Maro Publications
Maro Publications
Week 47 (11/21 thorough 11/25)
Copyright 2011 by Roger D. Corneliussen
Below are links to the new articles by journals. A click should take you to the journal website. This is a great variation in where one ends up. In some cases, a click will take you to the issue in other cases a click will take you to the website and you must do a few more clicks to get to the issue. This is controlled by the publisher and not Maro. Fortunately, with a little practice, this should not be a serious problem. (RDC)
All 2011 Entries are listed in
2011 Maro Links
All 2010 Entries are listed in
2010 Maro Links
All 2009 Entries are listed in
2009 Maro Links
All 2008 Entries are listed in
2008 Maro Links
Polymer
Track (News)
Updated daily
Week 47 (11/21-11/25)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
01.
Advanced
Composite Materials
20, #6 (2011)
(Titles
and Abstracts
A Numerical Approach for Injection Molding of Short-Fiber-Reinforced Plastics
Using a Particle Method
(503-517)
Advanced Composite Materials 20, #6 (2011)
Strength Prediction Method for Unidirectional GFRP after Hydrothermal Aging
(519-535)
Advanced Composite Materials 20, #6 (2011)
Simplified Predictive Method of Viscosity of Nanofiber-Dispersed Polymer
Suspensions
(537-546)
Advanced Composite Materials 20, #6 (2011)
Flexural Behavior of Full-Scale Composite Structural Insulated Floor Panels
(547-567)
Advanced Composite Materials 20, #6 (2011)
Damage Growth Analysis in Particle-Reinforced Composite Using Cohesive Element
(569-583)
Advanced Composite Materials 20, #6 (2011)
Novel Approach on Characterization of Inter-laminar Failure in Glass Fiber
Reinforced Composite
(585-609)
Advanced Composite Materials 20, #6 (2011)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
02.
Advances in Colloid and Interface Science 169 #2 (2011)
(Titles and Abstracts)
Green synthesis of biogenic metal nanoparticles by terrestrial and aquatic
phototrophic and heterotrophic eukaryotes and biocompatible agents
(59-79)
Advances in Colloid and Interface Science 169 #2 (2011)
Mimicking natural superhydrophobic surfaces and grasping the wetting process:
A review on recent progress in preparing superhydrophobic surfaces
(80-105)
Advances in Colloid and Interface Science 169 #2 (2011)
Heavy Crude Oils/Particle Stabilized Emulsions
(106-127)
Advances in Colloid and Interface Science 169 #2 (2011)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
03.
Colloid and Polymer Science 289 #17-18 (2011)
(Titles and Abstracts)
Intrinsic interaction mode of an inhalation anesthetic with globular proteins: a
comparative study on ligand recognition
(1785-1797)
Colloid and Polymer Science 289 #17-18 (2011)
Colloidal crystallization of thermo-sensitive gel spheres of poly (N-isopropyl
acrylamide). Influence of degree of cross-linking of the gels
(1799-1808)
Colloid and Polymer Science 289 #17-18 (2011)
Preparations and properties of waterborne polyurethane/allyl
isocyanated-modified graphene oxide nanocomposites
(1809-1814)
Colloid and Polymer Science 289 #17-18 (2011)
Dispersion of multiwalled carbon nanotubes (MWCNTs) by ionic liquid-based Gemini
pyrrolidinium surfactants in aqueous solution
(1815-1819)
Colloid and Polymer Science 289 #17-18 (2011)
Turbulent drag reduction characteristics of poly(acrylamide-co-acrylic acid) in
a rotating disk apparatus
(1821-1827)
Colloid and Polymer Science 289 #17-18 (2011)
Nanowires of 3-D cross-linked gold nanoparticle assemblies behave as
thermosensors on silicon substrates
(1829-1837)
Colloid and Polymer Science 289 #17-18 (2011)
Synthesis and characterization of PVA ferrogels obtained through a one-pot
freezingthawing procedure
(1839-1846)
Colloid and Polymer Science 289 #17-18 (2011)
Interdiffusion of polymers with glassy bulk
(1847-1854)
Colloid and Polymer Science 289 #17-18 (2011)
Controlled fabrication of organic nanotubes via self-assembly of non-symmetric
bis-acylurea
(1855-1862)
Colloid and Polymer Science 289 #17-18 (2011)
Synthesis and characterization of
polystyrene/2-(5-chloro-2H-benzotriazole-2-yl)-6-(1,1- dimethylethyl)-4-methyl-phenol
composite microspheres of narrow size distribution for UV irradiation protection
(1863-1874)
Colloid and Polymer Science 289 #17-18 (2011)
Preparation of solgel hybrid materials from γ-methacryloxypropyltrimethoxysilane
and tetramethyl orthosilicate: study of the hydrolysis and condensation
reactions
(1875-1883)
Colloid and Polymer Science 289 #17-18 (2011)
Silica nanoparticle covered with mixed polymer brushes as Janus particles at
water/oil interface
(1885-1894)
Colloid and Polymer Science 289 #17-18 (2011)
The effect of anisometry of dispersed droplets on their coalescence during
annealing of polymer blends
(1895-1903)
Colloid and Polymer Science 289 #17-18 (2011)
Adsorption kinetics under the influence of barriers at the subsurface layer
(1905-1915)
Colloid and Polymer Science 289 #17-18 (2011)
Thermoreversible UCST-type phase behavior of comb-like poly(N-phenyl
maleimide-co-n-octadecyl vinyl ether) in organic media
(1917-1925)
Colloid and Polymer Science 289 #17-18 (2011)
A dynamic study on nonlinear viscoelastic behavior of isotactic
polypropylene/carbon black composite melts
(1927-1931)
Colloid and Polymer Science 289 #17-18 (2011)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
04.
Fire
and Materials 35 #8 (2011)
(Titles and Abstracts) S
Full-scale study on combustion characteristics of an upholstered chair under
different boundary conditionsPart 2: Ignition at the backrest top
(539551)
Fire and Materials 35 #8 (2011)
Comparison of thermal protective performance of aluminized fabrics of basalt
fiber and glass fiber
(553560)
Fire and Materials 35 #8 (2011)
Thermal degradation and fire performance of wood treated with various inorganic
salts
(569576)
Fire and Materials 35 #8 (2011)
Effect of increased charring on the narrow side of rectangular timber
cross-sections exposed to fire on three or four sides
(593605)
Fire and Materials 35 #8 (2011)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
05.
High Performance
Polymers 23 #7 (2011)
(Titles and Abstracts)
A facile process for preparation of polyaniline/polyacrylic
acid composite electrochromism films
(489-493)
High Performance Polymers 23 #7 (2011)
Abstract
Synthesis and characterization of new organosoluble aromatic
polyamides and polyazomethines containing pendent pentadecyl chains
(494-505)
High Performance Polymers 23 #7 (2011)
Abstract
Synthesis and properties of novel poly(ether ether ketone)
copolymers with (3,5-ditrifluoromethyl)phenyl and (4-phenoxy)phenyl side groups
(506-512)
High Performance Polymers 23 #7 (2011)
Abstract
Synthesis and thermal stability studies of polyaniline/silver
nanocomposite based on reduction of silver ions using polyaniline
(513-517)
High Performance Polymers 23 #7 (2011)
Abstract
Organicinorganic nanocomposites for shape memory effects
(518-525)
High Performance Polymers 23 #7 (2011)
Abstract
Organoclay-reinforced polyethersulfone-modified epoxy-based
hybrid nanocomposites
(526-534)
High Performance Polymers 23 #7 (2011)
Abstract
Synthesis, deblocking and cure reaction studies of secondary
alcohol-blocked isocyanates
(535-541)
High Performance Polymers 23 #7 (2011)
Abstract
Synthesis and evaluation of properties of novel aromatic
poly(ether-imide) with benzazole pendent groups and flexible ether linkages
(542-554)
High Performance Polymers 23 #7 (2011)
Abstract
A study on the characterization of FEP-g-PVBSA membranes as
polymer electrolytes for direct methanol fuel cells
(555-560)
High Performance Polymers 23 #7 (2011)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
06.
Journal
of Elastomers and Plastics 43 #6 (2011)
(Titles and Abstracts)
Characterization of Modified Bagasse and Investigation
Properties of Its Novel Composite
(513-528)
Journal of Elastomers and Plastics 43 #6 (2011)
Abstract
Influence of Glycols on the Glycolysis Process and the
Structure and Properties of Polyurethane Elastomers
(529-541)
Journal of Elastomers and Plastics 43 #6 (2011)
Abstract
Effect of Functionalized MWCNTs with Surfactant and Coupling
Agent on Properties of LDPE/POE Blends
(543-558)
Journal of Elastomers and Plastics 43 #6 (2011)
Abstract
Molecular Dynamics of Linear and Crosslinked Polyester
Urethanes Studied by Dielectric Spectroscopy
(559-576)
Journal of Elastomers and Plastics 43 #6 (2011)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
07.
Journal of Polymers and the Environment
19 #3 (2011)
(Titles and Abstracts)
Novative Biomaterials Based on Chitosan and Poly(ε-Caprolactone): Elaboration of
Porous Structures
(819-826)
Journal of Polymers and the Environment 19 #3 (2011)
Gene Cloning and Characterization of a Poly(l-Lactic Acid) Depolymerase from
Pseudomonas sp. Strain DS04-T
(827-833)
Journal of Polymers and the Environment 19 #3 (2011)
Morphology of Penicillium funiculosum During Biodegradation of Poly
(β-hydroxybutyrate-co-β-hydroxyvalerate) [PHBV] with Poly (ε-Caprolactone) [PCL]
Blends
(834-840)
Journal of Polymers and the Environment 19 #3 (2011)
Effects of Incorporating Polycaprolactone and Flax Fiber into
Glycerol-Plasticized Pea Starch
(841-848)
Journal of Polymers and the Environment 19 #3 (2011)
Polylactic Acid Composites Utilising Sequential Surface Treatments of
Lignocellulose: Chemistry, Morphology and Properties
(849-862)
Journal of Polymers and the Environment 19 #3 (2011)
Aging of Toughened Polylactic Acid Nanocomposites: Water Absorption,
Hygrothermal Degradation and Soil Burial Analysis
(863-875)
Journal of Polymers and the Environment 19 #3 (2011)
A Novel Affinity Chromatographic Material for the Purification of Extracellular
Polyhydroxybutyrate Depolymerases
(876-886)
Journal of Polymers and the Environment 19 #3 (2011)
Experimental Processing of Biodegradable Drip Irrigation SystemsPossibilities
and Limitations
(887-907)
Journal of Polymers and the Environment 19 #3 (2011)
Effects of Filler Content and Compatibilizing Agents on Mechanical Behavior of
the Particle-Reinforced Composites
(908-911)
Journal of Polymers and the Environment 19 #3 (2011)
Effect of Glycerin and Starch Crosslinking on Molecular Compatibility of
Biodegradable Poly(lactic acid)-Starch Composites
(912-917)
Journal of Polymers and the Environment 19 #3 (2011)
Biodegradation of γ Irradiated Poly 3-hydroxybutyrate (PHB) Films Blended with
Poly(Ethyleneglycol)
(918-925)
Journal of Polymers and the Environment 19 #3 (2011)
Synthesis and Properties of N-Maleyl Chitosan-Cross-Linked Poly(Acrylic
Acid-co-Acrylamide) Superabsorbents
(926-934)
Journal of Polymers and the Environment 19 #3 (2011)
Production and Rheological Studies of Microalgal Extracellular Biopolymer from
Lactose Using the Green Alga Neochloris oleoabundans
(935-942)
Journal of Polymers and the Environment 19 #3 (2011)
A Study on Functionalization of Waste Tire Rubber Powder Through Ozonization
(943-949)
Journal of Polymers and the Environment 19 #3 (2011)
The Effect of CTBN Concentrations on the Kinetic Parameters of Decomposition of
Blends of Epoxy Resins Modified with Carboxyl-Terminated Liquid Copolymer
(950-956)
Journal of Polymers and the Environment 19 #3 (2011)
Recycled Polyethylene Composites Reinforced with Jute Fabric from Sackcloth:
Part II-Impact Strength Evaluation
(957-965)
Journal of Polymers and the Environment 19 #3 (2011)
Photocatalytic Degradation of Poly(Vinyl Alcohol) on Pt/TiO2 with Fenton Reagent
(966-970)
Journal of Polymers and the Environment 19 #3 (2011)
Isolation and Characterization of Recovered Starch from Industrial Wastewater
(971-979)
Journal of Polymers and the Environment 19 #3 (2011)
Preparation and Properties of Starch/Nanosilicate Layer/Polycaprolactone
Composites
(980-987)
Journal of Polymers and the Environment 19 #3 (2011)
Bioplastic Wastes: The Best Final Disposition for Energy Saving
(988-994)
Journal of Polymers and the Environment 19 #3 (2011)
Dissolving Feather Keratin Using Sodium Sulfide for Bio-Polymer Applications
(995-1004)
Journal of Polymers and the Environment 19 #3 (2011)
Eco-Synthesis of PVA/Chitosan Hydrogels for Biomedical Application
(1005-1012)
Journal of Polymers and the Environment 19 #3 (2011)
Preparation and Characterization of Gamma Irradiated Sugar Containing
Starch/Poly (Vinyl Alcohol)-Based Blend Films
(1013-1022)
Journal of Polymers and the Environment 19 #3 (2011)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
08.
Journal of
Reinforced Plastics and Composites 30 #13 (2011)
(Titles and Abstracts)
Effects of types of fillers and filler loading on the
properties of silicone rubber composites
(1087-1096)
Journal of Reinforced Plastics and Composites 30 #13 (2011)
Abstract
Effect of ply-thickness on impact damage morphology in CFRP
laminates
(1097-1106)
Journal of Reinforced Plastics and Composites 30 #13 (2011)
Abstract
Influence of the impact velocity on the perforation
resistance of a glass-reinforced polypropylene material
(1107-1114)
Journal of Reinforced Plastics and Composites 30 #13 (2011)
Abstract
Influence of chemical foaming agent on the physical,
mechanical, and morphological properties of HDPE/wood flour/nanoclay composites
(1115-1124)
Journal of Reinforced Plastics and Composites 30 #13 (2011)
Abstract
Study of composite beams in asymmetric four-point bending
(1125-1137)
Journal of Reinforced Plastics and Composites 30 #13 (2011)
Abstract
Shear strengthening of RC T-beams with externally side
bonded GFRP sheet
(1139-1154)
Journal of Reinforced Plastics and Composites 30 #13 (2011)
Abstract
Structure and properties of polyacrylic acid modified
hydroxyapatite/liquid crystal polymer composite
(1155-1163)
Journal of Reinforced Plastics and Composites 30 #13 (2011)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
09.
Journal of Vinyl and Additive Technology 17, #4 (2011)
(Titles and Abstracts)
Effects of processing on the structure of PVC/montmorillonite composites. I.
Melt and solution processes
(231238) Journal
of Vinyl and Additive Technology 17, #4 (2011)
Thermal and structural effects of poly(vinyl chloride)/(wood flour) compound
gelation in the Brabender mixer
(239244) Journal
of Vinyl and Additive Technology 17, #4 (2011)
Polypropylene/(waste tire dust)/(short glass fiber composites): Effects of
silane coupling agent and dynamic vulcanization
(245253) Journal
of Vinyl and Additive Technology 17, #4 (2011)
Influence of compatibilizers and processing temperature on microcellular
injection-molded polypropylene/(waste tire powder) composites
(254259) Journal
of Vinyl and Additive Technology 17, #4 (2011)
Effect of maleic-anhydride-grafted polypropylene as a compatibilizer on the
properties of polypropylene/(modified carbon black) composites
(260264) Journal
of Vinyl and Additive Technology 17, #4 (2011)
Salep-g-poly(sodium acrylate)/alumina superabsorbent hydrogel composite as a
smart material: Irradiation synthesis and investigation of its swelling behavior
(265273) Journal
of Vinyl and Additive Technology 17, #4 (2011)
Effects of various surfactants and solutions on the morphology of polyaniline
composite and nanocomposite
(274280) Journal
of Vinyl and Additive Technology 17, #4 (2011)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
10.
Macromolecular Reaction Engineering 5 #11-12 (2011)
(Titles and Abstracts)
A Continuous-Flow Polymerization Microprocess with Online GPC and Inline Polymer
Recovery by Micromixer-Assisted Nanoprecipitation
(542547)
Macromolecular Reaction Engineering 5 #11-12 (2011)
Simultaneous Deconvolution of Molecular Weight and Chemical Composition
Distribution of Ethylene/1-Olefin Copolymers: Strategy Validation and Comparison
(549562)
Macromolecular Reaction Engineering 5 #11-12 (2011)
Thermodynamic Data of EthylenePropane Mixtures in Condensed and Supercritical
State
(563574)
Macromolecular Reaction Engineering 5 #11-12 (2011)
Nitroxide-Mediated Polymerization of an Organo-Soluble Protected Styrene
Sulfonate: Development of Homo- and Random Copolymers
(575586)
Macromolecular Reaction Engineering 5 #11-12 (2011)
The Integrated Deconvolution Estimation Model: Estimation of Reactivity Ratios
per Site Type for Ethylene/1-Butene Copolymers Made with a Heterogeneous
Ziegler-Natta Catalyst
(587598)
Macromolecular Reaction Engineering 5 #11-12 (2011)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
11.
Nanotechnology 22 #49 (2011)
(Titles and Abstracts; Full PDF versions of Articles are available free
for 30 days after publication)
Principles of conjugating quantum dots to proteins via carbodiimide chemistry
(#494006)
Nanotechnology 22 #49 (2011)
....................................................................................................
Nanotechnology 22 #50 (2011)
(Titles and Abstracts; Full PDF versions of Articles are available free
for 30 days after publication)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
12.
Plastics Europe #11 (2011) English version of Kunststoffe
(Titles and Abstracts) Some, not all, articles are available without
charge
Trade Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
13.
Polymers for Advanced Technologies 22 #12 (2011)
(Titles and Abstracts)
Effect of nano-polystyrene (nPS) on thermal, rheological, and mechanical
properties of polypropylene (PP)
(15471554)
Polymers for Advanced Technologies 22 #12 (2011)
Preparation of monodisperse poly(St-co-PETEA) microspheres by precipitation
polymerization using ethanol as solvent
(15551562)
Polymers for Advanced Technologies 22 #12 (2011)
PA66/PA12/clay based nanocomposites: morphology and physical properties
(15631571)
Polymers for Advanced Technologies 22 #12 (2011)
Preparation and properties of new high performance maleimide-triazine resins for
resin transfer molding
(15721580)
Polymers for Advanced Technologies 22 #12 (2011)
Layered silicate epoxy nanocomposites: formation of the inorganic-carbonaceous
fire protection layer
(15811592)
Polymers for Advanced Technologies 22 #12 (2011)
Novel synthesis of polymer and copolymer nanoparticles by atomized microemulsion
technique and its characterization
(15931601)
Polymers for Advanced Technologies 22 #12 (2011)
Preparation, swelling, and stimuli-responsive characteristics of superabsorbent
nanocomposites based on carboxymethyl cellulose and rectorite
(16021611)
Polymers for Advanced Technologies 22 #12 (2011)
Effect of elongational flow on morphology and properties of polymer/CNTs
nanocomposite fibers
(16121619)
Polymers for Advanced Technologies 22 #12 (2011)
Synthesis of waterborne nanopolyanilne latexes and application of
nanopolyaniline particles in epoxy paint formulation for smart corrosion
resistivity of carbon steel
(16201627)
Polymers for Advanced Technologies 22 #12 (2011)
Synergistic effect of boron containing substances on flame retardancy and
thermal stability of clay containing intumescent polypropylene nanoclay
composites
(16281632)
Polymers for Advanced Technologies 22 #12 (2011)
Biodegradable PEO/cellulose-based solidsolid phase change materials
(16331641)
Polymers for Advanced Technologies 22 #12 (2011)
Influence of low multi-walled carbon nanotubes loadings on the crystallization
behavior of biodegradable poly(butylene succinate) nanocomposites
(16421649)
Polymers for Advanced Technologies 22 #12 (2011)
Electrochemical impedance characterization and photovoltaic performance of N719
dye-sensitized solar cells using quaternized ammonium iodide containing
polyfluorene electrolyte solutions
(16501657)
Polymers for Advanced Technologies 22 #12 (2011)
Effect of blending ratio and oligomer structure on the thermal transitions of
stereocomplexes consisting of a D-lactic acid oligomer and poly(L-lactide)
(16581664)
Polymers for Advanced Technologies 22 #12 (2011)
Synthesis and electro-optical characterization of new conducting
PEDOT/Au-nanorods nanocomposites
(16651672)
Polymers for Advanced Technologies 22 #12 (2011)
Synthesis and photoinitiating behavior of hyperbranched polymeric
photoinitiators bearing coinitiator amine
(16731680)
Polymers for Advanced Technologies 22 #12 (2011)
CS-Fe(II,III) complex as precursor for magnetite nanocrystal
(16811684)
Polymers for Advanced Technologies 22 #12 (2011)
Gel strength and swelling of acrylamide-protic acid superabsorbent copolymers
(16851695)
Polymers for Advanced Technologies 22 #12 (2011)
Network parameters of poly(N-isopropylacrylamide)/montmorillonite hydrogels:
effects of accelerator and clay content
(16961704)
Polymers for Advanced Technologies 22 #12 (2011)
Synthesis of hydrophilic microspheres with LCST close to body temperature for
controlled dual-sensitive drug release
(17051712)
Polymers for Advanced Technologies 22 #12 (2011)
Effect of magnesium dihydroxide nanoparticles on thermal degradation and flame
resistance of PMMA nanocomposites
(17131719)
Polymers for Advanced Technologies 22 #12 (2011)
Evolution of the precipitation kinetics, morphologies, permeation performances,
and crystallization behaviors of polyvinylidenefluoride (PVDF) hollow fiber
membrane by adding different molecular weight polyvinylpyrrolidone (PVP)
(17201730)
Polymers for Advanced Technologies 22 #12 (2011)
Preparation of high performance foams with excellent dielectric property based
on toughened bismaleimide resin
(17311737)
Polymers for Advanced Technologies 22 #12 (2011)
Preparation and properties of polysiloxane grafting multi-walled carbon
nanotubes/polycarbonate nanocomposites
(17381746)
Polymers for Advanced Technologies 22 #12 (2011)
Sulfonated carbon nanotubes/sulfonated poly(ether sulfone ether ketone ketone)
composites for polymer electrolyte membranes
(17471752)
Polymers for Advanced Technologies 22 #12 (2011)
Characterization of polyether-poly(methyl methacrylate)-lithium perchlorate
blend electrolytes
(17531759)
Polymers for Advanced Technologies 22 #12 (2011)
Poly(PEGDMA-MAA) copolymeric micro and nanoparticles for oral insulin delivery
(17601767)
Polymers for Advanced Technologies 22 #12 (2011)
The synthesis and properties of a reactive flame-retardant unsaturated polyester
resin from a phosphorus-containing diacid
(17681777)
Polymers for Advanced Technologies 22 #12 (2011)
Preparation and properties of water-absorbent composites of chloroprene rubber,
starch, and sodium acrylate
(17781785)
Polymers for Advanced Technologies 22 #12 (2011)
Effect of PEO-PPO-PEO copolymer on the mechanical and thermal properties and
morphological behavior of biodegradable poly (L-lactic acid) (PLLA) and poly
(butylene succinate-co-L-lactate) (PBSL) blends
(17861793)
Polymers for Advanced Technologies 22 #12 (2011)
Polysulfobetaines as extractants for Sr(II) ions from its aqueous solutions
(17941801)
Polymers for Advanced Technologies 22 #12 (2011)
Polymer nanoparticles: their effect on rheological, thermal, and mechanical
properties of linear low-density polyethylene (LLDPE)
(18021811)
Polymers for Advanced Technologies 22 #12 (2011)
Quasi-solid-state dye-sensitized solar cells containing P (MMA-co-AN)-based
polymeric gel electrolyte
(18121815)
Polymers for Advanced Technologies 22 #12 (2011)
Novel fluorinated polyimides derived from an unsymmetrical diamine containing
trifluoromethyl and methyl pendant groups
(18161823)
Polymers for Advanced Technologies 22 #12 (2011)
Preparation of gel-silica/ammonium polyphosphate core-shell flame retardant and
properties of polyurethane composites
(18241831)
Polymers for Advanced Technologies 22 #12 (2011)
Electrospun poly(ε-caprolactone)-based composites using synthesized β-tricalcium
phosphate
(18321841)
Polymers for Advanced Technologies 22 #12 (2011)
Biodegradable ultrafine fibers with coresheath structures for protein delivery
and its optimization
(18421850)
Polymers for Advanced Technologies 22 #12 (2011)
Effects of different types of polyethylene on the morphology and properties of
recycled poly(ethylene terephthalate)/polyethylene compatibilized blends
(18511858)
Polymers for Advanced Technologies 22 #12 (2011)
Preparation, combustion, and thermal behavior of UV-cured epoxy-based coatings
containing layered double hydroxide
(18591864)
Polymers for Advanced Technologies 22 #12 (2011)
Studies on the feasibility of recycled polystyrene doped with NLO active
meta-Nitroaniline for optoelectronics applications
(18651871)
Polymers for Advanced Technologies 22 #12 (2011)
The effect of covalent immobilization of sialic acid on the removal of
lipopolysaccharide and reactive oxygen species for polyethylene terephthalate
(18721878)
Polymers for Advanced Technologies 22 #12 (2011)
Application of hydrophobically modified water-soluble polyacrylamide conjugated
with poly(oxyethylene)-co-poly(oxypropylene) surfactant as emulsifier
(18791887)
Polymers for Advanced Technologies 22 #12 (2011)
Radiation effects on styrenebutadieneethylenepropylene diene monomer-multiple
walled carbon nanotube nanocomposites: vulcanization and characterization
(18881897)
Polymers for Advanced Technologies 22 #12 (2011)
Synthesis of high oil-absorption resins of poly(methyl methacrylate-butyl
methacrylate) by suspended emulsion polymerization
(18981904)
Polymers for Advanced Technologies 22 #12 (2011)
Synthesis and thermal properties of antimony doped tin oxide/waterborne
polyurethane nanocomposite films as heat insulating materials
(19051911)
Polymers for Advanced Technologies 22 #12 (2011)
Mechanical and thermal properties of attapulgite clay reinforced
polymethylmethacrylate nanocomposites
(19121918)
Polymers for Advanced Technologies 22 #12 (2011)
Effect of polymerically-modified clay structure on the morphology and properties
of UV-cured polyurethane acrylate/clay nanocomposites
(19191924)
Polymers for Advanced Technologies 22 #12 (2011)
Synthesis and properties of Polycaprolactone-graft-poly(2-(dimethylamino)ethyl
methacrylate-co-methoxy polyethylene glycol monomethacrylate) as non-viral gene
vector
(19251930)
Polymers for Advanced Technologies 22 #12 (2011)
Impact of modified alumina oxides on the fire properties of PMMA and PS
nanocomposites
(19311939)
Polymers for Advanced Technologies 22 #12 (2011)
Synthesis, characterization of naphthalene-based polyimides, and their use as
immobilized enzyme membrane
(19401947)
Polymers for Advanced Technologies 22 #12 (2011)
Grafting of regenerated cellulose membrane by surface-initiated atom transfer
radical polymerization and its pH-resposive behavior
(19481952)
Polymers for Advanced Technologies 22 #12 (2011)
Phenol side-groups-containing fluorene polymer synthesized by catalytic
oxidative polymerization
(19531958)
Polymers for Advanced Technologies 22 #12 (2011)
Crystallization, rheological, and mechanical properties of PLLA/PEG blend with
multiwalled carbon nanotubes
(19591970)
Polymers for Advanced Technologies 22 #12 (2011)
An improvement on the adhesion-strength of laminated ultra-high-molecular-weight
polyethylene fabrics: surface-etching/modification using highly effective
helium/oxygen/nitrogen plasma treatment
(19711981)
Polymers for Advanced Technologies 22 #12 (2011)
Synthesis of functionalized conducting polymer polyanthranilic acid using
various oxidizing agents and formation of composites with PVC
(19821988)
Polymers for Advanced Technologies 22 #12 (2011)
Micropatterning of proteins on ion beam-induced poly(acrylic acid)-grafted
polyethylene film
(19891992)
Polymers for Advanced Technologies 22 #12 (2011)
Effects of multiwalled carbon nanotube on holographic polymer dispersed liquid
crystal
(19932000)
Polymers for Advanced Technologies 22 #12 (2011)
Structural evolution during uniaxial deformation of natural rubber reinforced
with nano-alumina
(20012008)
Polymers for Advanced Technologies 22 #12 (2011)
Preparation of amino acid ester substituted polyphosphazene microparticles via
electrohydrodynamic atomization
(20092016)
Polymers for Advanced Technologies 22 #12 (2011)
Organic-montmorillonite modified shape memory epoxy composite
(20172021)
Polymers for Advanced Technologies 22 #12 (2011)
Study on elastic modulus of crosslinked polyurethane/organoclay nanocomposites
(20222031)
Polymers for Advanced Technologies 22 #12 (2011)
Adsorption properties of amidoximated porous acrylonitrile/methyl acrylate
copolymer beads for Ag (I)
(20322038)
Polymers for Advanced Technologies 22 #12 (2011)
The effect of electron beam irradiation on dynamic shear rheological behavior of
a poly (propylene-co-ethylene) heterophasic copolymer
(20392043)
Polymers for Advanced Technologies 22 #12 (2011)
Dependence of mechanical properties on β-form content and crystalline morphology
for β-nucleated isotactic polypropylene
(20442054)
Polymers for Advanced Technologies 22 #12 (2011)
Synthesis and optical properties of poly (vinyl acetate)/bismuth oxide nanorods
(20552061)
Polymers for Advanced Technologies 22 #12 (2011)
Morphological development in water assisted injection molded
polyethylene/polyamide-6 blends
(20622068)
Polymers for Advanced Technologies 22 #12 (2011)
Thermal and dynamic mechanical properties of epoxy
resin/poly(urethane-imide)/polyhedral oligomeric silsesquioxane nanocomposites
(20692074)
Polymers for Advanced Technologies 22 #12 (2011)
Photogeneration of free charge carriers in tenuously packed π conjugated polymer
chains
(20752083)
Polymers for Advanced Technologies 22 #12 (2011)
Electrical conductivity enhancement of polyaniline by refluxing
(20842090)
Polymers for Advanced Technologies 22 #12 (2011)
Interpenetrating polymer network hydrogels based on silicone and
poly(2-methacryloyloxyethyl phosphorylcholine)
(20912095)
Polymers for Advanced Technologies 22 #12 (2011)
Precipitation polymerization in acetonitrile and 1-propanol mixture: synthesis
of monodisperse poly(styrene-co-divinylbenzene) microspheres with clean and
smooth surface
(20962103)
Polymers for Advanced Technologies 22 #12 (2011)
An environmental friendly approach for recycling of post-vulcanized
fluoroelastomer scraps through high-shear mechanical milling
(21042109)
Polymers for Advanced Technologies 22 #12 (2011)
Photovoltaic properties of the polymer solar cells comprising crosslinked
maleimide polymers and fullerene-derivative PCBM
(21102122)
Polymers for Advanced Technologies 22 #12 (2011)
Synthesis and thermal behavior of a novel UV-curable transparent flame retardant
film and phosphorus-nitrogen synergism of flame retardancy
(21232129)
Polymers for Advanced Technologies 22 #12 (2011)
Synthesis and properties of all solid polymer electrolytes based on poly(vinyl
acetate-co-acetyl ethylene oxide acrylate)
(21302135)
Polymers for Advanced Technologies 22 #12 (2011)
Flame retardancy mechanisms of poly(1,4-butylene terephthalate) containing
microencapsulated ammonium polyphosphate and melamine cyanurate
(21362144)
Polymers for Advanced Technologies 22 #12 (2011)
Environmental vapor induced self-assembly of an amphiphilic block copolymer
poly(styrene-b-acrylamide) onto the solid substrate
(21452150)
Polymers for Advanced Technologies 22 #12 (2011)
Preparation of poly(phenylsilsesquioxane) (PPSQ) particles with ladder structure
and the thermal stability of PP/PPSQ composites
(21512156)
Polymers for Advanced Technologies 22 #12 (2011)
Study on the friction and wear behavior of surface-modified carbon nanotube
filled carbon fabric composites
(21572165)
Polymers for Advanced Technologies 22 #12 (2011)
Radar transparent glass fabric reinforced polyetherimide/Cloisite 30B
nanocomposites
(21662172)
Polymers for Advanced Technologies 22 #12 (2011)
Morphological investigations of block sulfonated poly(arylene ether ketone)
copolymers as potential proton exchange membranes
(21732181)
Polymers for Advanced Technologies 22 #12 (2011)
A biocompatible composite based on poly(ε-caprolactone fumarate) and
hydroxyapatite
(21822190)
Polymers for Advanced Technologies 22 #12 (2011)
Study on tribological behaviors of short glass fiber and polytetrafluoroethylene
reinforced polycarbonate composites via a d-optimal mixture design
(21912200)
Polymers for Advanced Technologies 22 #12 (2011)
Pyrogallic acid-PLGA conjugate as new biodegradable material suitable for final
sterilization by irradiation
(22012205)
Polymers for Advanced Technologies 22 #12 (2011)
Structure and properties of clay nano-biocomposites based on poly(lactic acid)
plasticized with polyadipates
(22062213)
Polymers for Advanced Technologies 22 #12 (2011)
Production of highly conductive textile viscose yarns by chemical vapor
deposition technique: a route to continuous process
(22142221)
Polymers for Advanced Technologies 22 #12 (2011)
Structure and wettability relationship of coelectrospun poly (L-lactic
acid)/gelatin composite fibrous mats
(22222230)
Polymers for Advanced Technologies 22 #12 (2011)
Adsorption of aqueous Hg (II) by a novel
poly(aniline-co-o-aminophenol)/mesoporous silica SBA-15 composite
(22312236)
Polymers for Advanced Technologies 22 #12 (2011)
Enhancement of a hyperbranched charring and foaming agent on flame retardancy of
polyamide 6
(22372243)
Polymers for Advanced Technologies 22 #12 (2011)
Multifunctional PES fabrics modified with colloidal Ag and TiO2 nanoparticles
(22442249)
Polymers for Advanced Technologies 22 #12 (2011)
Flammability of carbon nanofiberclay nanopaper based polymer composites
(22502256)
Polymers for Advanced Technologies 22 #12 (2011)
In situ reactive compatibilization of polypropylene/epoxidized natural rubber
blends by electron induced reactive processing: novel in-line mixing technology
(22572263)
Polymers for Advanced Technologies 22 #12 (2011)
Novel fiber reinforced bismaleimide/diallyl bisphenol A/microcapsules composites
(22642272)
Polymers for Advanced Technologies 22 #12 (2011)
Uncross-linked polypropylene (PP)/ethylene-propylene-diene (EPDM)/multi walled
carbon nanotube (MWCNT) and dynamically vulcanized PP/EPDM/MWCNT nanocomposites
(22732278)
Polymers for Advanced Technologies 22 #12 (2011)
Water effect on the rheologic behavior of PAN solution during thermal-induced
gelation process
(22792284)
Polymers for Advanced Technologies 22 #12 (2011)
Optimization of organo-layered double hydroxide dispersion in LDPE-based
nanocomposites
(22852294)
Polymers for Advanced Technologies 22 #12 (2011)
A method for simultaneously improving the flame retardancy and toughness of PLA
(22952301)
Polymers for Advanced Technologies 22 #12 (2011)
Preparation of nanoalumina/EPDM composites with good performance in thermal
conductivity and mechanical properties
(23022310)
Polymers for Advanced Technologies 22 #12 (2011)
Synthesis and characterization of organo-soluble polyamides containing triaryl
imidazole pendant and ether linkage moieties: thermal, photophysical, and
chemiluminescent properties
(23112318)
Polymers for Advanced Technologies 22 #12 (2011)
Influence of organoclay dispersed state of poly(ethylene
glycol-co-1,3/1,4-cyclohexanedimethanol terephthalate)/organoclay nanocomposites
on their characteristics
(23192324)
Polymers for Advanced Technologies 22 #12 (2011)
Hyperbranched poly (amine-ester)-poly (lactide-co-glycolide) copolymer and their
nanoparticles as paclitaxel delivery system
(23252335)
Polymers for Advanced Technologies 22 #12 (2011)
Synthesis of poly(arylene ether sulfone)-block-sulfonated polybutadiene: the
selective post-sulfonation of block copolymers as proton exchange membranes
(23362343)
Polymers for Advanced Technologies 22 #12 (2011)
Microbial desulfurization of SBR ground rubber by Sphingomonas sp. and its
utilization as filler in NR compounds
(23442351)
Polymers for Advanced Technologies 22 #12 (2011)
Effect of organoclay loading and electron beam irradiation on the
physico-mechanical properties of low-density polyethylene/ethylene-vinyl acetate
blend
(23522359)
Polymers for Advanced Technologies 22 #12 (2011)
Chain extension of adipic acid and (or) succinic acid/butanediol polyesters with
2,2′-(1,4-phenylene)-bis(2-oxazoline) and adipoylbiscaprolactamate combined
chain extenders
(23602367)
Polymers for Advanced Technologies 22 #12 (2011)
Covalent VEGF protein immobilization on resorbable polymeric surfaces
(23682373)
Polymers for Advanced Technologies 22 #12 (2011)
Kinetic study of polysulfide-acrylate click reaction by DEA and DMA
(23742381)
Polymers for Advanced Technologies 22 #12 (2011)
Fire retardant synergisms between nanometric Fe2O3 and aluminum phosphinate in
poly(butylene terephthalate)
(23822391)
Polymers for Advanced Technologies 22 #12 (2011)
The impact of resorcinol bis(diphenyl phosphate) and poly(phenylene ether) on
flame retardancy of PC/PBT blends
(23922402)
Polymers for Advanced Technologies 22 #12 (2011)
Microencapsulated ammonium polyphosphate with epoxy resin shell: preparation,
characterization, and application in EP system
(24032408)
Polymers for Advanced Technologies 22 #12 (2011)
Preparation of a liquid boron-modified polycarbosilane and its ceramic
conversion to dense SiC ceramics
(24092414)
Polymers for Advanced Technologies 22 #12 (2011)
Solventless silicone hybrids based on polyhedral oligomeric silsesquioxane and
hyperbranched polysiloxane for vacuum pressure impregnation process
(24152423)
Polymers for Advanced Technologies 22 #12 (2011)
Non-surfactant template-directed synthesis of SiO2-polyimide hybrid
self-standing films with ordered mesoporous structure
(24242429)
Polymers for Advanced Technologies 22 #12 (2011)
Synthesis and characterization of hydrophilic polyester-PEO networks with
shape-memory properties
(24302438)
Polymers for Advanced Technologies 22 #12 (2011)
Magnetically assisted removal and separation of cationic dyes from aqueous
solution by magnetic nanocomposite hydrogels
(24392447)
Polymers for Advanced Technologies 22 #12 (2011)
Phase separation of polyphosphazene/poly(lactide-co-glycolide) blends prepared
under different conditions
(24482457)
Polymers for Advanced Technologies 22 #12 (2011)
Thermal and optical properties of some phosphorus-containing
poly(1,3,4-oxadiazole-ester-imide)s
(24582468)
Polymers for Advanced Technologies 22 #12 (2011)
Polyurea nanocapsules obtained from nano-emulsions prepared by the phase
inversion temperature method
(24692473)
Polymers for Advanced Technologies 22 #12 (2011)
Synthesis and ceramic conversion of a new oligomeric precursor to boron nitride
(24742479)
Polymers for Advanced Technologies 22 #12 (2011)
Effect of a triazine ring-containing charring agent on fire retardancy and
thermal degradation of intumescent flame retardant epoxy resins
(24802487)
Polymers for Advanced Technologies 22 #12 (2011)
Preparation, characterization, and properties of poly(thioether ether ketone
imide)s from isomeric bis(chlorophthalimide)s
(24882495)
Polymers for Advanced Technologies 22 #12 (2011)
A comparison of the strength of autohesion of plasma treated amorphous and
semi-crystalline PEEK films
(24962502)
Polymers for Advanced Technologies 22 #12 (2011)
Comparative study of the optical, electrochemical, electrolumiscent, and
photovoltaic properties of dendritic pendants modified poly(p-phenylene
vinylene)s
(25032508)
Polymers for Advanced Technologies 22 #12 (2011)
Functional membranes prepared by layer-by-layer assembly and its metal ions
adsorption property
(25092516)
Polymers for Advanced Technologies 22 #12 (2011)
Studies of modification of HDPE and interfacial interaction of its composites
with sericite
(25172522)
Polymers for Advanced Technologies 22 #12 (2011)
Optically high transparency and light color of organosoluble fluorinated
polyamides with bulky xanthene pendent groups
(25232532)
Polymers for Advanced Technologies 22 #12 (2011)
Largely enhanced ductility of immiscible high density polyethylene/polyamide 6
blends via nano-bridge effect of functionalized multiwalled carbon nanotubes
(25332542)
Polymers for Advanced Technologies 22 #12 (2011)
Structure-controlled synthesis of novel soluble and thermally stable poly (aryl
ether nitrile ether ketone ketone)/poly (aryl ether nitrile ether ketone
biphenyl ketone) copolymers by electrophilic polycondensation
(25432549)
Polymers for Advanced Technologies 22 #12 (2011)
Structure and optoelectronic properties of PbSe quantum dots /PVA. Does the
polymer molecular weight matter?
(25502555)
Polymers for Advanced Technologies 22 #12 (2011)
Separation of nitrogen and oxygen gases by polymeric membrane embedded with
magnetic nano-particle
(25562563)
Polymers for Advanced Technologies 22 #12 (2011)
Effect of organo-modified montmorillonite on flame retardant poly(1,4-butylene
terephthalate) composites
(25642570)
Polymers for Advanced Technologies 22 #12 (2011)
Novel synthesis of nano-calcium carbonate (CaCO3)/polystyrene (PS) coreshell
nanoparticles by atomized microemulsion technique and its effect on properties
of polypropylene (PP) composites
(25712582)
Polymers for Advanced Technologies 22 #12 (2011)
Two novel branched chain polymeric metal complexes based on Cd(II), Zn(II) with
fluorene, thiophene, 8-hydroxyquinoline, and 1,10-phenathroline ligand:
synthesis, characterization, photovoltaic properties, and their application in
DSSCs
(25832591)
Polymers for Advanced Technologies 22 #12 (2011)
High carbon yield thermoset resin based on phenolic resin, hyperbranched
polyborate, and paraformaldehyde
(25922595)
Polymers for Advanced Technologies 22 #12 (2011)
Poly(dimethylsiloxane)/palygorskite composites: preparation, characterization,
and properties
(25962601)
Polymers for Advanced Technologies 22 #12 (2011)
Synergistic effects of cerium phosphate and intumescent flame retardant on
EPDM/PP composites
(26022608)
Polymers for Advanced Technologies 22 #12 (2011)
Effect of polysiloxane and silane-modified SiO2 on a novel intumescent flame
retardant polypropylene system
(26092616)
Polymers for Advanced Technologies 22 #12 (2011)
Modified cyanate ester resins with lower dielectric loss, improved thermal
stability, and flame retardancy
(26172625)
Polymers for Advanced Technologies 22 #12 (2011)
Atom transfer radical polymerization with activators regenerated by electron
transfer of acrylonitrile from silica nanoparticles, and adsorption properties
of the resin for Hg2+ after amidoximation with hydroxylamine
(26262632)
Polymers for Advanced Technologies 22 #12 (2011)
Preparation, characterization, and properties of polyamic acid nano-emulsion
(26332637)
Polymers for Advanced Technologies 22 #12 (2011)
Protein template effect on hydrotalcite morphology
(26382642)
Polymers for Advanced Technologies 22 #12 (2011)
Preparation and characterization of bacterial cellulose/heparin hybrid nanofiber
for potential vascular tissue engineering scaffolds
(26432648)
Polymers for Advanced Technologies 22 #12 (2011)
Multi-responsive methylcellulose/Fe-alginate-g-PVA/PVA/Fe3O4 microgels for
immobilizing enzyme
(26492652)
Polymers for Advanced Technologies 22 #12 (2011)
Development of novel synthetic method of carbon nanotubes from electrospun
polystyrene fibers by using microwave heating
(26532658)
Polymers for Advanced Technologies 22 #12 (2011)
Preparation and characterization of nano-platelet-like hydroxyapatite/gelatin
nanocomposites
(26592664)
Polymers for Advanced Technologies 22 #12 (2011)
Morphology and properties of natural rubber with nanomatrix of non-rubber
components
(26652667)
Polymers for Advanced Technologies 22 #12 (2011)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
14.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
15.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
16.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
17.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
18.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
19.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
20.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
21.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
22.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
23.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
24.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
25.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
26.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
27.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
28.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
29.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
30.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
31.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
32.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
33.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
34.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
35.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
36.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
37.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
38.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
39.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
40.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
41.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
42.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
43.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
44.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
45.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
46.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
47.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
48.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
49.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
50.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
51.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
52.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
53.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
54.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
55.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
56.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
57.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
58.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
59.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
60.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
61.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
62.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
63.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
64.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
65.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
66.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
67.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
68.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
67.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
70.
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Roger D. Corneliussen
Editor
www.maropolymeronline.com
Maro Polymer Links
Tel: 610 363 9920
Fax: 610 363 9921
E-Mail:
cornelrd@bee.net
***********************************
Copyright 2011 by Roger D. Corneliussen.
No part of this transmission is to be duplicated in any manner or
forwarded by electronic mail without the express written permission of Roger D.
Corneliussen
**************************************
** Date of latest addition; date of first entry is 9/26/2011.