Park, Chul B., PhD
Contents
Position
Education
Experience
Research Summary
Courses
Administrative
Professional
Conferences
Reviewer
Honors
Personal
PhD Students
Masters of Science Students
Masters of Engineering Students
Post Doctoral Fellows
Research Associates
Patents
Articles
Books
Conference Proceedings
Abstracts
Theses
Lectures /Seminars
Position
Associate
Professor
Department of Mechanical and Industrial Engineering
University of Toronto
5 King's College Road
Toronto, Ontario, Canada M5S 3G8
Tel: 416-978-3053
Fax: 416-978-3053
E-mail: park@mie.utoronto.ca
http://www.mie.utoronto.ca/staff/profiles/park.html
Visiting Professor
Department of Mechanical Design and
Production Engineering
To
return to beginning of this page click on
Contents
EDUCATION
Massachusetts Institute of Technology
Cambridge, MA
Ph.D. in Mechanical Engineering, May 1993.
Thesis title:
The role of polymer/gas solutions in continuous processing
of microcellular polymers.
Degree minors:
Materials Science,
Economics, and Management.
Areas of emphasis:
Design, modeling and control of manufacturing processes,
thermodynamics, kinetics, rheology, and machining.
Korea Advanced Institute of Science and Technology
Seoul, Korea
Master of
Science in Mechanical Engineering, February 1985.
Thesis title:
Minimization of the clearance effects in a revolute joint
of mechanical systems.
Areas of emphasis:
CAD, CAM, S/W structure design, and optimal design.
Seoul National University
Seoul, Korea
Bachelor of Science in Mechanical Engineering, February 1983
To
return to beginning of this page click on
Contents
EXPERIENCE
Seoul National University, Seoul, Korea,
01/2000-06/2000
Chair
Manufacturing Systems Option,
Engineering Science Division
University of Toronto, Toronto, Ontario,
07/1998-present
Associate Professor
Department of Mechanical and Industrial Engineering
(Tenured)
University of Toronto, Toronto, Ontario,
07/1998-present
Assistant Professor
Department of Mechanical and Industrial Engineering
University of
Toronto, Toronto, Ontario,
07/1993-06/1998
Developed Microcellular Plastics Manufacturing Laboratory.
Developed Rapid Prototyping and Manufacturing Laboratory.
To
return to beginning of this page click on
Contents
Research
Summary
Interest
areas:
Plastic Foaming,
Design
Career total:
5 PDF, 4 PhD, 10 MASc, 9 MEng, 52 BASc
Courses
Taught
MEC476S: Machining and
Forming 1993-94
MEC456S: Microprocessor Applications 1993-95
MEC377F: Fundamental Manufacturing Technologies 1994-97
MIE321S: Manufacturing Engineering 1994-99
MIE372F: Control Systems 1995-99
MIE1716S: Design and Computer Aided Engineering
To
return to beginning of this page click on
Contents
Administrative
Activities
Assistant
Coordinator of the U of T Day Open House 1993-94
Faculty Search Committee for a Design Position 1993-94
Departmental Coordinator of the U of T Day Open House 1994-98
Undergraduate Curriculum Committee 1994-96
Examinations Committee 1995-96
Faculty Search Committee for a Design Position 1996-97
PEY Program Committee (3S-03) 1997-98
ASME/CSME Faculty Adviser at U of T 1996-present
High School Liaison Committee 1998-present
Manufacturing Option Chair of Engineering Science
Division 1998-
present Research Assistant
Laboratory for Manufacturing and Productivity
Massachusetts Institute of Technology, Cambridge, MA
September 1988 - June 1993
Developed the first generation microcellular extrusion
system including the nucleation device and a pump
for high pressure CO2.
Research Engineer
Mechanical Systems Laboratory
Korea Advanced Institute of Technology, Korea
March 1984 - April 1988
Developed pre-
and post-processors for quadrilateral
and brick elements of FEM, a dynamic motion-
simulation program for a military vehicle,
and an optimal design software for a rapier-type
weaving machine.
To
return to beginning of this page click on
Contents
Vice-President of the Association of Korean-CanadianScientists and Engineers
Board of Director in the Thermoplastics Materials
and Foams Division, Society
of Plastics Engineers
General Secretary of the Korean-Canadian
University Professors Forum
Professional Engineer with the Association of
Professional Engineers of Ontario
Senior Member of the Society of Plastics Engineers
Member of the American Society of Mechanical Engineers
Member of the Canadian Society for Mechanical Engineering
Member of the Polymer Processing Society
To
return to beginning of this page click on
Contents
CONFERENCES
Session Co-Chair at the ASME WAM, Session MAT-8A,
Chicago, IL, November 1994
Session Chair at
the SPE ANTEC,
Session M6, Indianapolis, IN, May 1996
Session Chair at the ASME WAM,
Session MAT-8B, Atlanta, GA,
November 1996
Session Chair at the SPE ANTEC, Session W30,
Toronto, Ontario, April 1997
To
return to beginning of this page click on
Contents
REVIEWER
Polymer Engineering and Science
Polymer
Composites
ASME Transactions,
Journal of Manufacturing Science and Engineering
ASME Transactions,
Journal of Engineering Materials and Technology
Cellular Polymers
Research in Engineering Design
Colloids and Surfaces, A:
ASME IMECE (WAM),
Symposium on Cellular and Microcellular Materials
ASME, Design Engineering Technical Conferences
SPE, Annual Technical Conference -
Thermoplastics and Foams Division
National Science Foundation
Materials and Manufacturing Ontario
To
return to beginning of this page click on
Contents
HONORS
and AWARDS
Academic Excellence Scholarship,
Seoul National University, 1979-1983.
Academic
Excellence (ranked #1 in Mech Eng Dept)
Graduation Award, Seoul National University, 1983.
United Nations Development Program Award (US$11,200),
1986.
Best 5 Papers with D.F. Baldwin and N.P. Suh,
SPE ANTEC, TPM&F Division, 1994.
Engineering Research Award Grant (US$23,000, declined),
Engineering Foundation, 1994-95.
Best 5 Papers with L.M. Matuana and J.J. Balatinecz,
SPE ANTEC, TPM&F Division, 1996.
Best Thesis Paper Award (total US$6,000)
with L.M. Matuana and J.J. Balatinecz
SPE ANTEC, Vinyl Division, 1997.
Best 5 Papers with G. Liu and J.A. Lefas,
SPE ANTEC, TPM&F Division, 1998.
Best 5 Papers with M. Lee and C. Tzoganakis,
SPE ANTEC, TPM&F Division, 1998.
Premier's Research Excellence Award (total $150,000),
Ontario, Canada, 1999-2004.
Who's Who in Polymers and Plastics, nominated, 1999.
To
return to beginning of this page click on
Contents
PERSONAL
Born
in South Korea on May 6, 1960.
Canadian Citizen
Triple Black Belt of Tae Kwon Do
Born-again christian
TRAINING
OF HIGHLY QUALIFIED PERSONNEL
(Co-Supervision +)
1. L.M. Matuana+, Ph.D.
(Fonds FCAR Scholarship holder)
Wood-Fiber/PVC Composites and
their Microcellular Foams, 1993-97.
Currently Assistant Professor at
Michigan Tech University, Michigan, USA
2. A.H.
Behravesh+, Ph.D.
(Iranian Government Scholarship holder)
Extrusion Processing of Low-Density,
Microcellular Foams, 1993-98.
Currently Assistant Professor at
Tarbiat Modarres University, Tehran, Iran
3. G. Zak+, Ph.D.
(NSERC PGS-B Scholarship holder)
Rapid Layered Manufacturing of Short-Fibre-
Reinforced Parts, 1995-98.
Currently Assistant Professor at
Queens University, Kingston, Canada
4. M. Lee+, Ph.D.
Extrusion of Polymers and Polymer Blends
in the Presence of Supercritical Carbon Dioxide
(at the University of Waterloo), 1995-1999.
Currently
Postdoctoral Fellow at University of Waterloo,
Waterloo, Canada
5. H.E. Naguib, Ph.D.
(OGS Scholarship holder)
Foamability of PP, 1997-present
6. X. Guan+, Ph.D.
(Beattie Scholarship holder)
Computer Control of Fine-Cell Foam Sheet
Processing, 1998-present
7. X. Xu, Ph.D.
(Connaught Scholarship holder)
Rotational Foam Molding, 1998-present
8. G. Rizvi, Ph.D.
(OGSST Scholarship holder)
Foaming of Plastic/Wood-Fiber
Composites
Using a CBA,
1999-present
9. R. Pop-Iliev, Ph.D.
(NSERC PGS-B Scholarship holder)
Compounding Rotational Foam Molding,
1999-present
10. G. Guo, Ph.D.
Extrusion of Artificial Wood, 1999-present
11. D. Xu, Ph.D.
Foaming of Biodegradable Polyester, 2000-present
To
return to beginning of this page click on
Contents
1. J.L. Mulrooney+, M.A.Sc.
(NSERC PGS-A Scholarship holder)
An Investigation of a Sorption Apparatus to
Measure the Solubility and Diffusivity of a
Liquid Blowing Agent in a Polymer at an
Elevated Pressure, 1993-95
Currently an Engineer in Decoma International Inc.,
Ontario, Canada
2. L.K. Cheung, M.A.Sc.
(Connaught Scholarship holder)
Processing of Fine-Cell PP Foams in Extrusion, 1994-96
Currently an Engineer at Celestica
Inc., Ontario, Canada
3. V. Yevko+, M.A.Sc.
Cladding Formation in Laser-Beam Fusion of Metal Powder,
1996-97
Currently an Engineer at Orion Bus Industries, Ontario, Canada
4. A.K. Yeung, M.A.Sc.
Development of Microcellular Foam Sheet Extrusion Systems,
1996-98
Currently an Engineer at Celestica, Ontario, Canada
5. F. Liu, M.A.Sc.
Processing of Polyethylene and Polypropylene Foams
in Rotational Molding, 1996-98
Currently an MBA student at U of
Toronto, Ontario, Canada
6. G. Rizvi, M.A.Sc.
Extrusion Foaming of Plastic/Wood-Fiber Composites
Using a Chemical Blowing Agent, 1997-99
Currently a Ph.D. student at U of Toronto, Canada
7. R. Pop-Iliev, M.A.Sc.
Processing of Fine-Cell Polypropylene Foams in
Compounding-Based Rotational Foam Molding, 1997-99
Currently a Ph.D. student at U of Toronto, Canada
8. S.S. Park, M.A.Sc.
(NSERC PGS-A Scholarship holder)
On-Line Measurement of the PVT Properties of Polymer/CO2
Solutions Using a Foam Extrusion System and
a Gear Pump, 1997-99
Currently a Ph.D. student at UBC, Canada
9. D. Ladin, M.A.Sc.
(OGS Scholarship holder)
Study of the Rheological Properties of Polymer/Gas Solutions
Based on a Foam Extrusion System, 1997-99
Currently an Engineer at Greenshpoon Import Ltd., Ontario, Canada
10. H. Zhang, M.A.Sc.
Extrusion Foaming of Fine-Celled Plastic/Wood-Fiber Composites
Using CO2 as a Blowing Agent,
1998-1999
11. M. Haberer+, M.A.Sc.
(OGSST Scholarship holder)
Rapid Manufacturing of
Fiber-reinforced Plastics, 1998-present
12. C. Ozolins, M.A.Sc.
Design and Construction of an Injection Foam Molding System,
1998-present
13. P. Lee, M.A.Sc.
Open-Celled Foaming, 1999-present
14. E. Richards, M.A.Sc.
(Canadian Commonwealth Scholarship)
Measurement and Modeling of Thermodynamic Properties of
Environmentally Safe Blowing Agents in Polymer Melts,
1999-present
15. L. Lin, M.A.Sc.
Foaming of Plastic/Wood-Fiber Composites Using a PBA,
1999-present
To
return to beginning of this page click on
Contents
1. D. Paidar+, M.Eng.
Design of a Sorption System for the Measurement of
Solubility and Diffusivity of Water in Polymers, 1993-94
Currently an Engineer in Iranian industry.
2. A.Y.F. Chan+, M.Eng.
Viscosity Analysis for Short Glass-Fiber and Photopolymer
Mixtures for a Stereolithography System, 1994-95
Currently an Engineer at Manchester Plastics, Ontario, Canada
3. D. Abeygun, M.Eng.
Rotational Molding Machine Design Using Axiomatic
Design Concept, 1995-96
Currently an Engineer at Rea
Inernational, Ontario, Canada
4. M. Pan, M.Eng.
Extrusion of Microcellular PS Filament and Fine-Cell,
Low-Density PS Sheet, 1995-96
Currently an Engineer at Royal Precision Tooling, Ontario, Canada
5. D. Fernandes, M.Eng.
Measurement of the Rheological Properties of High Density
Polyethylenes, 1996-97
Currently an Engineer at Case
Corporation, Ontario, Canada
6. O. Kornienko, M.Eng.
A NURBS Based Approach to Direct Slicing of Solid Models
for Rapid Prototyping, 1996-98
Currently an Engineer at Torrid Oven, Ontario, Canada
7. I. Naguib+, M.Eng.
Determination of Optimal Orientation and Direct Slicing of
Glass Fiber Reinforced Stereolithography Parts, 1997-98
8. T. Chow+, M.Eng.
Design of the Powder Composition Control and
Delivery System for Laser Fusion Deposition, 1996-98
Currently an Engineer in Magna, Ontario, Canada
9. C.N. Xie, M.Eng.
Injection Foam Molding of Polystyrene Using a Chemical Agent or Prefoamed
Pellets, 1998-99
To
return to beginning of this page click on
Contents
Post-Doctorate Fellows / Visiting Professors
1. Dr. S.-W. Song
Crystallization Behavior in Plastic Foaming Processing, 1998-98
2. Prof. J.G. Shin
Rapid Prototyping, 1998-99
3. Dr. S.M. Lee
Visualization of Foam Processing, 1998-99
4. Dr. Y. Liu
Foam Extrusion of Semi-Crystalline Polymers, 1996-99
5. Prof. Z. Xu
Computer Control of Plastic Foam Processing,
1999-present
6. Dr. V. Padareva
Artificial Wood,
1999-present
To
return to beginning of this page click on
Contents
1. H. Pu+
Process Control on Rapid Prototyping and
Manufacturing System, 1995-96
2. G. Liu
Rotational Foam Molding, 1996-97
PUBLICATION LIST
To
return to beginning of this page click on
Contents
1. S.W. Cha, N.P. Suh, D.F.
Baldwin, and C.B. Park,
"Microcellular Thermoplastic Foamed with Supercritical Fluid,"
U.S. Patent 5158986, October
1992; Japan Patent 2625576,
April 1997.
2. D.F. Baldwin, N.P. Suh, C.B.
Park, and S.W. Cha,
"Supermicrocellular Foamed Materials,"
U.S. Patent 5334356, August 1994.
3. C.B. Park, N.P. Suh, and
D.F. Baldwin,
"A Method for Providing Continuous Processing of Microcellular
and Supermicrocellular Foamed Materials,"
U.S. Patent 5866053, February 1999
4. C.B. Park, G. Liu, F. Liu,
R. Pop-Iliev, S. D'Uva,
and B. Zhang
"Production of Foamed Low-Density Polypropylene by
Rotational molding,"
U.S. Patent Processing, Ser. # 09/324047, June 1999.
To
return to beginning of this page click on
Contents
1. C.B. Park and ---
--- zation for Reducing Dynamic Effects of Clearance at
a Revolute Joint,"
Mechanism and Machine Theory,
Vol. 22, No. 6, pp. 549-556, 1987.
2. D.F. Baldwin, D. Tate, C.B.
Park, S.W. Cha,
and N.P. Suh,
"Microcellular Plastics Processing Technology (1) & (2),"
Journal of Japan Society of Polymer Processing (SEIKEI-KAKOU),
Vol. 6, No. 3, pp. 187-194, 1994 and
Vol. 6, No. 4, pp. 245-256, 1994.
3. C.B. Park, D.F. Baldwin,
and N.P. Suh,
"Effect of the Pressure Drop Rate on Cell Nucleation
in Continuous Processing of Microcellular Polymers,"
Polymer Engineering and Science,
Vol. 35, No. 5, pp. 432-440, 1995.
4. C.B. Park and N.P. Suh,
"Filamentary Extrusion of Microcellular Polymers
Using a Rapid Decompressive Element,"
Polymer Engineering and Science,
Vol. 36, No. 1, pp. 34-48, 1996.
5. D.F. Baldwin, C.B. Park,
and N.P. Suh,
"An Extrusion System for the Processing of
Microcellular Polymer Sheets: Shaping and Cell Growth Control,"
Polymer Engineering and Science,
Vol. 36, No. 10, pp. 1425-1435, 1996.
6. D.F. Baldwin, C.B. Park,
and N.P. Suh,
"A Microcellular Processing Study of Poly(ethylene Terephthalate)
n the Amorphous and Semi-Crystalline States:
Part I Microcell Nucleation,"
Polymer Engineering and Science,
Vol. 36, No. 11, pp. 1437-1445, 1996.
7. D.F. Baldwin, C.B. Park,
and N.P. Suh,
"A Microcellular Processing Study of Poly(ethylene Terephthalate)
in the Amorphous and Semi-Crystalline States:
Part II Cell Growth and Process Design,"
Polymer Engineering and Science,
Vol. 36, No. 11, pp. 1446-1453, 1996.
8. C.B. Park and N.P. Suh,
"Rapid Polymer/Gas Solution Formation for
Continuous Processing of Microcellular Plastics,"
ASME Transactions,
Journal of Manufacturing Science and Engineering
(Journal of Engineering for Industry),
Vol. 118, No. 4, pp. 639-645, 1996.
9. C.B. Park, D.F. Baldwin,
and N.P. Suh,
"Axiomatic Design of a Microcellular Filament
Extrusion System,"
Research in Engineering Design,
Vol. 8, No. 3, pp. 166-177, 1996.
10. L. Matuana-Malanda, C.B.
Park,
and J.J. Balatinecz,
"Characterization of Microcellular Foamed
PVC/Cellulosic-Fiber Composites,"
Journal of Cellular Plastics,
Vol. 32, No. 5, pp. 449-469, 1996.
11. G. Zak, A.Y.F. Chan, C.B.
Park,
and B. Benhabib,
"Viscosity Analysis of Photopolymer and
Glass-Fibre Mixtures for Rapid Layered
Manufacturing,"
Rapid Prototyping Journal,
Vol. 2, No. 3, pp. 16-23, 1996.
12. S. Doroudiani, C.B. Park,
and M.T. Kortschot, "Effect of Crystallinity and Morphology
on the
Microcellular Foam Structure of
Semicrystalline Polymers," Polymer
Engineering and Science, Vol. 36, No. 21, pp. 2645-2662, 1996.
13. (Invited) A.H. Behravesh,
C.B. Park, L.K.
Cheung, and R.D. Venter,
"Extrusion of Polypropylene Foams
with
Hydrocerol and Isopentane,"
Journal
of Vinyl and Additive Technology,
Vol. 2, No. 4, pp. 349-357, 1996.
14. C.B. Park and L.K. Cheung,
"A Study of Cell Nucleation in the Extrusion of
Polypropylene Foams,"
Polymer Engineering and Science,
Vol. 37, No. 1, pp. 1-10, 1997.
15. L.M. Matuana, C.B. Park,
and J.J. Balatinecz,
"Processing and Cell Morphology Relationships
for
Microcellular Foamed PVC/Wood-Fiber
Composites,"
Polymer
Engineering and Science,
Vol. 37, No. 7, pp. 1137-1147, 1997.
16. L.M. Matuana, C.B. Park,
and J.J. Balatinecz,
"The Effect of Low Levels of Plasticizer on the
Rheological and Mechanical Properties of
Polyvinyl Chloride/Newsprint-Fiber
Composites,”
Journal of Vinyl and Additive Technology,
Vol. 3, No. 4, pp.
265-273, 1997.
17. L.M. Matuana, C.B. Park,
and J.J. Balatinecz,
"Structures and Mechanical Properties of
Microcellular
Foamed Polyvinyl Chloride,"
Cellular
Polymers,
Vol. 17, No. 1, pp. 1-16, 1998.
18. D.F. Baldwin, C.B. Park,
and N.P. Suh,
"Microcellular Sheet Extrusion System Process
Design Models
for Shaping and Cell Growth
Control,"
Polymer
Engineering and Science,
Vol. 38, No. 4, pp. 674-688, 1998.
19. D.Y. Kwok, L.K. Cheung, C.B.
Park,
and A.W. Neumann,
"Study on the Surface Tensions of Polymer Melts
Using Axisymmetic Drop Shape Analysis,"
Polymer
Engineering and Science,
Vol. 38, No. 5, pp. 757-764, 1998.
20. L.M. Matuana, J.J.
Balatinecz,
and C.B. Park,
"Effect of the Surface Properties on the
Adhesion
between PVC and Wood Veneer Laminates,"
Polymer
Engineering and Science,
Vol. 38, No. 5, pp. 765-773, 1998.
21. M. Lee, C. Tzoganakis, and
C.B. Park,
"Extrusion of PE/PS blends with Supercritical
Carbon
Dioxide,"
Polymer Engineering and Science,
Vol. 38, No. 7, pp. 1112-1120,
1998.
22. S. Doroudiani, C.B. Park,
and M.T. Kortschot,
"Processing and Characterization of
Microcellular
Foamed High Density
Polyethylene/Isotactic Polypropylene Blends,"
Polymer Engineering and Science,
Vol. 38, No. 7, pp. 1205-1215,
1998.
23. L.M. Matuana, R.T. Woodhams,
J.J.
Balatinecz, and C.B. Park,
"Influence of Interfacial Interactions on
the
Properties of PVC/Cellulosic Fiber Composites,"
Polymer
Composites,
Vol. 19, No. 4, pp. 446-455, 1998.
24. V. Yevko, C.B. Park, G. Zak,
T. Coyle, and B. Benhabib,
"Cladding Formation in Laser-Beam Fusion
of
Metal Powder,"
Rapid Prototyping
Journal,
Vol. 4, No. 4, pp. 168-184, 1998.
25. C.B. Park, L.K. Cheung,
and
S.-W. Song,
"The Effect of Talc on Cell Nucleation in
Extrusion Foam
Processing of Polypropylene
with CO2
and Isopentane,"
Cellular Polymers,
Vol. 17, No. 4, pp. 221-251, 1998.
26. C.B. Park, A.H. Behravesh,
and R.D. Venter,
"Low-Density, Microcellular Foam Processing
in Extrusion
Using CO2,"
Polymer Engineering and Science,
Vol. 38, No. 11, pp. 1812-1823,
1998.
27. L.M. Matuana, C.B. Park,
and J.J. Balatinecz,
"Cell Morphology and Property Relationships
of
Microcellular Foamed PVC/Wood-Fiber
Composites,"
Polymer
Engineering and Science,
Vol. 38, No. 11, pp. 1862-1872, 1998.
28. G. Liu, C.B. Park,
and J.A.
Lefas,
"Production of Low-Density LLDPE Foams in
Rotational Molding,"
Polymer Engineering and Science,
Vol. 38, No. 12, pp. 1997-2009,
1998.
29. A.H. Behravesh, C.B. Park,
and R.D. Venter,
"Challenge to the Production of Low-Density,
Fine-Cell
HDPE Foams Using CO2,"
Cellular Polymers,
Vol. 17, No. 4, pp. 309-326, 1998.
30. M. Lee, C.B. Park, and C.
Tzoganakis,
"Measurements and Modeling of PS/Supercritical
CO2
Solution Viscosities,"
Polymer
Engineering and Science,
Vol. 39, No. 1, pp. 99-109, 1999.
31. L.M. Matuana, J.J.
Balatinecz, C.B. Park,
and R.T. Woodhams,
"Surface Characteristics of
Chemically Modified
Newsprint Fibers Determined by Inverse Gas
Chromatography,"
Wood and Fiber Science,
Vol. 31, No. 2, pp. 116-127, 1999.
32. G. Zak, N.M. Sela, V. Yevko,
C.B. Park,
and B. Benhabib,
"Layered Manufacturing of Fiber-Reinforced
Composites,"
ASME Transactions,
Journal
of Manufacturing Science and Engineering,
Vol. 121, No. 3, pp. 448-456,
1999.
33. L.M. Matuana, J.J.
Balatinecz,
C.B. Park, and R.N.S. Sodhi,
"X-ray Photoelecron Study of
Silane-Treated Newsprint-Fibers,"
Wood
Science and Technology,
Vol. 33, pp. 259-270, 1999.
34. C.B. Park, Y. Liu,
and H.E.
Naguib,
"Challenge to Forty-fold Expansion of
Biodegradable Polyester Foams
Using CO2,"
Cellular Polymers,
Vol. 18, No. 4, pp. 000-000, 1999.
35. D.F. Baldwin, C.B. Park,
and N.P. Suh,
"An Axiomatic Approach to the Design of a
Continuous
Microcellular Polymer Processing
System,"
IIE Transactions on Design and
Manufacturing,
20 pp. + 9 figs., accepted in August 1997.
36. L.M. Matuana, J.J.
Balatinecz,
R.N.S. Sodhi, and C.B. Park,
"Surface Characterization of
Esterified Cellulosic
Fibers by XPS and FTIR Spectroscopy,"
Wood
Science and Technology,
15 pp. + 6 figs., accepted in October 1997.
37. G. Rizvi, L.M. Matuana,
and
C.B. Park,
"Foaming of PS/Wood-Fiber Composites Using
Moisture as a Blowing
Agent",
Polymer Engineering and
Science,
accepted in October 1999.
38. G. Zak, C.B. Park, M.
Haberer,
and B. Benhabib,
"Mechanical Properties of Short-fibre Layered
Composites: Prediction and Observation,"
Rapid
Prototyping Journal,
accepted in September 1999.
39. G. Zak, C.B. Park,
and B.
Benhabib,
"Estimation of Three-Dimensional
Fibre-Orientation Distribution
in Short-Fibre
Composites by a Two-Section Method,"
Journal
of Composite Materials,
accepted in January 2000.
40. G. Zak, M. Haberer, C.B.
Park,
and B. Benhabib,
"Estimation of Average Fibre Length in Short-Fibre
Composites by a Two-Section Method,"
Composites
Science and Technology,
accepted in January 2000.
41. C.B. Park, S.S. Park, D.
Ladin,
and H.E. Naguib,
"On-Line Measurement of the PVT Properties
of
Polymer Melts Using a Gear Pump,”
Polymer
Engineering and Science,
submitted, May 1999.
42. S.S. Park, C.B. Park, D.
Ladin,
H.E. Naguib, and C. Tzoganakis,
"Development of a Dilatometer for
Measurement of the PVT Properties of a
Polymer/Gas Solution Using a Foaming
Extruder and a Gear Pump,”
ASME Transactions,
Journal
of Manufacturing Science and Engineering,
submitted, August 1999.
43. M. Lee, C. Tzoganakis, and
C.B. Park,
"Extrusion of Polymer Blend with Supercritical
CO2,"
Advances in Polymer Technology,
submitted, August 1999.
44. R. Pop-Iliev, G. Liu, F.
Liu, and C.B. Park,
"Rotational Foam Molding of Polypropylene
with Control
of Melt Strength,"
Polymer
Engineering and Science,
submitted, December 1999.
45. H.E. Naguib and C.B. Park,
"Critical Shear Stress of Linear and
Branched Propylene/Butane Solutions
with Foaming Additives,"
Polymer
Engineering and Science,
submitted, December 1999.
46. D. Ladin, C.B. Park, S.S.
Park,
and H.E. Naguib,
"Study of Shear and Extensional Viscosities
of
Biodegradable PBS/CO2
Solutions,"
Cellular Plastics,
submitted, December 1999.
47. H. Naguib and C.B. Park,
"Challenge to the Production of Low-Density
PP Foams in Extrusion,"
Polymer
Engineering and Science,
manuscript completed but publication
postponed
because of patent filing.
To
return to beginning of this page click on
Contents
Chapters and Articles in Books
1. C.B. Park, A.H. Behravesh,
and R.D. Venter,
"Chapter 8 - A Strategy for Suppression of Cell
Coalescence in the Extrusion of Microcellular
HIPS Foams,"
in: Polymeric
Foams: Science and Technology,
K. Khemani, ed., ACS, Washington,
pp.
115-129, 1996
2. C.B. Park,
"Continuous
Production of High-Density
and Low-Density Microcellular Plastics
in
Extrusion,"
in: Principles of Plastic Foam Extrusion,
S.T. Lee, ed., accepted in
January 1999.
To
return to beginning of this page click on
Contents
1. C.B. Park and N.P. Suh,
"Rapid Heating for Microcellular Nucleation
in a Polymer Melt,"
SPE, ANTEC Technical Papers,
Vol.
38, pp. 1513-1518, 1992.
2. C.B. Park and N.P. Suh,
"Extrusion of Microcellular Filament: a Case
Study of Axiomatic
Design,"
In: Cellular Polymers,
MD-Vol. 38, V. Kumar and S.G. Advani, eds.,
ASME,
New York, pp. 69-91, 1992.
3. N.P. Suh, D.F. Baldwin,
S.W. Cha, C.B.
Park, T. Ota, J. Yang, and M. Shimbo,
"Synthesis and
Analysis of Gas/Polymer
Solutions for Ultra-Microcellular Plastics
Production,"
Proceedings of the 1993 NSF Design and
Manufacturing Systems Conference,
pp. 315-326, Charlotte, NC, 1993.
4. C.B. Park and N.P. Suh,
"Extrusion of Microcellular Polymers Using a
Rapid Pressure Drop
Device,"
SPE, ANTEC Technical Papers,
Vol. 39, pp. 1818-1822, 1993.
5. C.B. Park, D.F. Baldwin,
and N.P. Suh,
"Cell Nucleation by Rapid Pressure Drop in
Continuous
Processing of Microcellular Plastics,"
In: Use
of Plastics and Plastic Composites:
Materials and Mechanics Issues,
MD-Vol.
46, V.K. Stokes, ed.,
ASME, New York, pp. 537-552, 1993.
6. (Best 5 Technical Papers)
D.F. Baldwin, C.B. Park, and N.P. Suh,
"A Comparison of the Microcellular
Processing
of Semi-Crystalline and Amorphous
Poly(ethylene Terephthalate),"
SPE, ANTEC Technical Papers,
Vol. 40, pp. 1951-1958, 1994.
7.
C.B. Park, D.F. Baldwin,
and N.P. Suh,
"Formation and Application of Polymer/Gas
Mixtures in
Continuous Processing of Microcellular
Polymers,"
Cellular
and Microcellular Materials,
V. Kumar and K.A. Sealer, eds.,
ASME, New York,
pp. 109-124, 1994.
8. D.F. Baldwin, C.B. Park,
and N.P. Suh,
"A Processing System for the Extrusion of
Microcellular
Polymer Sheets: Shaping and Cell
Growth Control,"
Cellular
and Microcellular Materials,
V. Kumar and K.A. Sealer,
eds., ASME, New York,
pp. 85-107, 1994.
9. L. Matuana-Malanda, C.B.
Park, and
J.J. Balatinecz,
"Characterization of Microcellular
PVC/Wood-Fiber Composites,"
SPE, ANTEC
Technical Papers,
Vol. 41, pp. 2394-2399, 1995.
10. S. Doroudiani, C.B. Park,
M.T. Kortschot,
and L.K. Cheung,
"Effect of Morphology on Microcellular
Foaming of
Semi-Crystalline Polymers,"
SPE, ANTEC
Technical Papers,
Vol. 41, pp. 2183-2188, 1995.
11. D.F. Baldwin, C.B. Park,
and N.P. Suh,
"An Axiomatic Approach to the Design of a
Continuous
Microcellular Polymer Processing
System II: Shaping and Cell Growth
Control,"
Concurrent Product and
Process Engineering,
ASME, New York, pp. 267-277, 1995.
12. (Best 5 Technical Papers)
L. Matuana-Malanda, C.B. Park, and J.J. Balatinecz,
"Production of
Microcellular Foamed
PVC/Wood-Fiber Composites: Processing and Cell
Morphology
Relationships,"
SPE, ANTEC Technical Papers,
Vol. 42, pp. 1900-1907, 1996.
13. S. Doroudiani, C.B. Park,
and
M.T. Kortschot,
"Characterization of Microcellular Foamed
HDPE/PP
Blends,"
SPE, ANTEC Technical Papers,
Vol. 42, pp. 1914-1919, 1996.
14. L.K. Cheung, C.B. Park, and
A.H. Behravesh,
"Effect of Branched Structure on the Cell
Morphology of
Extruded Polypropylene Foams
I: Cell Nucleation,"
SPE, ANTEC
Technical Papers,
Vol. 42, pp. 1941-1947, 1996.
15. A.H. Behravesh, C.B. Park,
L.K. Cheung,
and R.D. Venter,
"Extrusion of Polypropylene Foams with
Hydrocerol
and Isopentane,"
SPE, ANTEC
Technical Papers,
Vol. 42, pp. 1862-1867, 1996.
16. J.L. Mulrooney, C.B. Park,
and
R.G. Fenton,
"Microcellular Foaming of Poly(methyl
methacrylate) with
Water: A Preliminary
Investigation,"
CSME,
13th Symposium on Engineering
Applications
of Mechanics:
Manufacturing Science and Engineering,
pp. 93-99, 1996.
17. G. Zak, A.Y.F. Chan, C.B.
Park,
D.F. James, and B. Benhabib,
"Rapid Layered Manufacturing of
Short-Fiber-Reinforced Parts: Investigation of
Material Properties,"
CSME, 13th Symposium on Engineering
Applications of Mechanics:
Manufacturing
Science and Engineering,
pp. 458-464, 1996.
18. A.H. Behravesh, C.B. Park,
M. Pan,
and R.D. Venter,
"Effective Suppression of Cell Coalescence
during
Shaping in the Extrusion of Microcellular
HIPS Foams,"
212th National ACS
Meeting, Polymer Preprints,
Vol. 37,
No. 2, pp. 767-768, 1996.
19. G. Zak, N.M. Sela, C.B.
Park,
and B. Benhabib,
"A Stereolithography Method for the Rapid
Manufacture of Glass-Fiber-Reinforced
Composites,"
ASME, IMECE, Design
for Manufacturing
and Assembly,
DE-Vol. 89, pp. 29-36, 1996.
20. A.H. Behravesh, C.B. Park,
and
R.D. Venter,
"Extrusion of Low-Density, Microcellular HIPS
Foams Using
CO2,"
Cellular and
Microcellular Materials,
V. Kumar and K.A. Sealer, eds., ASME, New York,
pp.
47-64, 1996.
21. L.K. Cheung and C.B. Park,
"Effect of Talc on the Cell-Population Density of
Extruded Polypropylene
Foams," In: Cellular and
Microcellular Materials,
V. Kumar and K.A. Sealer, eds., ASME, New York,
pp.
81-103, 1996.
22. L.M. Matuana, C.B. Park,
and
J.J. Balatinecz,
"Effect of Cell Morphology on the Properties of
Microcellular Foamed PVC/Wood-Fiber
Composites,"
Cellular
and Microcellular Materials,
V. Kumar and K.A. Sealer, eds., ASME, New York,
pp. 1-16, 1996.
23. (Best 5 Technical Papers)
M. Lee, C.B. Park, and C. Tzoganakis,
"On-Line Measurement of PS/CO2
Solution
Viscosities,"
SPE, ANTEC
Technical Papers,
Vol. 43, pp. 1991-1995, 1997.
24. S. Doroudiani, M.T.
Kortschot, and
C.B. Park,
"Structure and Mechanical Properties Study of
Foamed Wood-Fiber/Polyethylene Composites,"
SPE, ANTEC
Technical Papers,
Vol. 43, pp. 2046-2050, 1997.
25. L.M. Matuana, J.J.
Balatinecz, and
C.B. Park,
"Influence of Plasticizer on the Melt Flow and
Mechanical Properties of PVC/Newsprint-Fiber
Composites, “
SPE, ANTEC
Technical Papers,
Vol. 43, pp. 3580-3585, 1997.
26. (Best Thesis Paper Award)
L.M. Matuana, J.J. Balatinecz, and C.B. Park,
"Evaluation of Adhesion
between PVC and
Surface-Treated Wood Veneer Laminates,"
SPE, ANTEC
Technical Papers,
Vol. 43, pp. 3568-3573, 1997.
27. C.B. Park, M. Pan, and A.K.
Yeung,
"Microcellular Processing of Low-Density PS Foams
in
Extrusion,"
Cellular Polymers IV,
Paper
13, pp. 1-5, 1997.
28. G. Liu, C.B. Park, and J.A.
Lefas,
"Rotational Molding of Low-Density LLDPE Foams,"
CAE
and Intelligent Processing of Polymeric
Materials,
H.P. Wang, L.-S. Turng,
and J.-M. Marchal, eds.,
MD-Vol. 79, ASME, NY, pp. 33-49, 1997.
29. G. Zak, N.M. Sela, C.B.
Park, and
B. Benhabib,
"A Layered-Manufacturing Process for the
Fabrication
of Glass-Fiber-Reinforced Composites,"
The 8th Solid Freeform Fabrication
Symposium, pp.
17-24 (1997).
30. G. Liu, C.B. Park, and J.A.
Lefas,
"Dry-Blended Rotomolding Technology for
Producing Low-Density LLDPE
Foams,"
SPE, ANTEC Technical Papers,
Vol.
44, pp. 1822-1831, 1998.
31. L.M. Matuana, R.T. Woodhams,
C.B. Park,
and J.J. Balatinecz,
"Influence of Interfacial Interactions on
the
Properties of PVC/Cellulosic Fiber Composites,”
SPE, ANTEC
Technical Papers,
Vol. 44, pp. 3313-3318, 1998.
32. L.M. Matuana, C.B. Park,
and
J.J. Balatinecz,
"Characterization of Microcellular Foamed
Plastic/Cellulosic
Fiber Composites,"
SPE, ANTEC
Technical Papers,
Vol. 44, pp. 1968-1974, 1998.
33. M. Lee, C. Tzoganakis, and
C.B. Park,
"Effects of Supercritical Carbon Dioxide on PE/PS
Blend
Viscosity and Morphology,"
SPE, ANTEC
Technical Papers,
Vol. 44, pp. 2570-2574, 1998.
34. M. Lee, C.B. Park, and
C.
Tzoganakis,
"Modeling of PS/Supercritical CO2
Solution
Viscosities,"
SPE, ANTEC
Technical Papers,
Vol. 44, pp. 1902-1906, 1998.
35. A.H. Behravesh, C.B. Park,
and
R.D. Venter,
"Approach to the Production of Low-Density,
Microcellular
Foams In Extrusion,"
SPE, ANTEC
Technical Papers,
Vol. 44, pp. 1958-1967, 1998.
36. C.B. Park, A.H. Behravesh,
and
R.D. Venter,
"Challenge to the Production of Low-Density,
Fine-Cell
HDPE Foams,"
FoamPlas '98, pp. 259-276, 1998.
37. V. Yevko, G. Zak, C.B.
Park, T. Coyle,
and B. Benhabib,
"Laser-Beam Fusion of Predeposited Metal
for
Layered Manufacturing - Modeling, Simulation,
and Experiment,"
ASME
Design Engineering Technical Conferences,
Paper # DAC5564 (CD-ROM), 1998.
38. (Invited) L.M. Matuana and
C.B. Park,
"Effects of Additives and Compatibilizing Agents on
the
Processability and Performance of
PVC/Wood-Fiber Composites,"
Third
International Conference Compounding '98:
Advances in Plastics Compounding for
Performance
and Profit,
Paper# 9, 1998.
39. R. Pop-Iliev, G. Liu, F.
Liu, C.B. Park,
S. D'Uva, and J.A. Lefas,
"Comparison of Dry Blending Based
and Melt
Compounding Based Rotomolding Techniques for
LLDPE Foams,"
SPE, ANTEC Technical Papers,
Vol. 45, pp. 1457-1467, 1999.
40. S.S. Park, C.B. Park, D.
Ladin,
H.E. Naguib and C. Tzoganakis,
"On-Line Measurement of Polymer Melt
Specific
Volume Using a Gear Pump,”
SPE, ANTEC,
Technical Papers,
Vol. 45, pp.
2471-2478, 1999.
41. (Best 5 Technical Papers)
G. Rizvi,
L.M. Matuana, and C.B. Park,
"Foaming of PS/Wood-Fiber Composites
in
Extrusion Using Moisture as a Blowing Agent,"
SPE, ANTEC,
Technical Papers,
Vol. 45, pp.
2040-2048, 1999.
42. M. Lee, C. Tzoganakis, and
C.B. Park,
"Extrusion of PE/PS Blends with Supercritical CO2
in a Twin-Screw Extruder and a Twin/Single
Tandem System,"
SPE, ANTEC,
Technical Papers,
Vol. 45, pp. 2806-2810, 1999.
43. M. Lee, C.B. Park, C.
Tzoganakis,
and H.E. Naguib,
"Comparison of Various Viscosity Models for
PS/CO2 Solutions,"
SPE, ANTEC,
Technical Papers,
Vol. 45, pp.
1241-1246, 1999.
44. G. Rizvi, H. Zhang, and C.B.
Park,
"Fine-Celled Foaming of PS/Wood-Fiber
Composites,"
5th
International Conference on
Woodfiber-Plastic Composites,
Madison,
Wisconsin, 1999.
45. (invited)
R. Pop-Iliev, G.
Liu, F. Liu, C.B. Park,
S. D'Uva, and J.A. Lefas,
"Rotational Foam Molding
of Polyethylene
and Polypropylene,"
SPE, RETEC,
Innovations in Rotational
Molding in the Year 2000 and Beyond,
pp. 95-104,
Strongsville, Ohio, June 1999.
46. M. Lee, C. Tzoganakis, and
C.B. Park,
"Morphology of PS/LDPE/Supercritical CO2
Blends
in a Tandem Extrusion System,"
Polymer Processing Society, 15th
Annual Meeting,
'S-Hertogenbosch, Netherlands, June 1999.
47. G. Zak, M. Haberer, C.B.
Park
and B. Benhabib,
"Short-Fiber-Reinforced Lithography Parts
-
Estimation of
Mechanical Properties,"
8th European Conference on Rapid
Prototyping
& Manufacturing,
Nottingham, UK, July 1999.
48. C.B. Park, Y. Liu, and H.E.
Naguib,
"Challenge to Forty-fold Expansion of
Biodegradable Polyester Foams
Using CO2,"
Foams '99,
pp.
35-54, Parsippany, NJ, October 1999.
49. M. Lee, C. Tzoganakis, C.B.
Park,
"Extrusion of Polymer Blends in the Presence
of Supercritical CO2"
Polyblends 99,
pp. 381-389,
Boucherville, Quebec, Oct.13-15.
50. R. Pop-Iliev, C.B. Park, G.
Liu, and F. Liu,
"Control of the Melt Strength of Polypropylene in
Rotational Foam Molding,"
SPE, ANTEC,
Technical Papers, 2000,
submitted.
51. R. Pop-Iliev and C.B. Park,
"Processing of Polypropylene Foams in
Compounding-based Rotational Foam
Molding,"
SPE, ANTEC, Technical Papers, 2000,
submitted.
52. S.S. Park, C.B. Park, D.
Ladin,
H.E. Naguib and C. Tzoganakis,
"Measurement of the PVT Properties of
a
Polymer/Gas Solution Using a Foaming Extruder
and a Gear Pump,”
SPE, ANTEC, Technical Papers, 2000,
submitted.
53. D. Ladin, C.B. Park, S.S.
Park,
and H.E. Naguib,
"Measurements and Modeling of the Rheological
Properties of PBS/CO2
Solutions,"
SPE, ANTEC, Technical Papers, 2000,
submitted.
54. H.E. Naguib, S.-W. Song,
and C.B. Park,
"Effect of Supercritical CO2
and N2 on
Crystallization of Linear
and Branched Propylene
Resins Filled with Foaming Agents,"
SPE, ANTEC,
Technical Papers, 2000,
submitted.
55. H.E. Naguib and C.B. Park,
"A Study of Melt Fracture of Linear and
Branched Propylene/Butane Solutions
with Foaming Additives,"
SPE, ANTEC,
Technical Papers, 2000,
submitted.
56. G. Zak, C.B. Park and B.
Benhabib,
"Axiomatic Design of a Layered Composites
Manufacturing
System,"
International Conference on Axiomatic Design
(ICAD 2000), MIT,
Cambridge, Massachusetts,
June 21-23, 2000, abstract submitted.
57. C.B. Park, R. Pop-Iliev,
and S.S. Park,
"Introducing a CAD/CAM Laboratory to Support an
Undergraduate Course in Manufacturing
Engineering,"
teaching paper
completed, to be submitted.
To
return to beginning of this page click on
Contents
1. N.P. Suh, D.F. Baldwin, C.B.
Park,
S.W. Cha, D. Tate, T. Ota, and J. Yang,
"Synthesis and Analysis of
Gas/Polymer
Solutions for Ultra-Microcellular Plastics Prod
uction,"
Poster
Session of NSF Design and
Manufacturing
Systems Conference,
Massachusetts Institute of Technology,
Cambridge, MA,
February 1994.
2. L. Matuana-Malanda, C.B.
Park,
and J.J. Balatinecz,
"Microcellular Foams of Wood -Fiber Reinforced
PVC Composites,"
Proceedings of the
Eleventh Annual Conference on
Forestry and Environmental Sciences (CONFOR'95),
44, Toronto, Ontario, February 1995.
3. L. Matuana-Malanda, J.J.
Balatinecz,
and C.B. Park, "Microcellular Foams of
WoodFiber-Plastic
Composites,"
Proceedings of the
WoodFiber-Plastic
Composites Conference of the Forest Products
Society,
USDA
Forest Service, Madison, Wisconsin,
May 1995.
4. A.H. Behravesh, C.B. Park,
and R.D. Venter,
"Extrusion of Low-Density, Microcellular HIPS
Foams,"
CANCAM Proceedings, 16th Canadian
Congress of Applied Mechanics,
pp. 555-556,
1997.
5. L.K. Cheung and C.B. Park,
"Effect of Talc on the Cell-Population Density of
Extruded Polypropylene
Foams,"
ASME, IMECE, Advanced
Materials: Development,
Characterization, Processing, and Mechanical
Behavior, MD-
Vol. 74, 207-208, 1996.
6. L.M. Matuana, C.B. Park,
and J.J. Balatinecz,
"Effect of Cell Morphology on the Properties
of
Microcellular Foamed PVC/Wood-Fiber
Composites,"
ASME, IMECE, Advanced
Materials: Development,
Characterization, Processing, and Mechanical
Behavior, MD-
Vol. 74, 199-200, 1996.
7. A.H. Behravesh, C.B. Park,
and R.D. Venter,
"Extrusion of Low-Density, Microcellular HIPS Foams Using
CO2,"
ASME, IMECE, Advanced Materials:
Development,
Characterization, Processing, and Mechanical
Behavior, MD-
Vol. 74, 189-190, 1996.
8. C.B. Park, L.M. Matuana,
and J.J. Balatinecz,
"Processing-Structure-Property Relationships
for
Microcellular Foamed PVC/Wood-Fiber
Composites,"
The Polymer Processing
Society,
13th Annual Meeting, Paper
3-V, 1997.
9. A.H. Behravesh, C.B. Park,
and R.D. Venter,
"Production of Low-Density, Microcellular HIPS
Foams In
Extrusion,"
3rd International Mechanical Engineering
Conference, Tehran,
Iran, May 1998.
10. C.B. Park, A.H. Behravesh,
and R.D. Venter,
"Extrusion Microcellular Foam Processing
of PS and
HIPS,"
Polymer Processing Society, 14th
Annual Meeting,
419-420, 1998.
11. C.B. Park, M. Lee, and C.
Tzoganakis,
"Measurements and Modeling of PS/Supercritical
CO2
Solution Viscosities,"
Polymer Processing Society, 14th Annual Meeting,
pp. 277-278, 1998.
12. M. Lee, C. Tzoganakis, and
C.B. Park,
"Extrusion of PE, PS, and their blends with
Supercritical Carbon
Dioxide,"
Polymer Processing Society, 14th
Annual Meeting,
pp. 495-496, 1998.
13. C.B., Park, G. Liu, F. Liu,
and J.A. Lefas,
"Rotomolding of Low-Density, Fine-Cell LLDPE
Foams,"
Polymer Processing Society, North American
Meeting, pp. 153-154, 1998.
14. M. Lee, C. Tzoganakis, and
C.B. Park,
"Extrusion of PE/PS blends with Supercritical
Carbon
Dioxide,"
Polymer Processing Society,
North
American Meeting, pp. 92-93, 1998.
15. M. Lee, C. Tzoganakis, and
C.B. Park,
"On-Line Measurements of PS/Supercritical CO2
Solution Viscosities,"
48th Canadian
Chemical Engineering Conference,
London, Ontario, 1998.
16. M. Lee, C. Tzoganakis, and
C.B. Park,
"Extrusion of Binary Polymer Blends with
Supercritical Carbon
Dioxide,"
1998 AIChE Annual Meeting,
Paper #113D, 1998.
17. M. Lee, C. Tzoganakis, and
C.B. Park,
"Reactive Polymer Blending in the Presence of
Supercritical
Carbon Dioxide,"
49th Canadian
Chemical Engineering Conference,
Saskatoon, Saskatchewan, October 1999.
To
return to beginning of this page click on
Contents
Graduate
Thesis Supervised
(Co-supervised +)
1. L.M. Matuana,
Ph.D. Thesis+,
"Wood Fiber/Polyvinyl Chloride Composites
and Their Microcellular
Foams,"
Faculty of Forestry,
University of Toronto,
May 1997.
2. A.H. Behravesh,
Ph.D.
Thesis+,
"Extrusion Processing of
Low-Density,
Microcellular Foams,"
Department of Mechanical and Industrial
Engineering,
University of Toronto,
January 1998.
3. G. Zak,
Ph.D. Thesis+,
"Rapid Layered Manufacturing of
Short-Fibre-Reinforced Parts,"
Department of Mechanical and Industrial
Engineering,
University of Toronto,
December 1998.
4. J.L. Mulrooney,
M.A.Sc.
Thesis+,
"An Investigation of a Sorption Apparatus to
Measure the
Solubility and Diffusivity of a Liquid
Blowing Agent in a Polymer at an Elevated
Pressure,"
Department of Mechanical Engineering,
University of Toronto,
October 1995.
5. K.K. Cheung,
M.A.Sc.
Thesis,
"Processing of Fine-Cell PP Foams in Extrusion,"
Department of
Mechanical and Industrial Engineering,
University of Toronto,
April 1996.
6. V. Yevko,
M.A.Sc. Thesis+,
"Cladding Formation in Laser-Beam
Fusion of Metal Powder,"
Department
of Mechanical and Industrial
Engineering,
University of Toronto,
December 1997.
7. A.K. Yeung,
M.A.Sc. Thesis,
"Development of Microcellular Foam Sheet
Extrusion Systems,"
Department of Mechanical and Industrial
Engineering,
University of Toronto,
May
1998.
8. F. Liu,
M.A.Sc. Thesis,
"Processing of Polyethylene and Polypropylene
Foams in Rotational
Molding,"
Department of Mechanical and Industrial
Engineering,
University
of Toronto,
June 1998.
9. R. Pop-Iliev,
M.A.Sc.
Thesis,
"Processing of Fine-Cell Polypropylene Foams in
Compounding-Based
Rotational Foam Molding,"
Department of Mechanical and Industrial
Engineering,
University of Toronto,
January 1999.
10. G. Rizvi,
M.A.Sc. Thesis,
"Extrusion Foaming of Plastic/Wood-Fiber
Composites Using a Chemical
Blowing Agent,"
Department of Mechanical and Industrial
Engineering,
University of Toronto,
January 1999.
11. D. Ladin,
M.A.Sc. Thesis,
"Study of the Rheological Properties of
Polymer/Gas Solutions Based on a
Foam Extrusion
System,"
Department of Mechanical and Industrial
Engineering,
University of Toronto,
June 1999.
12. S.S. Park,
M.A.Sc. Thesis,
"On-Line Measurement of the PVT Properties of
Polymer/CO2
Solutions Using a Gear Pump,"
Department of Mechanical and Industrial
Engineering,
University of Toronto,
June 1999.
13. D. Paidar,
M.Eng. Project
Report+,
"Design of a Sorption System for the Measurement
of
Solubility and Diffusivity of Water in Polymers,"
Department of Mechanical
Engineering,
University of Toronto,
January 1994.
14. A.Y.F. Chan,
M.Eng. Project
Report+,
"Viscosity Analysis for Short Glass-Fiber and
Photopolymer
Mixtures for a Stereolithography
System,"
Department of Mechanical
Engineering,
University of Toronto,
October 1995.
15. M. Pan,
M.Eng. Project
Report,
"Extrusion of Microcellular PS Filament and
Fine-Cell, Low-Density
PS Sheet,"
Department of Mechanical and Industrial
Engineering,
University
of Toronto,
December 1996.
16. D. Abeygunawardana,
M.Eng.
Project Report,
"Rotational Molding Machine Design Using
Axiomatic Design
Concept,"
Department of Mechanical and Industrial
Engineering,
University
of Toronto,
December 1996.
17. D. Fernandes,
M.Eng.
Project Report,
"Measurement of the Rheological Properties of High
Density
Polyethylenes,"
Department of Mechanical and Industrial
Engineering,
University of Toronto,
September 1997.
18. O. Kornienko,
M.Eng.
Project Report+,
"A NURBS Based Approach to Direct Slicing of Solid
Models
for Rapid Prototyping,"
Department of Mechanical and Industrial
Engineering,
University of Toronto,
January 1998.
19. I. Naguib,
M.Eng. Project
Report+,
"Determination of Optimal Orientation and Direct
Slicing
of Glass Fiber Reinforced Stereolithography
Parts,"
Department of
Mechanical and Industrial
Engineering,
University of Toronto,
January 1998.
20. T. Chow,
M.Eng. Project
Report+,
"Design of the Powder Composition Control and
Delivery
System for Laser Fusion Deposition,"
Department of Mechanical and
Industrial
Engineering,
University of Toronto,
January 1998.
To
return to beginning of this page click on
Contents
INVITED LECTURES, SEMINARS, AND PRESENTATIONS
1. C.B. Park,
"Extrusion
of Microcellular Foamed Filaments,"
Korean Explosive Group,
Research and
Engineering Center,
Daejeon, Korea, August 1991 (invited).
2. C.B. Park,
"The Role
of Polymer/Gas Solutions in Continuous
Processing of Microcellular
Plastics,"
Iowa State University,
Department of Industrial and
Manufacturing
Systems Engineering,
Ames, Iowa, February 1993 (invited).
3. C.B. Park,
"Continuous
Processing of Microcellular Plastics,"
The Association of Korean-Canadian
Scientists and
Engineers,
Toronto, Ontario, Canada,
September 1993 (invited).
4. C.B. Park,
"Continuous
Processing of Microcellular Foamed
Polystyrene,"
Lily Cups Inc.,
Scarborough, Ontario,
July 1994.
5. C.B. Park,
"Continuous
Processing of Microcellular Foamed
Plastics,"
Horizon Plastics Company
Ltd.,
Cobourg, Ontario,
July 1994.
6. C.B. Park,
"Extrusion
of Microcellular Polymers,"
James River Corporation,
Neenah, Wisconsin,
August 1994 (invited).
7. C.B. Park,
"Processing
of Microcellular Plastics,"
WedTech Inc.,
Toronto, Ontario,
October 1994.
8.