side chains
(560-564)
Journal of Colloid and Interface Science 349 #2 (2010)
Removal of Cu(II) ions from aqueous streams
using poly(acrylic acid-co-acrylamide) hydrogels
(583-593)
Journal of Colloid and Interface Science 349 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
44.
Journal of Dispersion Science and Technology 31 #8 (2010)
(Titles and Abstracts)
Synthesis and Evaluation of Novel Polymeric Phosphate Surfactants for Oil-Based
Muds
(1011 – 1018)
Journal of Dispersion Science and Technology 31 #8 (2010)
Evaluation of Surface Active Properties and Voltammetric Characterizations of
Some New Anionic Copolymer Surfactants
(1033 – 1042)
Journal of Dispersion Science and Technology 31 #8 (2010)
Adsorption of Some Surfactants onto Polyvinyl Alcohol as Hydrophobic Polymer
Surface
(1091 – 1099)
Journal of Dispersion Science and Technology 31 #8 (2010)
Studies on the Uptake of Rare Earth Elements on Polyacrylamidoxime Resins from
Natural Concentrate Leachate Solutions
(1128 – 1135)
Journal of Dispersion Science and Technology 31 #8 (2010)
Formation Optimization and Electrocatalytic Properties of Platinum-Modified
Polyaniline Films
(1136 – 1139)
Journal of Dispersion Science and Technology 31 #8 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
45.
Journal of Electrostatics 68, #4 (2010)
(Titles and Abstracts)
The effect of electric field stress on pure
poly(vinyl chloride), poly(methyl methacrylate) and their polyblend samples
(328-336)
Journal of Electrostatics 68, #4 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
46.
Journal
of Engineering Physics and Thermophysics 83 #3 (2010)
(Titles and Abstracts)
Coalescence and the initial stage of formation of nanofibers by the
"vapor–liquid–solid" scheme
(439-442)
Journal of Engineering Physics and Thermophysics 83 #3 (2010)
Structural changes in a clay-containing nanocomposite with a different moisture
content caused by its deformation
(443-451)
Journal of Engineering Physics and Thermophysics 83 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
47.
Journal of Environmental Monitoring 12 # 5 (2010)
(Titles and Abstracts)
No articles selected
**************************************************
Journal of Environmental Monitoring 12 # 6 (2010)
(Titles and Abstracts)
No articles selected
**************************************************
Journal of Environmental Monitoring 12 # 7 (2010)
(Titles and Abstracts)
-cyclodextrin
enhanced phytoremediation of aged PCBs-contaminated soil from e-waste recycling
area
(1482 - 1489)
Journal of Environmental Monitoring 12 # 7 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
48.
Journal of Fire Protection Engineering 20 #2 (2010)
(Titles and Abstracts) S
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
49.
Journal
of Fire Sciences
28 #3 (2010)
(Titles and Abstracts) S
Quantification of Zinc Hydroxystannate** and Stannate**
Synergies in Halogen-containing Flame-retardant Polymeric Formulations
(217-248)
Journal of Fire Sciences 28 #3 (2010)
Abstract
The Modeling of Heat Transfer across Intumescent Polymer
Coatings
(249-277)
Journal of Fire Sciences 28 #3 (2010)
Abstract
Experimental Investigations of Fire Spread and Flashover
Time in Office Fires
(279-302)
Journal of Fire Sciences 28 #3 (2010)
Abstract
Sub-LFL Flame Kernels in Flash Point Tests: A Reappraisal of
the Observations
(303-304)
Journal of Fire Sciences 28 #3 (2010)
Abstract
****************************************************
Journal
of Fire Sciences
28 #4 (2010)
(Titles and Abstracts) S
Physical Scale Modeling of Smoke Contamination in Upper
Balconies by a Channeled Balcony Spill Plume in an Atrium
(313-336) Journal
of Fire Sciences 28 #4 (2010)
Abstract
Convective Heat Transfer of the Bunsen Flame in the UL94
Vertical Burning Test for Polymers
(337-356) Journal
of Fire Sciences 28 #4 (2010)
Abstract
Enhancement of Passive Fire Protection Ability of Inorganic
Fire Retardants in Vinyl Ester Resin Using Glass Frit Synergists
(357-381) Journal
of Fire Sciences 28 #4 (2010)
Abstract
Effect of Different Fuels on Confined Compartment Fire
(383-403) Journal
of Fire Sciences 28 #4 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
50.
Journal of Fluids Engineering 132 #5 (2010)
(Titles and Abstracts)
Flows and Their Stability in Rotating Cylinders With a
Porous Lining
(# 051201) Journal
of Fluids Engineering 132 #5 (2010)
Abstract
Flow Characteristics of Microglass Fiber Suspension in
Polymeric Fluids in Spherical Gaps
(# 051205) Journal
of Fluids Engineering 132 #5 (2010)
Abstract
**************************************************
Journal of Fluids Engineering 132 #6 (2010)
(Titles and Abstracts)
No articles selected
**************************************************
Journal of Fluids Engineering 132 #7 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
51.
Journal of Fluids and Structures 26 #4 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
52.
Journal of Fluorescence 20 #3
(2010)
(Titles and Abstracts)
Polarity Assessment of Thermoresponsive Poly(NIPAM-co-NtBA) Copolymer Films
Using Fluorescence Methods
(719-731) Journal
of Fluorescence 20 #3 (2010)
Fluorescence Quenching Reaction of Polyvinylpyrrolidone-Eosin Y System for the
Determination of Polyvinylpyrrolidone
(733-738) Journal
of Fluorescence 20 #3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
53.
Journal of
Fluorine Chemistry 131, #6 (2010)
Titles and Abstracts
New synthesis methods for fluorinated carbon
nanofibres and applications
(676-683)
Journal of
Fluorine Chemistry 131, #6 (2010)
Preparation and characterization of a novel
fluorinated acrylate resin
(731-737)
Journal of
Fluorine Chemistry 131, #6 (2010)
*************************************************
Journal of
Fluorine Chemistry 131, #7 (2010)
Titles and Abstracts
Synthesis and characterization of fluorinated
polyimides derived from novel unsymmetrical diamines
(767-775)
Journal of
Fluorine Chemistry 131, #7 (2010)
*************************************************
Journal of
Fluorine Chemistry 131, #8 (2010)
Titles and Abstracts
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
54.
Journal of Hazardous Materials 179 #1-3 (2010)
(Titles and Abstracts)
Low temperature conversion of plastic waste
into light hydrocarbons
(15-20)
Journal of Hazardous Materials 179 #1-3 (2010)
Permeation of chlorothalonil through nitrile
gloves: Collection solvent effects in the closed-loop permeation method
(57-62)
Journal of Hazardous Materials 179 #1-3 (2010)
Adsorption of Cr(VI) using Fe-crosslinked
chitosan complex (Ch-Fe)
(192-196)
Journal of Hazardous Materials 179 #1-3 (2010)
Performance and thermal behavior of wood
plastic composite produced by nonmetals of pulverized waste printed circuit
boards
(203-207)
Journal of Hazardous Materials 179 #1-3 (2010)
Preparation of dummy template imprinted
polymers at surface of silica microparticles for the selective extraction of
trace bisphenol A from water samples
(223-229)
Journal of Hazardous Materials 179 #1-3 (2010)
Experimental study on the fire protection
properties of PVC sheath for old and new cables
(373-381)
Journal of Hazardous Materials 179 #1-3 (2010)
Modeling of fixed-bed column studies for the
adsorption of cadmium onto novel polymer–clay composite adsorbent
(415-423)
Journal of Hazardous Materials 179 #1-3 (2010)
Synthesis of carbon nanotubes and porous
carbons from printed circuit board waste pyrolysis oil
(911-917)
Journal of Hazardous Materials 179 #1-3 (2010)
*******************************************************
Journal of Hazardous Materials 180 #1-3 (2010)
(Titles and Abstracts)
Review
Cr(VI) and Cr(III) removal from aqueous
solution by raw and modified lignocellulosic materials: A review
(1-19)
Journal of Hazardous Materials 180 #1-3 (2010)
Cadmium (II) and lead (II) transport in a
polymer inclusion membrane using tributyl phosphate as mobile carrier and CuFeO2
as a polarized photo electrode
(493-498)
Journal of Hazardous Materials 180 #1-3 (2010)
Adsorption of heavy metals onto activated
carbons derived from polyacrylonitrile fiber
(552-560)
Journal of Hazardous Materials 180 #1-3 (2010)
Recovery of silver (I) using a thiourea-modified
chitosan resin
(577-582)
Journal of Hazardous Materials 180 #1-3 (2010)
Adsorption behaviors of a novel carbonyl and
hydroxyl groups modified hyper-cross-linked poly(styrene-co-divinylbenzene)
resin for β-naphthol from aqueous solution
(634-639)
Journal of Hazardous Materials 180 #1-3 (2010)
Fly ash based geopolymer thin coatings on metal
substrates and its thermal evaluation
(748-752)
Journal of Hazardous Materials 180 #1-3 (2010)
************************************************
Journal of Hazardous Materials 181 #1-3 (2010)
(Titles and Abstracts)
Mechanical and microstructural properties of
alkali-activated fly ash geopolymers
(35-42)
Journal of Hazardous Materials 181 #1-3 (2010)
Preparation of carboxylate-functionalized
cellulose via solvent-free mechanochemistry and its characterization as a
biosorbent for removal of Pb2+ from aqueous solution
(468-473)
Journal of Hazardous Materials 181 #1-3 (2010)
Removal of chromium hexavalent ion from aqueous
solutions using biopolymer chitosan coated with poly 3-methyl thiophene polymer
(474-479)
Journal of Hazardous Materials 181 #1-3 (2010)
Novel spectrophotometric method for the
determination of aluminum in soda drinks packed in cans and plastic bottles
(485-490)
Journal of Hazardous Materials 181 #1-3 (2010)
Enhanced chemical oxygen demand removal and
flux reduction in pulp and paper wastewater treatment using laccase-polymerized
membrane filtration
(763-770)
Journal of Hazardous Materials 181 #1-3 (2010)
Mass balance for POPs in a real scale fluidized
bed combustor co-incinerating automotive shredder residue
(827-835)
Journal of Hazardous Materials 181 #1-3 (2010)
Selective removal for Pb2+ in
aqueous environment by using novel macroreticular PVA beads
(898-907)
Journal of Hazardous Materials 181 #1-3 (2010)
The recovery of zinc from hot galvanizing slag
in an anion-exchange membrane electrolysis reactor
(908-915)
Journal of Hazardous Materials 181 #1-3 (2010)
A novel cellulose–manganese oxide hybrid
material by in situ soft chemical
synthesis and its application for the removal of Pb(II) from water
(986-995)
Journal of Hazardous Materials 181 #1-3 (2010)
Preparation and characterization of flame
retardant n-hexadecane/silicon dioxide
composites as thermal energy storage materials
(1004-1009)
Journal of Hazardous Materials 181 #1-3 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
55.
Journal of Heat Transfer 132 #7 (2010)
(Titles and Abstracts)
Numerical Studies on Microwave Heating of
Thermoplastic-Ceramic Composites Supported on Ceramic Plates
(# 072701)
Journal of Heat Transfer 132 #7 (2010)
Abstract
Reduced Models for Radiative Heat Transfer Analysis Through
Anisotropic Fibrous Medium
(# 072703)
Journal of Heat Transfer 132 #7 (2010)
Abstract
**************************************************
Journal of Heat Transfer 132 #8 (2010)
(Titles and Abstracts)
Analytical Solution for Forced Convection in a Sector Duct
Filled With a Porous Medium
(# 084502)
Journal of Heat Transfer 132 #8 (2010)
Abstract
*************************************************
Journal of Heat Transfer 132 #9 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
56.
Journal of Industrial Textiles 40 #1 (2010)
(Titles and Abstracts)
Properties and Flammability of Electrospun PVA and PVA/Laponite®
Membranes
(33-48)
Journal of Industrial Textiles 40 #1 (2010)
Abstract
Properties of (Ni-P)-ZnO Electroless Nanocoating on PET
Fabrics
(85-96)
Journal of Industrial Textiles 40 #1 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
57.
Journal
of Inorganic and Organometallic Polymers and Materials 20 #2 (2010)
(Titles and Abstracts)
Solid-State Nuclear Magnetic Resonance Spectroscopy: A Review of Modern
Techniques and Applications for Inorganic Polymers
(183-212 )
Journal of Inorganic and Organometallic Polymers and Materials 20 #2 (2010)
Efficient Dispersion of Magnetite Nanoparticles in the Polyurethane Matrix
Through Solution Mixing and Investigation of the Nanocomposite Properties
(213-219)
Journal of Inorganic and Organometallic Polymers and Materials 20 #2 (2010)
A Novel Bimetallic Chain Based on [Mo(CN)8]3− and Yb3+
Ions as Building Blocks in Which Containing Many Intriguing Structural Features
(229-234)
Journal of Inorganic and Organometallic Polymers and Materials 20 #2 (2010)
A Chiral Salen-type Schiff Base Cu2+ Complex for the Vinylic-type
Polymerization of Norbornene
(235-241)
Journal of Inorganic and Organometallic Polymers and Materials 20 #2 (2010)
A Reusable Polymer-Anchored Palladium(II) Schiff Base Complex Catalyst for the
Suzuki Cross-Coupling, Heck and Cyanation Reactions
(264-277)
Journal of Inorganic and Organometallic Polymers and Materials 20 #2 (2010)
Thermal Behaviors of Ferrocenyl-Terminated Hyperbranched Polyester
(278-283)
Journal of Inorganic and Organometallic Polymers and Materials 20 #2 (2010)
Siliconcarbide Embedded Hybrid Nanocomposites as Abrasion Resistant Coating
(284-292)
Journal of Inorganic and Organometallic Polymers and Materials 20 #2 (2010)
Synthesis, Crystal Structure and Luminescence Property of a New (6,3)-Connected
Zn(II) Coordination Polymer
(293-297)
Journal of Inorganic and Organometallic Polymers and Materials 20 #2 (2010)
Copper (II) Ions into Polyphosphazenes: Solid-Like Solution Behavior
(306-312)
Journal of Inorganic and Organometallic Polymers and Materials 20 #2 (2010)
Synthesis, Characterization, Crystal Structures and Thermal and Fluorescence
Studies of Dinuclear and Polymeric Silver(I) Complexes of 5,5-Diethylbarbiturate
with 2,5-Dimethylpyrazine and Piperazine Involving Ag–Ag Interactions
(320-325)
Journal of Inorganic and Organometallic Polymers and Materials 20 #2 (2010)
Synthesis of Water-Soluble Polyesters Containing Carboxy-Functional Groups in
the Polymers Chain and Study of Their Metal Complexes
(343-355)
Journal of Inorganic and Organometallic Polymers and Materials 20 #2 (2010)
Silver(I) Coordination Polymer Based on a Schiff Base Ligand: Synthesis, Crystal
Structure and Luminescent Properties
(356-360)
Journal of Inorganic and Organometallic Polymers and Materials 20 #2 (2010)
Synthesis, Characterization, Conductivity, Band Gap, and Thermal Analysis of
Poly-[(2-mercaptophenyl)iminomethyl]-2-naphthol and Its Polymer–Metal Complexes
(369-379)
Journal of Inorganic and Organometallic Polymers and Materials 20 #2 (2010)
Vacuum-Deposited Thin Film of Aniline–Formaldehyde Condensate/WO3·nH2O
Nanocomposite for NO2 Gas Sensor
(380-386)
Journal of Inorganic and Organometallic Polymers and Materials 20 #2 (2010)
31P MAS NMR Spectroscopy of Hexachlorocyclotriphosphazene at
Different Stages During Thermal Ring-Opening Polymerization
(395-398)
Journal of Inorganic and Organometallic Polymers and Materials 20 #2 (2010)
Hydrothermal Synthesis and Characterization of Trimethyltin(IV) Derivatives with
2-Carboxyethylphosphonic and Benzylphosphonic acid: X-ray Crystal Structures of
2D Network Polymers
(405-410)
Journal of Inorganic and Organometallic Polymers and Materials 20 #2 (2010)
One Dimensional Coordination Polymer of Nickel(II)-Squarate with N,N,N′,N′-tetramethylethylenediamine,
{[Ni(μ-sq)(H2O)2(tmen)]·H2O}n
(411-415)
Journal of Inorganic and Organometallic Polymers and Materials 20 #2 (2010)
Alaa S. Abd-El-Aziz, Charles E. Carraher Jr., Charles U. Pittman Jr., and Martel
Zeldin (Eds.): Macromolecules Containing Metal and Metal-like Elements. Volume
9. Supramolecular and Self-Assembled Metal-Containing Materials
(416-418)
Journal of Inorganic and Organometallic Polymers and Materials 20 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
58.
Journal of Intelligent Materials
Systems and Structures 21 #8 (2010)
(Titles and Abstracts)
No articles selected
***************************************************
Journal of Intelligent Materials
Systems and Structures 21 #9 (2010)
(Titles and Abstracts)
A Brief Review of Stimulus-active Polymers Responsive to
Thermal, Light, Magnetic, Electric, and Water/Solvent Stimuli
(859-885)
Journal of Intelligent Materials Systems and Structures 21 #9 (2010)
Abstract
***********************************************
Journal of Intelligent Materials
Systems and Structures 21 #10 (2010)
(Titles and Abstracts)
No articles selected
**************************************************
Journal of Intelligent Materials
Systems and Structures 21 #11 (2010)
(Titles and Abstracts)
Rheology of Perfluorinated Polyether-based MR Fluids with
Nanoparticles
(1051-1060)
Journal of Intelligent Materials Systems and Structures 21 #11 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
59.
Journal of Laser Applications 22 #1
(2010)
(Titles and Abstracts)
No articles selected
**************************************************
Journal of Laser Applications 22 #2 (2010)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
60.
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #6 (2010)
(Titles and Abstracts) (H)
Radical Copolymerization of Fluorine Ring-Substituted
2-Phenyl-1,1-dicyanoethylenes with 4-Fluorostyrene: Synthesis and
Characterization
(491 – 495)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #6 (2010)
Kinetic Aspects of Styrene Polymerization with an Acyloxyamine
(496 – 502)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #6 (2010)
Syntheses of Poly(butylene succinate) by Means of Non-Toxic Catalysts
(503 – 509)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #6 (2010)
Antimicrobial and DNA Cleavage Studies of New N2O2
Diazadioxa Macrocyclic Schiff Base Co(II), Ni(II) and Cu(II) Complexes
Containing Triazole Head Unit: Synthesis and Spectroscopic Approach
(510 – 520)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #6 (2010)
Synthesis of Novel Semiconducting Aromatic Polyesteramids Containing Pyridine:
Characterization of Nanometer-Sized Rod-Like Analogues and their Copper (II)
Complexes
(521 – 533)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #6 (2010)
Novel Azobenzene-Functionalized Polyelectrolytes of Different Substituted Head
Groups 2: Control of Surface Wetting in Self-Assembled Multilayer Films
(534 – 544)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #6 (2010)
De-acetylated PVA for Pharmaceutical Hydrogel Applications
(545 – 551)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #6 (2010)
Synthesis and Characterization of New Chelating Resin: Adsorption Study of
Copper(II) and Chromium (III) Ions
(552 – 557)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #6 (2010)
Sliding Wear Behavior of Nanoclay Filled Polypropylene/Ultra High Molecular
Weight Polyethylene/Carbon Short Fiber Nanocomposites
(558 – 563)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #6 (2010)
Synthesis and Characterization of Hybrid Biopolymers of L-lactic Acid and
2-Pyrone-4,6-dicarboxylic Acid
(564 – 570)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #6 (2010)
Novel Azobenzene-Functionalized Polyelectrolytes of Different Substituted Head
Groups 3: Control of Properties of Self-Assembled Multilayer Thin Films
(571 – 579)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #6 (2010)
Chitooligosaccharide Copolymers: Synthesis and Aqueous Self-assembly
(580 – 587)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #6 (2010)
Surface Modification of Carbon Nanotube by Poly(ethylene glycol) for the
Preparation of Poly(vinyl alcohol) Nanocomposite
(588 – 594)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #6 (2010)
Effect of pH on Gelation Behavior of Hydrolyzed Polyacrylamide and O-carboxymethyl
Chitosan Mixed System
(595 – 601)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #6 (2010)
Retention Behaviors of Hydrophobically Associating Polyacrylamide Prepared via
Inverse Microemulsion Polymerization Through Porous Media
(602 – 607)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #6 (2010)
Preparation and Characterization of a Novel Drug Delivery System: Biodegradable
Nanoparticles in Thermosensitive Chitosan/Gelatin Blend Hydrogels
(608 – 615)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #6 (2010)
Crosslinked Networks Based on Polysaccharides and Collagen for Pilocarpine
Sustained Release
(616 – 625)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #6 (2010)
Further Studies on the Anionic Copolymerization of Styrene and Glycidyl
Methacrylate in Toluene
(626 – 632)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #6 (2010)
**********************************************
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #7 (2010)
(Titles and Abstracts) (H)
Comparison of Properties and Quartz Crystal Microbalance Measurements of
Poly(2-ethylaniline) in the Presence of Surfactants
(633 – 638)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #7 (2010)
Immobilization of Invertase in a Novel Proton Conducting Poly(vinylphosphonic
acid) – poly(1-vinylimidazole) Network
(639 – 646)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #7 (2010)
Preparation and Characteration of UV-cured EA/MMT Nanocomposites Via In-Situ
Polymerization
(647 – 654)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #7 (2010)
Synthesis of Hydrophobic Polymer Brushes on Silica Nanoparticles Via the
Combination of Surface-Initiated ATRP, ROP and Click Chemistry
(655 – 662)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #7 (2010)
Swelling Behavior of Hydrophobic Association Hydrogels with High Mechanical
Strength
(663 – 670)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #7 (2010)
New Fluorinated Poly(imide siloxane) Random and Block Copolymers with Variation
of Siloxane Loading
(671 – 680)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #7 (2010)
Synthesis and Characterization of Some N-substituted Polypyrrole Derivatives:
Towards Glucose Sensing Electrodes
(681 – 688)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #7 (2010)
Mechanical, Thermal and Morphological Behaviors of Castor Oil Based PU/PS
Interpenetrating Polymer Network-Metakaolin Composites
(689 – 696)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #7 (2010)
Studies on Mechanical and Antithrombogenic Behaviors of Polyvinyl Alcohol and
Gelatin Based Novel Binary Polymer Blends with Grafted Polyacrylamide Chains
(697 – 707)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #7 (2010)
Synthesis and Characterization of Biosuperabsorbent Based on Ovalbumin Protein
(708 – 715)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #7 (2010)
Synthesis and Polymerization Reactions of Cyclic Imino Ethers. 4. Aromatic
Poly(ester amide)s of the AA+BB Type on the Basis of 2-Oxazolines
(716 – 724)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #7 (2010)
Novel Copolymer of Diisopropyl Fumarate and Benzyl Acrylate Synthesized Under
Microwave Energy and Quasielastic Light Scattering Measurements
(725 – 731)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #7 (2010)
Crosslinked Alginate Films as Rate Controlling Membranes for Transdermal Drug
Delivery Application
(732 – 737)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #7 (2010)
*********************************************
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #8 (2010)
(Titles and Abstracts) (H)
Simple Synthesis of α,ω-Diarylpolyynes Part 1: Diphenylpolyynes
(739 – 746)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #8 (2010)
Mathematical Modeling of Acrylonitrile-Butadiene Emulsion Copolymerization:
Model Development and Validation
(747 – 769)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #8 (2010)
Synthesis, Characterization and Aqueous Solution Behavior of a pH-responsive
Double Hydrophilic Block Copolymer
(770 – 776)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #8 (2010)
Thermal Degradation Kinetics of Polyurethane/Organically Modified
Montmorillonite Clay Nanocomposites by TGA
(777 – 783)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #8 (2010)
Polycarbazole Copolymers from 3-(4-Fluorobenzoyl)carbazole and 4,4′-Biphenol via
Combined C-N and C-O Coupling Reactions with Activated Difluorides
(784 – 787)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #8 (2010)
Design and Biocatalytic Synthesis of Pluronics-based Nanomicellar Self-assembly
Systems for Drug Encapsulation Applications
(788 – 793)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #8 (2010)
Characterizations of Thermoplastic Block Elastomers Based on Polybutadiene and ε
-Caprolactone
(794 – 803)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #8 (2010)
Reverse Atom Transfer Radical Polymerization of Acrylonitrile Catalyzed by FeCl3/Lactic
Acid
(804 – 808)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #8 (2010)
Synthesis and Characterization of Polystyrene Possessing Triptycene Units in the
Main Chain by Combination of ATRP and Click Chemistry Processes
(809 – 815)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #8 (2010)
Antimicrobial and DNA Cleavage Studies of New N2O2
Diazadioxa Macrocyclic Schiff Base Co(II), Ni(II) and Cu(II) Complexes
Containing Triazole Head Unit: Synthesis and Spectroscopic Approach
(816 – 827)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #8 (2010)
Synthesis and Characterization of a Novel Curing Agent for Epoxy Resin Based on
Phosphazene Derivatives
(828 – 832)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #8 (2010)
Preparation and Characterization of PVC-based Photoresponsive Polymers
Containing Azo-chromophores
(833 – 838)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #8 (2010)
Investigation of Poly(styrene-alt-maleic anhydride) Copolymer for Controlled
Drug Delivery of Ceftriaxone Antibiotic
(839 – 848)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #8 (2010)
A Facile Approach to Design Plaster of Paris Based Polymer Nanocomposites for
Possible Use as Bone Implants
(849 – 860)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #8 (2010)
Synthesis and Characterization of
Poly[(methylsilyleneethynylenephenyleneethynylene)s-co-decamethylpentasiloxane]
(861 – 866)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #8 (2010)
Preparation and Characterization of Nanocomposite Films from Chitin Whisker and
Waterborne Poly(ester-urethane) With or Without Ultra-Sonification Treatment
(867 – 876)
Journal of
Macromolecular Science Part A - Pure and Applied Chemistry 47 #8 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
61.
Journal
of Macromolecular Science, Part B - Physics
49 #3 (2010)
(Titles and Abstracts)
Crystallization and Rheological Behaviors of Amino-functionalized Multiwalled
Carbon Nanotubes Filled Polyamide 6 Composites
(405 – 418)
Journal
of Macromolecular Science, Part B - Physics
49 #3 (2010)
Synthesis and Structural and Electrical Characteristics of Polypyrrole Nanotube/TiO2
Hybrid Composites
(419 – 428)
Journal
of Macromolecular Science, Part B - Physics
49 #3 (2010)
Effect of Filler Networking on Viscoelastic Properties and Reinforcement of
Natural Rubber Vulcanizates
(429 – 439)
Journal
of Macromolecular Science, Part B - Physics
49 #3 (2010)
Solvent-Induced Crystallization of PS-b-PEO-b-PS Block Copolymer Films
(440 – 453)
Journal
of Macromolecular Science, Part B - Physics
49 #3 (2010)
Vibrational Dynamics of Poly(l-asparagine)
(454 – 469)
Journal
of Macromolecular Science, Part B - Physics
49 #3 (2010)
High-Pressure Analysis of the Multiple Melting Endotherms of Poly(ethylene
succinate) and Poly(butylene succinate)
(470 – 478)
Journal
of Macromolecular Science, Part B - Physics
49 #3 (2010)
Effects of Chlorinated Trans-1,4-polyisoprene on Cure, Morphology, and
Mechanical Properties of Neoprene Blends and Their Vulcanizates
(479 – 486)
Journal
of Macromolecular Science, Part B - Physics
49 #3 (2010)
Coagulation Condition Effects on the Structures and Properties of Dihydroxy
Poly(P-phenylene Benzobisoxazole) (DHPBO) Nascent Fibers Prepared by Dry-Jet
Wet-Spinning Process
(487 – 494)
Journal
of Macromolecular Science, Part B - Physics
49 #3 (2010)
Recovery Process in Stretched Wool Fibers
(495 – 505)
Journal
of Macromolecular Science, Part B - Physics
49 #3 (2010)
Rheology Behavior of Hydrophobically Modified Poly(acrylic acid) with
Twin-Tailed Pendant in Water—Ethylene Glycol Mixture
(506 – 513)
Journal
of Macromolecular Science, Part B - Physics
49 #3 (2010)
Nonisothermal Crystallization Behaviors of Poly(butylene terephthalate)
Nucleated with Elastomer-Modified Nano-SiO2, a Commercial Nucleating
Agent (P250), and Talc
(514 – 527)
Journal
of Macromolecular Science, Part B - Physics
49 #3 (2010)
Dissolution Behavior of Chitin in Ionic Liquids
(528 – 541)
Journal
of Macromolecular Science, Part B - Physics
49 #3 (2010)
Effect of an Ultrahigh Rubber ABS Impact Modifier Resin on Mechanical Properties
of Intumescent Flame-Retardant ABS Composites
(542 – 551)
Journal
of Macromolecular Science, Part B - Physics
49 #3 (2010)
Effect of Temperature on Cononsolvency of Polyvinylpyrrolidone in Water/Methanol
Mixture
(552 – 562)
Journal
of Macromolecular Science, Part B - Physics
49 #3 (2010)
Improving Polarity of UHMWPE Through γ-Ray Irradiation and Its Application
(563 – 573)
Journal
of Macromolecular Science, Part B - Physics
49 #3 (2010)
Morphology and Fracture Toughness of Nanostructured Epoxy Resin Containing
Amino-Terminated Poly(propylene oxide)
(574 – 591)
Journal
of Macromolecular Science, Part B - Physics
49 #3 (2010)
A Model to Study the Behavior of a Polar Polymer in the Mixture of Polar
Solvents
(592 – 601)
Journal
of Macromolecular Science, Part B - Physics
49 #3 (2010)
Loading Rate-Induced Transition in Toughening Mechanism of Rubber-Modified Epoxy
(602 – 614)
Journal
of Macromolecular Science, Part B - Physics
49 #3 (2010)
*****************************************
Journal
of Macromolecular Science, Part B - Physics
49 #4 (2010)
(Titles and Abstracts)
Reactive Compatibilization and Properties of Recycled Poly(ethylene terephthalate)/Poly(615 – 628) Journal of Macromolecular Science, Part B - Physics 49 #4 (2010)
Studies on the Blends of Polyamide66 and Thermoplastic Polyimide
(629 – 639)
Journal
of Macromolecular Science, Part B - Physics
49 #4 (2010)
The Effect of Cooling Mode on Slow Crack Growth Resistance of Polyethylene Pipe
(640 – 651)
Journal
of Macromolecular Science, Part B - Physics
49 #4 (2010)
Preparation and Characterization of Polypyrrole/Ferrospinel Nanocomposite by W/O
Microemulsion Pathway
(652 – 657)
Journal
of Macromolecular Science, Part B - Physics
49 #4 (2010)
Effect of pH and Protein Concentration on Rheological and Structural Behavior of
Temperature-induced Bovine Serum Albumin Gels
(658 – 668)
Journal
of Macromolecular Science, Part B - Physics
49 #4 (2010)
Effect on Structure, Processability, and Conductivity of Poly(m-aminophenol)
of the Initial Acidity/Basicity of the Polymerization Medium
(669 – 679)
Journal
of Macromolecular Science, Part B - Physics
49 #4 (2010)
Preparation and Characterization of Two Types of Cyanate Ester-epoxy Resin
Interpenetrating Network Matrix/Butadiene-acrylonitrile Rubber Composites
(680 – 694)
Journal
of Macromolecular Science, Part B - Physics
49 #4 (2010)
Aggregation Behavior of Copolymer Containing Sulfobetaine Structure in Aqueous
Solution
(695 – 710)
Journal
of Macromolecular Science, Part B - Physics
49 #4 (2010)
Wettability of Polyethylene Micropatterns with Aligned One-Dimensional
Nanostructures
(711 – 722)
Journal
of Macromolecular Science, Part B - Physics
49 #4 (2010)
Microporous Membranes Based on Polyaniline via Thermally Induced Phase
Separation
(723 – 733)
Journal
of Macromolecular Science, Part B - Physics
49 #4 (2010)
Prediction of Heat Conduction with Phase-change Effects during Cooling Stage of
Injection Molding of High-density Polyethylene: Approximate Integral Approach
(734 – 749)
Journal
of Macromolecular Science, Part B - Physics
49 #4 (2010)
Miscibility of Solution Blends of Unsaturated Polyester Resin with Polystyrene
and Polycarbonate
(750 – 756)
Journal
of Macromolecular Science, Part B - Physics
49 #4 (2010)
Toughening Effect of Poly(ethene-co-1-butene)-graft-methyl Methacrylate
and Acrylonitrile on Styrene-acrylonitrile Copolymer (SAN)
(757 – 769)
Journal
of Macromolecular Science, Part B - Physics
49 #4 (2010)
Morphological Change of Aggregates of Polystyrene-block-poly (2-vinyl
pyridine)/HAuCl4 Complexes in Solution
(770 – 780)
Journal
of Macromolecular Science, Part B - Physics
49 #4 (2010)
Fabrication of Degradable Bone-Like Substitutes Based on Poly-L-lactide and β-tricalcium
Phosphate
(781 – 790)
Journal
of Macromolecular Science, Part B - Physics
49 #4 (2010)
Investigation on Tribological Properties of Fluorinated Polyimide
(791 – 801)
Journal
of Macromolecular Science, Part B - Physics
49 #4 (2010)
Preparation and Characterization of Poly(ethylene oxide)/Graphene Nanocomposites
from an Aqueous Medium
( 802 – 809)
Journal
of Macromolecular Science, Part B - Physics
49 #4 (2010)
Step-addition Method for Enhancing the Yield of Gold Nanoparticles in Block
Copolymer Solution
(810 – 820)
Journal
of Macromolecular Science, Part B - Physics
49 #4 (2010)
CO2-induced Crystallization of Isotactic Polypropylene by Annealing
Near Its Melting Temperature
( 821 – 832)
Journal
of Macromolecular Science, Part B - Physics
49 #4 (2010)
Manufacture and Characterization of Poly (butylene terephthalate) Nanofibers by
Electrospinning
( 833 – 842)
Journal
of Macromolecular Science, Part B - Physics
49 #4 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
62.
Journal
of Manufacturing Science and Engineering
132, #3 (2010)
(Titles
and Abstracts)
Development of a Novel Process Chain Based on Atomic Force
Microscopy Scratching for Small and Medium Series Production of Polymer
Nanostructured Components
(# 030901)
Journal of Manufacturing Science and Engineering 132, #3 (2010)
Abstract
Integrated Two-Photon Polymerization With Nanoimprinting for
Direct Digital Nanomanufacturing
(# 030907)
Journal of Manufacturing Science and Engineering 132, #3 (2010)
Abstract
Unusual Applications of Machining: Controlled
Nanostructuring of Materials and Surfaces
(# 030908)
Journal of Manufacturing Science and Engineering 132, #3 (2010)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
63.
Journal
of Material Cycles and Waste Management 12 #2 (2010)
(Titles
and Abstracts)
Efficient chemical recycling of waste fiber-reinforced plastics: use of reduced
amounts of dimethylaminopyridine and activated charcoal for the purification of
recovered monomer
(93-97)
Journal of Material Cycles and Waste Management 12 #2 (2010)
Characteristics of products and PCDD/DF emissions from a pyrolysis process of
urethane/styrofoam waste from electrical home appliances
(98-102)
Journal of Material Cycles and Waste Management 12 #2 (2010)
Debromination of flame-retarded TV housing plastic waste
(103-107)
Journal of Material Cycles and Waste Management 12 #2 (2010)
Study on dechlorination technology for municipal waste plastics containing
polyvinyl chloride and polyethylene terephthalate
(108-122)
Journal of Material Cycles and Waste Management 12 #2 (2010)
Rapid hydropyrolysis of model compounds for epoxy resin oligomers and biomass
tar
(123-127)
Journal of Material Cycles and Waste Management 12 #2 (2010)
Effect of some environmentally degradable materials on the pyrolysis of plastics
II: influence of cellulose and lignin on the pyrolysis of complex mixtures
(147-153)
Journal of Material Cycles and Waste Management 12 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
64.
Journal of Materials Engineering and Performance 19 #4
(2010)
(Titles only)
No articles selected
************************************************
Journal of Materials Engineering and Performance 19 #5
(2010)
(Titles only)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
65.
Journal of Materials Processing Technology 210 #9 (2010)
(Titles and Abstracts)
Visible laser microfabrication of transparent
plastic using Au nanoparticles-dispersed polymer film
(1153-1158)
Journal of Materials Processing Technology 210 #9 (2010)
Method for removing burrs and pits from small
gears using a gear-shaped tool composed of glass-fiber-reinforced plastic
(1159-1170)
Journal of Materials Processing Technology 210 #9 (2010)
******************************************
Journal of Materials Processing Technology 210 #10 (2010)
(Titles and Abstracts)
No articles selected
***********************************************
Journal of Materials Processing Technology 210 #11 (2010)
(Titles and Abstracts)
Experimental and CFD investigation on the
solidification process in a co-rotating twin screw melt conditioner
(1464-1471)
Journal of Materials Processing Technology 210 #11 (2010)
**********************************************
Journal of Materials Processing Technology 210 #12 (2010)
(Titles and Abstracts)
An elevated temperature electrospinning process
for preparing acyclovir-loaded PAN ultrafine fibers
(1551-1555)
Journal of Materials Processing Technology 210 #12 (2010)
A geometrical model of the kinematics of
incremental sheet forming for the prediction of membrane strains and sheet
thickness
(1562-1573)
Journal of Materials Processing Technology 210 #12 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
66.
Journal
of Materials Research
25 #4 (2010)
(Titles
and Abstracts)
Electrochemical synthesis and properties of layer-structured polypyrrole/montmorillonite
nanocomposite films
(658-664)
Journal
of Materials Research
25 #4 (2010)
******************************************
Journal
of Materials Research
25 #5 (2010)
(Titles
and Abstracts)
Fracture-induced formation of parallel silicone strips
(803-809)
Journal
of Materials Research
25 #5 (2010)
Effect of electrospinning parameters on the characterization of PLA/HNT
nanocomposite fibers
(857-865)
Journal
of Materials Research
25 #5 (2010)
*****************************************
Journal
of Materials Research
25 #6 (2010)
(Titles
and Abstracts)
Thermal and mechanical properties of hybrid methylsilsesquioxane/poly(styrene-b-4-vinylpyridine)
low-k dielectrics using a late porogen removal scheme
(1049-1056)
Journal
of Materials Research
25 #6 (2010)
Design of nonaqueous polymer gels with broad temperature performance: Impact of
solvent quality and processing conditions
(1105-1117 )
Journal
of Materials Research
25 #6 (2010)
Comparison of quasistatic to impact mechanical properties of multiwall carbon
nanotube/polycarbonate composites
(1118-1130)
Journal
of Materials Research
25 #6 (2010)
************************************************
Journal
of Materials Research
25 #7 (2010)
(Titles
and Abstracts)
No articles selected
***********************************************
Journal
of Materials Research
25 #8 (2010)
(Titles
and Abstracts)
Batteries and charge storage devices based on electronically conducting polymers
(1561-1574)
Journal
of Materials Research
25 #8 (2010)
Electrospun Teflon AF fibers for superhydrophobic membranes
(1595-1600 )
Journal
of Materials Research
25 #8 (2010)
Electrical transport properties of graphite sheets doped polyvinylidene fluoride
nanocomposites
(1645-1648)
Journal
of Materials Research
25 #8 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
67.
Journal of Materials
Science 45 #13 (2010)
(Titles and Abstracts) (H)
Synthesis and properties of ceramic fibers from
polycarbosilane/polymethylphenylsiloxane polymer blends
(3397-3404)
Journal of Materials Science 45 #13 (2010)
Microwave adsorption of core–shell structure polyaniline/SrFe12O19
composites
(3470-3476)
Journal of Materials Science 45 #13 (2010)
Mechanical properties and oxidation behaviors of carbon/carbon composites with
C–TaC–C multi-interlayer
(3477-3482)
Journal of Materials Science 45 #13 (2010)
Enhancing mechanical and fracture properties of sandwich composites using
nanoparticle reinforcement
(3490-3496)
Journal of Materials Science 45 #13 (2010)
Modeling and prediction of compressive creep of silane-treated TiO2/high-density
polyethylene
(3506-3513)
Journal of Materials Science 45 #13 (2010)
Effects of carbon nanotubes and its functionalization on the thermal and
flammability properties of polypropylene/wood flour composites
(3520-3528)
Journal of Materials Science 45 #13 (2010)
Synthesis and properties of corn zein/montmorillonite nanocomposite films
(3529-3537)
Journal of Materials Science 45 #13 (2010)
Fatigue behaviour in hybrid hollow microspheres/fibre reinforced composites
(3547-3553)
Journal of Materials Science 45 #13 (2010)
The effect of adding organic polymers on the handling properties, strengths and
bioactivity of a Ca–Sr–Zn–Si glass polyalkenoate cement
(3554-3562)
Journal of Materials Science 45 #13 (2010)
Creep of electrical resistance under uniaxial pressures for carbon
black–silicone rubber composite
(3595-3601)
Journal of Materials Science 45 #13 (2010)
An advanced nano-composite cation-exchanger polypyrrole zirconium titanium
phosphate as a Th(IV)-selective potentiometric sensor: preparation,
characterization and its analytical application
(3610-3625)
Journal of Materials Science 45 #13 (2010)
*******************************************
Journal of Materials
Science 45 #14 (2010)
(Titles and Abstracts) (H)
The effect of temperature on fatigue damage of FRP composites
(3757-3767)
Journal of Materials Science 45 #14 (2010)
Ultrasonic evaluation of polyether ether ketone and carbon fiber-reinforced PEEK
(3768-3777)
Journal of Materials Science 45 #14 (2010)
Interfacial adhesion improvement of plain woven carbon fiber reinforced epoxy
filled with micro-fibrillated cellulose by addition liquid rubber
(3841-3850)
Journal of Materials Science 45 #14 (2010)
Poly(anthranilic acid)/multi-walled carbon nanotube composites: spectral,
morphological, and electrical properties
(3858-3865)
Journal of Materials Science 45 #14 (2010)
Particle cavitation in rubber toughened epoxies: the role of particle size
(3882-3894)
Journal of Materials Science 45 #14 (2010)
Regression analysis of manufacturing electrospun nonwoven nanotextiles
(3938-3946)
Journal of Materials Science 45 #14 (2010)
Development of layered porous poly(l-lactide)
for bone regeneration
(3966-3968)
Journal of Materials Science 45 #14 (2010)
******************************************
Journal of Materials
Science 45 #15 (2010)
(Titles and Abstracts) (H)
Hollow polymer microspheres containing a gold nanocolloid core adsorbed on the
inner surface as a catalytic microreactor
(3981-3989)
Journal of Materials Science 45 #15 (2010)
Changes of polyacrylonitrile fiber fine structure during thermal stabilization
(3998-4005)
Journal of Materials Science 45 #15 (2010)
Synthesis and evaluation of a hydrogel that binds glucose and releases
ciprofloxacin
(4006-4012)
Journal of Materials Science 45 #15 (2010)
SC–CO2-assisted rubber dispersion and dynamic vulcanization in
blending of PP/EPDM thermoplastic olefin
(4054-4057)
Journal of Materials Science 45 #15 (2010)
Silicone-modified cellulose. Crosslinking of cellulose acetate with
poly[dimethyl(methyl-H)siloxane] by Pt-catalyzed dehydrogenative coupling
(4141-4150)
Journal of Materials Science 45 #15 (2010)
Effect of nanoclay addition on the displacement-controlled flexural fatigue
behavior of a polymer
(4180-4187)
Journal of Materials Science 45 #15 (2010)
Effects of fiber blending and diamines on wheat gluten materials reinforced with
hemp fiber
(4196-4205)
Journal of Materials Science 45 #15 (2010)
Effect of drawing on the dielectric properties and polarization of pressed
solution cast β-PVDF films
(4206-4215)
Journal of Materials Science 45 #15 (2010)
Nanocrystalline filler induced changes in electrical and stability properties of
a polymer nanocomposite electrolyte based on amorphous matrix
(4236-4250)
Journal of Materials Science 45 #15 (2010)
******************************************
Journal of Materials
Science 45 #16 (2010)
(Titles and Abstracts) (H)
Comparison of shear strength tests on AV119 epoxy-joined ceramics
(4401-4405) Journal
of Materials Science 45 #16 (2010)
Effect of the epoxidized linseed oil concentration as natural plasticizer in
vinyl plastisols
(4406-4413) Journal
of Materials Science 45 #16 (2010)
Structure and properties of cocoons and silk fibers produced by Hyalophora
cecropia
(4414-4421) Journal
of Materials Science 45 #16 (2010)
Organoclay/thermotropic liquid crystalline polymer nanocomposites. Part II:
shear-induced phase separation
(4422-4430) Journal
of Materials Science 45 #16 (2010)
Green and low-cost materials as carbon source for the synthesis of hierarchical
porous carbons
(4439-4443) Journal
of Materials Science 45 #16 (2010)
Characterization of rigid polyurethane foams containing microencapsulated
Rubitherm® RT27. Part I
(4462-4469) Journal
of Materials Science 45 #16 (2010)
Effects of CTAB on porous silica templated by chitosan
(4470-4479) Journal
of Materials Science 45 #16 (2010)
Chemically immobilizing gold nanoparticles to the surface of polystyrene
particles
(4539-4542) Journal
of Materials Science 45 #16 (2010)
******************************************
Journal of Materials
Science 45 #17 (2010)
(Titles and Abstracts) (H)
No articles selected
***********************************************
Journal of Materials
Science 45 #18 (2010)
(Titles and Abstracts) (H)
Environmental green chemistry applications of nanoporous carbons
(4934-4944)
Journal of Materials Science 45 #18 (2010)
Selective removal of hybrid di-block polyelectrolyte multilayers by means of
quaternary ammonium surfactants
(4970-4976)
Journal of Materials Science 45 #18 (2010)
Polyacrylamide and methylcellulose hydrogel as delivery vehicle for the
controlled release of paraquat pesticide
(4977-4985)
Journal of Materials Science 45 #18 (2010)
Magnetic field sensor based on a maghemite/polyaniline hybrid material
(5012-5021)
Journal of Materials Science 45 #18 (2010)
Preparation of conducting polyanilines doped with Keggin-type polyoxometalates
and their application as counter electrode in dye-sensitized solar cells
(5054-5060)
Journal of Materials Science 45 #18 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
68.
Journal of Materials Science: Materials in Electronics 21 #6 (2010)
(Titles and Abstracts)
Synthesis and photoelectric property of poly (3-octylthiophene)/titanium dioxide
nano-composite material
(554-561)
Journal of Materials Science: Materials in Electronics 21 #6 (2010)
Reactive nanolayers for physiologically compatible microsystem packaging
(562-566)
Journal of Materials Science: Materials in Electronics 21 #6 (2010)
Negative differential resistance effects in spun films of substituted
phthalocyanine derivatives
(567-570)
Journal of Materials Science: Materials in Electronics 21 #6 (2010)
Electronic properties of polyaniline doped with dodecylbenzenesulphonic acid (PANI-DBSA)
and poly(methyl methacrylate) (PMMA) blends in the presence of hydroquinone
(603-607)
Journal of Materials Science: Materials in Electronics 21 #6 (2010)
******************************************
Journal of Materials Science: Materials in Electronics 21 #7 (2010)
(Titles and Abstracts)
Optically induced changes of absorption in polymer-dispersed liquid crystals
doped with inorganic nanocrystals
(659-665)
Journal of Materials Science: Materials in Electronics 21 #7 (2010)
In situ 3-hexylthiophene polymerization onto surface of TiO2 based
hybrid solar cells
(682-686)
Journal of Materials Science: Materials in Electronics 21 #7 (2010)
Preparation and characterization of iron phthalocyanine polymer magnetic
materials
(708-712)
Journal of Materials Science: Materials in Electronics 21 #7 (2010)
*******************************************
Journal of Materials Science: Materials in Electronics 21 #8 (2010)
(Titles and Abstracts)
A novel narrow band gap red light-emitting cyanovinylene polymer derived from
3,4-dialkoxy thiophene for optoelectronic applications
(751-757)
Journal of Materials Science: Materials in Electronics 21 #8 (2010)
Optical studies of Au@SnO2/poly-(vinyl) alcohol core-shell
nanoparticle thin films
(758-764)
Journal of Materials Science: Materials in Electronics 21 #8 (2010)
Effect of ultrasonication medium on the properties of copper nanoparticle-filled
epoxy composite for electrical conductive adhesive (ECA) application
(772-778)
Journal of Materials Science: Materials in Electronics 21 #8 (2010)
Substrate influence on the morphological and conductive properties of modified
iron-phthalocyanine thin films
(822-826)
Journal of Materials Science: Materials in Electronics 21 #8 (2010)
******************************************
Journal of Materials Science: Materials in Electronics 21 #9 (2010)
(Titles and Abstracts)
Impact of plasma etching on fabrication technology of liquid crystal polymer
printed circuit board
(954-962) Journal
of Materials Science: Materials in Electronics 21 #9 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
69.
Journal of Materials Science: Materials in Medicine 21 #5 (2010)
(Titles and Abstracts)
The effect of accelerated ageing on performance properties of addition type
silicone biomaterials
(1403-1411)
Journal of Materials Science: Materials in Medicine 21 #5 (2010)
Characterization of commercial rigid polyurethane foams used as bone analogs for
implant testing
(1453-1461)
Journal of Materials Science: Materials in Medicine 21 #5 (2010)
Hydroxyapatite scaffolds processed using a TBA-based freeze-gel casting/polymer
sponge technique
(1495-1502)
Journal of Materials Science: Materials in Medicine 21 #5 (2010)
Preparation and characterization of amphiphilic poly-N-vinylpyrrolidone
nanoparticles containing indomethacin
(1521-1530)
Journal of Materials Science: Materials in Medicine 21 #5 (2010)
The characteristics and transfection efficiency of PEI modified by biodegradable
poly(β-amino ester)
(1543-1551)
Journal of Materials Science: Materials in Medicine 21 #5 (2010)
Transfection efficiency of depolymerized chitosan and epidermal growth factor
conjugated to chitosan–DNA polyplexes
(1553-1561)
Journal of Materials Science: Materials in Medicine 21 #5 (2010)
Control of drug loading efficiency and drug release behavior in preparation of
hydrophilic-drug-containing monodisperse PLGA microspheres
(1563-1571)
Journal of Materials Science: Materials in Medicine 21 #5 (2010)
Investigation on magnetically controlled delivery of doxorubicin from
superparamagnetic nanocarriers of gelatin crosslinked with genipin
(1573-1586)
Journal of Materials Science: Materials in Medicine 21 #5 (2010)
In vitro evaluation of folic acid modified carboxymethyl chitosan nanoparticles
loaded with doxorubicin for targeted delivery
(1587-1597)
Journal of Materials Science: Materials in Medicine 21 #5 (2010)
Alginate-crosslinked chitosan scaffolds as pentoxifylline delivery carriers
(1611-1620)
Journal of Materials Science: Materials in Medicine 21 #5 (2010)
In vitro cytocompatibility evaluation of a thermoresponsive NIPAAm-MMA
copolymeric surface using L929 cells
(1631-1639)
Journal of Materials Science: Materials in Medicine 21 #5 (2010)
Adsorptive properties of albumin, fibrinogen, and γ-globulin on fluorinated
diamond-like carbon films coated on PTFE
(1641-1648)
Journal of Materials Science: Materials in Medicine 21 #5 (2010)
Role of immune cells and inflammatory cytokines in regulation of fibrosis around
silicone expander implants
(1665-1676)
Journal of Materials Science: Materials in Medicine 21 #5 (2010)
Osteoblast response to polymethyl methacrylate bioactive glass composite
(1685-1692)
Journal of Materials Science: Materials in Medicine 21 #5 (2010)
Influence of unsaturated carbonic acids on hemocompatibility and cytotoxicity of
poly-vinylacetate based co-polymers
(1693-1702)
Journal of Materials Science: Materials in Medicine 21 #5 (2010)
Lens epithelial cell response to atmospheric pressure plasma modified
poly(methylmethacrylate) surfaces
(1703-1712)
Journal of Materials Science: Materials in Medicine 21 #5 (2010)
Use of chitosan conduit combined with bone marrow mesenchymal stem cells for
promoting peripheral nerve regeneration
(1713-1720)
Journal of Materials Science: Materials in Medicine 21 #5 (2010)
Chitosan and alginate polyelectrolyte complex membranes and their properties for
wound dressing application
(1751-1759)
Journal of Materials Science: Materials in Medicine 21 #5 (2010)
Novel electrospun polyurethane/gelatin composite meshes for vascular grafts
(1761-1769)
Journal of Materials Science: Materials in Medicine 21 #5 (2010)
*********************************************
Journal of Materials Science: Materials in Medicine 21 #6 (2010)
(Titles and Abstracts)
In situ synthesis of calcium phosphate-polycaprolactone nanocomposites with high
ceramic volume fractions
(1771-1779)
Journal of Materials Science: Materials in Medicine 21 #6 (2010)
From crabshell to chitosan-hydroxyapatite composite material via a biomorphic
mineralization synthesis method
(1781-1787)
Journal of Materials Science: Materials in Medicine 21 #6 (2010)
Effects of sterilisation by high-energy radiation on biomedical
poly-(ε-caprolactone)/hydroxyapatite composites
(1789-1797)
Journal of Materials Science: Materials in Medicine 21 #6 (2010)
A study on mineralization behavior of amino-terminated hyperbranched
polybenzimidazole membranes
(1829-1835)
Journal of Materials Science: Materials in Medicine 21 #6 (2010)
Preparation of porous yttrium oxide microparticles by gelation of ammonium
alginate in aqueous solution containing yttrium ions
(1837-1843)
Journal of Materials Science: Materials in Medicine 21 #6 (2010)
Fabrication and mechanical properties of PLLA/PCL/HA composites via a biomimetic,
dip coating, and hot compression procedure
(1845-1854)
Journal of Materials Science: Materials in Medicine 21 #6 (2010)
Processing and characterization of chitosan microspheres to be used as templates
for layer-by-layer assembly
(1855-1865)
Journal of Materials Science: Materials in Medicine 21 #6 (2010)
The pH-induced thermosensitive poly (NIPAAm-co-AAc-co-HEMA)-g-PCL
micelles used as a drug carrier
(1881-1890)
Journal of Materials Science: Materials in Medicine 21 #6 (2010)
Preparation and characterization of collagen microspheres for sustained release
of VEGF
(1891-1898)
Journal of Materials Science: Materials in Medicine 21 #6 (2010)
Biocompatibility of chemically cross-linked gelatin hydrogels for ophthalmic use
(1899-1911)
Journal of Materials Science: Materials in Medicine 21 #6 (2010)
Electro-spinning of PLGA/PCL blends for tissue engineering and their
biocompatibility
(1969-1978)
Journal of Materials Science: Materials in Medicine 21 #6 (2010)
In vivo study of ethyl-2-cyanoacrylate applied in direct contact with nerves
regenerating in a novel nerve-guide
(1979-1987)
Journal of Materials Science: Materials in Medicine 21 #6 (2010)
Effect of biomaterial design criteria on the performance of surgical meshes for
abdominal hernia repair: a pre-clinical evaluation in a chronic rat model
(1989-1995)
Journal of Materials Science: Materials in Medicine 21 #6 (2010)
*******************************************
Journal of Materials Science: Materials in Medicine 21 #7 (2010)
(Titles and Abstracts)
Novel mucoadhesive system based on sulfhydryl-acrylate interactions
(2027-2034)
Journal of Materials Science: Materials in Medicine 21 #7 (2010)
Synthesis, extrusion and rheological behaviour of PU/HA composites for
biomedical applications
(2057-2066)
Journal of Materials Science: Materials in Medicine 21 #7 (2010)
Evaluation of the stress distribution in CFR-PEEK dental implants by the
three-dimensional finite element method
(2079-2085)
Journal of Materials Science: Materials in Medicine 21 #7 (2010)
Developing an engineered antimicrobial/prophylactic system using electrically
activated bactericidal metals
(2103-2114)
Journal of Materials Science: Materials in Medicine 21 #7 (2010)
Fiber scaffolds of polysialic acid via electrospinning for peripheral nerve
regeneration
(2115-2124)
Journal of Materials Science: Materials in Medicine 21 #7 (2010)
Preparation of a novel biodegradable nanocomposite scaffold based on poly
(3-hydroxybutyrate)/bioglass nanoparticles for bone tissue engineering
(2125-2132)
Journal of Materials Science: Materials in Medicine 21 #7 (2010)
Acyl modified chitosan derivatives for oral delivery of insulin and curcumin
(2133-2140)
Journal of Materials Science: Materials in Medicine 21 #7 (2010)
Novel composites materials from functionalized polymers and silver coated
titanium oxide capable for calcium phosphate induction, control of orthopedic
biofilm infections: an “in vitro” study
(2201-2211)
Journal of Materials Science: Materials in Medicine 21 #7 (2010)
Friction transfer of polytetrafluoroethylene (PTFE) to produce nanoscale
features and influence cellular response in vitro
(2213-2226)
Journal of Materials Science: Materials in Medicine 21 #7 (2010)
Physical, antibacterial and antioxidant properties of chitosan films
incorporated with thyme oil for potential wound healing applications
(2227-2236)
Journal of Materials Science: Materials in Medicine 21 #7 (2010)
Characterisation of physico-mechanical properties and degradation potential of
calcium alginate beads for use in embolisation
(2243-2251)
Journal of Materials Science: Materials in Medicine 21 #7 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
70.
Journal
of Mechanics and Physics of Solids
58 #6 (2010)
(Titles and Abstracts)
No articles selected
***********************************************
Journal
of Mechanics and Physics of Solids
58 #7 (2010)
(Titles and Abstracts)
Swelling instability of surface-attached gels
as a model of soft tissue growth under geometric constraints
(935-954)
Journal
of Mechanics and Physics of Solids
58 #7 (2010)
************************************************
Journal
of Mechanics and Physics of Solids
58 #8 (2010)
(Titles and Abstracts)
Thermally actuated shape-memory polymers:
Experiments, theory, and numerical simulations
(1100-1124)
Journal
of Mechanics and Physics of Solids
58 #8 (2010)
Influence of local wrinkling on membrane
behaviour: A new approach by the technique of slowly variable Fourier
coefficients
(1139-1153)
Journal
of Mechanics and Physics of Solids
58 #8 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Roger D.
Corneliussen
Editor
Telephone: 610 883 0055
rcorneliussen@4spe.org
www.maropolymeronline.com
***********************************
Copyright 2010 by Roger D. Corneliussen.
No part of this transmission is to be duplicated in any manner or forwarded by electronic mail without the express written
permission of Roger D. Corneliussen
**************************************