Maro Publications

2011 Polyethylene Terephthalate (PET) Articles

Archives

11/25/2011

Hit Counter

Week 46 11/14 through 11/18

Week 45 11/7 through 11/11

Week 44 10/31 through 11/4

Week 42 10/17 through 10/21

Week 41 10/10 through 10/14

Week 40 10/3 through 10/7

September 2011

August 2011

July 2011

June 2011

May 2011

April 2011

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  

Week 46 11/14 through 11/18

Influence of Rubber Annealing on Behavior of the Three-Phase Model in PET Study by the Thermally Stimulated Current (TSC) Method
(591-601)  International Journal of Polymer Analysis and Characterization 16 #8 (2011)
Abstract

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  

Week 45 11/7 through 11/11

Thursday 11/10/2011

Nonisothermal crystallization behavior of biodegradable poly(butylene terephthalate-co-butylene adipate-co-ethylene terephthalate-co-ethylene adipate) copolyester
(2535–2541)
Polymer  Engineering &  Science 51 #12 (2011)

Thermo-mechanical, Degradation, and Interfacial Properties of Jute Fiber-reinforced PET-based Composite
(889-898)
Journal of Thermoplastic Composite Materials 24 #6 (2011)
Abstract

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  

Week 44 10/31 through 11/4

Wednesday 11/2/2011

Effect of addition of glycolysis products of poly(ethyleneterephthalate) wastes to urea-formaldehyde resin on its adhesion performance to wood substrates and formaldehyde emission
(2377–2383)
Journal of Applied Polymer  Science 123 #4 (2012)

Tuesday 11/1/2011

Synthesis of liquid crystalline polymers from polyethylene terephthalate and 4-acetoxybenzoic acid: A kinetic study
(1359–1369)
Journal of Applied Polymer  Science 123 #3 (2012)

Physicochemical and structural effects of electrolyte-induced delamination on polyethylene teraphthalate-coated steel plates
(1658–1666)
Journal of Applied Polymer  Science 123 #3 (2012)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  

Week 42 10/17 through 10/21

Wednesday 10/19/2011

Effect of high content of carbon black on non-isothermal crystallization behavior of poly(ethylene terephthalate)
(1633-1648)
Polymer Bulletin 67 #8 (2011)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  

Week 41 10/10 through 10/14

Thursday 10/13/2011

Efficiency Increase of Poly(ethylene terephthalate-co-isosorbide terephthalate) Synthesis using Bimetallic Catalytic Systems
(2114–2120)
Macromolecular Chemistry and Physics 212 #19 (2011)

Wednesday 10/12/2011

Chemical recycling of PET flakes into yarn
(520–525)
Journal of Applied Polymer  Science 123 #1 (2012)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  

Week 40 10/3 through 10/7

Thursday 10/6/2011

Kinetics of the hydrolytic depolymerization of poly(ethylene terephthalate) under microwave irradiation
(811-815)
Polymer Journal 43 #10 (2011)
Abstract

Wednesday 10/5/2011

Automated control of the preform reheating process in the manufacturing of PET containers. Part I. Definition of the problem and description of the controlled object (English abstract Polish article)
Polimery #10 (2011)

Microsecond Analysis of Quasi-Smectic Fibrillar Structure in the Continuous Fiber Drawing of Poly(ethylene terephthalate)
(7378–7384)
Macromolecules 44 #18 (2011)

Monday 10/3/2011

Fire-retardant poly(ethylene terephthalate) by combination of expandable graphite and layered clays for plastics and textiles
(383–396)
Fire and Materials 35 #6 (2011)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  

September 2011

Tuesday 9/20/2011

The selective recycling of mixed plastic waste of polylactic acid and polyethylene terephthalate by control of process conditions
(1970-1976) European Polymer Journal 47  #10 (2011)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  

Thursday 9/15/2011

Nanofibrillar Patterns on PET: The Influence of Plasma Parameters in Surface Morphology
(876–884)
Plasma Processes and Polymers 8 #9  (2011)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  

Tuesday 9/13/2011

Synthesis and physical-mechanical properties of polyurethane-polyisocyanurate foams based on PET-waste-derived modified polyols
(467-482)  
Journal of Cellular Plastics 47  #5 (2011)
Abstract

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  

Wednesday 9/7/2011

Recycled Polyethylene Terephthalate Filled Natural Rubber Compounds: Effects of Filler Loading and Types of Matrix
(429-449)
Journal of Elastomers and Plastics 43 #5 (2011)
Abstract

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  

Tuesday 9/6/2011

PET/PA nanocomposite blends with improved gas barrier properties: Effect of processing conditions
(3290–3297)
Journal of Applied Polymer  Science 122 #5 (2011)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  

August 2011

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  

Tuesday 8/23/2011

In situ synthesis of ZnO nanocrystal/PET hybrid nanofibers via electrospinning
(1360–1368)
Journal of Polymer Science B: Polymer Physics 49, #19 (2011)

Electrically conductive and optically transparent polyethylene terephthalate films coated with gold and silver by thermionic vacuum arc
(209-222)
Journal of Plastic Film and Sheeting 27  #3 (2011)
 Abstract

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  

Monday 8/15/2011

Viscosity, shear strength, and peel strength on poly(ethylene terephthalate) of (natural rubber)-based adhesives containing hybrid tackifiers
(209–212)
Journal of Vinyl and Additive Technology 17, #3 (2011)

Effect of Ionomer on Barrier and Mechanical Properties of PET/Organoclay Nanocomposites Prepared by Melt Compounding
(444-455)
International Polymer Processing #4 (2011)

Crystallization behavior and morphology of one-step reaction compatibilized microfibrillar reinforced isotactic polypropylene/poly(ethylene terephthalate) (iPP/PET) blends
(540-551)
Chinese Journal of Polymer Science 29, #5 (2011)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  

Thursday 8/11/2011

Effect of cyclotrimerization of bisphenol-A dicyanate monomer on poly(ethylene terephthalate) chain extension
(1791–1796)
Polymer  Engineering &  Science 51 #9 (2011)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  

Wednesday 8/10/2011

Synergistic effect of zinc oxide on the flame retardant and thermal properties of acrylonitrile–butadiene–styrene/poly(ethylene terephthalate)/ammonium polyphosphate systems
(2338–2344)
Journal of Applied Polymer  Science 122 #4 (2011)

Surface and adhesion properties of poly(ethylene glycol) on polyester(polyethylene terephthalate) fabric surface: Effect of air-atmospheric plasma treatment
(2621–2629)
Journal of Applied Polymer  Science 122 #4 (2011)

Thermal and mechanical behavior of unsaturated polyester [derived from poly(ethylene terephthalate) waste] and montmorillonite-filled nanocomposites synthesized by in situ polymerization
(2731–2740)
Journal of Applied Polymer  Science 122 #4 (2011)

Structure and stability of oligomer-polymer blends based on poly(ethylene terephthalate) deformed by crazing mechanism
(575-580)  
Colloid Journal 73 #4 (2011)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  

7/29/2011

Electrochromic properties of the polyethylene terephthalate derivative film-modified electrode
( 1283–1285)
Polymers for Advanced Technologies 22 #8 (2011)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  

7/26/2011

Investigation of CIGS Solar Cells on Polyethylene Terephthalate Substrates
(817-824)
International Journal of Polymeric Materials 60 #10 (2011)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  

7/14/2011

Assessing the Variable Molecular Architecture of Poly(ethylene terephthalate) Under Reactive Modification by Melt and Dilute Solution Rheology
(630–636)
Macromolecular Materials and Engineering 296 #7 (2011)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  

7/13/2011

Durable flame retardant finishing of PET/cotton blends using a Novel PVA-based phosphorus-nitrogen polymer
(342–353)
Journal of Applied Polymer  Science 122 #1 (2011)

Effect of kind and content of organo-modified clay on properties of PET nanocomposites
(384–392)
Journal of Applied Polymer  Science 122 #1 (2011)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  

7/7/2011

PREPARATION AND CHARACTERIZATION OF POLY(ETHYLENE TEREPHTHALATE)/BOEHMITE NANOCOMPOSITES
(469-476) Polymers and Polymer Composites 19 #6 (2011)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  

7/6/2011

Rheology and SANS on PET-b-PLAc-b-P(DMAEMAq) Triblock Copolymers: Impact of the PET and Polyelectrolyte Chain Length
(5326–5335)
Macromolecules 44 #13 (2011)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx  

June

Effect of recycled poly(ethylene terephthalate) content on properties of extruded poly(ethylene terephthalate) sheets
(65-86)
Journal of Plastic Film and Sheeting 27  #1-2 (2011)
Abstract

Diamond-like carbon coated on polyethylene terephthalate by Thermionic Vacuum Arc
(127-137)
Journal of Plastic Film and Sheeting 27  #1-2 (2011)
Abstract

EFFECTS OF MWNTS-COOH ON THE COMBUSTION BEHAVIOUR AND THE FLAME RETARDANCY PROPERTIES OF PET
(9-14)
Polymers and Polymer Composites 19 #1 (2011)

Poly(ethylene terephthalate)/carbon nanotube composites prepared with chemically treated carbon nanotubes
(1286–1300)
 
Polymer  Engineering &  Science 51 #7 (2011)

Processability enhancement of poly(lactic acid-co-ethylene terephthalate) by blending with poly(ethylene-co-vinyl acetate), poly(3-hydroxybutyrate-co-3-hydroxyvalerate), and poly(butylene succinate)
(275-290)
Polymer Bulletin 67 #2 (2011)

Nonisothermal crystallization behavior and UV screening ability of poly(ethylene terephthalate)/carbon black transparent films
(321-331)
Polymer Bulletin 67 #2 (2011)

Recrystallization processes in cold-crystallized poly(ethylene terephthalate): Interplay between structure evolution and conformational relaxation
(3155-3162)  Polymer 52 #14 (2011)

Enzymatic Surface Hydrolysis of PET: Effect of Structural Diversity on Kinetic Properties of Cutinases from Thermobifida
(4632–4640)
Macromolecules 44 #12 (2011)

7,855,238
Molding compositions containing polyalkylene terephthalates and modified polybutylene terephthalate (PBT) random copolymers derived from PET

High-energy heavy-ion irradiation effects in makrofol-KG polycarbonate and PET
(3014–3019)
Journal of Applied Polymer  Science 121 #5 (2011)

Estimating the strain-strength characteristics of nanothick nonmetallic coatings deposited onto poly(ethylene terephthalate) films
(303-310)
Polymer Science: Series A 53 #4 (2011)

Thermal and Mechanical Properties of Polyethylene Terephthalate/Polycarbonate Nanocomposites Modified by Lanthanum Acetyl Acetonate Hydrate
(635 – 645)
Polymer - Plastics Technology and Engineering 50 #6 (2011)

Mubarak of the University of Jordan, Jordan, attempted to improve the thermal and mechanical properties of polyethylene terephthalate/polycarbonate (PET/PC) blends with nanofil 9.  Blending was carried out in a Brabender plasticorder, the chopped composites were then extruded using a single screw extruder to prepare samples for the thermal and mechanical testing.  Lanthanum acetyl acetonate hydrate was used as a catalyst for potential transesterification reactions that could occur in the melt.   (RDC 6/8/2011)

Wettability characteristics of poly(ethylene terephthalate) films treated by atmospheric pressure plasma and ultraviolet excimer light
(545-551)
Polymer Journal 43 #6 (2011)
Abstract

Preparation and characterization of PET/clay nanocomposites by melt compounding
(1178–1187)
Polymer  Engineering &  Science 51 #6 (2011)

Processing and characterization of recycled poly(ethylene terephthalate) blends with chain extenders, thermoplastic elastomer, and/or poly(butylene adipate-co-terephthalate)
(1023–1032)
Polymer  Engineering &  Science 51 #6 (2011)

Structural changes of poly(ethylene isophthalate) subjected to gamma irradiation
(1297-1300) Polymer Degradation and Stability 96 #7 (2011)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 

Growth and optical properties of Ag clusters deposited on poly(ethylene terephthalate)
(#
275710)
Nanotechnology 22 #27 (2011)

Analysis of atmospheric pressure plasma parameters during treatment of polyethylene terephthalate films
(1875–1884)
Journal of Applied Polymer  Science 121 #4 (2011)

Bonding characteristics of recycled polyethylene terephthalate (PET) fibers coated with maleic anhydride grafted polypropylene in cement-based composites
(1908–1915)
Journal of Applied Polymer  Science 121 #4 (2011)

Polypropylene/wasted poly(ethylene terephthalate) fabric composites compatibilized by two different methods: Crystallization and melting behavior, crystallization morphology, and kinetics
(1972–1981)
Journal of Applied Polymer  Science 121 #4 (2011)

Modelling Behaviour of PET for Stretch and Micro-Blow Moulding Applications Using an Elasto-Visco-Plastic Material Model
(173-181)  
International Polymer Processing #2 (2011)

Influence of surface activation by plasma and nanoparticle adsorption on the morphology, thermal stability and combustion behavior of PET fabrics  
(
893-902) European Polymer Journal 47  #5 (2011)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 

Grafting of polyacrylamide from poly(ethylene terephthalate) films
(1254–1261)
 Journal of Applied Polymer  Science 121 #3 (2011)

Microbial modification of polyethylene terephthalate fabric
(690–695)
Journal of Applied Polymer  Science 121 #2 (2011)

Preparation and properties of poly(ethylene terephthalate)/inorganic whiskers composites
(604–611)
Journal of Applied Polymer  Science 121 #1 (2011)

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Roger D Corneliussen
Editor
Telephone: 610 363 9920
Fax: 610 363 9921
Email: cornelrd@bee.net
SPE Online Encyclopedia
www.maropolymeronline.com

© 2011 Roger D. Corneliussen

Page was started 4/14/2011