Maro Publications

Grafting

Articles with Abstracts

*4/24/2012

Maro Topics

Comments

Articles without Abstracts

Books.htm

Notes

Patents with Abstracts

Patents without Abstracts

Review Articles

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 

Articles with Abstracts

Plasma modification of polypropylene surfaces and grafting copolymerization of styrene onto polypropylene
(423-435)
Chinese Journal of Polymer Science 30, #3 (2012)
Ma et al, China, modified the surface of polypropylene (iPP) with glow discharge plasma of Ar, so that the modified surfaces of iPP films are obtained.  The surfaces of iPP are achieved with Ar plasma treatment followed by grafting copolymerization with styrene (St) in St.  The grafting rate is dependent on plasma exposure time and discharge voltage. The studies show that homopolymerization of St occurs at the same time during the grafting copolymerization of St onto iPP.  (RDC 4/30/2012)

The application of response surface methodology on the synthesis of grafted polypropylene through the solvothermal rout
(pages 109–117)
Advances in Polymer Technology 31 #2 (2012)
Zheng et al of Fuzhou University, China, used xylene–water-thermal reaction of polypropylene (PP), styrene (St), and maleic anhydride (MAH) under pressure to prepare grafting polymers. Infrared (IR) spectra and NMR spectra confirmed that MAH and St were successfully grafted onto the PP backbones. Through differential scanning calorimetry (DSC) and X-ray analysis, it was found that the crystallinity of grafting polymers decreased due to the formation of side chains.  (RDC 4/24/2012)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 

Roger D. Corneliussen
Editor
www.maropolymeronline.com

Maro Polymer Links
Tel: 610 363 9920
Fax: 610 363 9921
E-Mail: cornelrd@bee.net  

***********************************

Copyright 2012 by Roger D. Corneliussen.
No part of this transmission is to be duplicated in any manner or forwarded by electronic mail without the express written permission of Roger D. Corneliussen
**************************************

* Date of latest addition; date of first entry is 4/24/2012.