Maro Publications

Tchir Journal Issues 2011 Archive

Hit Counter

3/15/2012

 

AIChE
Chemical Engineering
Chemical Engineering Communications
Chemical Engineering and Processing
Chemical Engineering Progress
Chemical Engineering Science
Industrial & Engineering Chemistry Research

December 2011

November 2011

October 2111

September 2011

August

July

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx   

December 2011

AIChE Journal 57 #12 (2011)
(Titles and Abstracts) (T)

Development of a new technique to generate microcapsules from the breakup of non-Newtonian highly viscous fluid jets
(pages 3436–3447)
 AIChE Journal 57 #12 (2011)

Flow accelerates adhesion between functional polyethylene and polyurethane
(pages 3496–3506)
 AIChE Journal 57 #12 (2011)

Synthesis of the artemisinin-imprinting polymers on silica surface and its adsorption behavior in supercritical CO2 fluid
(pages 3514–3521)
AIChE Journal 57 #12 (2011)

Nonlinear dynamic behavior of nonisothermal film blowing process under the condition of constant bubble pressure
(pages 3565–3570)
 AIChE Journal 57 #12 (2011)

Friday 12/16/2011

Industrial & Engineering Chemistry Research 50 #24 (2011)
(Titles and Abstracts) (T)

Rice Husk and Its Ash as Low-Cost Adsorbents in Water and Wastewater Treatment
(
13589–13613)  Industrial & Engineering Chemistry Research 50 #24 (2011)

Design of Molecular Imprinted Hydrogels for Controlled Release of Cisplatin: Evaluation of Network Density of Hydrogels
(
13742–13751) Industrial & Engineering Chemistry Research 50 #24 (2011)

Release of Thyme Oil from Polylactide Microcapsules
(
13752–13761)  Industrial & Engineering Chemistry Research 50 #24 (2011)

Size Control of Chitosan Capsules Containing Insulin for Oral Drug Delivery via a Combined Process of Ionic Gelation with Electrohydrodynamic Atomization
(
13762–13770)  Industrial & Engineering Chemistry Research 50 #24 (2011)

Crystallization Kinetics of Linear and Long-Chain-Branched Polylactide
(13789–13798) Industrial & Engineering Chemistry Research 50 #24 (2011)

tion of Roxithromycin-Loaded Poly(l-lactic Acid) Films with Supercritical Solution Impregnation
(13813–13818) Industrial & Engineering Chemistry Research 50 #24 (2011)

Influence of Nanoclay Concentration on the CO2 Diffusion and Physical Properties of PMMA Montmorillonite Microcellular Foams
(
13819–13824) Industrial & Engineering Chemistry Research 50 #24 (2011)

Synthesis of Mesoporous Carbons from Bituminous Coal Tar Pitch Using Combined Nanosilica Template and KOH Activation
(
13825–13830) Industrial & Engineering Chemistry Research 50 #24 (2011)

Design of Aerosol Coating Reactors: Precursor Injection
(
13831–13839) Industrial & Engineering Chemistry Research 50 #24 (2011)

Ultrasonic Irradiation Enhanced Cell Nucleation in Microcellular Poly(lactic Acid): A Novel Approach to Reduce Cell Size Distribution and Increase Foam Expansion
(
13840–13847) Industrial & Engineering Chemistry Research 50 #24 (2011)

Preparation of Nickel Nanoparticles in Spherical Polyelectrolyte Brush Nanoreactor and Their Catalytic Activity
(13848–13853) Industrial & Engineering Chemistry Research 50 #24 (2011)

Morphology and Properties of Thermoplastic Sugar Beet Pulp and Poly(butylene adipate-co-terepthalate) Blends
(
13859–13865) Industrial & Engineering Chemistry Research 50 #24 (2011)

Molecular Docking Simulations for Macromolecularly Imprinted Polymers
(
13877–13884) Industrial & Engineering Chemistry Research 50 #24 (2011)

Morphology, Crystallization Behavior, and Dynamic Mechanical Properties of Biodegradable Poly(ε-caprolactone)/Thermally Reduced Graphene Nanocomposites
(
13885–13891) Industrial & Engineering Chemistry Research 50 #24 (2011)

Adsorption Interaction of Tetracyclines with Porous Synthetic Resins
(
13892–13898) Industrial & Engineering Chemistry Research 50 #24 (2011)

Simulation of Electrodialysis with Bipolar Membranes: Estimation of Process Performance and Energy Consumption
(
13911–13921) Industrial & Engineering Chemistry Research 50 #24 (2011)

Performance Evaluation of Poly(amide-imide) Incorporated Cellulose Acetate Ultrafiltration Membranes in the Separation of Proteins and Its Fouling Propensity by AFM Imaging
(
14016–14029) Industrial & Engineering Chemistry Research 50 #24 (2011)

Anionic Dye Adsorption on Chemically Modified Ordered Mesoporous Carbons
(
14070–14083) Industrial & Engineering Chemistry Research 50 #24 (2011)

Combustion Characteristics of an Al/H2O Mixture with Polyoxyethylene
(
14136–14141) Industrial & Engineering Chemistry Research 50 #24 (2011)

Rheological Investigation of Prunus Sp. Gums in Aqueous Medium
(
14148–14154) Industrial & Engineering Chemistry Research 50 #24 (2011)

Rheological Percolation Behavior and Isothermal Crystallization of Poly(butyene Succinte)/Carbon Nanotube Composites
(
14186–14192) Industrial & Engineering Chemistry Research 50 #24 (2011)

Thursday 12/15/2011

  Chemical Engineering Progress 107 #12 (2011)
(Titles and Abstracts) (T)
Trade Journal AIChE Journal 58 #11 (2012)
(Titles and Abstracts) (T)

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

Equilibrium and kinetics of vancomycin adsorption on polymeric adsorbent
(99–106)
AIChE Journal 58 #11 (2012)

Power-law polymer solution flow in a converging annular spinneret: Analytical approximation and numerical computation
(122–131)
AIChE Journal 58 #11 (2012)

Interaction of water soluble chitosan with multiwalled carbon nanotubes (pages 285–291)

Calculation of the solubility of liquid solutes in glassy polymers
(292–301)
AIChE Journal 58 #11 (2012)

Wednesday 12/7/2011

10.  Industrial & Engineering Chemistry Research 50 #23 (2011)
(Titles and Abstracts) (T)

Integrated Multiscale Methodology for Virtual Prototyping of Porous Catalysts
(12904–12914)  
Industrial & Engineering Chemistry Research 50 #23 (2011)

Controlled Crystallization of Macromolecules using Patterned Substrates in a Sandwiched Plate Geometry
(12984–12989)  
Industrial & Engineering Chemistry Research 50 #23 (2011)

Biomimicked Superhydrophobic Polymeric and Carbon Surfaces
(13012–13020)  
Industrial & Engineering Chemistry Research 50 #23 (2011)

Polymer-Functionalized Nanoparticles for Improving Waterflood Sweep Efficiency: Characterization and Transport Properties
(13030–13036)  
Industrial & Engineering Chemistry Research 50 #23 (2011)

Influence of Shear Thinning on Viscoelastic Fluid–Structure Interaction in a Two-Dimensional Collapsible Channel
(13161–13168)  
Industrial & Engineering Chemistry Research 50 #23 (2011)

Novel Interpenetrating Polymer Network Hydrogel Microspheres of Chitosan and Poly(acrylamide)-grafted-Guar Gum for Controlled Release of Ciprofloxacin
(13280–13287)  
Industrial & Engineering Chemistry Research 50 #23 (2011)

Thorium(IV) Removal and Recovery from Aqueous Solutions using Tannin-Modified Poly(glycidylmethacrylate)-Grafted Zirconium oxide Densified Cellulose
(13288–13298)  
Industrial & Engineering Chemistry Research 50 #23 (2011)

Fast-Rate–Constant-Rate Oxidation Kinetics Model for Asphalt Binders
(13373–13379)  
Industrial & Engineering Chemistry Research 50 #23 (2011)

Supercritical Carbon Dioxide Induced Foaming of Highly Oriented Isotactic Polypropylene
(13387–13395)  
Industrial & Engineering Chemistry Research 50 #23 (2011)

Characterization of Jack Pine Early- and Latewood Fibers in Thermomechanical Pulping
(13396–13402)  
Industrial & Engineering Chemistry Research 50 #23 (2011)

A Superstructure Optimization Approach for Membrane Separation-Based Water Regeneration Network Synthesis with Detailed Nonlinear Mechanistic Reverse Osmosis Model
(13444–13456)  
Industrial & Engineering Chemistry Research 50 #23 (2011)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Tuesday 12/6/2011

Chemical Engineering (December 2011)
(Titles and Abstracts) (T)
Trade Journal

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

 Chemical Engineering and Processing 50, #10 (2011)
(Titles and Abstracts) (T)

Villermaux–Dushman protocol for experimental characterization of micromixers
( 979-990) Chemical Engineering and Processing 50, #10 (2011)

Hydrodynamics and mass transfer in carbon-nanofiber/graphite-felt composite under two phase flow conditions
(1108-1114) Chemical Engineering and Processing 50, #10 (2011)

....................................................................................................

Chemical Engineering and Processing 50, #11-12 (2011)
(Titles and Abstracts) (T)

Process intensification of encapsulation of functionalized CaCO3 nanoparticles using ultrasound assisted emulsion polymerization
(1160-1168) Chemical Engineering and Processing 50, #11-12 (2011)

Numerical investigation of Membrane Dephlegmation: A hybrid pervaporation–distillation process for ethanol recovery
(1226-1236) Chemical Engineering and Processing 50, #11-12 (2011)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx   

November 2011

Wednesday 11/9/2011

 Industrial & Engineering Chemistry Research 50 #22 (2011)
(Titles and Abstracts) (T)

Controlled Size Silver Nanoparticles Synthesis with Water-in-Oil Microemulsion Method: A Topical Review
(12311–12323)
Industrial & Engineering Chemistry Research 50 #22 (2011)

Fractionation of Lignocellulosic Materials with Ionic Liquids. 1. Effect of Mechanical Treatment
(12349–12357)
Industrial & Engineering Chemistry Research 50 #22 (2011)

Temperature-Swing Adsorption of Proteins in Water Using Cationic Copolymer-Grafted Silica Particles
(12358–12365)
Industrial & Engineering Chemistry Research 50 #22 (2011)

Modeling of Dye Uptake Rate, Related Interactions, and Binding Energy Estimation in Leather Matrix using Protein Based Nanoparticle Polymer
(12400–12408)
Industrial & Engineering Chemistry Research 50 #22 (2011)

Morphological Evolution from SnO2 Quantum Dots to Quantum Chains inside Channels of Mesoporous Spheres
(12542–12547)
Industrial & Engineering Chemistry Research 50 #22 (2011)

Effect of Organoclay Reinforcement on Lignin-Based Carbon Fibers
(12548–12555)
Industrial & Engineering Chemistry Research 50 #22 (2011)

Polypyrrole Coated Thermally Exfoliated Graphite Nanoplatelets and the Effect of Oxygen Surface Groups on the Interaction of Platinum Catalysts with Graphene-Based Nanocomposites
(12562–12571)
Industrial & Engineering Chemistry Research 50 #22 (2011)

Isothermal and Nonisothermal Cold Crystallization Behaviors of Biodegradable Poly(l-lactide)/Octavinyl-Polyhedral Oligomeric Silsesquioxanes Nanocomposites
(12579–12586)
Industrial & Engineering Chemistry Research 50 #22 (2011)

Effects of Nonsolvent Molecular Structure and Its Content on the Formation of the Macroporous Polyarylate Layer Coated onto the Polyethylene Separator
(12596–12605)
Industrial & Engineering Chemistry Research 50 #22 (2011)

**************************************

Chemical Engineering Science 67  #1 (2012)
(Titles and Abstracts) (T)

No articles selected

**************************************

Chemical Engineering Progress 107 #11 (2011)
(Titles and Abstracts) (T)
Trade Journal

***************************************

Chemical Engineering Communications 199 #2 (2012)
(Titles and Abstracts) (T)

A Generalized Differential Transform Method for Combined Free and Forced Convective Flow about Inclined Surfaces in Porous Media
(257-282`) Chemical Engineering Communications 199 #2 (2012)
Abstract

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx   

October 2111

Monday 10/31/2011

Chemical Engineering (November 2011)
(Titles and Abstracts) (T)
Trade Journal

AIChE Journal 57 #12 (2011)
(Titles and Abstracts) (T)

Three-dimensional CFD-PBM coupled model of the temperature fields in fluidized-bed polymerization reactors
(3351–3366)
AIChE Journal 57 #12 (2011)

Flow accelerates adhesion between functional polyethylene and polyurethane
(3496–3506)
AIChE Journal 57 #12 (2011)

Synthesis of the artemisinin-imprinting polymers on silica surface and its adsorption behavior in supercritical CO2 fluid
(3514–3521)
AIChE Journal 57 #12 (2011)

Nonlinear dynamic behavior of nonisothermal film blowing process under the condition of constant bubble pressure
(3565–3570)
AIChE Journal 57 #12 (2011)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx   

Wednesday 10/26/2011

Industrial & Engineering Chemistry Research 50 #21 (2011)
(Titles and Abstracts) (T)

Novel Semi-interpenetrating Microspheres of Dextran-grafted-Acrylamide and Poly(Vinyl Alcohol) for Controlled Release of Abacavir Sulfate
(11778–11784)
Industrial & Engineering Chemistry Research 50 #21 (2011)

Origin of the Difference in Structural Behavior of Poly(acrylic acid) and Poly(methacrylic acid) in Aqueous Solution Discerned by Explicit-Solvent Explicit-Ion MD Simulations
(11785–11796)
Industrial & Engineering Chemistry Research 50 #21 (2011)

Colon Targeting of 5-Fluorouracil Using Polyethylene Glycol Cross-linked Chitosan Microspheres Enteric Coated with Cellulose Acetate Phthalate
(11797–11807)
Industrial & Engineering Chemistry Research 50 #21 (2011)

Catalytic Air Gasification of Plastic Waste (Polypropylene) in a Fluidized Bed. Part II: Effects of Some Operating Variables on the Quality of the Raw Gas Produced Using Olivine as the In-Bed Material
(11815–11821)
Industrial & Engineering Chemistry Research 50 #21 (2011)

Controllable Preparation of Poly(butyl acrylate) by Suspension Polymerization in a Coaxial Capillary Microreactor
(11853–11862)
Industrial & Engineering Chemistry Research 50 #21 (2011)

Hybrid Intumescent Coatings for Wood Protection against Fire Action
(11897–11905)
Industrial & Engineering Chemistry Research 50 #21 (2011)

Tough Thermoplastic Starch Modified with Polyurethane Microparticles: The Effects of NCO Content in Prepolymers
(11906–11911)
Industrial & Engineering Chemistry Research 50 #21 (2011)

Preparation of Hydrolyzed Electrospun Polyacrylonitrile Fiber Mats as Chelating Substrates: A Case Study on Copper(II) Ions
(11912–11921)
Industrial & Engineering Chemistry Research 50 #21 (2011)

Entrainer Effect of N,N-Dimethylformamide on Solubility of Monomers for Aromatic Polyimide in Supercritical Carbon Dioxide
(11942–11949)
Industrial & Engineering Chemistry Research 50 #21 (2011)

Enhancement of Hematite Flocculation in the Hematite–Starch–(Low-Molecular-Weight) Poly(acrylic acid) System
(11950–11953)
Industrial & Engineering Chemistry Research 50 #21 (2011)

Miscibility and Crystallization Behavior of Biodegradable Poly(butylene succinate)/Tannic Acid Blends
(11970–11974)
Industrial & Engineering Chemistry Research 50 #21 (2011)

Development and Characterization of Fire Retarded Glass-Fiber Reinforced Poly(1,4-butylene terephthalate) Composites Based on a Novel Flame Retardant System
(11975–11981)
Industrial & Engineering Chemistry Research 50 #21 (2011)

Fabrication and Characterization of TiO2 Nanotube–Epoxy Nanocomposites
(11988–11995)
Industrial & Engineering Chemistry Research 50 #21 (2011)

Effect of Nano-TiO2 Particles on the Performance of PVDF, PVDF-g-(Maleic anhydride), and PVDF-g-Poly(acryl amide) Membranes
(12113–12123)
Industrial & Engineering Chemistry Research 50 #21 (2011)

Novel Approach to Recover Natural Antioxidants from Oil Seed Meal in Ultrafiltration-Nanofiltration-Based Technique
(12124–12133)
Industrial & Engineering Chemistry Research 50 #21 (2011)

Carbon Dioxide-Selective Membranes for High-Pressure Synthesis Gas Purification
(12152–12161)
Industrial & Engineering Chemistry Research 50 #21 (2011)

Adsorption of Organic Compounds in Vapor, Liquid, and Aqueous Solution Phases on Hydrophobic Aerogels
(12177–12185)
Industrial & Engineering Chemistry Research 50 #21 (2011)

Next-Generation Modeling of Melt Blowing
(12233–12245)
Industrial & Engineering Chemistry Research 50 #21 (2011)

Radical-Mediated Graft Modification of Polyethylene Models with Vinyltrimethoxysilane: A Fundamental Study
(12246–12253)
Industrial & Engineering Chemistry Research 50 #21 (2011)

Fouling-Free Membranes Obtained by Facile Surface Modification of Commercially Available Membranes Using the Dynamic Forming Method
(12281–12284)
Industrial & Engineering Chemistry Research 50 #21 (2011)

A Highly Active and Robust Solid-Supported Polypyridylruthenium(II) Catalyst for the Oxidation of Alcohols and Alkenes by Cerium(IV) and Periodate in Water
(12288–12292)
Industrial & Engineering Chemistry Research 50 #21 (2011)

Energy Recovery from Acid–Base Neutralization Process through pH-Sensitive Polymeric Ion Exchangers
(12293–12298)
Industrial & Engineering Chemistry Research 50 #21 (2011)

Effect of Orotic Acid on the Crystallization Kinetics and Morphology of Biodegradable Poly(l-lactide) as an Efficient Nucleating Agent
(12299–12303)
Industrial & Engineering Chemistry Research 50 #21 (2011)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx   

Monday 10/17/2011

Industrial & Engineering Chemistry Research 50 #20 (2011)
(Titles and Abstracts) (T)

Preparation of Polyurethane Microencapsulated Expandable Graphite, and Its Application in Ethylene Vinyl Acetate Copolymer Containing Silica-Gel Microencapsulated Ammonium Polyphosphate
(1476–11484)  
Industrial & Engineering Chemistry Research 50 #20 (2011)

Design, Preparation, and Characterization of a Novel Hyper-Cross-Linked Polyphosphamide Polymer and Its Adsorption for Phenol
(11614–11619)  
Industrial & Engineering Chemistry Research 50 #20 (2011)

Evaluation of the Performance of Dialdehyde Cellulose Filters against Airborne and Waterborne Bacteria and Viruses
(11636–11643)  
Industrial & Engineering Chemistry Research 50 #20 (2011)

Esterification of Acetic Acid and Isobutanol in a Pervaporation Membrane Reactor Using Different Membranes
(11657–11666)  
Industrial & Engineering Chemistry Research 50 #20 (2011)

Purification of Forskolin by Adsorptive Separation Using Functionalized Polymer Bearing Specific Ligands Designed by Molecular Simulation
(11667–11676)  
Industrial & Engineering Chemistry Research 50 #20 (2011)

Adsorption of Lignocelluloses Dissolved in Prehydrolysis Liquor of Kraft-Based Dissolving Pulp Process on Oxidized Activated Carbons
(11706–11711)  
Industrial & Engineering Chemistry Research 50 #20 (2011)

Removal of Coke Particles from Oil Contaminated Marun Petrochemical Wastewater Using PVDF Microfiltration Membrane
(11712–11719)  
Industrial & Engineering Chemistry Research 50 #20 (2011)

Recycling of Waste Printed Circuit Boards by Microwave-Induced Pyrolysis and Featured Mechanical Processing
(11763–11769)  
Industrial & Engineering Chemistry Research 50 #20 (2011)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx   

Tuesday 10/11/2011

Chemical Engineering Progress 107 #10 (2011)
(Titles and Abstracts) (T)
Trade Journal AIChE Journal 57 #11 (2011)
(Titles and Abstracts) (T)

****************************************

Engineering materials layer-by-layer: Challenges and opportunities in multilayer assembly
(2928–2940)
AIChE Journal 57 #11 (2011)

Control and enhancement of permselectivity of membrane-based microcapsules for favorable biomolecular transport and immunoisolation
(3052–3062)
AIChE Journal 57 #11 (2011)

Design of gas-phase synthesis of core-shell particles by computational fluid–aerosol dynamics
(3132–3142)
AIChE Journal 57 #11 (2011)

Competition between hydrotreating and polymerization reactions during pyrolysis oil hydrodeoxygenation
(3160–3170)
AIChE Journal 57 #11 (2011)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx   

September 2011

Tuesday 9/20/2011

02.  Chemical Engineering Science 66  #22 (2011)
(Titles and Abstracts) (T)

A multi-scale approach to the physical adsorption in slit pores
(5447-5458) Chemical Engineering Science 66  #22 (2011)

Controlled peroxide-induced degradation of polypropylene in a twin-screw extruder: Change of molecular weight distribution under conditions controlled by micromixing
(5474-5486) Chemical Engineering Science 66  #22 (2011)

Numerical simulation of viscoelastic two-phase flows using openFOAM
(5487-5496) Chemical Engineering Science 66  #22 (2011)

Semi-empirical model of toluene transport in polyethylene membranes based on the data using a new type of apparatus for determining gas permeability, diffusivity and solubility
(5566-5574) Chemical Engineering Science 66  #22 (2011)

Effect of screw design on hopper drawdown of spherical particles in a horizontal screw feeder
(5585-5601) Chemical Engineering Science 66  #22 (2011)

Shear-thinning film on a porous substrate: Stability analysis of a one-sided model
( 5614-5627) Chemical Engineering Science 66  #22 (2011)

A kinetic Monte Carlo approach to diffusion in disordered nanoporous carbons
( 5663-5671) Chemical Engineering Science 66  #22 (2011)

Emergence of falsified kinetics as a consequence of multi-particle interactions in dense-phase comminution processes
(5672-5683) Chemical Engineering Science 66  #22 (2011)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx   

Tuesday 9/13/2011

AIChE Journal 57 #10 (2011)
(Titles and Abstracts) (T)

A method to calculate the multiphase flow properties of heterogeneous porous media by using network simulations
(2618–2628)
AIChE Journal 57 #10 (2011)

Fluid dynamics of flow through microscale lattice structures formed from self-propagating photopolymer waveguides
(2636–2646)
AIChE Journal 57 #10 (2011)

Assembly of uniform photoluminescent microcomposites using a novel micro-fluidic-jet-spray-dryer
(2726–2737)
AIChE Journal 57 #10 (2011)

Influence of the preparation methods on the microstructure and oxygen permeability of a CO2-stable dual phase membrane
(2738–2745)
AIChE Journal 57 #10 (2011)

Dynamic pressure-driven covalent assembly of inner skin hollow fiber multilayer membrane
(2746–2754)
AIChE Journal 57 #10 (2011)

Evaluation and fabrication of pore-size-tuned silica membranes with tetraethoxydimethyl disiloxane for gas separation
(2755–2765)
AIChE Journal 57 #10 (2011)

Phase behavior analysis for industrial polymerization reactors
(2795–2807)
AIChE Journal 57 #10 (2011)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx   

Tuesday 9/6/2011

Chemical Engineering Progress 107 #9 (2011)
(Titles and Abstracts) (T)
Trade Journal

***************************************

Chemical Engineering and Processing 50, #9 (2011)
(Titles and Abstracts) (T)

Numerical and experimental methodology for the development of a new membrane prototype intended to microfiltration bioprocesses. Application to milk filtration
(904-915) Chemical Engineering and Processing 50, #9 (2011)

****************************************

Chemical Engineering (September 2011)
(Titles and Abstracts) (T)
Trade Journal

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 

August 2011

Monday 8/22/2011

Chemical Engineering Communications 198 #12 (2011)
(Titles and Abstracts) (T)

No articles selected

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx   

Wednesday 8/10/2011

Industrial & Engineering Chemistry Research 50 #16 (2011)
(Titles and Abstracts) (T)

Incorporation of Silver Ions into Zirconium Titanium Phosphate: A Novel Approach toward Antibacterial Activity
(9479–9486)
Industrial & Engineering Chemistry Research 50 #16 (2011)

Green Thermal Analysis Technology for Evaluating the Thermal Hazard of Di-tert-butyl Peroxide
(9487–9494)
Industrial & Engineering Chemistry Research 50 #16 (2011)

Mechanism and in Vitro Release Kinetic Study of Sirolimus from a Biodegradable Polymeric Matrix Coated Cardiovascular Stent
(9539–9549)
Industrial & Engineering Chemistry Research 50 #16 (2011)

Removal Mechanisms of Toluene from Aqueous Solutions by Chitin and Chitosan
(9557–9563)
Industrial & Engineering Chemistry Research 50 #16 (2011)

Kinetics Study of 3-Methylthiophene Alkylation with Isobutylene Catalyzed by NKC-9 Ion Exchange Resin
(9609–9616)
Industrial & Engineering Chemistry Research 50 #16 (2011)

Preparation and Characterization of Sulfonated Copolyamides Based on Poly(hexafluoroisopropylidene) Isophthalamides for Polymer Electrolytic Membranes
(9617–9624)
Industrial & Engineering Chemistry Research 50 #16 (2011)

Carbon Dioxide Induced Crystallization for Toughening Polypropylene
(9632–9641)
Industrial & Engineering Chemistry Research 50 #16 (2011)

Estimating Specific Chemical Exergy of Biomass from Basic Analysis Data
(9758–9766)
Industrial & Engineering Chemistry Research 50 #16 (2011)

Effects of Starch on Latex Migration and on Paper Coating Properties
(9781–9786)
Industrial & Engineering Chemistry Research 50 #16 (2011)

********************************************

Chemical Engineering Progress 107 #8 (2011)
(Titles and Abstracts) (T)
Trade Journal

***************************************

Chemical Engineering and Processing 50, #8 (2011)
(Titles and Abstracts) (T)

A novel process for the synthesis of unsaturated polyester
( 747-756) Chemical Engineering and Processing 50, #8 (2011)

Optimization of protein encapsulation in PLGA nanoparticles
(757-765) Chemical Engineering and Processing 50, #8 (2011)

Influence of process conditions on the mean size of PLGA nanoparticles
( 846-853) Chemical Engineering and Processing 50, #8 (2011)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx   

Tuesday 8/9/2011

AIChE Journal 57 #9 (2011)
(Titles and Abstracts) (T)

Fluidization of mixtures of two solids differing in density or size
(2325–2333)
AIChE Journal 57 #9 (2011)

A property-based approach to the synthesis of material conservation networks with economic and environmental objectives
(2369–2387)
AIChE Journal 57 #9 (2011)

Modeling of two-phase polymerization of acrylamide in aqueous poly(ethylene glycol) solution
(2493–2504)
AIChE Journal 57 #9 (2011)

Oxygen mass transport limitations at the cathode of polymer electrolyte membrane fuel cells
(2505–2517)
AIChE Journal 57 #9 (2011)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx   

8/2/2011

Industrial & Engineering Chemistry Research 50 #15 (2011)
(Titles and Abstracts) (T)

A Comparison of Ammonia Borane Dehydrogenation Methods for Proton-Exchange-Membrane Fuel Cell Vehicles: Hydrogen Yield and Ammonia Formation and Its Removal
(8824–8835)
Industrial & Engineering Chemistry Research 50 #15 (2011)

Polyelectrolyte Multilayer Stamping in Aqueous Phase and Non-Contact Mode
(8851–8858)
Industrial & Engineering Chemistry Research 50 #15 (2011)

Review
Supercritical Carbon Dioxide Extraction of Molecules of Interest from Microalgae and Seaweeds
(8941–8953)
Industrial & Engineering Chemistry Research 50 #15 (2011)

Solar Energy Storage Methods
(8954–8964)
Industrial & Engineering Chemistry Research 50 #15 (2011)

Analytical Pyrolysis As a Method to Characterize Tannery Wastes
(8994–9002)
Industrial & Engineering Chemistry Research 50 #15 (2011)

Study on Formation Mechanism by Monitoring the Morphology and Structure Evolution of Nearly Monodispersed Fe3O4 Submicroparticles with Controlled Particle Sizes
(9009–9018)
Industrial & Engineering Chemistry Research 50 #15 (2011)

Biogenic Silver Nanoparticles by Cacumen Platycladi Extract: Synthesis, Formation Mechanism, and Antibacterial Activity
(9095–9106)
Industrial & Engineering Chemistry Research 50 #15 (2011)

Effects of Operational Parameters on Particle Size Distributions in Methyl Methacrylate Suspension Polymerization
(9116–9122)
Industrial & Engineering Chemistry Research 50 #15 (2011)

Preparation and Rheological Behaviors of Thermoplastic Poly(vinyl alcohol) Modified by Lactic Acid
(9123–9130)
Industrial & Engineering Chemistry Research 50 #15 (2011)

Design Simulation of Glass-Fiber-Loaded Flow in an Internally Spout-Fluidized Bed for Processing of Thermoplastic Composites. I. Flow Characterization
(9181–9196)
Industrial & Engineering Chemistry Research 50 #15 (2011)

Adsorption Thermodynamics and Kinetics of Uridine 5′-Monophosphate on a Gel-Type Anion Exchange Resin
(9270–9279)
Industrial & Engineering Chemistry Research 50 #15 (2011)

Surfactant-Template/Ultrasound-Assisted Method for the Preparation of Porous Nanoparticle Lithium Zirconate
(9295–9305)
Industrial & Engineering Chemistry Research 50 #15 (2011)

CO2 Separation from Flue Gas Using Polyvinyl-(Room Temperature Ionic Liquid)–Room Temperature Ionic Liquid Composite Membranes
(9344–9353)
Industrial & Engineering Chemistry Research 50 #15 (2011)

Improving the Adsorption of Heavy Metals from Water Using Commercial Carbons Modified with Egg Shell Wastes
(9354–9362)
Industrial & Engineering Chemistry Research 50 #15 (2011)

Mixed-Convection Flow of Nanofluids and Regular Fluids in Vertical Porous Media with Viscous Heating
(9403–9414)
Industrial & Engineering Chemistry Research 50 #15 (2011)

Pressure Drop and Residence Time Distribution in Carbon-Nanofiber/Graphite-Felt Composite for Single Liquid-Phase Flow
(9431–9436)
Industrial & Engineering Chemistry Research 50 #15 (2011)

Influence of Temperature on the Rheological Behavior of Polymer Mixtures in Solution
(9451–9455)
Industrial & Engineering Chemistry Research 50 #15 (2011)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx   

8/1/2011

Chemical Engineering (August 2011)
(Titles and Abstracts) (T)
Trade Journal

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx   

July 2011

Chemical Engineering and Processing 50, #7 (2011)
(Titles and Abstracts) (T)

Stability of lean combustion in mini-scale porous media combustor with heat recuperation
( 608-613) Chemical Engineering and Processing 50, #7 (2011)

Analysis of the drying process of a biopolymer (poly-hydroxybutyrate) in rotating-pulsed fluidized bed
(623-629) Chemical Engineering and Processing 50, #7 (2011)

Nanostructured PVDF-HFP membranes loaded with catalyst obtained by supercritical CO2 assisted techniques
(630-636) Chemical Engineering and Processing 50, #7 (2011)

*********************************************

AIChE Journal 57 #8 (2011)
(Titles and Abstracts) (T)

Laminar flow with injection through a long dead-end cylindrical porous tube: Application to a hollow fiber membrane
(1997–2006)
 
AIChE Journal 57 #8 (2011)

The effects of particle size on the mechanisms of atomization of suspensions using hydraulic spray nozzles
(2007–2024)
 
AIChE Journal 57 #8 (2011)

Particle grinding by high-intensity ultrasound: Kinetic modeling and identification of breakage mechanisms
(2025–2035)
 
AIChE Journal 57 #8 (2011)

Separation of small organic ions from salts by ion-exchange membrane in electrodialysis
(2070–2078)
 
AIChE Journal 57 #8 (2011)

Pervaporation of methanol/dimethyl carbonate using SiO2 membranes with nano-tuned pore sizes and surface chemistry
(2079–2089)
 
AIChE Journal 57 #8 (2011)

Optimal process operation for the production of linear polyethylene resins with tailored molecular weight distribution
(2149–2163)
 
AIChE Journal 57 #8 (2011)

Reactive extrusion processing of polypropylene/TiO2 nanocomposites by in situ synthesis of the nanofillers: Experiments and modeling
(2174–2184)
 
AIChE Journal 57 #8 (2011)

Diffusion-enhanced hierarchically macro-mesoporous catalyst for selective hydrogenation of pyrolysis gasoline
(2198–2206)
 
AIChE Journal 57 #8 (2011)

A half-order approximation for the adsorption dynamics in a porous particle
(2282–2286)
 
AIChE Journal 57 #8 (2011)

******************************************************

Industrial & Engineering Chemistry Research 50 #14 (2011)
(Titles and Abstracts) (T)

Antimicrobial m-Aramid Nanofibrous Membrane for Nonpressure Driven Filtration
(8693–8697)
Industrial & Engineering Chemistry Research 50 #14 (2011)

****************************************************

Chemical Engineering Science 66  #18 (2011)
(Titles and Abstracts) (T)

Electrical capacitance tomography as a monitoring tool for high-shear mixing and granulation
(4090-4100) Chemical Engineering Science 66  #18 (2011)

A numerical study of multicomponent mass diffusion and convection in porous pellets for the sorption-enhanced steam methane reforming and desorption processes
( 4111-4126) Chemical Engineering Science 66  #18 (2011)

Three-dimensional CFD study of liquid–solid flow behaviors in tubular loop polymerization reactors: The effect of guide vane
( 4127-4137) Chemical Engineering Science 66  #18 (2011)

Sustainable acoustic and thermal insulation materials from elastomeric waste residues
( 4157-4171) Chemical Engineering Science 66  #18 (2011)

Modeling the melt blowing of viscoelastic materials
(4172-4183) Chemical Engineering Science 66  #18 (2011)

Titanate nanotubes-embedded chitosan nanocomposite membranes with high isopropanol dehydration performance
(4221-4228) Chemical Engineering Science 66  #18 (2011)

Transitional emulsion polymerisation: Zero-one to pseudo-bulk
(4251-4260) Chemical Engineering Science 66  #18 (2011)

***********************************************

 Industrial & Engineering Chemistry Research 50 #13 (2011)
(Titles and Abstracts) (T)

In Situ Polymerization of Graphene, Graphite Oxide, and Functionalized Graphite Oxide into Epoxy Resin and Comparison Study of On-the-Flame Behavior
(7772–7783)
Industrial & Engineering Chemistry Research 50 #13 (2011)

Two-Stage in Situ Intercalation Polymerization of Acrylic Copolymer/Montmorillonite Nanocomposites
(7784–7790)
Industrial & Engineering Chemistry Research 50 #13 (2011)

Homogeneous Synthesis and Characterization of Cellulose Acetate Butyrate (CAB) in 1-Allyl-3-Methylimidazolium Chloride (AmimCl) Ionic Liquid
(7808–7814)
Industrial & Engineering Chemistry Research 50 #13 (2011)

Semi-Interpenetrating Polymer Network Hydrogel Blend Microspheres of Gelatin and Hydroxyethyl Cellulose for Controlled Release of Theophylline
(7833–7840)
Industrial & Engineering Chemistry Research 50 #13 (2011)

Kinetics of Ring-Opening Polymerization of l,l-Lactide
(7927–7940)
Industrial & Engineering Chemistry Research 50 #13 (2011)

Kinetic Study of the Thermal Processing and Pyrolysis of Crosslinked Ethylene Vinyl Acetate–Polyethylene Mixtures
(7964–7976)
Industrial & Engineering Chemistry Research 50 #13 (2011)

Preparation and Properties of Multiwall Carbon Nanotubes/Polystyrene-Block-Polybutadiene-Block-Polystyrene Composites
(8016–8022)
Industrial & Engineering Chemistry Research 50 #13 (2011)

Optimization of Carbonization Process for Preparation of High Performance Hollow Fiber Carbon Membranes
(8065–8072)
Industrial & Engineering Chemistry Research 50 #13 (2011)

Design and Synthesis of Polymer-Bound Penta-aza Ligand for Selective Adsorptive Separation of Cobalt(II) from Zirconium(IV)
(8195–8203)
Industrial & Engineering Chemistry Research 50 #13 (2011)

New Excess Gibbs Energy Equation for Modeling the Thermodynamic and Transport Properties of Polymer Solutions and Nanofluids at Different Temperatures
(8245–8262)
Industrial & Engineering Chemistry Research 50 #13 (2011)

Effects of Pore-Forming Agents and Polymer Composition on the Properties of Novel Poly(N,N-Dimethylaminoethyl Methacrylate Sulfate-co-N,N-dimethylacrylamide) Hydrogels
(8295–8303)
Industrial & Engineering Chemistry Research 50 #13 (2011)

*********************************************

Chemical Engineering Progress 107 #7 (2011)
(Titles and Abstracts) (T)
Trade Journal

****************************************

Chemical Engineering (July 2011)
(Titles and Abstracts) (T)
Trade Journal

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Roger D. Corneliussen
Editor, Maro Polymer Links
Telephone: 610 883 0055

cornelrd@bee.net
www.maropolymeronline.com

Copyright 2012 by Roger D. Corneliussen

**Date of latest change; Page started 8/1/2011