Current Awareness
Processing
3/9/2009
Warning: Sometimes the older links no longer work. Go to the US Patent Patent number search page, copy the Patent number into the search box and search. For the articles, use your browser to go the Journal site.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Processing
2/16/2010
7,662,332
Electro-blowing technology for fabrication of fibrous articles and its
applications of hyaluronan
2/16/2010
7,662,325
Polyhydroxyalkanoic acid fibers with high strength, fibers with high strength
and high modulus of elasticity, and processes for producing the same
2/16/2010
7,662,324
Polymer processing aid and method for processing polymers
2/16/2010
7,662,321
Nano-scaled graphene plate-reinforced composite materials and method of
producing same
2/16/2010
7,662,320
Method and device for separating pasty materials
2/16/2010
7,662,319
System and method for two-shot molding crash pad
2/16/2010
7,662,318
Method for post-injection in mold lamination with an adhesively coated
functionalized film
2/16/2010
7,661,953
Process for producing exterior member/seal member assembly
2/16/2010
7,661,952
Hot runner device and injection molding machine
2/16/2010
7,661,951
Apparatus for injection molding
2/16/2010
7,661,950
Device for separating molds
2/16/2010
7,661,945
Apparatus for extruding and blow molding multicolored plastic articles
2/16/2010
7,661,944
Tire vulcanizing device
2/16/2010
7,661,943
Mold for vulcanizing an unvulcanized tire blank
2/16/2010
7,661,942
Device for molding a keyhole sipe in a tire tread
2/16/2010
7,661,941
Machine with vibratable section
2/16/2010
7,661,871
Apparatus for storing, mixing, metering, and injecting polymeric slurries into
pipelines
2/19/2010
New insight into the action of supercritical carbon dioxide for grafting of
maleic anhydride onto isotactic polypropylene by reactive extrusion
(1621-1626)
Chemical Engineering Science 65 #5 (2010)
2/19/2010
Characteristic analysis on a reactive extrusion process for the imidization
of poly(styrene-co-maleic anhydride) with aniline
(1781-1789)
Chemical Engineering Science 65 #5 (2010)
2/19/2010
The Influence of the Measuring/Viewing Angle on the Color of Injection-Molded
Plastics
(292 – 306)
International Journal of Polymeric Materials 59 #4 (2010)
2/19/2010
Fibrous membranes of cellulose acetate and
poly(vinyl pyrrolidone) by electrospinning method: Preparation and
characterization
(p 1873-1878)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
2/19/2010
Poly(ethylene-2,6-naphthalate) nanofiber prepared
by carbon dioxide laser supersonic drawing
(p 1913-1919)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
2/19/2010
Preparation, characterization, and antibacterial
properties of electrospun polyacrylonitrile fibrous membranes containing silver
nanoparticles
(p 1967-1976)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
2/19/2010
Effect of protein-loading on properties of
wet-spun poly(L,D-lactide) multifilament
fibers
(p 2174-2180)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
2/19/2010
Electrospun ultrathin nylon fibers for protective
applications
(p 2181-2187)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
2/19/2010
Fabrication of water-stable electrospun
polyacrylic acid-based nanofibrous mats for removal of copper (II) ions in
aqueous solution
(p 2409-2417)
Journal of Applied Polymer Science 116 #4 (2010)
Abstract
2/19/2010
Experimental Investigation of Injection Molding of
Wood/Plastics Composites
(456-465)
Journal of Reinforced Plastics and Composites 29 #3 (2010)
[Abstract]
2/19/2010
Evolution of Fiber Morphologies during Poly (acrylonitrile)
Electrospinning
(p 155-161)
Macromolecular Symposia 287 #1 (2010)
Abstract
XXXXXXXXXXXXXXXXXXXXXXXXXX
Roger D.
Corneliussen
Editor
Telephone: 610 883 0055
rcorneliussen@4spe.org
www.maropolymeronline.com
Copyright 2010 by Roger D. Corneliussen