Copyright 2009 by Roger D. Corneliussen
Below are links to the new articles by journals. A click should take you to the journal website. This is a great variation in where one ends up. In some cases, a click will take you to the issue in other cases a click will take you to the website and you must do a few more clicks to get to the issue. This is controlled by the publisher and not Maro. Fortunately, with a little practice, this should not be a serious problem. (RDC)
Polymer
Track (News)
Updated daily
Week 43 (10/19-10/23)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
01.
The Analyst 134 #11 (2009)
(Titles and Abstracts)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
02.
Biomaterials 30 #35 (2009)
(Titles
and Abstracts)
Photoinitiated polymerization of PEG-diacrylate
with lithium phenyl-2,4,6-trimethylbenzoylphosphinate: polymerization rate and
cytocompatibility
(6702-6707)
The Analyst 134 #11 (2009)
Persistence of antimicrobial activity through
sustained release of triclosan from pegylated silicone elastomers
(6739-6747)
The Analyst 134 #11 (2009)
The effects of rhBMP-2 released from
biodegradable polyurethane/microsphere composite scaffolds on new bone formation
in rat femora
(6768-6779)
The Analyst 134 #11 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
03.
Chemical
Week
Titles and Abstracts) Weekly (H)
Trade
Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
04.
Colloid and Polymer Science 287 #11 (2009)
(Titles and Abstracts)
Synthesis of phosphonate-functionalized polystyrene and poly(methyl methacrylate)
particles and their kinetic behavior in miniemulsion polymerization
(1261-1271) Colloid
and Polymer Science 287 #11 (2009)
Poly(aniline-co-p-phenylenediamine)/MWCNT nanocomposites via in situ
microemulsion: synthesis and characterization
(1273-1280) Colloid
and Polymer Science 287 #11 (2009)
Adhesion properties of physically crosslinked elastic gels of poly(sodium
acrylate)–poly(acrylic acid) mixtures evaluated by a point contact method
(1281-1293) Colloid
and Polymer Science 287 #11 (2009)
Polypeptide hybrid copolymers as selective micellar nanocarriers in nonaqueous
media
(1295-1304) Colloid
and Polymer Science 287 #11 (2009)
Selective encapsulation-release and photodegradation characteristics of organic
dyes by cross-linked fluoroalkyl end-capped oligomeric nanocomposites possessing
aromatic siloxane segments as core units
(1317-1323) Colloid
and Polymer Science 287 #11 (2009)
Synthesis of ordered spiral and ring-like polypyrrole nanowires in
cetyltrimethylammounium bromide crystalline suspension
(1325-1330) Colloid
and Polymer Science 287 #11 (2009)
Novel poly(fluorinated imide)s containing naphthalene pendant group: synthesis
and characterization
(1331-1337) Colloid
and Polymer Science 287 #11 (2009)
Preparation and characterization of poly (N-isopropylacrylamide)/polyvinylamine
core-shell microgels
(1339-1346 ) Colloid
and Polymer Science 287 #11 (2009)
Conducting polystyrene/polyaniline blend through template-assisted emulsion
polymerization
(1347-1354) Colloid
and Polymer Science 287 #11 (2009)
A novel gel polymer electrolyte based on lithium salt with an ethyl cellulose
(1355-1358) Colloid
and Polymer Science 287 #11 (2009)
Preparation of novel cross-linked fluoroalkyl end-capped cooligomeric
nanoparticles–encapsulated cytochrome c in water and ionic liquids
(1359-1363) Colloid
and Polymer Science 287 #11 (2009)
Control of micellization induced by disproportionation of
2,2,6,6-tetramethylpiperidine-1-oxyl supported on side chains of a block
copolymer
(1365-1368) Colloid
and Polymer Science 287 #11 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
05.
Modern
Plastics
(2009)
(Titles and Abstracts)
Weekly
Trade
Magazine
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
06.
Polymer Science: Series B 51 #9-10 (2009)
(Titles and Abstracts)
Polymerization of Methyl Methacrylate by Ziegler–Natta Type Catalyst
Systems:
Fe(acac)3–AlEt2Br and Fe(acac)3–ZnEt2
(232 - ??)
Polymer Science: Series B 51 #9-10 (2009)
abstract
Synthesis of Chitosan-Stabilized Au Nanoparticles with Controllable
Sizes
(243 - ??)
Polymer Science: Series B 51 #9-10 (2009)
abstract
Review
Synthesis and Application of Polyhedral Oligosilsesquioxanes and Spherosilicates
(249 - ??)
Polymer Science: Series B 51 #9-10 (2009)
abstract
Electrophysical Properties of Polymers Based on Ni(II) Complexes
(263 - ??)
Polymer Science: Series B 51 #9-10 (2009)
abstract
Interdiffusion and Phase Equilibrium in Systems Based
on Cellulose Nitrates and Low-Volatile Solvents
(268 - ??)
Polymer Science: Series B 51 #9-10 (2009)
abstract
Review
Short-Range Orientational Order in Polymer–Solvent Systems
(271 - ??)
Polymer Science: Series B 51 #9-10 (2009)
abstract
************************************************
Polymer Science: Series B 51 #11-12 (2009)
(Titles and Abstracts)
Radical Polymerization of N-Vinylcaprolactam in Benzene Solutions
in a Wide Conversion Range
(299 - ??)
Polymer Science: Series B 51 #11-12 (2009)
abstract
The Conduction Switching Effect in Thin Polymer Layers
(305 _ ??)
Polymer Science: Series B 51 #11-12 (2009)
abstract
Simulation of Butadiene Rubber Synthesis on Cobalt-
and Neodymium-Containing Catalytic Systems in Reactor Cascades with Heat Removal
(310 - ??)
Polymer Science: Series B 51 #11-12 (2009)
abstract
Copolymerization of Vinyl Chloride with 1-Vinyl-4,5,6,7-Tetrahydroindole
and 2-Methyl-5-Vinylpyridine
(315 - ??)
Polymer Science: Series B 51 #11-12 (2009)
abstract
Effect of pH of a Medium on the Direction of Reactions of
Isothiocyanates with Amino Acids
(321 - ??)
Polymer Science: Series B 51 #11-12 (2009)
abstract
The Number of Active Centers and Propagation Rate Constant in Ethylene
Polymerization with a Homogeneous Catalyst Based on Cobalt 2,6-Bis[imino]pyridyl
Complex with Methylaluminoxane Activator
(326 - ??)
Polymer Science: Series B 51 #11-12 (2009)
abstract
Living Polymerization of 4-Methyl-2-pentyne and
1-Trimethylsilyl-1-propyne
Initiated by NbCl5–Ph4Sn Catalyst
(330 - ??)
Polymer Science: Series B 51 #11-12 (2009)
abstract
Chromatographic Mass of a Polymer and Its Use for Determining
the Molecular Mass Characteristics
(334 - ??)
Polymer Science: Series B 51 #11-12 (2009)
abstract
The Influence of Light on the Conduction Switching Effect in Thin
Polymer Films
(340 - ??)
Polymer Science: Series B 51 #11-12 (2009)
abstract
Molecular Mass Characteristics and Solution Behavior of Some Cardo
Polybenzimidazoles
(345 - ??)
Polymer Science: Series B 51 #11-12 (2009)
abstract
Kinetic Nonuniformity of a Titanium Catalyst in the Polymerization of
Butadiene:
Effect of Intensifying Stirring of the Reaction Mixture
(351 - ??)-
Polymer Science: Series B 51 #11-12 (2009)
abstract
Polymerization of Styrene and Methyl Methacrylate in the Presence
of 2,2-Diethyl-4,5,5-Trimethyl-2,5-Dihydroimidazol-1-Oxyl
(356 - ??)
Polymer Science: Series B 51 #11-12 (2009)
abstract
Ytterbium(II) Iodide As an Agent Simultaneously Controlling Molecular
Mass
Distribution and Stoichiometry of Poly(methyl methacrylate)
(362 - ??)
Polymer Science: Series B 51 #11-12 (2009)
abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
07.
Accounts of
Chemical Research 42 #10 (2009)
(Titles and Abstracts)
Supramolecular Interactions in Chemomechanical Polymers
(1489–1500)
Accounts of Chemical Research 42 #10 (2009)
Development and Application of FI Catalysts for Olefin Polymerization: Unique
Catalysis and Distinctive Polymer Formation
(1532–1544)
Accounts of Chemical Research 42 #10 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
08.
Angewandte Chemie International Edition 48 #45 (2009)
(Titles and Abstracts)
Polymeric Janus Particles
(p 8412-8421)
Angewandte Chemie International Edition 48 #45 (2009)
Abstract
Polyelectrolyte Microcapsules as Antigen Delivery
Vehicles To Dendritic Cells: Uptake, Processing, and Cross-Presentation of
Encapsulated Antigens
(p 8485-8489)
Angewandte Chemie International Edition 48 #45 (2009)
Abstract
High Internal Phase Emulsions Stabilized Solely
by Microgel Particles
(p 8490-8493)
Angewandte Chemie International Edition 48 #45 (2009)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
09.
Chemical Engineering Communications 197 #1 (2010)
(Titles
and Abstracts) (T)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
10.
Chemistry of Materials 21 #20 (2009)
(Titles
and Abstracts)
Ordering Magnetic Molecules within Nanoporous Crystalline Polymers
(4750–4752)
Chemistry of Materials 21 #20 (2009)
Cation Cross-Linked Ionic Liquids as Anion-Exchange Materials
(4756–4758)
Chemistry of Materials 21 #20 (2009)
Multifunctional Roles of TiO2 Nanoparticles for Architecture of Complex
Core−Shells and Hollow Spheres of SiO2−TiO2−Polyaniline System
(4811–4823)
Chemistry of Materials 21 #20 (2009)
Self-Assembly of Shape Controlled Hierarchical Porous Thin Films: Mesopores and
Nanoboxes
(4846–4850)
Chemistry of Materials 21 #20 (2009)
Optically pH and H2O2 Dual Responsive Composite Colloids through the Directed
Assembly of Organic Dyes on Responsive Microgels
(4905–4913)
Chemistry of Materials 21 #20 (2009)
Defect Engineering in π-Conjugated Polymers
(4914–4919)
Chemistry of Materials 21 #20 (2009)
Microporous Metal Organic Framework Membrane on Porous Support Using the Seeded
Growth Method
(4920–4924)
Chemistry of Materials 21 #20 (2009)
Honeycomb-Patterned Hybrid Films and Their Template Applications via A Tunable
Amphiphilic Block Polymer/Inorganic Precursor System
(4977–4983)
Chemistry of Materials 21 #20 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
11.
Chinese Physics B 18 #10 (2009)
(Titles
and Abstracts; Full PDF versions of Articles are available free for 30 days after
publication)
Photochemical kinetics for holographic grating
formation in phenanthrenequinone doped poly (methyl methacrylate) photopolymer
(4326-4332)
Chinese Physics B 18 #10 (2009)
Abstract
Effect of polyacrylamide on morphology and
electromagnetic properties of chrysanthemum-like ZnO particles
(4552-4557)
Chinese Physics B 18 #10 (2009)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
12.
Macromolecules 42 #20 (2009)
(Titles and Abstracts)
Large-Strain Mechanical Behavior of Model Block Copolymer Adhesives
(7605–7615)
Macromolecules 42 #20 (2009)
Oligomer-to-Polymer Transition of Poly(propylene glycol) Revealed by Dielectric
Normal Modes
(7616–7618)
Macromolecules 42 #20 (2009)
Solution-Processable Star-Shaped Photovoltaic Organic Molecule with
Triphenylamine Core and Benzothiadiazole−Thiophene Arms
(7619–7622)
Macromolecules 42 #20 (2009)
Novel Design Solving the Conductivity vs Water-Uptake Trade-Off for Polymer
Electrolyte Membrane by Bicontinuous Crystalline/Amorphous Morphology of Block
Copolymer
(7627–7630)
Macromolecules 42 #20 (2009)
Liquid Crystalline Features of Optically Active Poly(methylene-1,3-cyclopentane)
(7631–7633)
Macromolecules 42 #20 (2009)
A Polymer-Based Ultrasensitive Metal Ion Sensor
(7634–7637)
Macromolecules 42 #20 (2009)
Incorporation of Different End Groups in Conjugated Polymers Using Functional
Nickel Initiators
(7638–7641)
Macromolecules 42 #20 (2009)
Synthesis of Regioblock Polybutadiene with CoCl2-Based Catalyst via Reversible
Coordination of Lewis Base
(7642–7643)
Macromolecules 42 #20 (2009)
Preparation of Photoreactive Oligomers by ADMET Polymerization of
[(C5H4(CH2)8CH═CH2)Mo(CO)3]2
(7644–7649)
Macromolecules 42 #20 (2009)
Synthesis of Aminooxy End-Functionalized pNIPAAm by RAFT Polymerization for
Protein and Polysaccharide Conjugation
(7650–7656)
Macromolecules 42 #20 (2009)
Trapping of Thiol-Terminated Acrylate Polymers with Divinyl Sulfone To Generate
Well-Defined Semitelechelic Michael Acceptor Polymers
(7657–7663)
Macromolecules 42 #20 (2009)
Simultaneous Orthogonal Chemoligations on Multiresponsive Microgels
(7664–7669)
Macromolecules 42 #20 (2009)
Effect of Initiators on the Kumada Catalyst-Transfer Polycondensation Reaction
(7670–7677)
Macromolecules 42 #20 (2009)
Long-Range Chirality Transfer in Free Radical Polymerization of Bulky Vinyl
Monomers Containing Laterally Attached p-Terphenyl Groups
(7678–7688)
Macromolecules 42 #20 (2009)
Synthesis and Modification of Alternating Copolymers Based on Vinyl Ethers,
Chlorotrifluoroethylene, and Hexafluoropropylene
(7689–7700)
Macromolecules 42 #20 (2009)
Rapid Block Copolymer Synthesis by Microwave-Assisted RAFT Polymerization
(7701–7708)
Macromolecules 42 #20 (2009)
New Click Chemistry: Polymerization Based on 1,3-Dipolar Cycloaddition of a Homo
Ditopic Nitrile N-Oxide and Transformation of the Resulting Polymers into
Reactive Polymers
(7709–7717)
Macromolecules 42 #20 (2009)
Examination of the Thermal and Thermomechanical Behavior of Novel Cyanate Ester
Homopolymers and Blends with Low Coefficients of Thermal Expansion
(7718–7735)
Macromolecules 42 #20 (2009)
An Investigation of Free-Radical Copolymerization Propagation Kinetics of
Styrene and 2-Hydroxyethyl Methacrylate
(7736–7744)
Macromolecules 42 #20 (2009)
Application of the “Strathclyde Route” to Branched Vinyl Polymers in Suspension
Polymerization: Architectural, Thermal, and Rheological Characterization of the
Derived Branched Products
(7745–7752)
Macromolecules 42 #20 (2009)
Propagation Rate Coefficient of Free-Radical Polymerization of Partially and
Fully Ionized Methacrylic Acid in Aqueous Solution
(7753–7761)
Macromolecules 42 #20 (2009)
Synthesis of Monomeric and Dimeric Copper(II) Carboxylates Bearing Polymerizable
Groups and Their Performance in the Copolymerization with MMA
(7762–7771)
Macromolecules 42 #20 (2009)
Synthesis and Characterization of Biopolymer Composites from the Inside Out
(7772–7780)
Macromolecules 42 #20 (2009)
A Mechanistic Study of α-(Amino acid)-N-carboxyanhydride Polymerization:
Comparing Initiation and Termination Events in High-Vacuum and Traditional
Polymerization Techniques
(7781–7788)
Macromolecules 42 #20 (2009)
Thermostable α-Diimine Nickel(II) Catalyst for Ethylene Polymerization: Effects
of the Substituted Backbone Structure on Catalytic Properties and Branching
Structure of Polyethylene
(7789–7796)
Macromolecules 42 #20 (2009)
Microkinetic Modeling of Structural Properties of Poly(vinyl chloride)
(7797–7810)
Macromolecules 42 #20 (2009)
Enzymatic Synthesis and Structural and Thermal Properties of
Poly(ω-pentadecalactone-co-butylene-co-succinate)
(7811–7819)
Macromolecules 42 #20 (2009)
Precise Synthesis of Exact Graft Copolymers, Poly(methyl methacrylate)-exact
graft-polystyrene, by Iterative Methodology Using a Specially Designed
In-Chain-Functionalized AB Diblock Copolymer Anion
(7820–7827)
Macromolecules 42 #20 (2009)
Environmentally Compliant Fluoro-Containing MMA/nBA Colloidal Dispersions;
Synthesis, Molecular Modeling, and Coalescence
(7828–7835)
Macromolecules 42 #20 (2009)
Enzyme and Transition-Metal-Complex Catalyzed Synthesis of Polyphenols with
Pendant Oligo(p-phenylene) and Their Optical, Electrochemical, and Thermal
Properties
(7836–7845)
Macromolecules 42 #20 (2009)
Formation of Polyimide Nanoparticles in Heterophase with an Ionic Liquid as
Continuous Phase
(7846–7853)
Macromolecules 42 #20 (2009)
Thermo- and Light-Responsive Polymers Containing Photoswitchable Azobenzene End
Groups
(7854–7862)
Macromolecules 42 #20 (2009)
Glass Transition Breadths and Composition Profiles of Weakly, Moderately, and
Strongly Segregating Gradient Copolymers: Experimental Results and Calculations
from Self-Consistent Mean-Field Theory
(7863–7876)
Macromolecules 42 #20 (2009)
Moisture Effects on Antheraea pernyi Silk’s Mechanical Property
(7877–7880)
Macromolecules 42 #20 (2009)
Synthesis, Characterization, and Gas Permeation Properties of a Novel Group of
Polymers with Intrinsic Microporosity: PIM-Polyimides
(7881–7888)
Macromolecules 42 #20 (2009)
Onset Kinetics of Thermal Degradation of Ultrathin Polyacrylamide Films
(7889–7896)
Macromolecules 42 #20 (2009)
Phase Behavior of Polystyrene-b-poly(methyl methacrylate) Diblock Copolymer
(7897–7902)
Macromolecules 42 #20 (2009)
Insoluble Patterns of Cross-Linkable Conjugated Polymers from Blend Demixing in
Spin Cast Films
(7903–7912)
Macromolecules 42 #20 (2009)
Role of Surface Reorganization on Preferential Adsorption of Macromolecular
Ensembles at the Solid/Fluid Interface
(7913–7918)
Macromolecules 42 #20 (2009)
Dewetting of PMMA on PS−Brush Substrates
(7919–7923)
Macromolecules 42 #20 (2009)
Fabrication of Poly(vinylidene
fluoride−trifluoroethylene)/Poly(3,4-ethylenedioxythiophene)−Polystyrene
Sulfonate Composite Nanofibers via Electrospinning
(7924–7929)
Macromolecules 42 #20 (2009)
Simple Procedure for Polystyrene-Based Nanocomposite Preparation by
Vapor-Phase-Assisted Surface Polymerization
(7930–7935)
Macromolecules 42 #20 (2009)
Synthesis and Micellization of Linear−Dendritic Copolymers and Their
Solubilization Ability for Poorly Water-Soluble Drugs
(7936–7944)
Macromolecules 42 #20 (2009)
Fractionation of Poly(vinyl acetate) and the Phase Behavior of End-Group
Modified Oligo(vinyl acetate)s in CO2
(7945–7952)
Macromolecules 42 #20 (2009)
Synthesis and Self-Assembly of Fluorescent Micelles from
Poly(ferrocenyldimethylsilane-b-2-vinylpyridine-b-2,5-di(2′-ethylhexyloxy)-1,4-phenylvinylene)
Triblock Copolymer
(7953–7960)
Macromolecules 42 #20 (2009)
Explicit Sequence of Styrene/Methyl Methacrylate Gradient Copolymers Synthesized
by Forced Gradient Copolymerization with Nitroxide-Mediated Controlled Radical
Polymerization
(7961–7968)
Macromolecules 42 #20 (2009)
Interdiffusion of Short Chain Oligomers into an Entangled Polymer Film
(7969–7973)
Macromolecules 42 #20 (2009)
Defined Oligo(p-phenylene−butadiynylene) Rods
(7974–7978)
Macromolecules 42 #20 (2009)
Metastable Untwisted States in Cholesteric Elastomers
(7979–7981)
Macromolecules 42 #20 (2009)
Confinement Effects on Chain and Glass Dynamics in Immiscible Polymer Blends
(7982–7985)
Macromolecules 42 #20 (2009)xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
13.
.
Chinese
Physics Letters
26 #10 (2009)
(Titles
and Abstracts; Full PDF versions of Articles are available free for 30 days after
publication)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
14.
Coatings
World
13 #10 (2009)
(Titles, Abstracts and Articles)
Trade Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
15.
Colloids and Surfaces A: Physicochemical and Engineering Aspects 350 #1-3 (2009)
(Titles and Abstracts)
Development of mullite and mullite/Al2O3
precursor sols for electrophoretic deposition of oxidation protection coatings
(13-21)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 350 #1-3 (2009)
Interactions between cationic gemini/conventional
surfactants with polyvinylpyrrolidone: Specific conductivity and dynamic light
scattering studies
(51-56)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 350 #1-3 (2009)
Effect of chemical composition on properties of
pH-responsive poly(acrylamide-co-acrylic acid) microgels prepared by inverse
microemulsion polymerization
(87-90)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 350 #1-3 (2009)
Polyethyleneimine-functionalized poly(methyl
methacrylate) colloidal nanoparticles for directly coating natural rubber sheet
(114-120)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 350 #1-3 (2009)
Forming water-soluble CdSe/ZnS QDs using
amphiphilic polymers, stearyl methacrylate/methylacrylate copolymers with
different hydrophobic moiety ratios and their optical properties and stability
(121-129)
Colloids and Surfaces A: Physicochemical and Engineering Aspects 350 #1-3 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
16.
Colloids
and Surfaces B: Biointerfaces 74 #1 (2009)
(Titles and Abstracts)
Surface active properties of chitosan and its
derivatives
(1-16)
Colloids
and Surfaces B: Biointerfaces 74 #1 (2009)
Characteristics and antioxidant activity of
catechin-loaded calcium pectinate gel beads prepared by internal gelation
(17-22)
Colloids
and Surfaces B: Biointerfaces 74 #1 (2009)
Effect of end groups of poly(n-butyl
methacrylate) on its biocompatibility
(45-50)
Colloids
and Surfaces B: Biointerfaces 74 #1 (2009)
Rheological properties of reversible
thermo-setting in situ gelling solutions with the methylcellulose–polyethylene
glycol–citric acid ternary system (2): Effects of various water-soluble polymers
and salts on the gelling temperature
(56-58)
Colloids
and Surfaces B: Biointerfaces 74 #1 (2009)
Biofouling studies on nanoparticle-based metal
oxide coatings on glass coupons exposed to marine environment
(75-83)
Colloids
and Surfaces B: Biointerfaces 74 #1 (2009)
Surface modification of a titanium alloy with a
phospholipid polymer prepared by a plasma-induced grafting technique to improve
surface thromboresistance
(96-102)
Colloids
and Surfaces B: Biointerfaces 74 #1 (2009)
Development of liposomes containing ethanol for
skin delivery of temoporfin: Characterization and
in vitro penetration studies
(114-122)
Colloids
and Surfaces B: Biointerfaces 74 #1 (2009)
Two-dimensional scaffold layer formations on a
solid surface through xanthan polysaccharide: Temperature effect
(136-139)
Colloids
and Surfaces B: Biointerfaces 74 #1 (2009)
Electrochemical behavior and voltammetric
determination of tryptophan based on 4-aminobenzoic acid polymer film modified
glassy carbon electrode
(167-171)
Colloids
and Surfaces B: Biointerfaces 74 #1 (2009)
Composition dependent structural modulations in
transparent poly(vinyl alcohol) hydrogels
(186-190)
Colloids
and Surfaces B: Biointerfaces 74 #1 (2009)
Impact of chitosan coating of anionic liposomes
on clearance rate, mucosal and systemic immune responses following nasal
administration in rabbits
(225-229)
Colloids
and Surfaces B: Biointerfaces 74 #1 (2009)
Physicochemical properties of cross-linked and
acetylated starches and products of their hydrolysis in continuous recycle
membrane reactor
(238-243)
Colloids
and Surfaces B: Biointerfaces 74 #1 (2009)
Adsorption mechanism of Cu2+ from
aqueous solution by chitosan-coated magnetic nanoparticles modified with α-ketoglutaric
acid
(244-252)
Colloids
and Surfaces B: Biointerfaces 74 #1 (2009)
Incorporation methods for cholic acid
chitosan-g-mPEG self-assembly micellar system containing camptothecin
(253-259)
Colloids
and Surfaces B: Biointerfaces 74 #1 (2009)
Self-assembled polypeptide-block-poly(vinylpyrrolidone)
as prospective drug-delivery systems
(284-292)
Colloids
and Surfaces B: Biointerfaces 74 #1 (2009)
Hyaluronic acid and chitosan-DNA complex
multilayered thin film as surface-mediated nonviral gene delivery system
(298-303)
Colloids
and Surfaces B: Biointerfaces 74 #1 (2009)
Simultaneous determination of hydroquinone and
catechol at PASA/MWNTs composite film modified glassy carbon electrode
(317-321)
Colloids
and Surfaces B: Biointerfaces 74 #1 (2009)
A novel poly(taurine) modified glassy carbon
electrode for the simultaneous determination of epinephrine and dopamine
(322-327)
Colloids
and Surfaces B: Biointerfaces 74 #1 (2009)
Drug loaded poly[Lac(Glc-Leu)] microparticles:
Formulation and release characteristics
(336-339)
Colloids
and Surfaces B: Biointerfaces 74 #1 (2009)
The effect of formulation variables on the
characteristics of insulin-loaded poly(lactic-co-glycolic acid) microspheres
prepared by a single phase oil in oil solvent evaporation method
(340-349)
Colloids
and Surfaces B: Biointerfaces 74 #1 (2009)
Nanoscale evaluation of lubricity on
well-defined polymer brush surfaces using QCM-D and AFM
(350-357)
Colloids
and Surfaces B: Biointerfaces 74 #1 (2009)
Modification of polyethylene with Pluronics
F127 for improvement of blood compatibility
(362-365)
Colloids
and Surfaces B: Biointerfaces 74 #1 (2009)
Patterning of neural stem cells on poly(lactic-co-glycolic
acid) film modified by hydrophobin
(370-374)
Colloids
and Surfaces B: Biointerfaces 74 #1 (2009)
Patterning of biomolecules on a poly(
-caprolactone)
film surface functionalized by ion implantation
(375-379)
Colloids
and Surfaces B: Biointerfaces 74 #1 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
17. Composites Part A: Applied Science and Manufacturing 40 #11 (2009)
A review of shape memory polymer composites and
blends
(1661-1672)
Composites Part A: Applied Science and Manufacturing 40 #11 (2009)
Quantification of uncertainty modelling in
stochastic analysis of FRP composites
(1673-1684)
Composites Part A: Applied Science and Manufacturing 40 #11 (2009)
A comprehensive filling and tooling force
analysis for rigid mould LCM processes
(1685-1697)
Composites Part A: Applied Science and Manufacturing 40 #11 (2009)
Assessment of interfacial bonding between
polymer threads and epoxy resin by transverse fibre bundle (TFB) tests
(1698-1707)
Composites Part A: Applied Science and Manufacturing 40 #11 (2009)
Foam processing of polyethylene ionomers with
supercritical CO2
(1708-1716)
Composites Part A: Applied Science and Manufacturing 40 #11 (2009)
Investigation of the electrical conductivity of
HDPE composites filled with bundle-like MWNTs
(1717-1721Composites Part A: Applied Science and Manufacturing 40 #11 (2009)
Interfacial and hydrophobic evaluation of glass
fiber/CNT–epoxy nanocomposites using electro-micromechanical technique and
wettability test
(1722-1731)
Composites Part A: Applied Science and Manufacturing 40 #11 (2009)
An orthotropic variant of the equilibrium gap
method applied to the analysis of a biaxial test on a composite material
(1732-1740)
Composites Part A: Applied Science and Manufacturing 40 #11 (2009)
Mode III interlaminar fracture of carbon/epoxy
laminates using a four-point bending plate test
(1741-1746)
Composites Part A: Applied Science and Manufacturing 40 #11 (2009)
All-poly(ethylene terephthalate) composites by
film stacking of oriented tapes
(1747-1755)
Composites Part A: Applied Science and Manufacturing 40 #11 (2009)
Mechanical performance of carbon fibre-reinforced
composites based on stitched and bindered preforms
(1756-1763)
Composites Part A: Applied Science and Manufacturing 40 #11 (2009)
Multiple Data Set (MDS) weak-link scaling
analysis of jute fibres
(1764-1771)
Composites Part A: Applied Science and Manufacturing 40 #11 (2009)
Wood–plastics composites with better fire
retardancy and durability performance
(1772-1776)
Composites Part A: Applied Science and Manufacturing 40 #11 (2009)
Effect of fiber surface modification on the
mechanical and water absorption characteristics of sisal/polyester composites
fabricated by resin transfer molding
(1777-1784)
Composites Part A: Applied Science and Manufacturing 40 #11 (2009)
Effects of the treatment of attapulgite and
filler contents on tensile properties of PTFE and attapulgite reinforced fabric
composites
( 1785-1791)
Composites Part A: Applied Science and Manufacturing 40 #11 (2009)
Influence of carboxylic functionalization of
MWCNTs on the thermal properties of MWCNTs/DGEBA/EMI-2,4 nanocomposites
(1792-1797)
Composites Part A: Applied Science and Manufacturing 40 #11 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
18.
Composites
Science and Technology 69 #14 (2009)
(Titles and Abstracts)
Fracture toughness improvement of CFRP
laminates by dispersion of cup-stacked carbon nanotubes
(2268-2273)
Composites
Science and Technology 69 #14 (2009)
Synthesis and characterization of carbon
nanotube-reinforced epoxy: Correlation between viscosity and elastic modulus
(2274-2280)
Composites
Science and Technology 69 #14 (2009)
A new analytical method for particulate
composites
(2281-2284)
Composites
Science and Technology 69 #14 (2009)
Layered silicates nanocomposite matrix for
improved fiber reinforced composites properties
(2285-2292)
Composites
Science and Technology 69 #14 (2009)
Size reduction of WO3 nanoparticles
by ultrasound irradiation and its applications in structural nanocomposites
(2293-2300)
Composites
Science and Technology 69 #14 (2009)
Compressive static strength model for impact
damaged laminates
(2301-2307)
Composites
Science and Technology 69 #14 (2009)
Compression fatigue failure of CFRP laminates
with impact damage
(2308-2314)
Composites
Science and Technology 69 #14 (2009)
DCB test simulation of stitched CFRP laminates
using interlaminar tension test results
(2315-2322)
Composites
Science and Technology 69 #14 (2009)
Fracture behavior and toughening mechanism in
Zanchor reinforced composites under mode II loading
(2323-2330)
Composites
Science and Technology 69 #14 (2009)
Compressive response of Z-pinned woven glass
fiber textile composite laminates: Experiments
(2331-2337)
Composites
Science and Technology 69 #14 (2009)
Compressive response of Z-pinned woven glass
fiber textile composite laminates: Modeling and computations
(2338-2344)
Composites
Science and Technology 69 #14 (2009)
Fractographic observations on delamination
growth and the subsequent migration through the laminate
(2345-2351)
Composites
Science and Technology 69 #14 (2009)
Panel stiffener debonding analysis using a
shell/3D modeling technique
(2352-2362)
Composites
Science and Technology 69 #14 (2009)
Prediction of delamination in braided composite
T-piece specimens
(2363-2367)
Composites
Science and Technology 69 #14 (2009)
Effect of variation in fibre volume fraction on
modes I and II delamination behaviour of 5HS woven composites manufactured by
RTM
(2368-2375)
Composites
Science and Technology 69 #14 (2009)
Delamination analysis of carbon fibre
reinforced laminates: Evaluation of a special step drill
(2376-2382)
Composites
Science and Technology 69 #14 (2009)
Finite element simulation of delamination
growth in composite materials using LS-DYNA
(2383-2391)
Composites
Science and Technology 69 #14 (2009)
Energy absorption capability of nanocomposites:
A review
(2392-2409)
Composites
Science and Technology 69 #14 (2009)
Upscaling of viscoelastic properties of
highly-filled composites: Investigation of matrix–inclusion-type morphologies
with power-law viscoelastic material response
(2410-2420)
Composites
Science and Technology 69 #14 (2009)
Improving the prediction of tensile failure in
unidirectional fibre composites by introducing matrix shear yielding
(2421-2427)
Composites
Science and Technology 69 #14 (2009)
Influence of prepreg conditions on the void
occurrence and tensile properties of woven glass fiber-reinforced polyimide
composites
(2428-2433)
Composites
Science and Technology 69 #14 (2009)
High-strength nanocomposite based on
fibrillated chemi-thermomechanical pulp
(2434-2437)
Composites
Science and Technology 69 #14 (2009)
Chemical composition and molecular structure of
fibers from transgenic flax producing polyhydroxybutyrate, and mechanical
properties and platelet aggregation of composite materials containing these
fibers
(2438-2446)
Composites
Science and Technology 69 #14 (2009)
Microstructures and improved wear resistance of
3D needled C/SiC composites with graphite filler
(2447-2453)
Composites
Science and Technology 69 #14 (2009)
Electromechanical response of semiconducting
carbon–polyimide nanocomposite thin films
(2454-2459)
Composites
Science and Technology 69 #14 (2009)
Characterizing and modeling the non-linear
viscoelastic tensile deformation of a glass fiber reinforced polypropylene
(2460-2466)
Composites
Science and Technology 69 #14 (2009)
Novel processing and characterization of Cu/CNF
nanocomposite for high thermal conductivity applications
(2474-2484)
Composites
Science and Technology 69 #14 (2009)
Effect of RF-plasma deposition parameters on
the composition and properties of organic layers deposited on glass fibers
(2485-2490)
Composites
Science and Technology 69 #14 (2009)
Functional gradient effects explain the low
transverse shear modulus in spruce – Full-field strain data and a micromechanics
model
(2491-2496)
Composites
Science and Technology 69 #14 (2009)
Halloysite–epoxy nanocomposites with improved
particle dispersion through ball mill homogenisation and chemical treatments
(2497-2505)
Composites
Science and Technology 69 #14 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
19.
Composite Structures 92 #2 (2010)
(Titles and Abstracts)
Static and dynamic analysis of soft core
sandwich panels with through-thickness deformation
(201-215)
Composite Structures 92 #2 (2010)
Experimental study on vibration and damping of
curved panel treated with constrained viscoelastic layer
(233-243)
Composite Structures 92 #2 (2010)
Deformation in viscoelastic sandwich composites
subject to moisture diffusion
(254-264)
Composite Structures 92 #2 (2010)
Transient dynamic analysis of tapered FRP
composite transmission poles using finite element method
(275-283)
Composite Structures 92 #2 (2010)
SectionBuilder: An innovative finite element
tool for analysis and design of composite rotor blade cross-sections
(284-294)
Composite Structures 92 #2 (2010)
Fracture mechanisms and failure analysis of
carbon fibre/toughened epoxy composites subjected to compressive loading
(295-305)
Composite Structures 92 #2 (2010)
Development and testing of a self-deformed
composite material
(306-311)
Composite Structures 92 #2 (2010)
Prediction of intermediate crack debonding
failure in FRP-strengthened reinforced concrete beams
(322-329)
Composite Structures 92 #2 (2010)
FE homogenized limit analysis model for masonry
strengthened by near surface bed joint FRP bars
(330-338)
Composite Structures 92 #2 (2010)
Shape optimization of filament wound
articulated pressure vessels based on non-geodesic trajectories
(339-346)
Composite Structures 92 #2 (2010)
Impact response of three-dimensional stitched
sandwich composite
(347-353)
Composite Structures 92 #2 (2010)
An experimental study on the bearing strength
behavior of Al2O3 particle filled glass fiber reinforced
epoxy composites pinned joints
(354-363)
Composite Structures 92 #2 (2010)
Sensitivity analysis of frequency response
functions of composite sandwich plates containing viscoelastic layers
(364-376)
Composite Structures 92 #2 (2010)
Different CFRP strengthening techniques for
prestressed hollow core concrete slabs: Experimental study and analytical
investigation
(401-411)
Composite Structures 92 #2 (2010)
Study on impact properties of through-thickness
stitched foam sandwich composites
(412-421)
Composite Structures 92 #2 (2010)
Through-thickness compressive strength of a
carbon/epoxy composite laminate
(480-487)
Composite Structures 92 #2 (2010)
Extending onshore pipeline repair to offshore
steel risers with carbon–fiber reinforced composites
(499-507)
Composite Structures 92 #2 (2010)
Thermal buckling behavior of composite
laminated plates
(508-514)
Composite Structures 92 #2 (2010)
Modeling and damage repair of woven
thermoplastic composites subjected to low velocity impact
(523-531)
Composite Structures 92 #2 (2010)
In-plane compression of sandwich panels with
debonds
(532-540)
Composite Structures 92 #2 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
20.
Construction
and Building Materials
24 #1 (2010)
(Titles and Abstracts)
Properties of poly(vinyl alcohol) fiber
reinforced high-performance organic aggregate cementitious material: Converting
brittle to plastic
(1-10)
Construction
and Building Materials
24 #1 (2010)
Rehabilitation of splice connections of wood
trusses with FRP composites
(37-45)
Construction
and Building Materials
24 #1 (2010)
The effect of wind suction on flat roofs: An
experimental and analytical study of mechanically fastened waterproofing systems
(105-112)
Construction
and Building Materials
24 #1 (2010)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
21.
Corrosion Science 51 #11 (2009)
(Titles and Abstracts)
Galvanic corrosion of polyacrylnitrile (PAN)
and pitch based short carbon fibres in polyetheretherketone (PEEK) composites
(2524-2528)
Corrosion Science 51 #11 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
22.
Current Opinion in Colloid & Interface Science 14 #6 (2009)
(Titles and Abstracts)
Quasielastic neutron scattering in soft matter
(381-390)
Current Opinion in Colloid & Interface Science 14 #6 (2009)
Recent developments and applications of NSE in
soft matter
(391-395)
Current Opinion in Colloid & Interface Science 14 #6 (2009)
High brilliance small-angle X-ray scattering
applied to soft matter
(409-415)
Current Opinion in Colloid & Interface Science 14 #6 (2009)
New “smart” poly(NIPAM) microgels and
nanoparticle microgel hybrids: Properties and advances in characterisation
(438-450)
Current Opinion in Colloid & Interface Science 14 #6 (2009)
Scattering from polymer-like micelles
(451-454)
Current Opinion in Colloid & Interface Science 14 #6 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
23.
Advanced
Composite Materials
18, #4 (2009)
(Titles
and Abstracts
Synthesis of Needle-Like Aragonite Crystals in the Presence of Magnesium
Chloride and Their Application in Papermaking
(315-326)
Advanced
Composite Materials
18, #4 (2009)
Hybrid Nanocomposites: Processing and Properties
(365-379)
Advanced
Composite Materials
18, #4 (2009)
Centrifugal Infiltration Process of Fibrous Tubular Preform by Al-Cu Alloy
(381-394)
Advanced
Composite Materials
18, #4 (2009)
Influence of Biaxial Loads on Impact Fracture of High-Strength Membrane
Materials
(395-413)
Advanced
Composite Materials
18, #4 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
24.
Advanced Drug Delivery Reviews 61 #13 (2009)
(Titles and Abstracts)
Functional polymers as therapeutic agents:
Concept to market place
(1121-1130)
Advanced Drug Delivery Reviews 61 #13 (2009)
Development of HPMA copolymer–anticancer
conjugates: Clinical experience and lessons learnt
(1131-1148)
Advanced Drug Delivery Reviews 61 #13 (2009)
Clinical experience with anthracycline
antibiotics–HPMA copolymer–human immunoglobulin conjugates
(1149-1158)
Advanced Drug Delivery Reviews 61 #13 (2009)
Design and development of polymer conjugates as
anti-angiogenic agents
(1159-1176)
Advanced Drug Delivery Reviews 61 #13 (2009)
PEG conjugates in clinical development or use
as anticancer agents: An overview
(1177-1188)
Advanced Drug Delivery Reviews 61 #13 (2009)
Design and development of IT-101, a
cyclodextrin-containing polymer conjugate of camptothecin
(1189-1192)
Advanced Drug Delivery Reviews 61 #13 (2009)
XMT-1001, a novel polymeric camptothecin
pro-drug in clinical development for patients with advanced cancer
(1193-1202)
Advanced Drug Delivery Reviews 61 #13 (2009)
Combination therapy: Opportunities and
challenges for polymer–drug conjugates as anticancer nanomedicines
(1203-1213)
Advanced Drug Delivery Reviews 61 #13 (2009)
ProLindac™ (AP5346): A review of the
development of an HPMA DACH platinum Polymer Therapeutic
(1214-1219)
Advanced Drug Delivery Reviews 61 #13 (2009)
Polymeric carriers: Preclinical safety and the
regulatory implications for design and development of polymer therapeutics
(1220-1231)
Advanced Drug Delivery Reviews 61 #13 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
25.
Applied Catalysis A: General 370 #1-2 (2009)
Titles and Abstracts
Synthesis of pillared clays with Al13-Fe
and Al13-Fe-Ce polymers in solid state assisted by microwave and
ultrasound: Characterization and catalytic activity
(7-15)
Applied Catalysis A: General 370 #1-2 (2009)
Ru(salophen)Cl supported on polystyrene-bound
imidazole: An efficient and robust heterogeneous catalyst for epoxidation of
alkenes with sodium periodate
(66-71)
Applied Catalysis A: General 370 #1-2 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
26.
Color
Research & Application
34 #6 (2009)
(Titles and Abstracts)
Quantitative camouflage paint selection for the
CH-47F helicopter
(p 406-416)
Color Research & Application 34 #6 (2009)
Abstract
Superficial degradation evaluated through color
change in weathered orange LLDPE
(p 458-463)
Color Research & Application 34 #6 (2009)
Abstract
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
27.
e-Polymers (10/21/2009) (113)
(Titles, Abstracts and Articles)
113[2009] Poly(N-isopropylacrylamide) gel beads prepared by water-in-oil
suspension polymerization for the adsorption of fluorescently tagged hepcidin
e-Polymers (10/21/2009) (113)
[Abstract]
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
28.
European Coatings Net, October (2009)
(Titles, Abstracts and Articles)
Trade
Journal
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
29.
Nanotechnology 20 #46 (2009)
(Titles and Abstracts; Full PDF versions of Articles are available free
for 30 days after publication)
No articles selected
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
30.
Dalton Transactions #41 (2009)
(Titles
and Abstracts)
Chemistry of BDI*M(2+) complexes (M = Mg, Zn) and their role in lactide
polymerization where BDI* is the anion derived from methylenebis(C-tBu,
N-2,6-diisopropylphenyl)imine BDI*H
(9237 - 9245)
Dalton Transactions #41 (2009)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Roger D. Corneliussen
Editor
Maro Polymer Links
Tel: 610 363 9920
Fax: 610 363 9921
E-Mail: cornelrd@bee.net
*****************************************************
Copyright 2009 by Roger D. Corneliussen.
No part of this transmission is to be duplicated in any manner or forwarded by electronic mail without the express written
permission of Roger D. Corneliussen
**************************************